u-boot/board/emulation/qemu-arm/qemu-arm.c
Tuomas Tynkkynen 861b85c482 ARM: qemu-arm: Fix qemu_arm64_defconfig for QEMU 3.0
QEMU 3.0 introduced additional memory-mapped regions for PCI-E ECAM and
MMIO. Thus we need to add them to our MMU map or U-Boot will crash with
a Synchronous Abort during PCI-E probing when it tries to access the
unmapped ECAM memory area.

Reported-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Tested-by: Jonathan Gray <jsg@jsg.id.au>
2018-09-05 22:14:37 -04:00

83 lines
1.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2017 Tuomas Tynkkynen
*/
#include <common.h>
#include <fdtdec.h>
#ifdef CONFIG_ARM64
#include <asm/armv8/mmu.h>
static struct mm_region qemu_arm64_mem_map[] = {
{
/* Flash */
.virt = 0x00000000UL,
.phys = 0x00000000UL,
.size = 0x08000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
/* Lowmem peripherals */
.virt = 0x08000000UL,
.phys = 0x08000000UL,
.size = 0x38000000,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* RAM */
.virt = 0x40000000UL,
.phys = 0x40000000UL,
.size = 255UL * SZ_1G,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
/* Highmem PCI-E ECAM memory area */
.virt = 0x4010000000ULL,
.phys = 0x4010000000ULL,
.size = 0x10000000,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* Highmem PCI-E MMIO memory area */
.virt = 0x8000000000ULL,
.phys = 0x8000000000ULL,
.size = 0x8000000000ULL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* List terminator */
0,
}
};
struct mm_region *mem_map = qemu_arm64_mem_map;
#endif
int board_init(void)
{
return 0;
}
int dram_init(void)
{
if (fdtdec_setup_mem_size_base() != 0)
return -EINVAL;
return 0;
}
int dram_init_banksize(void)
{
fdtdec_setup_memory_banksize();
return 0;
}
void *board_fdt_blob_setup(void)
{
/* QEMU loads a generated DTB for us at the start of RAM. */
return (void *)CONFIG_SYS_SDRAM_BASE;
}