mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
94 lines
3.3 KiB
C
94 lines
3.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Based on Linux i.MX iomux-v3.h file:
|
|
* Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
|
|
* <armlinux@phytec.de>
|
|
*
|
|
* Copyright (C) 2016 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#ifndef __MACH_IOMUX_H__
|
|
#define __MACH_IOMUX_H__
|
|
|
|
/*
|
|
* build IOMUX_PAD structure
|
|
*
|
|
* This iomux scheme is based around pads, which are the physical balls
|
|
* on the processor.
|
|
*
|
|
* - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
|
|
* things like driving strength and pullup/pulldown.
|
|
* - Each pad can have but not necessarily does have an output routing register
|
|
* (IOMUXC_SW_MUX_CTL_PAD_x).
|
|
* - Each pad can have but not necessarily does have an input routing register
|
|
* (IOMUXC_x_SELECT_INPUT)
|
|
*
|
|
* The three register sets do not have a fixed offset to each other,
|
|
* hence we order this table by pad control registers (which all pads
|
|
* have) and put the optional i/o routing registers into additional
|
|
* fields.
|
|
*
|
|
* The naming convention for the pad modes is SOC_PAD_<padname>__<padmode>
|
|
* If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
|
|
*
|
|
* IOMUX/PAD Bit field definitions
|
|
*
|
|
* MUX_CTRL_OFS: 0..15 (16)
|
|
* SEL_INPUT_OFS: 16..31 (16)
|
|
* MUX_MODE: 32..37 (6)
|
|
* SEL_INP: 38..41 (4)
|
|
* PAD_CTRL + NO_PAD_CTRL: 42..60 (19)
|
|
* reserved: 61-63 (3)
|
|
*/
|
|
|
|
typedef u64 iomux_cfg_t;
|
|
|
|
#define MUX_CTRL_OFS_SHIFT 0
|
|
#define MUX_CTRL_OFS_MASK ((iomux_cfg_t)0xffff << MUX_CTRL_OFS_SHIFT)
|
|
#define MUX_SEL_INPUT_OFS_SHIFT 16
|
|
#define MUX_SEL_INPUT_OFS_MASK ((iomux_cfg_t)0xffff << \
|
|
MUX_SEL_INPUT_OFS_SHIFT)
|
|
|
|
#define MUX_MODE_SHIFT 32
|
|
#define MUX_MODE_MASK ((iomux_cfg_t)0x3f << MUX_MODE_SHIFT)
|
|
#define MUX_SEL_INPUT_SHIFT 38
|
|
#define MUX_SEL_INPUT_MASK ((iomux_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
|
|
#define MUX_PAD_CTRL_SHIFT 42
|
|
#define MUX_PAD_CTRL_MASK ((iomux_cfg_t)0x7ffff << MUX_PAD_CTRL_SHIFT)
|
|
|
|
#define MUX_PAD_CTRL(x) ((iomux_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
|
|
|
|
#define IOMUX_PAD(pad_ctrl_ofs, mux_ctrl_ofs, mux_mode, sel_input_ofs, \
|
|
sel_input, pad_ctrl) \
|
|
(((iomux_cfg_t)(mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) | \
|
|
((iomux_cfg_t)(mux_mode) << MUX_MODE_SHIFT) | \
|
|
((iomux_cfg_t)(pad_ctrl) << MUX_PAD_CTRL_SHIFT) | \
|
|
((iomux_cfg_t)(sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT)| \
|
|
((iomux_cfg_t)(sel_input) << MUX_SEL_INPUT_SHIFT))
|
|
|
|
#define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | \
|
|
MUX_PAD_CTRL(pad))
|
|
|
|
|
|
#define IOMUX_CONFIG_MPORTS 0x20
|
|
#define MUX_MODE_MPORTS ((iomux_v3_cfg_t)IOMUX_CONFIG_MPORTS << \
|
|
MUX_MODE_SHIFT)
|
|
|
|
/* Bit definition below needs to be fixed acccording to ulp rm */
|
|
|
|
#define NO_PAD_CTRL (1 << 18)
|
|
#define PAD_CTL_OBE_ENABLE (1 << 17)
|
|
#define PAD_CTL_IBE_ENABLE (1 << 16)
|
|
#define PAD_CTL_DSE (1 << 6)
|
|
#define PAD_CTL_ODE (1 << 5)
|
|
#define PAD_CTL_SRE_FAST (0 << 2)
|
|
#define PAD_CTL_SRE_SLOW (1 << 2)
|
|
#define PAD_CTL_PUE (1 << 1)
|
|
#define PAD_CTL_PUS_UP ((1 << 0) | PAD_CTL_PUE)
|
|
#define PAD_CTL_PUS_DOWN ((0 << 0) | PAD_CTL_PUE)
|
|
|
|
|
|
void mx7ulp_iomux_setup_pad(iomux_cfg_t pad);
|
|
void mx7ulp_iomux_setup_multiple_pads(iomux_cfg_t const *pad_list,
|
|
unsigned count);
|
|
#endif /* __MACH_IOMUX_H__*/
|