mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-16 00:03:24 +00:00
c05ed00afb
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
372 lines
8.7 KiB
C
372 lines
8.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* max98090.c -- MAX98090 ALSA SoC Audio driver
|
|
*
|
|
* Copyright 2011 Maxim Integrated Products
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <audio_codec.h>
|
|
#include <div64.h>
|
|
#include <dm.h>
|
|
#include <i2c.h>
|
|
#include <i2s.h>
|
|
#include <log.h>
|
|
#include <sound.h>
|
|
#include <asm/gpio.h>
|
|
#include <linux/delay.h>
|
|
#include "maxim_codec.h"
|
|
#include "max98090.h"
|
|
|
|
/*
|
|
* Sets hw params for max98090
|
|
*
|
|
* @priv: max98090 information pointer
|
|
* @rate: Sampling rate
|
|
* @bits_per_sample: Bits per sample
|
|
*
|
|
* @return -EIO for error, 0 for success.
|
|
*/
|
|
int max98090_hw_params(struct maxim_priv *priv, unsigned int rate,
|
|
unsigned int bits_per_sample)
|
|
{
|
|
int error;
|
|
unsigned char value;
|
|
|
|
switch (bits_per_sample) {
|
|
case 16:
|
|
maxim_i2c_read(priv, M98090_REG_INTERFACE_FORMAT, &value);
|
|
error = maxim_bic_or(priv, M98090_REG_INTERFACE_FORMAT,
|
|
M98090_WS_MASK, 0);
|
|
maxim_i2c_read(priv, M98090_REG_INTERFACE_FORMAT, &value);
|
|
break;
|
|
default:
|
|
debug("%s: Illegal bits per sample %d.\n",
|
|
__func__, bits_per_sample);
|
|
return -1;
|
|
}
|
|
|
|
/* Update filter mode */
|
|
if (rate < 240000)
|
|
error |= maxim_bic_or(priv, M98090_REG_FILTER_CONFIG,
|
|
M98090_MODE_MASK, 0);
|
|
else
|
|
error |= maxim_bic_or(priv, M98090_REG_FILTER_CONFIG,
|
|
M98090_MODE_MASK, M98090_MODE_MASK);
|
|
|
|
/* Update sample rate mode */
|
|
if (rate < 50000)
|
|
error |= maxim_bic_or(priv, M98090_REG_FILTER_CONFIG,
|
|
M98090_DHF_MASK, 0);
|
|
else
|
|
error |= maxim_bic_or(priv, M98090_REG_FILTER_CONFIG,
|
|
M98090_DHF_MASK, M98090_DHF_MASK);
|
|
|
|
if (error < 0) {
|
|
debug("%s: Error setting hardware params.\n", __func__);
|
|
return -EIO;
|
|
}
|
|
priv->rate = rate;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Configures Audio interface system clock for the given frequency
|
|
*
|
|
* @priv: max98090 information
|
|
* @freq: Sampling frequency in Hz
|
|
*
|
|
* @return -EIO for error, 0 for success.
|
|
*/
|
|
int max98090_set_sysclk(struct maxim_priv *priv, unsigned int freq)
|
|
{
|
|
int error = 0;
|
|
|
|
/* Requested clock frequency is already setup */
|
|
if (freq == priv->sysclk)
|
|
return 0;
|
|
|
|
/* Setup clocks for slave mode, and using the PLL
|
|
* PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
|
|
* 0x02 (when master clk is 20MHz to 40MHz)..
|
|
* 0x03 (when master clk is 40MHz to 60MHz)..
|
|
*/
|
|
if (freq >= 10000000 && freq < 20000000) {
|
|
error = maxim_i2c_write(priv, M98090_REG_SYSTEM_CLOCK,
|
|
M98090_PSCLK_DIV1);
|
|
} else if (freq >= 20000000 && freq < 40000000) {
|
|
error = maxim_i2c_write(priv, M98090_REG_SYSTEM_CLOCK,
|
|
M98090_PSCLK_DIV2);
|
|
} else if (freq >= 40000000 && freq < 60000000) {
|
|
error = maxim_i2c_write(priv, M98090_REG_SYSTEM_CLOCK,
|
|
M98090_PSCLK_DIV4);
|
|
} else {
|
|
debug("%s: Invalid master clock frequency\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
debug("%s: Clock at %uHz\n", __func__, freq);
|
|
|
|
if (error < 0)
|
|
return -1;
|
|
|
|
priv->sysclk = freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Sets Max98090 I2S format
|
|
*
|
|
* @priv: max98090 information
|
|
* @fmt: i2S format - supports a subset of the options defined in i2s.h.
|
|
*
|
|
* @return -EIO for error, 0 for success.
|
|
*/
|
|
int max98090_set_fmt(struct maxim_priv *priv, int fmt)
|
|
{
|
|
u8 regval = 0;
|
|
int error = 0;
|
|
|
|
if (fmt == priv->fmt)
|
|
return 0;
|
|
|
|
priv->fmt = fmt;
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
/* Set to slave mode PLL - MAS mode off */
|
|
error |= maxim_i2c_write(priv, M98090_REG_CLOCK_RATIO_NI_MSB,
|
|
0x00);
|
|
error |= maxim_i2c_write(priv, M98090_REG_CLOCK_RATIO_NI_LSB,
|
|
0x00);
|
|
error |= maxim_bic_or(priv, M98090_REG_CLOCK_MODE,
|
|
M98090_USE_M1_MASK, 0);
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
/* Set to master mode */
|
|
debug("Master mode not supported\n");
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFM:
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
default:
|
|
debug("%s: Clock mode unsupported\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
error |= maxim_i2c_write(priv, M98090_REG_MASTER_MODE, regval);
|
|
|
|
regval = 0;
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
regval |= M98090_DLY_MASK;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
regval |= M98090_RJ_MASK;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
/* Not supported mode */
|
|
default:
|
|
debug("%s: Unrecognized format.\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
regval |= M98090_WCI_MASK;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
regval |= M98090_BCI_MASK;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
regval |= M98090_BCI_MASK | M98090_WCI_MASK;
|
|
break;
|
|
default:
|
|
debug("%s: Unrecognized inversion settings.\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
error |= maxim_i2c_write(priv, M98090_REG_INTERFACE_FORMAT, regval);
|
|
|
|
if (error < 0) {
|
|
debug("%s: Error setting i2s format.\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* resets the audio codec
|
|
*
|
|
* @priv: max98090 information
|
|
* @return -EIO for error, 0 for success.
|
|
*/
|
|
static int max98090_reset(struct maxim_priv *priv)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* Gracefully reset the DSP core and the codec hardware in a proper
|
|
* sequence.
|
|
*/
|
|
ret = maxim_i2c_write(priv, M98090_REG_SOFTWARE_RESET,
|
|
M98090_SWRESET_MASK);
|
|
if (ret != 0) {
|
|
debug("%s: Failed to reset DSP: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
mdelay(20);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initialise max98090 codec device
|
|
*
|
|
* @priv: max98090 information
|
|
*
|
|
* @return -EIO for error, 0 for success.
|
|
*/
|
|
int max98090_device_init(struct maxim_priv *priv)
|
|
{
|
|
unsigned char id;
|
|
int error = 0;
|
|
|
|
/* reset the codec, the DSP core, and disable all interrupts */
|
|
error = max98090_reset(priv);
|
|
if (error != 0) {
|
|
debug("Reset\n");
|
|
return error;
|
|
}
|
|
|
|
/* initialize private data */
|
|
priv->sysclk = -1U;
|
|
priv->rate = -1U;
|
|
priv->fmt = -1U;
|
|
|
|
error = maxim_i2c_read(priv, M98090_REG_REVISION_ID, &id);
|
|
if (error < 0) {
|
|
debug("%s: Failure reading hardware revision: %d\n",
|
|
__func__, id);
|
|
return -EIO;
|
|
}
|
|
debug("%s: Hardware revision: %d\n", __func__, id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max98090_setup_interface(struct maxim_priv *priv)
|
|
{
|
|
unsigned char id;
|
|
int error;
|
|
|
|
/* Reading interrupt status to clear them */
|
|
error = maxim_i2c_read(priv, M98090_REG_DEVICE_STATUS, &id);
|
|
|
|
error |= maxim_i2c_write(priv, M98090_REG_DAC_CONTROL,
|
|
M98090_DACHP_MASK);
|
|
error |= maxim_i2c_write(priv, M98090_REG_BIAS_CONTROL,
|
|
M98090_VCM_MODE_MASK);
|
|
|
|
error |= maxim_i2c_write(priv, M98090_REG_LEFT_SPK_MIXER, 0x1);
|
|
error |= maxim_i2c_write(priv, M98090_REG_RIGHT_SPK_MIXER, 0x2);
|
|
|
|
error |= maxim_i2c_write(priv, M98090_REG_LEFT_SPK_VOLUME, 0x25);
|
|
error |= maxim_i2c_write(priv, M98090_REG_RIGHT_SPK_VOLUME, 0x25);
|
|
|
|
error |= maxim_i2c_write(priv, M98090_REG_CLOCK_RATIO_NI_MSB, 0x0);
|
|
error |= maxim_i2c_write(priv, M98090_REG_CLOCK_RATIO_NI_LSB, 0x0);
|
|
error |= maxim_i2c_write(priv, M98090_REG_MASTER_MODE, 0x0);
|
|
error |= maxim_i2c_write(priv, M98090_REG_INTERFACE_FORMAT, 0x0);
|
|
error |= maxim_i2c_write(priv, M98090_REG_IO_CONFIGURATION,
|
|
M98090_SDIEN_MASK);
|
|
error |= maxim_i2c_write(priv, M98090_REG_DEVICE_SHUTDOWN,
|
|
M98090_SHDNN_MASK);
|
|
error |= maxim_i2c_write(priv, M98090_REG_OUTPUT_ENABLE,
|
|
M98090_HPREN_MASK | M98090_HPLEN_MASK |
|
|
M98090_SPREN_MASK | M98090_SPLEN_MASK |
|
|
M98090_DAREN_MASK | M98090_DALEN_MASK);
|
|
error |= maxim_i2c_write(priv, M98090_REG_IO_CONFIGURATION,
|
|
M98090_SDOEN_MASK | M98090_SDIEN_MASK);
|
|
|
|
if (error < 0)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max98090_do_init(struct maxim_priv *priv, int sampling_rate,
|
|
int mclk_freq, int bits_per_sample)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = max98090_setup_interface(priv);
|
|
if (ret < 0) {
|
|
debug("%s: max98090 setup interface failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = max98090_set_sysclk(priv, mclk_freq);
|
|
if (ret < 0) {
|
|
debug("%s: max98090 codec set sys clock failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = max98090_hw_params(priv, sampling_rate, bits_per_sample);
|
|
|
|
if (ret == 0) {
|
|
ret = max98090_set_fmt(priv, SND_SOC_DAIFMT_I2S |
|
|
SND_SOC_DAIFMT_NB_NF |
|
|
SND_SOC_DAIFMT_CBS_CFS);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int max98090_set_params(struct udevice *dev, int interface, int rate,
|
|
int mclk_freq, int bits_per_sample,
|
|
uint channels)
|
|
{
|
|
struct maxim_priv *priv = dev_get_priv(dev);
|
|
|
|
return max98090_do_init(priv, rate, mclk_freq, bits_per_sample);
|
|
}
|
|
|
|
static int max98090_probe(struct udevice *dev)
|
|
{
|
|
struct maxim_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
priv->dev = dev;
|
|
ret = max98090_device_init(priv);
|
|
if (ret < 0) {
|
|
debug("%s: max98090 codec chip init failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct audio_codec_ops max98090_ops = {
|
|
.set_params = max98090_set_params,
|
|
};
|
|
|
|
static const struct udevice_id max98090_ids[] = {
|
|
{ .compatible = "maxim,max98090" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(max98090) = {
|
|
.name = "max98090",
|
|
.id = UCLASS_AUDIO_CODEC,
|
|
.of_match = max98090_ids,
|
|
.probe = max98090_probe,
|
|
.ops = &max98090_ops,
|
|
.priv_auto_alloc_size = sizeof(struct maxim_priv),
|
|
};
|