u-boot/tools/gdb/gdbsend.c
wdenk 6dd652fa4d Patches by Murray Jensen, 17 Jun 2003:
- Hymod board database mods: add "who" field and new xilinx chip types
- provide new "init_cmd_timeout()" function so code external to
  "common/main.c" can use the "reset_cmd_timeout()" function before
  entering the main loop
- add DTT support for adm1021 (new file dtt/adm1021.c; config
  slightly different. see include/configs/hymod.h for an example
  (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
  CFG_DTT_ADM1021 defined)
- add new "eeprom_probe()" function which has similar args and
  behaves in a similar way to "eeprom_read()" etc.
- add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
  function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
- gdbtools copyright update
- ensure that set_msr() executes the "sync" and "isync" instructions
  after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
- 8260 I/O ports fix: Open Drain should be set last when configuring
- add SIU IRQ defines for 8260
- allow LDSCRIPT override and OBJCFLAGS initialization: change to
  config.mk to allow board configurations to override the GNU
  linker script, selected via the LDSCRIPT, make variable, and to
  give an initial value to the OBJCFLAGS make variable
- 8260 i2c enhancement:
  o correctly extends the timeout depending on the size of all
    queued messages for both transmit and receive
  o will not continue with receive if transmit times out
  o ensures that the error callback is done for all queued tx
    and rx messages
  o correctly detects both tx and rx timeouts, only delivers one to
    the callback, and does not overwrite an earlier error
  o logic in i2c_probe now correct
- add "vprintf()" function so that "panic()" function can be
  technically correct
- many Hymod board changes
2003-06-19 23:40:20 +00:00

137 lines
3.1 KiB
C

/*
* (C) Copyright 2000
* Murray Jensen <Murray.Jensen@csiro.au>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include "serial.h"
#include "error.h"
#include "remote.h"
char *serialdev = "/dev/term/b";
speed_t speed = B230400;
int verbose = 0, docont = 0;
unsigned long addr = 0x10000UL;
int
main(int ac, char **av)
{
int c, sfd, ifd;
char *ifn, *image;
struct stat ist;
if ((pname = strrchr(av[0], '/')) == NULL)
pname = av[0];
else
pname++;
while ((c = getopt(ac, av, "a:b:cp:v")) != EOF)
switch (c) {
case 'a': {
char *ep;
addr = strtol(optarg, &ep, 0);
if (ep == optarg || *ep != '\0')
Error("can't decode address specified in -a option");
break;
}
case 'b':
if ((speed = cvtspeed(optarg)) == B0)
Error("can't decode baud rate specified in -b option");
break;
case 'c':
docont = 1;
break;
case 'p':
serialdev = optarg;
break;
case 'v':
verbose = 1;
break;
default:
usage:
fprintf(stderr,
"Usage: %s [-a addr] [-b bps] [-c] [-p dev] [-v] imagefile\n",
pname);
exit(1);
}
if (optind != ac - 1)
goto usage;
ifn = av[optind++];
if (verbose)
fprintf(stderr, "Opening file and reading image...\n");
if ((ifd = open(ifn, O_RDONLY)) < 0)
Perror("can't open kernel image file '%s'", ifn);
if (fstat(ifd, &ist) < 0)
Perror("fstat '%s' failed", ifn);
if ((image = (char *)malloc(ist.st_size)) == NULL)
Perror("can't allocate %ld bytes for image", ist.st_size);
if ((c = read(ifd, image, ist.st_size)) < 0)
Perror("read of %d bytes from '%s' failed", ist.st_size, ifn);
if (c != ist.st_size)
Error("read of %ld bytes from '%s' failed (%d)", ist.st_size, ifn, c);
if (close(ifd) < 0)
Perror("close of '%s' failed", ifn);
if (verbose)
fprintf(stderr, "Opening serial port and sending image...\n");
if ((sfd = serialopen(serialdev, speed)) < 0)
Perror("open of serial device '%s' failed", serialdev);
remote_desc = sfd;
remote_reset();
remote_write_bytes(addr, image, ist.st_size);
if (docont) {
if (verbose)
fprintf(stderr, "[continue]");
remote_continue();
}
if (serialclose(sfd) < 0)
Perror("close of serial device '%s' failed", serialdev);
if (verbose)
fprintf(stderr, "Done.\n");
return (0);
}