mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 22:24:32 +00:00
9ebde8849a
This supports i2c DM and enables CONFIG_DM_I2C for SoC LS1021A Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
248 lines
8.2 KiB
C
248 lines
8.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
* Copyright 2019 NXP
|
|
*/
|
|
|
|
#include <asm/io.h>
|
|
#include <common.h>
|
|
#include <fsl_dcu_fb.h>
|
|
#include <i2c.h>
|
|
#include <linux/fb.h>
|
|
|
|
#define PIXEL_CLK_LSB_REG 0x00
|
|
#define PIXEL_CLK_MSB_REG 0x01
|
|
#define VERT_FREQ_LSB_REG 0x02
|
|
#define VERT_FREQ_MSB_REG 0x03
|
|
#define TOTAL_PIXELS_LSB_REG 0x04
|
|
#define TOTAL_PIXELS_MSB_REG 0x05
|
|
#define TOTAL_LINES_LSB_REG 0x06
|
|
#define TOTAL_LINES_MSB_REG 0x07
|
|
#define TPI_INBUS_FMT_REG 0x08
|
|
#define TPI_INPUT_FMT_REG 0x09
|
|
#define TPI_OUTPUT_FMT_REG 0x0A
|
|
#define TPI_SYS_CTRL_REG 0x1A
|
|
#define TPI_PWR_STAT_REG 0x1E
|
|
#define TPI_AUDIO_HANDING_REG 0x25
|
|
#define TPI_AUDIO_INTF_REG 0x26
|
|
#define TPI_AUDIO_FREQ_REG 0x27
|
|
#define TPI_SET_PAGE_REG 0xBC
|
|
#define TPI_SET_OFFSET_REG 0xBD
|
|
#define TPI_RW_ACCESS_REG 0xBE
|
|
#define TPI_TRANS_MODE_REG 0xC7
|
|
|
|
#define TPI_INBUS_CLOCK_RATIO_1 (1 << 6)
|
|
#define TPI_INBUS_FULL_PIXEL_WIDE (1 << 5)
|
|
#define TPI_INBUS_RISING_EDGE (1 << 4)
|
|
#define TPI_INPUT_CLR_DEPTH_8BIT (0 << 6)
|
|
#define TPI_INPUT_VRANGE_EXPAN_AUTO (0 << 2)
|
|
#define TPI_INPUT_CLR_RGB (0 << 0)
|
|
#define TPI_OUTPUT_CLR_DEPTH_8BIT (0 << 6)
|
|
#define TPI_OUTPUT_VRANGE_COMPRE_AUTO (0 << 2)
|
|
#define TPI_OUTPUT_CLR_HDMI_RGB (0 << 0)
|
|
#define TPI_SYS_TMDS_OUTPUT (0 << 4)
|
|
#define TPI_SYS_AV_NORAML (0 << 3)
|
|
#define TPI_SYS_AV_MUTE (1 << 3)
|
|
#define TPI_SYS_DVI_MODE (0 << 0)
|
|
#define TPI_SYS_HDMI_MODE (1 << 0)
|
|
#define TPI_PWR_STAT_MASK (3 << 0)
|
|
#define TPI_PWR_STAT_D0 (0 << 0)
|
|
#define TPI_AUDIO_PASS_BASIC (0 << 0)
|
|
#define TPI_AUDIO_INTF_I2S (2 << 6)
|
|
#define TPI_AUDIO_INTF_NORMAL (0 << 4)
|
|
#define TPI_AUDIO_TYPE_PCM (1 << 0)
|
|
#define TPI_AUDIO_SAMP_SIZE_16BIT (1 << 6)
|
|
#define TPI_AUDIO_SAMP_FREQ_44K (2 << 3)
|
|
#define TPI_SET_PAGE_SII9022A 0x01
|
|
#define TPI_SET_OFFSET_SII9022A 0x82
|
|
#define TPI_RW_EN_SRC_TERMIN (1 << 0)
|
|
#define TPI_TRANS_MODE_ENABLE (0 << 7)
|
|
|
|
/* Programming of Silicon SIi9022a HDMI Transmitter */
|
|
int dcu_set_dvi_encoder(struct fb_videomode *videomode)
|
|
{
|
|
u8 temp;
|
|
u16 temp1, temp2;
|
|
u32 temp3;
|
|
#ifdef CONFIG_DM_I2C
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
ret = i2c_get_chip_for_busnum(CONFIG_SYS_I2C_DVI_BUS_NUM,
|
|
CONFIG_SYS_I2C_DVI_ADDR,
|
|
1, &dev);
|
|
if (ret) {
|
|
printf("%s: Cannot find udev for a bus %d\n", __func__,
|
|
CONFIG_SYS_I2C_DVI_BUS_NUM);
|
|
return ret;
|
|
}
|
|
|
|
/* Enable TPI transmitter mode */
|
|
temp = TPI_TRANS_MODE_ENABLE;
|
|
dm_i2c_write(dev, TPI_TRANS_MODE_REG, &temp, 1);
|
|
|
|
/* Enter into D0 state, full operation */
|
|
dm_i2c_read(dev, TPI_PWR_STAT_REG, &temp, 1);
|
|
temp &= ~TPI_PWR_STAT_MASK;
|
|
temp |= TPI_PWR_STAT_D0;
|
|
dm_i2c_write(dev, TPI_PWR_STAT_REG, &temp, 1);
|
|
|
|
/* Enable source termination */
|
|
temp = TPI_SET_PAGE_SII9022A;
|
|
dm_i2c_write(dev, TPI_SET_PAGE_REG, &temp, 1);
|
|
temp = TPI_SET_OFFSET_SII9022A;
|
|
dm_i2c_write(dev, TPI_SET_OFFSET_REG, &temp, 1);
|
|
|
|
dm_i2c_read(dev, TPI_RW_ACCESS_REG, &temp, 1);
|
|
temp |= TPI_RW_EN_SRC_TERMIN;
|
|
dm_i2c_write(dev, TPI_RW_ACCESS_REG, &temp, 1);
|
|
|
|
/* Set TPI system control */
|
|
temp = TPI_SYS_TMDS_OUTPUT | TPI_SYS_AV_NORAML | TPI_SYS_DVI_MODE;
|
|
dm_i2c_write(dev, TPI_SYS_CTRL_REG, &temp, 1);
|
|
|
|
/* Set pixel clock */
|
|
temp1 = PICOS2KHZ(videomode->pixclock) / 10;
|
|
temp = (u8)(temp1 & 0xFF);
|
|
dm_i2c_write(dev, PIXEL_CLK_LSB_REG, &temp, 1);
|
|
temp = (u8)(temp1 >> 8);
|
|
dm_i2c_write(dev, PIXEL_CLK_MSB_REG, &temp, 1);
|
|
|
|
/* Set total pixels per line */
|
|
temp1 = videomode->hsync_len + videomode->left_margin +
|
|
videomode->xres + videomode->right_margin;
|
|
temp = (u8)(temp1 & 0xFF);
|
|
dm_i2c_write(dev, TOTAL_PIXELS_LSB_REG, &temp, 1);
|
|
temp = (u8)(temp1 >> 8);
|
|
dm_i2c_write(dev, TOTAL_PIXELS_MSB_REG, &temp, 1);
|
|
|
|
/* Set total lines */
|
|
temp2 = videomode->vsync_len + videomode->upper_margin +
|
|
videomode->yres + videomode->lower_margin;
|
|
temp = (u8)(temp2 & 0xFF);
|
|
dm_i2c_write(dev, TOTAL_LINES_LSB_REG, &temp, 1);
|
|
temp = (u8)(temp2 >> 8);
|
|
dm_i2c_write(dev, TOTAL_LINES_MSB_REG, &temp, 1);
|
|
|
|
/* Set vertical frequency in Hz */
|
|
temp3 = temp1 * temp2;
|
|
temp3 = (PICOS2KHZ(videomode->pixclock) * 1000) / temp3;
|
|
temp1 = (u16)temp3 * 100;
|
|
temp = (u8)(temp1 & 0xFF);
|
|
dm_i2c_write(dev, VERT_FREQ_LSB_REG, &temp, 1);
|
|
temp = (u8)(temp1 >> 8);
|
|
dm_i2c_write(dev, VERT_FREQ_MSB_REG, &temp, 1);
|
|
|
|
/* Set TPI input bus and pixel repetition data */
|
|
temp = TPI_INBUS_CLOCK_RATIO_1 | TPI_INBUS_FULL_PIXEL_WIDE |
|
|
TPI_INBUS_RISING_EDGE;
|
|
dm_i2c_write(dev, TPI_INBUS_FMT_REG, &temp, 1);
|
|
|
|
/* Set TPI AVI Input format data */
|
|
temp = TPI_INPUT_CLR_DEPTH_8BIT | TPI_INPUT_VRANGE_EXPAN_AUTO |
|
|
TPI_INPUT_CLR_RGB;
|
|
dm_i2c_write(dev, TPI_INPUT_FMT_REG, &temp, 1);
|
|
|
|
/* Set TPI AVI Output format data */
|
|
temp = TPI_OUTPUT_CLR_DEPTH_8BIT | TPI_OUTPUT_VRANGE_COMPRE_AUTO |
|
|
TPI_OUTPUT_CLR_HDMI_RGB;
|
|
dm_i2c_write(dev, TPI_OUTPUT_FMT_REG, &temp, 1);
|
|
|
|
/* Set TPI audio configuration write data */
|
|
temp = TPI_AUDIO_PASS_BASIC;
|
|
dm_i2c_write(dev, TPI_AUDIO_HANDING_REG, &temp, 1);
|
|
|
|
temp = TPI_AUDIO_INTF_I2S | TPI_AUDIO_INTF_NORMAL |
|
|
TPI_AUDIO_TYPE_PCM;
|
|
dm_i2c_write(dev, TPI_AUDIO_INTF_REG, &temp, 1);
|
|
|
|
temp = TPI_AUDIO_SAMP_SIZE_16BIT | TPI_AUDIO_SAMP_FREQ_44K;
|
|
dm_i2c_write(dev, TPI_AUDIO_FREQ_REG, &temp, 1);
|
|
#else
|
|
i2c_set_bus_num(CONFIG_SYS_I2C_DVI_BUS_NUM);
|
|
|
|
/* Enable TPI transmitter mode */
|
|
temp = TPI_TRANS_MODE_ENABLE;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_TRANS_MODE_REG, 1, &temp, 1);
|
|
|
|
/* Enter into D0 state, full operation */
|
|
i2c_read(CONFIG_SYS_I2C_DVI_ADDR, TPI_PWR_STAT_REG, 1, &temp, 1);
|
|
temp &= ~TPI_PWR_STAT_MASK;
|
|
temp |= TPI_PWR_STAT_D0;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_PWR_STAT_REG, 1, &temp, 1);
|
|
|
|
/* Enable source termination */
|
|
temp = TPI_SET_PAGE_SII9022A;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_SET_PAGE_REG, 1, &temp, 1);
|
|
temp = TPI_SET_OFFSET_SII9022A;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_SET_OFFSET_REG, 1, &temp, 1);
|
|
|
|
i2c_read(CONFIG_SYS_I2C_DVI_ADDR, TPI_RW_ACCESS_REG, 1, &temp, 1);
|
|
temp |= TPI_RW_EN_SRC_TERMIN;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_RW_ACCESS_REG, 1, &temp, 1);
|
|
|
|
/* Set TPI system control */
|
|
temp = TPI_SYS_TMDS_OUTPUT | TPI_SYS_AV_NORAML | TPI_SYS_DVI_MODE;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_SYS_CTRL_REG, 1, &temp, 1);
|
|
|
|
/* Set pixel clock */
|
|
temp1 = PICOS2KHZ(videomode->pixclock) / 10;
|
|
temp = (u8)(temp1 & 0xFF);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, PIXEL_CLK_LSB_REG, 1, &temp, 1);
|
|
temp = (u8)(temp1 >> 8);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, PIXEL_CLK_MSB_REG, 1, &temp, 1);
|
|
|
|
/* Set total pixels per line */
|
|
temp1 = videomode->hsync_len + videomode->left_margin +
|
|
videomode->xres + videomode->right_margin;
|
|
temp = (u8)(temp1 & 0xFF);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TOTAL_PIXELS_LSB_REG, 1, &temp, 1);
|
|
temp = (u8)(temp1 >> 8);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TOTAL_PIXELS_MSB_REG, 1, &temp, 1);
|
|
|
|
/* Set total lines */
|
|
temp2 = videomode->vsync_len + videomode->upper_margin +
|
|
videomode->yres + videomode->lower_margin;
|
|
temp = (u8)(temp2 & 0xFF);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TOTAL_LINES_LSB_REG, 1, &temp, 1);
|
|
temp = (u8)(temp2 >> 8);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TOTAL_LINES_MSB_REG, 1, &temp, 1);
|
|
|
|
/* Set vertical frequency in Hz */
|
|
temp3 = temp1 * temp2;
|
|
temp3 = (PICOS2KHZ(videomode->pixclock) * 1000) / temp3;
|
|
temp1 = (u16)temp3 * 100;
|
|
temp = (u8)(temp1 & 0xFF);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, VERT_FREQ_LSB_REG, 1, &temp, 1);
|
|
temp = (u8)(temp1 >> 8);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, VERT_FREQ_MSB_REG, 1, &temp, 1);
|
|
|
|
/* Set TPI input bus and pixel repetition data */
|
|
temp = TPI_INBUS_CLOCK_RATIO_1 | TPI_INBUS_FULL_PIXEL_WIDE |
|
|
TPI_INBUS_RISING_EDGE;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_INBUS_FMT_REG, 1, &temp, 1);
|
|
|
|
/* Set TPI AVI Input format data */
|
|
temp = TPI_INPUT_CLR_DEPTH_8BIT | TPI_INPUT_VRANGE_EXPAN_AUTO |
|
|
TPI_INPUT_CLR_RGB;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_INPUT_FMT_REG, 1, &temp, 1);
|
|
|
|
/* Set TPI AVI Output format data */
|
|
temp = TPI_OUTPUT_CLR_DEPTH_8BIT | TPI_OUTPUT_VRANGE_COMPRE_AUTO |
|
|
TPI_OUTPUT_CLR_HDMI_RGB;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_OUTPUT_FMT_REG, 1, &temp, 1);
|
|
|
|
/* Set TPI audio configuration write data */
|
|
temp = TPI_AUDIO_PASS_BASIC;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_AUDIO_HANDING_REG, 1, &temp, 1);
|
|
|
|
temp = TPI_AUDIO_INTF_I2S | TPI_AUDIO_INTF_NORMAL |
|
|
TPI_AUDIO_TYPE_PCM;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_AUDIO_INTF_REG, 1, &temp, 1);
|
|
|
|
temp = TPI_AUDIO_SAMP_SIZE_16BIT | TPI_AUDIO_SAMP_FREQ_44K;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_AUDIO_FREQ_REG, 1, &temp, 1);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|