u-boot/include/configs/nokia_rx51.h
Tom Rini 6f6b7cfa89 Convert all of CONFIG_CONS_INDEX to Kconfig
This converts the following to Kconfig:
   CONFIG_CONS_INDEX

We have existing entries for this option in a number of places, with
different guards on them.  They're also sometimes used for things not
directly inside of the serial driver.  First, introduce a new symbol to
guard the use of CONFIG_CONS_INDEX, so that in the case where we don't
need this for the serial driver, but for some other use, we can still do
it.  Next, consolidate all of these into the single entry in
drivers/serial/Kconfig.  Finally, introduce CONS_INDEX_[023456] so that
we can imply a correct value here to make the defconfig side of this
smaller.

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Rework a lot of the logic here, such that I took authorship from
Adam, but kept his S-o-B line]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-16 10:28:52 -04:00

356 lines
9.4 KiB
C

/*
* (C) Copyright 2011-2012
* Pali Rohár <pali.rohar@gmail.com>
*
* (C) Copyright 2010
* Alistair Buxton <a.j.buxton@gmail.com>
*
* Derived from Beagle Board code:
* (C) Copyright 2006-2008
* Texas Instruments.
* Richard Woodruff <r-woodruff2@ti.com>
* Syed Mohammed Khasim <x0khasim@ti.com>
*
* Configuration settings for the Nokia RX-51 aka N900.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
*/
#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */
#define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51
/*
* Nokia X-Loader loading secondary image to address 0x80400000
* NOLO loading boot image to random place, so it doesn't really
* matter what we set this to. We have to copy u-boot to this address
*/
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap.h>
#include <asm/arch/mem.h>
#include <linux/stringify.h>
/* Clock Defines */
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK >> 1)
#define CONFIG_MISC_INIT_R
#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */
#define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */
#define CONFIG_INITRD_TAG /* enable passing initrd */
#define CONFIG_REVISION_TAG /* enable passing revision tag*/
#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
/*
* Size of malloc() pool
*/
#define CONFIG_ENV_SIZE (128 << 10)
#define CONFIG_UBI_SIZE (512 << 10)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
(128 << 10))
/*
* Hardware drivers
*/
/*
* NS16550 Configuration
*/
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
/*
* select serial console configuration
*/
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
#define CONFIG_SERIAL3 3 /* UART3 on RX-51 */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
/* USB device configuration */
#define CONFIG_USB_DEVICE
#define CONFIG_USBD_VENDORID 0x0421
#define CONFIG_USBD_PRODUCTID 0x01c8
#define CONFIG_USBD_MANUFACTURER "Nokia"
#define CONFIG_USBD_PRODUCT_NAME "N900"
/* commands to include */
#define CONFIG_SYS_I2C
/*
* TWL4030
*/
#define CONFIG_TWL4030_LED
#define CONFIG_TWL4030_KEYPAD
#define GPIO_SLIDE 71
/*
* Board ONENAND Info.
*/
#define PART1_NAME "bootloader"
#define PART1_SIZE 128
#define PART1_MULL 1024
#define PART1_SUFF "k"
#define PART1_OFFS 0x00000000
#define PART1_MASK 0x00000003
#define PART2_NAME "config"
#define PART2_SIZE 384
#define PART2_MULL 1024
#define PART2_SUFF "k"
#define PART2_OFFS 0x00020000
#define PART2_MASK 0x00000000
#define PART3_NAME "log"
#define PART3_SIZE 256
#define PART3_MULL 1024
#define PART3_SUFF "k"
#define PART3_OFFS 0x00080000
#define PART3_MASK 0x00000000
#define PART4_NAME "kernel"
#define PART4_SIZE 2
#define PART4_MULL 1024*1024
#define PART4_SUFF "m"
#define PART4_OFFS 0x000c0000
#define PART4_MASK 0x00000000
#define PART5_NAME "initfs"
#define PART5_SIZE 2
#define PART5_MULL 1024*1024
#define PART5_SUFF "m"
#define PART5_OFFS 0x002c0000
#define PART5_MASK 0x00000000
#define PART6_NAME "rootfs"
#define PART6_SIZE 257280
#define PART6_MULL 1024
#define PART6_SUFF "k"
#define PART6_OFFS 0x004c0000
#define PART6_MASK 0x00000000
#ifdef ONENAND_SUPPORT
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#endif
/* Watchdog support */
#define CONFIG_HW_WATCHDOG
/*
* Framebuffer
*/
/* Video console */
#define CONFIG_VIDEO_LOGO
#define VIDEO_FB_16BPP_PIXEL_SWAP
#define VIDEO_FB_16BPP_WORD_SWAP
#define CONFIG_SPLASH_SCREEN
/* functions for cfb_console */
#define VIDEO_KBD_INIT_FCT rx51_kp_init()
#define VIDEO_TSTC_FCT rx51_kp_tstc
#define VIDEO_GETC_FCT rx51_kp_getc
#ifndef __ASSEMBLY__
struct stdio_dev;
int rx51_kp_init(void);
int rx51_kp_tstc(struct stdio_dev *sdev);
int rx51_kp_getc(struct stdio_dev *sdev);
#endif
/* Environment information */
#ifdef CONFIG_MTDPARTS_DEFAULT
#define MTDPARTS "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
#else
#define MTDPARTS
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
MTDPARTS \
"usbtty=cdc_acm\0" \
"stdin=vga\0" \
"stdout=vga\0" \
"stderr=vga\0" \
"setcon=setenv stdin ${con};" \
"setenv stdout ${con};" \
"setenv stderr ${con}\0" \
"sercon=setenv con serial; run setcon\0" \
"usbcon=setenv con usbtty; run setcon\0" \
"vgacon=setenv con vga; run setcon\0" \
"slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
"switchmmc=mmc dev ${mmcnum}\0" \
"kernaddr=0x82008000\0" \
"initrdaddr=0x84008000\0" \
"scriptaddr=0x86008000\0" \
"fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
"${loadaddr} ${mmcfile}\0" \
"kernload=setenv loadaddr ${kernaddr};" \
"setenv mmcfile ${mmckernfile};" \
"run fileload\0" \
"initrdload=setenv loadaddr ${initrdaddr};" \
"setenv mmcfile ${mmcinitrdfile};" \
"run fileload\0" \
"scriptload=setenv loadaddr ${scriptaddr};" \
"setenv mmcfile ${mmcscriptfile};" \
"run fileload\0" \
"scriptboot=echo Running ${mmcscriptfile} from mmc " \
"${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
"kernboot=echo Booting ${mmckernfile} from mmc " \
"${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
"kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
"${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
"attachboot=echo Booting attached kernel image ...;" \
"setenv setup_omap_atag 1;" \
"bootm ${attkernaddr};" \
"setenv setup_omap_atag\0" \
"trymmcscriptboot=if run switchmmc; then " \
"if run scriptload; then " \
"run scriptboot;" \
"fi;" \
"fi\0" \
"trymmckernboot=if run switchmmc; then " \
"if run kernload; then " \
"run kernboot;" \
"fi;" \
"fi\0" \
"trymmckerninitrdboot=if run switchmmc; then " \
"if run initrdload; then " \
"if run kernload; then " \
"run kerninitrdboot;" \
"fi;" \
"fi; " \
"fi\0" \
"trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
"setenv mmckernfile uImage; run trymmckernboot\0" \
"trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
"setenv mmcpart 2; run trymmcpartboot;" \
"setenv mmcpart 3; run trymmcpartboot;" \
"setenv mmcpart 4; run trymmcpartboot\0" \
"trymmcboot=if run switchmmc; then " \
"setenv mmctype fat;" \
"run trymmcallpartboot;" \
"setenv mmctype ext2;" \
"run trymmcallpartboot;" \
"setenv mmctype ext4;" \
"run trymmcallpartboot;" \
"fi\0" \
"emmcboot=setenv mmcnum 1; run trymmcboot\0" \
"sdboot=setenv mmcnum 0; run trymmcboot\0" \
"menucmd=bootmenu\0" \
"bootmenu_0=Attached kernel=run attachboot\0" \
"bootmenu_1=Internal eMMC=run emmcboot\0" \
"bootmenu_2=External SD card=run sdboot\0" \
"bootmenu_3=U-Boot boot order=boot\0" \
"bootmenu_delay=30\0" \
""
#define CONFIG_PREBOOT \
"setenv mmcnum 1; setenv mmcpart 1;" \
"setenv mmcscriptfile bootmenu.scr;" \
"if run switchmmc; then " \
"setenv mmcdone true;" \
"setenv mmctype fat;" \
"if run scriptload; then true; else " \
"setenv mmctype ext2;" \
"if run scriptload; then true; else " \
"setenv mmctype ext4;" \
"if run scriptload; then true; else " \
"setenv mmcdone false;" \
"fi;" \
"fi;" \
"fi;" \
"if ${mmcdone}; then " \
"run scriptboot;" \
"fi;" \
"fi;" \
"if run slide; then true; else " \
"setenv bootmenu_delay 0;" \
"setenv bootdelay 0;" \
"fi"
#define CONFIG_POSTBOOTMENU \
"echo;" \
"echo Extra commands:;" \
"echo run sercon - Use serial port for control.;" \
"echo run usbcon - Use usbtty for control.;" \
"echo run vgacon - Use framebuffer/keyboard.;" \
"echo run sdboot - Boot from SD card slot.;" \
"echo run emmcboot - Boot internal eMMC memory.;" \
"echo run attachboot - Boot attached kernel image.;" \
"echo"
#define CONFIG_BOOTCOMMAND \
"run sdboot;" \
"run emmcboot;" \
"run attachboot;" \
"echo"
#define CONFIG_MENU_SHOW
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
/* default load address */
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
/*
* OMAP3 has 12 GP timers, they can be driven by the system clock
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
* This rate is divided by a local divisor.
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 2
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
/*
* FLASH and environment organization
*/
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE 0x800
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
* Attached kernel image
*/
#define SDRAM_SIZE 0x10000000 /* 256 MB */
#define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
#define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */
#define KERNEL_OFFSET 0x40000 /* 256 kB */
#define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET)
#define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE)
/* Reserve protected RAM for attached kernel */
#define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1)
#endif /* __CONFIG_H */