mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
a27290a6f8
RK3188 using the same ddr_conf for both 15 bit and 16 bit row address. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [Fixed compile-error by declaring 'row':] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
960 lines
25 KiB
C
960 lines
25 KiB
C
/*
|
|
* (C) Copyright 2015 Google, Inc
|
|
* Copyright 2014 Rockchip Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
*
|
|
* Adapted from the very similar rk3288 ddr init.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <dt-structs.h>
|
|
#include <errno.h>
|
|
#include <ram.h>
|
|
#include <regmap.h>
|
|
#include <syscon.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/cru_rk3188.h>
|
|
#include <asm/arch/ddr_rk3188.h>
|
|
#include <asm/arch/grf_rk3188.h>
|
|
#include <asm/arch/pmu_rk3188.h>
|
|
#include <asm/arch/sdram.h>
|
|
#include <asm/arch/sdram_common.h>
|
|
#include <linux/err.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct chan_info {
|
|
struct rk3288_ddr_pctl *pctl;
|
|
struct rk3288_ddr_publ *publ;
|
|
struct rk3188_msch *msch;
|
|
};
|
|
|
|
struct dram_info {
|
|
struct chan_info chan[1];
|
|
struct ram_info info;
|
|
struct clk ddr_clk;
|
|
struct rk3188_cru *cru;
|
|
struct rk3188_grf *grf;
|
|
struct rk3188_sgrf *sgrf;
|
|
struct rk3188_pmu *pmu;
|
|
};
|
|
|
|
struct rk3188_sdram_params {
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct dtd_rockchip_rk3188_dmc of_plat;
|
|
#endif
|
|
struct rk3288_sdram_channel ch[2];
|
|
struct rk3288_sdram_pctl_timing pctl_timing;
|
|
struct rk3288_sdram_phy_timing phy_timing;
|
|
struct rk3288_base_params base;
|
|
int num_channels;
|
|
struct regmap *map;
|
|
};
|
|
|
|
const int ddrconf_table[] = {
|
|
/*
|
|
* [5:4] row(13+n)
|
|
* [1:0] col(9+n), assume bw=2
|
|
* row col,bw
|
|
*/
|
|
0,
|
|
((2 << DDRCONF_ROW_SHIFT) | 1 << DDRCONF_COL_SHIFT),
|
|
((1 << DDRCONF_ROW_SHIFT) | 1 << DDRCONF_COL_SHIFT),
|
|
((0 << DDRCONF_ROW_SHIFT) | 1 << DDRCONF_COL_SHIFT),
|
|
((2 << DDRCONF_ROW_SHIFT) | 2 << DDRCONF_COL_SHIFT),
|
|
((1 << DDRCONF_ROW_SHIFT) | 2 << DDRCONF_COL_SHIFT),
|
|
((0 << DDRCONF_ROW_SHIFT) | 2 << DDRCONF_COL_SHIFT),
|
|
((1 << DDRCONF_ROW_SHIFT) | 0 << DDRCONF_COL_SHIFT),
|
|
((0 << DDRCONF_ROW_SHIFT) | 0 << DDRCONF_COL_SHIFT),
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
};
|
|
|
|
#define TEST_PATTEN 0x5aa5f00f
|
|
#define DQS_GATE_TRAINING_ERROR_RANK0 (1 << 4)
|
|
#define DQS_GATE_TRAINING_ERROR_RANK1 (2 << 4)
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
static void copy_to_reg(u32 *dest, const u32 *src, u32 n)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < n / sizeof(u32); i++) {
|
|
writel(*src, dest);
|
|
src++;
|
|
dest++;
|
|
}
|
|
}
|
|
|
|
static void ddr_reset(struct rk3188_cru *cru, u32 ch, u32 ctl, u32 phy)
|
|
{
|
|
u32 phy_ctl_srstn_shift = 13;
|
|
u32 ctl_psrstn_shift = 11;
|
|
u32 ctl_srstn_shift = 10;
|
|
u32 phy_psrstn_shift = 9;
|
|
u32 phy_srstn_shift = 8;
|
|
|
|
rk_clrsetreg(&cru->cru_softrst_con[5],
|
|
1 << phy_ctl_srstn_shift | 1 << ctl_psrstn_shift |
|
|
1 << ctl_srstn_shift | 1 << phy_psrstn_shift |
|
|
1 << phy_srstn_shift,
|
|
phy << phy_ctl_srstn_shift | ctl << ctl_psrstn_shift |
|
|
ctl << ctl_srstn_shift | phy << phy_psrstn_shift |
|
|
phy << phy_srstn_shift);
|
|
}
|
|
|
|
static void ddr_phy_ctl_reset(struct rk3188_cru *cru, u32 ch, u32 n)
|
|
{
|
|
u32 phy_ctl_srstn_shift = 13;
|
|
|
|
rk_clrsetreg(&cru->cru_softrst_con[5],
|
|
1 << phy_ctl_srstn_shift, n << phy_ctl_srstn_shift);
|
|
}
|
|
|
|
static void phy_pctrl_reset(struct rk3188_cru *cru,
|
|
struct rk3288_ddr_publ *publ,
|
|
int channel)
|
|
{
|
|
int i;
|
|
|
|
ddr_reset(cru, channel, 1, 1);
|
|
udelay(1);
|
|
clrbits_le32(&publ->acdllcr, ACDLLCR_DLLSRST);
|
|
for (i = 0; i < 4; i++)
|
|
clrbits_le32(&publ->datx8[i].dxdllcr, DXDLLCR_DLLSRST);
|
|
|
|
udelay(10);
|
|
setbits_le32(&publ->acdllcr, ACDLLCR_DLLSRST);
|
|
for (i = 0; i < 4; i++)
|
|
setbits_le32(&publ->datx8[i].dxdllcr, DXDLLCR_DLLSRST);
|
|
|
|
udelay(10);
|
|
ddr_reset(cru, channel, 1, 0);
|
|
udelay(10);
|
|
ddr_reset(cru, channel, 0, 0);
|
|
udelay(10);
|
|
}
|
|
|
|
static void phy_dll_bypass_set(struct rk3288_ddr_publ *publ,
|
|
u32 freq)
|
|
{
|
|
int i;
|
|
|
|
if (freq <= 250000000) {
|
|
if (freq <= 150000000)
|
|
clrbits_le32(&publ->dllgcr, SBIAS_BYPASS);
|
|
else
|
|
setbits_le32(&publ->dllgcr, SBIAS_BYPASS);
|
|
setbits_le32(&publ->acdllcr, ACDLLCR_DLLDIS);
|
|
for (i = 0; i < 4; i++)
|
|
setbits_le32(&publ->datx8[i].dxdllcr,
|
|
DXDLLCR_DLLDIS);
|
|
|
|
setbits_le32(&publ->pir, PIR_DLLBYP);
|
|
} else {
|
|
clrbits_le32(&publ->dllgcr, SBIAS_BYPASS);
|
|
clrbits_le32(&publ->acdllcr, ACDLLCR_DLLDIS);
|
|
for (i = 0; i < 4; i++) {
|
|
clrbits_le32(&publ->datx8[i].dxdllcr,
|
|
DXDLLCR_DLLDIS);
|
|
}
|
|
|
|
clrbits_le32(&publ->pir, PIR_DLLBYP);
|
|
}
|
|
}
|
|
|
|
static void dfi_cfg(struct rk3288_ddr_pctl *pctl, u32 dramtype)
|
|
{
|
|
writel(DFI_INIT_START, &pctl->dfistcfg0);
|
|
writel(DFI_DRAM_CLK_SR_EN | DFI_DRAM_CLK_DPD_EN,
|
|
&pctl->dfistcfg1);
|
|
writel(DFI_PARITY_INTR_EN | DFI_PARITY_EN, &pctl->dfistcfg2);
|
|
writel(7 << TLP_RESP_TIME_SHIFT | LP_SR_EN | LP_PD_EN,
|
|
&pctl->dfilpcfg0);
|
|
|
|
writel(2 << TCTRL_DELAY_TIME_SHIFT, &pctl->dfitctrldelay);
|
|
writel(1 << TPHY_WRDATA_TIME_SHIFT, &pctl->dfitphywrdata);
|
|
writel(0xf << TPHY_RDLAT_TIME_SHIFT, &pctl->dfitphyrdlat);
|
|
writel(2 << TDRAM_CLK_DIS_TIME_SHIFT, &pctl->dfitdramclkdis);
|
|
writel(2 << TDRAM_CLK_EN_TIME_SHIFT, &pctl->dfitdramclken);
|
|
writel(1, &pctl->dfitphyupdtype0);
|
|
|
|
/* cs0 and cs1 write odt enable */
|
|
writel((RANK0_ODT_WRITE_SEL | RANK1_ODT_WRITE_SEL),
|
|
&pctl->dfiodtcfg);
|
|
/* odt write length */
|
|
writel(7 << ODT_LEN_BL8_W_SHIFT, &pctl->dfiodtcfg1);
|
|
/* phyupd and ctrlupd disabled */
|
|
writel(0, &pctl->dfiupdcfg);
|
|
}
|
|
|
|
static void ddr_set_enable(struct rk3188_grf *grf, uint channel, bool enable)
|
|
{
|
|
uint val = 0;
|
|
|
|
if (enable)
|
|
val = 1 << DDR_16BIT_EN_SHIFT;
|
|
|
|
rk_clrsetreg(&grf->ddrc_con0, 1 << DDR_16BIT_EN_SHIFT, val);
|
|
}
|
|
|
|
static void ddr_set_ddr3_mode(struct rk3188_grf *grf, uint channel,
|
|
bool ddr3_mode)
|
|
{
|
|
uint mask, val;
|
|
|
|
mask = MSCH4_MAINDDR3_MASK << MSCH4_MAINDDR3_SHIFT;
|
|
val = ddr3_mode << MSCH4_MAINDDR3_SHIFT;
|
|
rk_clrsetreg(&grf->soc_con2, mask, val);
|
|
}
|
|
|
|
static void ddr_rank_2_row15en(struct rk3188_grf *grf, bool enable)
|
|
{
|
|
uint mask, val;
|
|
|
|
mask = RANK_TO_ROW15_EN_MASK << RANK_TO_ROW15_EN_SHIFT;
|
|
val = enable << RANK_TO_ROW15_EN_SHIFT;
|
|
rk_clrsetreg(&grf->soc_con2, mask, val);
|
|
}
|
|
|
|
static void pctl_cfg(int channel, struct rk3288_ddr_pctl *pctl,
|
|
struct rk3188_sdram_params *sdram_params,
|
|
struct rk3188_grf *grf)
|
|
{
|
|
copy_to_reg(&pctl->togcnt1u, &sdram_params->pctl_timing.togcnt1u,
|
|
sizeof(sdram_params->pctl_timing));
|
|
switch (sdram_params->base.dramtype) {
|
|
case DDR3:
|
|
if (sdram_params->phy_timing.mr[1] & DDR3_DLL_DISABLE) {
|
|
writel(sdram_params->pctl_timing.tcl - 3,
|
|
&pctl->dfitrddataen);
|
|
} else {
|
|
writel(sdram_params->pctl_timing.tcl - 2,
|
|
&pctl->dfitrddataen);
|
|
}
|
|
writel(sdram_params->pctl_timing.tcwl - 1,
|
|
&pctl->dfitphywrlat);
|
|
writel(0 << MDDR_LPDDR2_CLK_STOP_IDLE_SHIFT | DDR3_EN |
|
|
DDR2_DDR3_BL_8 | (6 - 4) << TFAW_SHIFT | PD_EXIT_SLOW |
|
|
1 << PD_TYPE_SHIFT | 0 << PD_IDLE_SHIFT,
|
|
&pctl->mcfg);
|
|
ddr_set_ddr3_mode(grf, channel, true);
|
|
ddr_set_enable(grf, channel, true);
|
|
break;
|
|
}
|
|
|
|
setbits_le32(&pctl->scfg, 1);
|
|
}
|
|
|
|
static void phy_cfg(const struct chan_info *chan, int channel,
|
|
struct rk3188_sdram_params *sdram_params)
|
|
{
|
|
struct rk3288_ddr_publ *publ = chan->publ;
|
|
struct rk3188_msch *msch = chan->msch;
|
|
uint ddr_freq_mhz = sdram_params->base.ddr_freq / 1000000;
|
|
u32 dinit2;
|
|
int i;
|
|
|
|
dinit2 = DIV_ROUND_UP(ddr_freq_mhz * 200000, 1000);
|
|
/* DDR PHY Timing */
|
|
copy_to_reg(&publ->dtpr[0], &sdram_params->phy_timing.dtpr0,
|
|
sizeof(sdram_params->phy_timing));
|
|
writel(sdram_params->base.noc_timing, &msch->ddrtiming);
|
|
writel(0x3f, &msch->readlatency);
|
|
writel(DIV_ROUND_UP(ddr_freq_mhz * 5120, 1000) << PRT_DLLLOCK_SHIFT |
|
|
DIV_ROUND_UP(ddr_freq_mhz * 50, 1000) << PRT_DLLSRST_SHIFT |
|
|
8 << PRT_ITMSRST_SHIFT, &publ->ptr[0]);
|
|
writel(DIV_ROUND_UP(ddr_freq_mhz * 500000, 1000) << PRT_DINIT0_SHIFT |
|
|
DIV_ROUND_UP(ddr_freq_mhz * 400, 1000) << PRT_DINIT1_SHIFT,
|
|
&publ->ptr[1]);
|
|
writel(min(dinit2, 0x1ffffU) << PRT_DINIT2_SHIFT |
|
|
DIV_ROUND_UP(ddr_freq_mhz * 1000, 1000) << PRT_DINIT3_SHIFT,
|
|
&publ->ptr[2]);
|
|
|
|
switch (sdram_params->base.dramtype) {
|
|
case DDR3:
|
|
clrbits_le32(&publ->pgcr, 0x1f);
|
|
clrsetbits_le32(&publ->dcr, DDRMD_MASK << DDRMD_SHIFT,
|
|
DDRMD_DDR3 << DDRMD_SHIFT);
|
|
break;
|
|
}
|
|
if (sdram_params->base.odt) {
|
|
/*dynamic RTT enable */
|
|
for (i = 0; i < 4; i++)
|
|
setbits_le32(&publ->datx8[i].dxgcr, DQSRTT | DQRTT);
|
|
} else {
|
|
/*dynamic RTT disable */
|
|
for (i = 0; i < 4; i++)
|
|
clrbits_le32(&publ->datx8[i].dxgcr, DQSRTT | DQRTT);
|
|
}
|
|
}
|
|
|
|
static void phy_init(struct rk3288_ddr_publ *publ)
|
|
{
|
|
setbits_le32(&publ->pir, PIR_INIT | PIR_DLLSRST
|
|
| PIR_DLLLOCK | PIR_ZCAL | PIR_ITMSRST | PIR_CLRSR);
|
|
udelay(1);
|
|
while ((readl(&publ->pgsr) &
|
|
(PGSR_IDONE | PGSR_DLDONE | PGSR_ZCDONE)) !=
|
|
(PGSR_IDONE | PGSR_DLDONE | PGSR_ZCDONE))
|
|
;
|
|
}
|
|
|
|
static void send_command(struct rk3288_ddr_pctl *pctl, u32 rank,
|
|
u32 cmd, u32 arg)
|
|
{
|
|
writel((START_CMD | (rank << 20) | arg | cmd), &pctl->mcmd);
|
|
udelay(1);
|
|
while (readl(&pctl->mcmd) & START_CMD)
|
|
;
|
|
}
|
|
|
|
static inline void send_command_op(struct rk3288_ddr_pctl *pctl,
|
|
u32 rank, u32 cmd, u32 ma, u32 op)
|
|
{
|
|
send_command(pctl, rank, cmd, (ma & LPDDR2_MA_MASK) << LPDDR2_MA_SHIFT |
|
|
(op & LPDDR2_OP_MASK) << LPDDR2_OP_SHIFT);
|
|
}
|
|
|
|
static void memory_init(struct rk3288_ddr_publ *publ,
|
|
u32 dramtype)
|
|
{
|
|
setbits_le32(&publ->pir,
|
|
(PIR_INIT | PIR_DRAMINIT | PIR_LOCKBYP
|
|
| PIR_ZCALBYP | PIR_CLRSR | PIR_ICPC
|
|
| (dramtype == DDR3 ? PIR_DRAMRST : 0)));
|
|
udelay(1);
|
|
while ((readl(&publ->pgsr) & (PGSR_IDONE | PGSR_DLDONE))
|
|
!= (PGSR_IDONE | PGSR_DLDONE))
|
|
;
|
|
}
|
|
|
|
static void move_to_config_state(struct rk3288_ddr_publ *publ,
|
|
struct rk3288_ddr_pctl *pctl)
|
|
{
|
|
unsigned int state;
|
|
|
|
while (1) {
|
|
state = readl(&pctl->stat) & PCTL_STAT_MSK;
|
|
|
|
switch (state) {
|
|
case LOW_POWER:
|
|
writel(WAKEUP_STATE, &pctl->sctl);
|
|
while ((readl(&pctl->stat) & PCTL_STAT_MSK)
|
|
!= ACCESS)
|
|
;
|
|
/* wait DLL lock */
|
|
while ((readl(&publ->pgsr) & PGSR_DLDONE)
|
|
!= PGSR_DLDONE)
|
|
;
|
|
/*
|
|
* if at low power state,need wakeup first,
|
|
* and then enter the config, so
|
|
* fallthrough
|
|
*/
|
|
case ACCESS:
|
|
/* fallthrough */
|
|
case INIT_MEM:
|
|
writel(CFG_STATE, &pctl->sctl);
|
|
while ((readl(&pctl->stat) & PCTL_STAT_MSK) != CONFIG)
|
|
;
|
|
break;
|
|
case CONFIG:
|
|
return;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void set_bandwidth_ratio(const struct chan_info *chan, int channel,
|
|
u32 n, struct rk3188_grf *grf)
|
|
{
|
|
struct rk3288_ddr_pctl *pctl = chan->pctl;
|
|
struct rk3288_ddr_publ *publ = chan->publ;
|
|
struct rk3188_msch *msch = chan->msch;
|
|
|
|
if (n == 1) {
|
|
setbits_le32(&pctl->ppcfg, 1);
|
|
ddr_set_enable(grf, channel, 1);
|
|
setbits_le32(&msch->ddrtiming, 1 << 31);
|
|
/* Data Byte disable*/
|
|
clrbits_le32(&publ->datx8[2].dxgcr, 1);
|
|
clrbits_le32(&publ->datx8[3].dxgcr, 1);
|
|
/* disable DLL */
|
|
setbits_le32(&publ->datx8[2].dxdllcr, DXDLLCR_DLLDIS);
|
|
setbits_le32(&publ->datx8[3].dxdllcr, DXDLLCR_DLLDIS);
|
|
} else {
|
|
clrbits_le32(&pctl->ppcfg, 1);
|
|
ddr_set_enable(grf, channel, 0);
|
|
clrbits_le32(&msch->ddrtiming, 1 << 31);
|
|
/* Data Byte enable*/
|
|
setbits_le32(&publ->datx8[2].dxgcr, 1);
|
|
setbits_le32(&publ->datx8[3].dxgcr, 1);
|
|
|
|
/* enable DLL */
|
|
clrbits_le32(&publ->datx8[2].dxdllcr, DXDLLCR_DLLDIS);
|
|
clrbits_le32(&publ->datx8[3].dxdllcr, DXDLLCR_DLLDIS);
|
|
/* reset DLL */
|
|
clrbits_le32(&publ->datx8[2].dxdllcr, DXDLLCR_DLLSRST);
|
|
clrbits_le32(&publ->datx8[3].dxdllcr, DXDLLCR_DLLSRST);
|
|
udelay(10);
|
|
setbits_le32(&publ->datx8[2].dxdllcr, DXDLLCR_DLLSRST);
|
|
setbits_le32(&publ->datx8[3].dxdllcr, DXDLLCR_DLLSRST);
|
|
}
|
|
setbits_le32(&pctl->dfistcfg0, 1 << 2);
|
|
}
|
|
|
|
static int data_training(const struct chan_info *chan, int channel,
|
|
struct rk3188_sdram_params *sdram_params)
|
|
{
|
|
unsigned int j;
|
|
int ret = 0;
|
|
u32 rank;
|
|
int i;
|
|
u32 step[2] = { PIR_QSTRN, PIR_RVTRN };
|
|
struct rk3288_ddr_publ *publ = chan->publ;
|
|
struct rk3288_ddr_pctl *pctl = chan->pctl;
|
|
|
|
/* disable auto refresh */
|
|
writel(0, &pctl->trefi);
|
|
|
|
if (sdram_params->base.dramtype != LPDDR3)
|
|
setbits_le32(&publ->pgcr, 1 << PGCR_DQSCFG_SHIFT);
|
|
rank = sdram_params->ch[channel].rank | 1;
|
|
for (j = 0; j < ARRAY_SIZE(step); j++) {
|
|
/*
|
|
* trigger QSTRN and RVTRN
|
|
* clear DTDONE status
|
|
*/
|
|
setbits_le32(&publ->pir, PIR_CLRSR);
|
|
|
|
/* trigger DTT */
|
|
setbits_le32(&publ->pir,
|
|
PIR_INIT | step[j] | PIR_LOCKBYP | PIR_ZCALBYP |
|
|
PIR_CLRSR);
|
|
udelay(1);
|
|
/* wait echo byte DTDONE */
|
|
while ((readl(&publ->datx8[0].dxgsr[0]) & rank)
|
|
!= rank)
|
|
;
|
|
while ((readl(&publ->datx8[1].dxgsr[0]) & rank)
|
|
!= rank)
|
|
;
|
|
if (!(readl(&pctl->ppcfg) & 1)) {
|
|
while ((readl(&publ->datx8[2].dxgsr[0])
|
|
& rank) != rank)
|
|
;
|
|
while ((readl(&publ->datx8[3].dxgsr[0])
|
|
& rank) != rank)
|
|
;
|
|
}
|
|
if (readl(&publ->pgsr) &
|
|
(PGSR_DTERR | PGSR_RVERR | PGSR_RVEIRR)) {
|
|
ret = -1;
|
|
break;
|
|
}
|
|
}
|
|
/* send some auto refresh to complement the lost while DTT */
|
|
for (i = 0; i < (rank > 1 ? 8 : 4); i++)
|
|
send_command(pctl, rank, REF_CMD, 0);
|
|
|
|
if (sdram_params->base.dramtype != LPDDR3)
|
|
clrbits_le32(&publ->pgcr, 1 << PGCR_DQSCFG_SHIFT);
|
|
|
|
/* resume auto refresh */
|
|
writel(sdram_params->pctl_timing.trefi, &pctl->trefi);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void move_to_access_state(const struct chan_info *chan)
|
|
{
|
|
struct rk3288_ddr_publ *publ = chan->publ;
|
|
struct rk3288_ddr_pctl *pctl = chan->pctl;
|
|
unsigned int state;
|
|
|
|
while (1) {
|
|
state = readl(&pctl->stat) & PCTL_STAT_MSK;
|
|
|
|
switch (state) {
|
|
case LOW_POWER:
|
|
if (((readl(&pctl->stat) >> LP_TRIG_SHIFT) &
|
|
LP_TRIG_MASK) == 1)
|
|
return;
|
|
|
|
writel(WAKEUP_STATE, &pctl->sctl);
|
|
while ((readl(&pctl->stat) & PCTL_STAT_MSK) != ACCESS)
|
|
;
|
|
/* wait DLL lock */
|
|
while ((readl(&publ->pgsr) & PGSR_DLDONE)
|
|
!= PGSR_DLDONE)
|
|
;
|
|
break;
|
|
case INIT_MEM:
|
|
writel(CFG_STATE, &pctl->sctl);
|
|
while ((readl(&pctl->stat) & PCTL_STAT_MSK) != CONFIG)
|
|
;
|
|
/* fallthrough */
|
|
case CONFIG:
|
|
writel(GO_STATE, &pctl->sctl);
|
|
while ((readl(&pctl->stat) & PCTL_STAT_MSK) == CONFIG)
|
|
;
|
|
break;
|
|
case ACCESS:
|
|
return;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void dram_cfg_rbc(const struct chan_info *chan, u32 chnum,
|
|
struct rk3188_sdram_params *sdram_params)
|
|
{
|
|
struct rk3288_ddr_publ *publ = chan->publ;
|
|
|
|
if (sdram_params->ch[chnum].bk == 3)
|
|
clrsetbits_le32(&publ->dcr, PDQ_MASK << PDQ_SHIFT,
|
|
1 << PDQ_SHIFT);
|
|
else
|
|
clrbits_le32(&publ->dcr, PDQ_MASK << PDQ_SHIFT);
|
|
|
|
writel(sdram_params->base.ddrconfig, &chan->msch->ddrconf);
|
|
}
|
|
|
|
static void dram_all_config(const struct dram_info *dram,
|
|
struct rk3188_sdram_params *sdram_params)
|
|
{
|
|
unsigned int chan;
|
|
u32 sys_reg = 0;
|
|
|
|
sys_reg |= sdram_params->base.dramtype << SYS_REG_DDRTYPE_SHIFT;
|
|
sys_reg |= (sdram_params->num_channels - 1) << SYS_REG_NUM_CH_SHIFT;
|
|
for (chan = 0; chan < sdram_params->num_channels; chan++) {
|
|
const struct rk3288_sdram_channel *info =
|
|
&sdram_params->ch[chan];
|
|
|
|
sys_reg |= info->row_3_4 << SYS_REG_ROW_3_4_SHIFT(chan);
|
|
sys_reg |= 1 << SYS_REG_CHINFO_SHIFT(chan);
|
|
sys_reg |= (info->rank - 1) << SYS_REG_RANK_SHIFT(chan);
|
|
sys_reg |= (info->col - 9) << SYS_REG_COL_SHIFT(chan);
|
|
sys_reg |= info->bk == 3 ? 0 : 1 << SYS_REG_BK_SHIFT(chan);
|
|
sys_reg |= (info->cs0_row - 13) << SYS_REG_CS0_ROW_SHIFT(chan);
|
|
sys_reg |= (info->cs1_row - 13) << SYS_REG_CS1_ROW_SHIFT(chan);
|
|
sys_reg |= (2 >> info->bw) << SYS_REG_BW_SHIFT(chan);
|
|
sys_reg |= (2 >> info->dbw) << SYS_REG_DBW_SHIFT(chan);
|
|
|
|
dram_cfg_rbc(&dram->chan[chan], chan, sdram_params);
|
|
}
|
|
if (sdram_params->ch[0].rank == 2)
|
|
ddr_rank_2_row15en(dram->grf, 0);
|
|
else
|
|
ddr_rank_2_row15en(dram->grf, 1);
|
|
|
|
writel(sys_reg, &dram->pmu->sys_reg[2]);
|
|
}
|
|
|
|
static int sdram_rank_bw_detect(struct dram_info *dram, int channel,
|
|
struct rk3188_sdram_params *sdram_params)
|
|
{
|
|
int reg;
|
|
int need_trainig = 0;
|
|
const struct chan_info *chan = &dram->chan[channel];
|
|
struct rk3288_ddr_publ *publ = chan->publ;
|
|
|
|
ddr_rank_2_row15en(dram->grf, 0);
|
|
|
|
if (data_training(chan, channel, sdram_params) < 0) {
|
|
printf("first data training fail!\n");
|
|
reg = readl(&publ->datx8[0].dxgsr[0]);
|
|
/* Check the result for rank 0 */
|
|
if ((channel == 0) && (reg & DQS_GATE_TRAINING_ERROR_RANK0)) {
|
|
printf("data training fail!\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* Check the result for rank 1 */
|
|
if (reg & DQS_GATE_TRAINING_ERROR_RANK1) {
|
|
sdram_params->ch[channel].rank = 1;
|
|
clrsetbits_le32(&publ->pgcr, 0xF << 18,
|
|
sdram_params->ch[channel].rank << 18);
|
|
need_trainig = 1;
|
|
}
|
|
reg = readl(&publ->datx8[2].dxgsr[0]);
|
|
if (reg & (1 << 4)) {
|
|
sdram_params->ch[channel].bw = 1;
|
|
set_bandwidth_ratio(chan, channel,
|
|
sdram_params->ch[channel].bw,
|
|
dram->grf);
|
|
need_trainig = 1;
|
|
}
|
|
}
|
|
/* Assume the Die bit width are the same with the chip bit width */
|
|
sdram_params->ch[channel].dbw = sdram_params->ch[channel].bw;
|
|
|
|
if (need_trainig &&
|
|
(data_training(chan, channel, sdram_params) < 0)) {
|
|
if (sdram_params->base.dramtype == LPDDR3) {
|
|
ddr_phy_ctl_reset(dram->cru, channel, 1);
|
|
udelay(10);
|
|
ddr_phy_ctl_reset(dram->cru, channel, 0);
|
|
udelay(10);
|
|
}
|
|
printf("2nd data training failed!");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Detect ram columns and rows.
|
|
* @dram: dram info struct
|
|
* @channel: channel number to handle
|
|
* @sdram_params: sdram parameters, function will fill in col and row values
|
|
*
|
|
* Returns 0 or negative on error.
|
|
*/
|
|
static int sdram_col_row_detect(struct dram_info *dram, int channel,
|
|
struct rk3188_sdram_params *sdram_params)
|
|
{
|
|
int row, col;
|
|
unsigned int addr;
|
|
const struct chan_info *chan = &dram->chan[channel];
|
|
struct rk3288_ddr_pctl *pctl = chan->pctl;
|
|
struct rk3288_ddr_publ *publ = chan->publ;
|
|
int ret = 0;
|
|
|
|
/* Detect col */
|
|
for (col = 11; col >= 9; col--) {
|
|
writel(0, CONFIG_SYS_SDRAM_BASE);
|
|
addr = CONFIG_SYS_SDRAM_BASE +
|
|
(1 << (col + sdram_params->ch[channel].bw - 1));
|
|
writel(TEST_PATTEN, addr);
|
|
if ((readl(addr) == TEST_PATTEN) &&
|
|
(readl(CONFIG_SYS_SDRAM_BASE) == 0))
|
|
break;
|
|
}
|
|
if (col == 8) {
|
|
printf("Col detect error\n");
|
|
ret = -EINVAL;
|
|
goto out;
|
|
} else {
|
|
sdram_params->ch[channel].col = col;
|
|
}
|
|
|
|
ddr_rank_2_row15en(dram->grf, 1);
|
|
move_to_config_state(publ, pctl);
|
|
writel(1, &chan->msch->ddrconf);
|
|
move_to_access_state(chan);
|
|
/* Detect row, max 15,min13 in rk3188*/
|
|
for (row = 16; row >= 13; row--) {
|
|
writel(0, CONFIG_SYS_SDRAM_BASE);
|
|
addr = CONFIG_SYS_SDRAM_BASE + (1 << (row + 15 - 1));
|
|
writel(TEST_PATTEN, addr);
|
|
if ((readl(addr) == TEST_PATTEN) &&
|
|
(readl(CONFIG_SYS_SDRAM_BASE) == 0))
|
|
break;
|
|
}
|
|
if (row == 12) {
|
|
printf("Row detect error\n");
|
|
ret = -EINVAL;
|
|
} else {
|
|
sdram_params->ch[channel].cs1_row = row;
|
|
sdram_params->ch[channel].row_3_4 = 0;
|
|
debug("chn %d col %d, row %d\n", channel, col, row);
|
|
sdram_params->ch[channel].cs0_row = row;
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int sdram_get_niu_config(struct rk3188_sdram_params *sdram_params)
|
|
{
|
|
int i, tmp, size, row, ret = 0;
|
|
|
|
row = sdram_params->ch[0].cs0_row;
|
|
/*
|
|
* RK3188 share the rank and row bit15, we use same ddr config for 15bit
|
|
* and 16bit row
|
|
*/
|
|
if (row == 16)
|
|
row = 15;
|
|
tmp = sdram_params->ch[0].col - 9;
|
|
tmp -= (sdram_params->ch[0].bw == 2) ? 0 : 1;
|
|
tmp |= ((row - 13) << 4);
|
|
size = sizeof(ddrconf_table)/sizeof(ddrconf_table[0]);
|
|
for (i = 0; i < size; i++)
|
|
if (tmp == ddrconf_table[i])
|
|
break;
|
|
if (i >= size) {
|
|
printf("niu config not found\n");
|
|
ret = -EINVAL;
|
|
} else {
|
|
debug("niu config %d\n", i);
|
|
sdram_params->base.ddrconfig = i;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sdram_init(struct dram_info *dram,
|
|
struct rk3188_sdram_params *sdram_params)
|
|
{
|
|
int channel;
|
|
int zqcr;
|
|
int ret;
|
|
|
|
if ((sdram_params->base.dramtype == DDR3 &&
|
|
sdram_params->base.ddr_freq > 800000000)) {
|
|
printf("SDRAM frequency is too high!");
|
|
return -E2BIG;
|
|
}
|
|
|
|
ret = clk_set_rate(&dram->ddr_clk, sdram_params->base.ddr_freq);
|
|
if (ret) {
|
|
printf("Could not set DDR clock\n");
|
|
return ret;
|
|
}
|
|
|
|
for (channel = 0; channel < 1; channel++) {
|
|
const struct chan_info *chan = &dram->chan[channel];
|
|
struct rk3288_ddr_pctl *pctl = chan->pctl;
|
|
struct rk3288_ddr_publ *publ = chan->publ;
|
|
|
|
phy_pctrl_reset(dram->cru, publ, channel);
|
|
phy_dll_bypass_set(publ, sdram_params->base.ddr_freq);
|
|
|
|
dfi_cfg(pctl, sdram_params->base.dramtype);
|
|
|
|
pctl_cfg(channel, pctl, sdram_params, dram->grf);
|
|
|
|
phy_cfg(chan, channel, sdram_params);
|
|
|
|
phy_init(publ);
|
|
|
|
writel(POWER_UP_START, &pctl->powctl);
|
|
while (!(readl(&pctl->powstat) & POWER_UP_DONE))
|
|
;
|
|
|
|
memory_init(publ, sdram_params->base.dramtype);
|
|
move_to_config_state(publ, pctl);
|
|
|
|
/* Using 32bit bus width for detect */
|
|
sdram_params->ch[channel].bw = 2;
|
|
set_bandwidth_ratio(chan, channel,
|
|
sdram_params->ch[channel].bw, dram->grf);
|
|
/*
|
|
* set cs, using n=3 for detect
|
|
* CS0, n=1
|
|
* CS1, n=2
|
|
* CS0 & CS1, n = 3
|
|
*/
|
|
sdram_params->ch[channel].rank = 2,
|
|
clrsetbits_le32(&publ->pgcr, 0xF << 18,
|
|
(sdram_params->ch[channel].rank | 1) << 18);
|
|
|
|
/* DS=40ohm,ODT=155ohm */
|
|
zqcr = 1 << ZDEN_SHIFT | 2 << PU_ONDIE_SHIFT |
|
|
2 << PD_ONDIE_SHIFT | 0x19 << PU_OUTPUT_SHIFT |
|
|
0x19 << PD_OUTPUT_SHIFT;
|
|
writel(zqcr, &publ->zq1cr[0]);
|
|
writel(zqcr, &publ->zq0cr[0]);
|
|
|
|
/* Detect the rank and bit-width with data-training */
|
|
writel(1, &chan->msch->ddrconf);
|
|
sdram_rank_bw_detect(dram, channel, sdram_params);
|
|
|
|
if (sdram_params->base.dramtype == LPDDR3) {
|
|
u32 i;
|
|
writel(0, &pctl->mrrcfg0);
|
|
for (i = 0; i < 17; i++)
|
|
send_command_op(pctl, 1, MRR_CMD, i, 0);
|
|
}
|
|
writel(4, &chan->msch->ddrconf);
|
|
move_to_access_state(chan);
|
|
/* DDR3 and LPDDR3 are always 8 bank, no need detect */
|
|
sdram_params->ch[channel].bk = 3;
|
|
/* Detect Col and Row number*/
|
|
ret = sdram_col_row_detect(dram, channel, sdram_params);
|
|
if (ret)
|
|
goto error;
|
|
}
|
|
/* Find NIU DDR configuration */
|
|
ret = sdram_get_niu_config(sdram_params);
|
|
if (ret)
|
|
goto error;
|
|
|
|
dram_all_config(dram, sdram_params);
|
|
debug("%s done\n", __func__);
|
|
|
|
return 0;
|
|
error:
|
|
printf("DRAM init failed!\n");
|
|
hang();
|
|
}
|
|
|
|
static int setup_sdram(struct udevice *dev)
|
|
{
|
|
struct dram_info *priv = dev_get_priv(dev);
|
|
struct rk3188_sdram_params *params = dev_get_platdata(dev);
|
|
|
|
return sdram_init(priv, params);
|
|
}
|
|
|
|
static int rk3188_dmc_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct rk3188_sdram_params *params = dev_get_platdata(dev);
|
|
int ret;
|
|
|
|
/* rk3188 supports only one-channel */
|
|
params->num_channels = 1;
|
|
ret = dev_read_u32_array(dev, "rockchip,pctl-timing",
|
|
(u32 *)¶ms->pctl_timing,
|
|
sizeof(params->pctl_timing) / sizeof(u32));
|
|
if (ret) {
|
|
printf("%s: Cannot read rockchip,pctl-timing\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
ret = dev_read_u32_array(dev, "rockchip,phy-timing",
|
|
(u32 *)¶ms->phy_timing,
|
|
sizeof(params->phy_timing) / sizeof(u32));
|
|
if (ret) {
|
|
printf("%s: Cannot read rockchip,phy-timing\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
ret = dev_read_u32_array(dev, "rockchip,sdram-params",
|
|
(u32 *)¶ms->base,
|
|
sizeof(params->base) / sizeof(u32));
|
|
if (ret) {
|
|
printf("%s: Cannot read rockchip,sdram-params\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
ret = regmap_init_mem(dev, ¶ms->map);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_SPL_BUILD */
|
|
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
static int conv_of_platdata(struct udevice *dev)
|
|
{
|
|
struct rk3188_sdram_params *plat = dev_get_platdata(dev);
|
|
struct dtd_rockchip_rk3188_dmc *of_plat = &plat->of_plat;
|
|
int ret;
|
|
|
|
memcpy(&plat->pctl_timing, of_plat->rockchip_pctl_timing,
|
|
sizeof(plat->pctl_timing));
|
|
memcpy(&plat->phy_timing, of_plat->rockchip_phy_timing,
|
|
sizeof(plat->phy_timing));
|
|
memcpy(&plat->base, of_plat->rockchip_sdram_params, sizeof(plat->base));
|
|
/* rk3188 supports dual-channel, set default channel num to 2 */
|
|
plat->num_channels = 1;
|
|
ret = regmap_init_mem_platdata(dev, of_plat->reg,
|
|
ARRAY_SIZE(of_plat->reg) / 2,
|
|
&plat->map);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int rk3188_dmc_probe(struct udevice *dev)
|
|
{
|
|
#ifdef CONFIG_SPL_BUILD
|
|
struct rk3188_sdram_params *plat = dev_get_platdata(dev);
|
|
struct regmap *map;
|
|
struct udevice *dev_clk;
|
|
int ret;
|
|
#endif
|
|
struct dram_info *priv = dev_get_priv(dev);
|
|
|
|
priv->pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU);
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
ret = conv_of_platdata(dev);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
map = syscon_get_regmap_by_driver_data(ROCKCHIP_SYSCON_NOC);
|
|
if (IS_ERR(map))
|
|
return PTR_ERR(map);
|
|
priv->chan[0].msch = regmap_get_range(map, 0);
|
|
|
|
priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
|
|
priv->chan[0].pctl = regmap_get_range(plat->map, 0);
|
|
priv->chan[0].publ = regmap_get_range(plat->map, 1);
|
|
|
|
ret = rockchip_get_clk(&dev_clk);
|
|
if (ret)
|
|
return ret;
|
|
priv->ddr_clk.id = CLK_DDR;
|
|
ret = clk_request(dev_clk, &priv->ddr_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->cru = rockchip_get_cru();
|
|
if (IS_ERR(priv->cru))
|
|
return PTR_ERR(priv->cru);
|
|
ret = setup_sdram(dev);
|
|
if (ret)
|
|
return ret;
|
|
#else
|
|
priv->info.base = CONFIG_SYS_SDRAM_BASE;
|
|
priv->info.size = rockchip_sdram_size(
|
|
(phys_addr_t)&priv->pmu->sys_reg[2]);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk3188_dmc_get_info(struct udevice *dev, struct ram_info *info)
|
|
{
|
|
struct dram_info *priv = dev_get_priv(dev);
|
|
|
|
*info = priv->info;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ram_ops rk3188_dmc_ops = {
|
|
.get_info = rk3188_dmc_get_info,
|
|
};
|
|
|
|
static const struct udevice_id rk3188_dmc_ids[] = {
|
|
{ .compatible = "rockchip,rk3188-dmc" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(dmc_rk3188) = {
|
|
.name = "rockchip_rk3188_dmc",
|
|
.id = UCLASS_RAM,
|
|
.of_match = rk3188_dmc_ids,
|
|
.ops = &rk3188_dmc_ops,
|
|
#ifdef CONFIG_SPL_BUILD
|
|
.ofdata_to_platdata = rk3188_dmc_ofdata_to_platdata,
|
|
#endif
|
|
.probe = rk3188_dmc_probe,
|
|
.priv_auto_alloc_size = sizeof(struct dram_info),
|
|
#ifdef CONFIG_SPL_BUILD
|
|
.platdata_auto_alloc_size = sizeof(struct rk3188_sdram_params),
|
|
#endif
|
|
};
|