Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-22 03:03:05 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/cssi/cmpc885/cmpc885.c
Christophe Leroy 0ec8ebef87 board: cssi: Activate SMC relocation on CMPC885 board for MIAE device 
When CMPC885 board is used for MIAE device, SCC2 SCC3 and SMC2
are used for serial lines. Therefore only SCC4 is available for
handling the TDM line.

In order to use SCC4 in QMC mode without loosing SMC2, SMC2
must be relocated.

Activate SMC relocation and relocate SMC2 at offset 0x1fc0 which
is unused.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-05 07:26:53 +02:00

894 lines
28 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2010-2020 CS Group
* Charles Frey <charles.frey@c-s.fr>
* Florent Trinh Thai <florent.trinh-thai@c-s.fr>
* Christophe Leroy <christophe.leroy@c-s.fr>
*
* Board specific routines for the CMPC885 board
*/
#include <env.h>
#include <common.h>
#include <mpc8xx.h>
#include <asm/cpm_8xx.h>
#include <asm/io.h>
#include <dm.h>
#include <stdio.h>
#include <stdarg.h>
#include <watchdog.h>
#include <serial.h>
#include <hang.h>
#include <flash.h>
#include <init.h>
#include <fdt_support.h>
#include <linux/delay.h>
#include <spi.h>
#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
#define ADDR_CPLD_R_RESET ((unsigned short __iomem *)CONFIG_CPLD_BASE)
#define ADDR_CPLD_R_ETAT ((unsigned short __iomem *)(CONFIG_CPLD_BASE + 2))
#define ADDR_CPLD_R_TYPE ((unsigned char __iomem *)(CONFIG_CPLD_BASE + 3))
#define PATH_PHY2 "/soc@ff000000/mdio@e00/ethernet-phy@2"
#define PATH_PHY3 "/soc@ff000000/mdio@e00/ethernet-phy@3"
#define PATH_ETH1 "/soc@ff000000/ethernet@1e00"
#define FIBER_PHY PATH_PHY2
#define R_ETAT_PRES_BASE 0x0040
#define R_RESET_STATUS 0x0400
#define R_RST_STATUS 0x0004
int ft_board_setup(void *blob, struct bd_info *bd)
{
const char *sync = "receive";
ft_cpu_setup(blob, bd);
/* BRG */
do_fixup_by_path_u32(blob, "/soc/cpm", "brg-frequency", bd->bi_busfreq, 1);
/* MAC addr */
fdt_fixup_ethernet(blob);
/* Bus Frequency for CPM */
do_fixup_by_path_u32(blob, "/soc", "bus-frequency", bd->bi_busfreq, 1);
/* E1 interface - Set data rate */
do_fixup_by_path_u32(blob, "/localbus/e1", "data-rate", 2, 1);
/* E1 interface - Set channel phase to 0 */
do_fixup_by_path_u32(blob, "/localbus/e1", "channel-phase", 0, 1);
/* E1 interface - rising edge sync pulse transmit */
do_fixup_by_path(blob, "/localbus/e1", "rising-edge-sync-pulse", sync, strlen(sync), 1);
/* MIAE only */
if (!(in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE))
return 0;
return ft_board_setup_common(blob);
}
void ft_board_setup_phy3(void)
{
/* switch to phy3 with gpio, we'll only use phy3 */
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
cpm8xx_t __iomem *cp = (cpm8xx_t __iomem *)&immr->im_cpm;
setbits_be32(&cp->cp_pedat, 0x00002000);
}
int checkboard(void)
{
serial_puts("Board: ");
/* Is a motherboard present ? */
if (in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE)
return checkboard_common();
printf("CMPC885 (CS GROUP)\n");
return 0;
}
#define MAX_SPI_BYTES 0x20
#define EE_OFF_MAC1 0x10
#define EE_OFF_MAC2 0x16
/* Reads MAC addresses from SPI EEPROM */
static int setup_mac(void)
{
uchar din[MAX_SPI_BYTES];
int ret;
unsigned long ident = 0x08005120;
ret = read_eeprom(din, sizeof(din));
if (ret)
return ret;
if (memcmp(din + EE_OFF_MAC1, &ident, sizeof(ident)) == 0)
eth_env_set_enetaddr("ethaddr", din + EE_OFF_MAC1);
if (memcmp(din + EE_OFF_MAC2, &ident, sizeof(ident)) == 0)
eth_env_set_enetaddr("eth1addr", din + EE_OFF_MAC2);
return 0;
}
int misc_init_r(void)
{
/* Verify mother board presence */
if (in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE) {
misc_init_r_common();
} else {
env_set("config", CFG_BOARD_CMPCXXX);
env_set("hostname", CFG_BOARD_CMPCXXX);
}
if (setup_mac())
printf("Error retrieving mac addresses\n");
/* Protection ON by default */
flash_protect(FLAG_PROTECT_SET, CFG_SYS_FLASH_BASE, 0xffffffff, &flash_info[0]);
return 0;
}
void iop_setup_mcr(void)
{
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
iop8xx_t __iomem *iop = &immr->im_ioport;
cpm8xx_t __iomem *cp = &immr->im_cpm;
/* Wait reset on FPGA_F */
udelay(100);
/* We must initialize data before changing direction */
setbits_be16(&iop->iop_pcdat, 0x088E);
setbits_be16(&iop->iop_pddat, 0x0001);
setbits_be32(&cp->cp_pbdat, 0x00029510);
setbits_be32(&cp->cp_pedat, 0x00000002);
/*
* PAPAR[13] = 0 [0x0004] -> GPIO: ()
* PAPAR[12] = 0 [0x0008] -> GPIO: ()
* PAPAR[9] = 1 [0x0040] -> GPIO: (PCM_IN_12_MPC)
* PAPAR[8] = 1 [0x0080] -> GPIO: (PCM_OUT_12_MPC)
* PAPAR[7] = 1 [0x0100] -> GPIO: (TDM_BCLK_MPC)
* PAPAR[6] = 1 [0x0200] -> GPIO: (CLK2)
*/
clrsetbits_be16(&iop->iop_papar, 0x03CC, 0x03C0);
/*
* PBODR[16] = 1 [0x00008000] -> GPIO: (PROG_FPGA_MEZZ)
*/
setbits_be16(&cp->cp_pbodr, 0x00008000);
/*
* PBDIR[27] = 1 [0x00000010] -> GPIO: (WR_TEMP2)
* PBDIR[26] = 1 [0x00000020] -> GPIO: (BRG02)
* PBDIR[23] = 1 [0x00000100] -> GPIO: (CS_TEMP2)
* PBDIR[18] = 1 [0x00002000] -> GPIO: (RTS2)
* PBDIR[16] = 1 [0x00008000] -> GPIO: (PROG_FPGA_MEZZ)
* PBDIR[15] = 1 [0x00010000] -> GPIO: (BRG03)
* PBDIR[14] = 1 [0x00020000] -> GPIO: (CS_TEMP)
*/
setbits_be32(&cp->cp_pbdir, 0x0003A130);
/*
* PBPAR[20] = 1 [0x00000800] -> GPIO: (SMRXD2)
* PBPAR[17] = 0 [0x00004000] -> GPIO: (DONE_FPGA_MEZZ)
* PBPAR[16] = 0 [0x00008000] -> GPIO: (PROG_FPGA_MEZZ)
*/
clrsetbits_be32(&cp->cp_pbpar, 0x0000C800, 0x00000800);
/*
* PCPAR[14] = 0 [0x0002] -> GPIO: (CS_POT2)
*/
clrbits_be16(&iop->iop_pcpar, 0x0002);
/*
* PDPAR[14] = 1 [0x0002] -> GPIO: (TDM_FS_MPC)
* PDPAR[11] = 1 [0x0010] -> GPIO: (RXD3)
* PDPAR[10] = 1 [0x0020] -> GPIO: (TXD3)
* PDPAR[9] = 1 [0x0040] -> GPIO: (TXD4)
* PDPAR[7] = 1 [0x0100] -> GPIO: (RTS3)
* PDPAR[5] = 1 [0x0400] -> GPIO: (CLK8)
* PDPAR[3] = 1 [0x1000] -> GPIO: (CLK7)
*/
setbits_be16(&iop->iop_pdpar, 0x1572);
/*
* PEPAR[27] = 1 [0x00000010] -> GPIO: (R2_RXER)
* PEPAR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV)
* PEPAR[25] = 1 [0x00000040] -> GPIO: (RXD4)
* PEPAR[24] = 1 [0x00000080] -> GPIO: (BRG01)
* PEPAR[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
* PEPAR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1)
* PEPAR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0)
* PEPAR[20] = 1 [0x00000800] -> GPIO: (SMTXD2)
* PEPAR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
* PEPAR[17] = 1 [0x00004000] -> GPIO: (CLK5)
* PEPAR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK)
* PEPAR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
* PEPAR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
*/
clrsetbits_be32(&cp->cp_pepar, 0x0003DFF0, 0x0003DEF0);
/*
* PADIR[9] = 1 [0x0040] -> GPIO: (PCM_IN_12_MPC)
* PADIR[8] = 1 [0x0080] -> GPIO: (PCM_OUT_12_MPC)
* PADIR[5] = 1 [0x0400] -> GPIO: ()
*/
setbits_be16(&iop->iop_padir, 0x04C0);
/*
* PCDIR[15] = 1 [0x0001] -> GPIO: (WP_EEPROM2)
* PCDIR[14] = 1 [0x0002] -> GPIO: (CS_POT2)
* PCDIR[13] = 1 [0x0004] -> GPIO: (CS_POT1)
* PCDIR[12] = 1 [0x0008] -> GPIO: (CS_EEPROM2)
* PCDIR[8] = 1 [0x0080] -> GPIO: (CS_CODEC_FAV)
* PCDIR[4] = 1 [0x0800] -> GPIO: (CS_CODEC_RADIO)
*/
setbits_be16(&iop->iop_pcdir, 0x088F);
/*
* PDDIR[9] = 1 [0x0040] -> GPIO: (TXD4)
* PDDIR[6] = 0 [0x0200] -> GPIO: (INIT_FPGA_RADIO)
* PDDIR[2] = x [0x2000] -> Reserved
* PDDIR[1] = 0 [0x4000] -> ODR for PD10 : (TXD3)
* PDDIR[0] = 0 [0x8000] -> ODR for PD8 : (R_MDC)
*/
clrsetbits_be16(&iop->iop_pddir, 0xC240, 0x0040);
/*
* PEDIR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE)
* PEDIR[27] = 1 [0x00000010] -> GPIO: (R2_RXER)
* PEDIR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV)
* PEDIR[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
* PEDIR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1)
* PEDIR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0)
* PEDIR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
* PEDIR[18] = 1 [0x00002000] -> GPIO: (PROG_FPGA_RADIO)
* PEDIR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK)
* PEDIR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
* PEDIR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
*/
clrsetbits_be32(&cp->cp_pedir, 0x0003B732, 0x0003B632);
/*
* PAODR[10] = 1 [0x0020] -> GPIO: (INIT_FPGA_F)
*/
setbits_be16(&iop->iop_paodr, 0x0020); // set_bit
/*
* PEODR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE)
* PEODR[18] = 1 [0x00002000] -> GPIO: (FPGA_RADIO)
*/
setbits_be32(&cp->cp_peodr, 0x00002002);
/*
* PESO[24] = 1 [0x00000080] -> GPIO: (BRG01)
* PESO[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
* PESO[20] = 1 [0x00000800] -> GPIO: (SMTXD2)
* PESO[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
* PESO[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
* PESO[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
*/
clrsetbits_be32(&cp->cp_peso, 0x00031980, 0x00031880);
/* Disable CS for device */
/* PROGFPGA down */
clrbits_be32(&cp->cp_pbdat, 0x00008000);
/* PROGFPGA down */
clrbits_be32(&cp->cp_pedat, 0x00002000);
udelay(1); /* Wait more than 300ns */
/*
* We do not set the PROG signal of the C4E1 because
* there is a conflic with the CS of the EEPROM.
* I don't know why there is not the same problem
* with the FPGA_R
*/
/* PROGFPGA up */
setbits_be32(&cp->cp_pedat, 0x00002000);
}
static void iop_setup_cmpc885(void)
{
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
iop8xx_t __iomem *iop = &immr->im_ioport;
cpm8xx_t __iomem *cp = &immr->im_cpm;
/* We must initialize data before changing direction */
out_be16(&iop->iop_pcdat, 0x0000);
out_be16(&iop->iop_pddat, 0x0001);
out_be32(&cp->cp_pbdat, 0x00021400);
out_be32(&cp->cp_pedat, 0x00000000);
/*
* PAPAR[13] = 0 [0x0004] -> GPIO: ()
* PAPAR[12] = 0 [0x0008] -> GPIO: ()
* PAPAR[9] = 0 [0x0040] -> GPIO: ()
* PAPAR[8] = 0 [0x0080] -> GPIO: ()
* PAPAR[7] = 0 [0x0100] -> GPIO: ()
* PAPAR[6] = 0 [0x0200] -> GPIO: ()
*/
clrbits_be16(&iop->iop_papar, 0x03CC);
/*
* PBPAR[20] = 0 [0x00000800] -> GPIO: ()
* PBPAR[17] = 0 [0x00004000] -> GPIO: ()
* PBPAR[16] = 0 [0x00008000] -> GPIO: ()
*/
clrbits_be32(&cp->cp_pbpar, 0x0000C800);
/*
* PCPAR[14] = 0 [0x0002] -> GPIO: ()
*/
clrbits_be16(&iop->iop_pcpar, 0x0002);
/*
* PDPAR[14] = 0 [0x0002] -> GPIO: ()
* PDPAR[11] = 0 [0x0010] -> GPIO: ()
* PDPAR[10] = 0 [0x0020] -> GPIO: ()
* PDPAR[9] = 0 [0x0040] -> GPIO: ()
* PDPAR[7] = 0 [0x0100] -> GPIO: ()
* PDPAR[5] = 0 [0x0400] -> GPIO: ()
* PDPAR[3] = 0 [0x1000] -> GPIO: ()
*/
clrbits_be16(&iop->iop_pdpar, 0x1572);
/*
* PEPAR[27] = 0 [0x00000010] -> GPIO: ()
* PEPAR[26] = 0 [0x00000020] -> GPIO: ()
* PEPAR[25] = 0 [0x00000040] -> GPIO: ()
* PEPAR[24] = 0 [0x00000080] -> GPIO: ()
* PEPAR[23] = 0 [0x00000100] -> GPIO: ()
* PEPAR[22] = 0 [0x00000200] -> GPIO: ()
* PEPAR[21] = 0 [0x00000400] -> GPIO: ()
* PEPAR[20] = 0 [0x00000800] -> GPIO: ()
* PEPAR[19] = 0 [0x00001000] -> GPIO: ()
* PEPAR[17] = 0 [0x00004000] -> GPIO: ()
* PEPAR[16] = 0 [0x00008000] -> GPIO: ()
* PEPAR[15] = 0 [0x00010000] -> GPIO: ()
* PEPAR[14] = 0 [0x00020000] -> GPIO: ()
*/
clrbits_be32(&cp->cp_pepar, 0x0003DFF0);
/*
* PADIR[9] = 0 [0x0040] -> GPIO: ()
* PADIR[8] = 0 [0x0080] -> GPIO: ()
* PADIR[5] = 0 [0x0400] -> GPIO: ()
*/
clrbits_be16(&iop->iop_padir, 0x04C0);
/*
* In/Out or per. Function 0/1
* PBDIR[27] = 0 [0x00000010] -> GPIO: ()
* PBDIR[26] = 0 [0x00000020] -> GPIO: ()
* PBDIR[23] = 0 [0x00000100] -> GPIO: ()
* PBDIR[17] = 0 [0x00004000] -> GPIO: ()
* PBDIR[16] = 0 [0x00008000] -> GPIO: ()
*/
clrbits_be32(&cp->cp_pbdir, 0x0000C130);
/*
* PCDIR[15] = 0 [0x0001] -> GPIO: ()
* PCDIR[14] = 0 [0x0002] -> GPIO: ()
* PCDIR[13] = 0 [0x0004] -> GPIO: ()
* PCDIR[12] = 0 [0x0008] -> GPIO: ()
* PCDIR[8] = 0 [0x0080] -> GPIO: ()
* PCDIR[4] = 0 [0x0800] -> GPIO: ()
*/
clrbits_be16(&iop->iop_pcdir, 0x088F);
/*
* PDDIR[9] = 0 [0x0040] -> GPIO: ()
* PDDIR[6] = 0 [0x0200] -> GPIO: ()
* PDDIR[2] = x [0x2000] -> Reserved
* PDDIR[1] = 0 [0x4000] -> ODR for PD10 : ()
* PDDIR[0] = 0 [0x8000] -> ODR for PD8 : (R_MDC)
*/
clrbits_be16(&iop->iop_pddir, 0xC240);
/*
* PEDIR[30] = 0 [0x00000002] -> GPIO: ()
* PEDIR[27] = 0 [0x00000010] -> GPIO: ()
* PEDIR[26] = 0 [0x00000020] -> GPIO: ()
* PEDIR[23] = 0 [0x00000100] -> GPIO: ()
* PEDIR[22] = 0 [0x00000200] -> GPIO: ()
* PEDIR[21] = 0 [0x00000400] -> GPIO: ()
* PEDIR[19] = 0 [0x00001000] -> GPIO: ()
* PEDIR[18] = 0 [0x00002000] -> GPIO: ()
* PEDIR[16] = 0 [0x00008000] -> GPIO: ()
* PEDIR[15] = 0 [0x00010000] -> GPIO: ()
* PEDIR[14] = 0 [0x00020000] -> GPIO: ()
*/
clrbits_be32(&cp->cp_pedir, 0x0003B732);
/*
* PAODR[10] = 0 [0x0020] -> GPIO: ()
*/
clrbits_be16(&iop->iop_paodr, 0x0020);
/*
* PBODR[16] = 0 [0x00008000] -> GPIO: ()
*/
clrbits_be16(&cp->cp_pbodr, 0x00008000);
/*
* PEODR[30] = 0 [0x00000002] -> GPIO: ()
* PEODR[18] = 0 [0x00002000] -> GPIO: ()
*/
clrbits_be32(&cp->cp_peodr, 0x00002002);
/*
* PESO[24] = 0 [0x00000080] -> GPIO: ()
* PESO[23] = 0 [0x00000100] -> GPIO: ()
* PESO[20] = 0 [0x00000800] -> GPIO: ()
* PESO[19] = 0 [0x00001000] -> GPIO: ()
* PESO[15] = 0 [0x00010000] -> GPIO: ()
* PESO[14] = 0 [0x00020000] -> GPIO: ()
*/
clrbits_be32(&cp->cp_peso, 0x00031980);
}
void iop_setup_miae(void)
{
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
iop8xx_t __iomem *iop = &immr->im_ioport;
cpm8xx_t __iomem *cp = &immr->im_cpm;
/* Wait reset on FPGA_F */
udelay(100);
/* Load CPM relocation code */
cpm_load_patch(cp);
/* Set the front panel LED color to red */
clrbits_8((unsigned char __iomem *)CONFIG_FPGA_BASE + 0x44, 0x02);
/* We must initialize data before changing direction */
setbits_be16(&iop->iop_pcdat, 0x0888);
setbits_be16(&iop->iop_pddat, 0x0201);
setbits_be32(&cp->cp_pbdat, 0x00021510);
setbits_be32(&cp->cp_pedat, 0x00000002);
/*
* PAPAR[13] = 1 [0x0004] -> GPIO: (RXD2)
* PAPAR[12] = 1 [0x0008] -> GPIO: (TXD2)
* PAPAR[9] = 1 [0x0040] -> GPIO: (TDM1O)
* PAPAR[8] = 1 [0x0080] -> GPIO: (TDM1I)
* PAPAR[7] = 1 [0x0100] -> GPIO: (TDM_BCLK_MPC)
* PAPAR[6] = 1 [0x0200] -> GPIO: (CLK2)
*/
setbits_be16(&iop->iop_papar, 0x03CC);
/*
* PBODR[16] = 0 [0x00008000] -> GPIO: (L1ST4)
*/
clrbits_be16(&cp->cp_pbodr, 0x00008000);
/*
* PBDIR[27] = 1 [0x00000010] -> GPIO: (WR_TEMP2)
* PBDIR[26] = 1 [0x00000020] -> GPIO: (BRG02)
* PBDIR[23] = 1 [0x00000100] -> GPIO: (CS_TEMP2)
* PBDIR[18] = 1 [0x00002000] -> GPIO: (RTS2)
* PBDIR[16] = 0 [0x00008000] -> GPIO: (L1ST4)
* PBDIR[15] = 1 [0x00010000] -> GPIO: (BRG03)
* PBDIR[14] = 1 [0x00020000] -> GPIO: (CS_TEMP)
*/
clrsetbits_be32(&cp->cp_pbdir, 0x0003A130, 0x00032130);
/*
* PBPAR[20] = 1 [0x00000800] -> GPIO: (SMRXD2)
* PBPAR[17] = 1 [0x00004000] -> GPIO: (L1ST3)
* PBPAR[16] = 1 [0x00008000] -> GPIO: (L1ST4)
*/
setbits_be32(&cp->cp_pbpar, 0x0000C800);
/*
* PCPAR[14] = 1 [0x0002] -> GPIO: (L1ST2)
*/
setbits_be16(&iop->iop_pcpar, 0x0002);
/*
* PDPAR[14] = 1 [0x0002] -> GPIO: (TDM_FS_MPC)
* PDPAR[11] = 1 [0x0010] -> GPIO: (RXD3)
* PDPAR[10] = 1 [0x0020] -> GPIO: (TXD3)
* PDPAR[9] = 1 [0x0040] -> GPIO: (TXD4)
* PDPAR[7] = 1 [0x0100] -> GPIO: (RTS3)
* PDPAR[5] = 1 [0x0400] -> GPIO: (CLK8)
* PDPAR[3] = 1 [0x1000] -> GPIO: (CLK7)
*/
setbits_be16(&iop->iop_pdpar, 0x1572);
/*
* PEPAR[27] = 1 [0x00000010] -> GPIO: (R2_RXER)
* PEPAR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV)
* PEPAR[25] = 1 [0x00000040] -> GPIO: (RXD4)
* PEPAR[24] = 1 [0x00000080] -> GPIO: (BRG01)
* PEPAR[23] = 1 [0x00000100] -> GPIO: (L1ST1)
* PEPAR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1)
* PEPAR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0)
* PEPAR[20] = 1 [0x00000800] -> GPIO: (SMTXD2)
* PEPAR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
* PEPAR[17] = 1 [0x00004000] -> GPIO: (CLK5)
* PEPAR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK)
* PEPAR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
* PEPAR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
*/
setbits_be32(&cp->cp_pepar, 0x0003DFF0);
/*
* PADIR[9] = 1 [0x0040] -> GPIO: (TDM1O)
* PADIR[8] = 1 [0x0080] -> GPIO: (TDM1I)
* PADIR[5] = 0 [0x0400] -> GPIO: ()
*/
clrsetbits_be16(&iop->iop_padir, 0x04C0, 0x00C0);
/*
* PCDIR[15] = 1 [0x0001] -> GPIO: (WP_EEPROM2)
* PCDIR[14] = 1 [0x0002] -> GPIO: (L1ST2)
* PCDIR[13] = 0 [0x0004] -> GPIO: ()
* PCDIR[12] = 1 [0x0008] -> GPIO: (CS_EEPROM2)
* PCDIR[8] = 1 [0x0080] -> GPIO: (CS_CODEC_2)
* PCDIR[4] = 1 [0x0800] -> GPIO: (CS_CODEC_1)
*/
clrsetbits_be16(&iop->iop_pcdir, 0x088F, 0x088B);
/*
* PDDIR[9] = 1 [0x0040] -> GPIO: (TXD4)
* PDDIR[6] = 1 [0x0200] -> GPIO: (CS_CODEC_3)
*/
setbits_be16(&iop->iop_pddir, 0x0240);
/*
* PEDIR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE)
* PEDIR[27] = 1 [0x00000010] -> GPIO: (R2_RXER)
* PEDIR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV)
* PEDIR[23] = 1 [0x00000100] -> GPIO: (L1ST1)
* PEDIR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1)
* PEDIR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0)
* PEDIR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
* PEDIR[18] = 1 [0x00002000] -> GPIO: (PE18)
* PEDIR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK)
* PEDIR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
* PEDIR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
*/
setbits_be32(&cp->cp_pedir, 0x0003B732);
/*
* PAODR[10] = 1 [0x0020] -> GPIO: (INIT_FPGA_F)
*/
setbits_be16(&iop->iop_paodr, 0x0020);
/*
* PEODR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE)
* PEODR[18] = 0 [0x00002000] -> GPIO: (PE18)
*/
clrsetbits_be32(&cp->cp_peodr, 0x00002002, 0x00000002);
/*
* PESO[24] = 1 [0x00000080] -> GPIO: (BRG01)
* PESO[23] = 1 [0x00000100] -> GPIO: (L1ST1)
* PESO[20] = 1 [0x00000800] -> GPIO: (SMTXD2)
* PESO[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
* PESO[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
* PESO[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
*/
setbits_be32(&cp->cp_peso, 0x00031980);
}
/* Specific board initialization */
int board_early_init_f(void)
{
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
iop8xx_t __iomem *iop = &immr->im_ioport;
cpm8xx_t __iomem *cp = &immr->im_cpm;
/* MPC885 Port settings common to all boards */
setbits_be16(&iop->iop_padat, 0x0000);
/* Port A (MPC885 reference manual - 34.2) */
/*
* In/Out or per. Function 0/1
* PADIR[15] = 0 [0x0001] -> GPIO: (USB_RXD)
* PADIR[14] = 0 [0x0002] -> GPIO: (USB_OE)
* PADIR[13] = 0 [0x0004] -> GPIO: ()
* PADIR[12] = 0 [0x0008] -> GPIO: ()
* PADIR[11] = 1 [0x0010] -> GPIO: (R1_TXD0)
* PADIR[10] = 0 [0x0020] -> GPIO: ()
* PADIR[7] = 0 [0x0100] -> GPIO: ()
* PADIR[6] = 0 [0x0200] -> GPIO: ()
* PADIR[4] = 1 [0x0800] -> GPIO: (R1_TXD1)
* PADIR[3] = 0 [0x1000] -> GPIO: (R1_RXER)
* PADIR[2] = 0 [0x2000] -> GPIO: (R1_CRS_DV)
* PADIR[1] = 0 [0x4000] -> GPIO: (R1_RXD0)
* PADIR[0] = 0 [0x8000] -> GPIO: (R1_RXD1)
*/
clrsetbits_be16(&iop->iop_padir, 0xFB3F, 0x0810);
/*
* Open drain or active output
* PAODR[15] = x [0x0001]
* PAODR[14] = 0 [0x0002]
* PAODR[13] = x [0x0004]
* PAODR[12] = 0 [0x0008]
* PAODR[11] = 0 [0x0010]
* PAODR[9] = 0 [0x0040]
* PAODR[8] = 0 [0x0080]
* PAODR[7] = 0 [0x0100]
*/
clrbits_be16(&iop->iop_paodr, 0x01DF);
/*
* GPIO or per. Function
* PAPAR[15] = 1 [0x0001] -> GPIO: (USB_RXD)
* PAPAR[14] = 1 [0x0002] -> GPIO: (USB_OE)
* PAPAR[11] = 1 [0x0010] -> GPIO: (R1_TXD0)
* PAPAR[10] = 0 [0x0020] -> GPIO: (INIT_FPGA_F)
* PAPAR[5] = 0 [0x0400] -> GPIO: ()
* PAPAR[4] = 1 [0x0800] -> GPIO: (R1_TXD1)
* PAPAR[3] = 1 [0x1000] -> GPIO: (R1_RXER)
* PAPAR[2] = 1 [0x2000] -> GPIO: (R1_CRS_DV)
* PAPAR[1] = 1 [0x4000] -> GPIO: (R1_RXD0)
* PAPAR[0] = 1 [0x8000] -> GPIO: (R1_RXD1)
*/
clrsetbits_be16(&iop->iop_papar, 0xFC33, 0xF813);
/* Port B (MPC885 reference manual - 34.3) */
/*
* In/Out or per. Function 0/1
* PBDIR[31] = 0 [0x00000001] -> GPIO: (R1_REF_CLK)
* PBDIR[30] = 1 [0x00000002] -> GPIO: (CLK)
* PBDIR[29] = 1 [0x00000004] -> GPIO: (MOSI)
* PBDIR[28] = 1 [0x00000008] -> GPIO: (MISO)
* PBDIR[25] = 0 [0x00000040] -> GPIO: (SMTXD1)
* PBDIR[24] = 0 [0x00000080] -> GPIO: (SMRXD1)
* PBDIR[22] = 0 [0x00000200] -> GPIO: (INIT_FPGA_MEZZ)
* PBDIR[21] = 1 [0x00000400] -> GPIO: (CS_EEPROM)
* PBDIR[20] = 0 [0x00000800] -> GPIO: (SMRXD2)
* PBDIR[19] = 1 [0x00001000] -> GPIO: (WR_TEMP)
* PBDIR[17] = 0 [0x00004000] -> GPIO: (DONE_FPGA_MEZZ)
*/
clrsetbits_be32(&cp->cp_pbdir, 0x00005ECF, 0x0000140E);
/*
* Open drain or active output
* PBODR[31] = 0 [0x00000001] -> GPIO: (R1_REF_CLK)
* PBODR[30] = 0 [0x00000002] -> GPIO: (CLK)
* PBODR[29] = 0 [0x00000004] -> GPIO: (MOSI)
* PBODR[28] = 0 [0x00000008] -> GPIO: (MISO)
* PBODR[27] = 0 [0x00000010] -> GPIO: (WR_TEMP2)
* PBODR[26] = 0 [0x00000020] -> GPIO: (BRG02)
* PBODR[25] = 0 [0x00000040] -> GPIO: (SMTXD1)
* PBODR[24] = 0 [0x00000080] -> GPIO: (SMRXD1)
* PBODR[23] = 0 [0x00000100] -> GPIO: (CS_TEMP2)
* PBODR[22] = 0 [0x00000200] -> GPIO: (INIT_FPGA_MEZZ)
* PBODR[21] = 0 [0x00000400] -> GPIO: (CS_EEPROM)
* PBODR[20] = 0 [0x00000800] -> GPIO: (SMRXD2)
* PBODR[19] = 0 [0x00001000] -> GPIO: (WR_TEMP)
* PBODR[18] = 0 [0x00002000] -> GPIO: (RTS2)
* PBODR[17] = 0 [0x00004000] -> GPIO: (DONE_FPGA_MEZZ)
*/
clrbits_be16(&cp->cp_pbodr, 0x00007FFF);
/*
* GPIO or per. Function
* PBPAR[31] = 1 [0x00000001] -> GPIO: (R1_REF_CLK)
* PBPAR[30] = 1 [0x00000002] -> GPIO: (CLK)
* PBPAR[29] = 1 [0x00000004] -> GPIO: (MOSI)
* PBPAR[28] = 1 [0x00000008] -> GPIO: (MISO)
* PBPAR[27] = 0 [0x00000010] -> GPIO: (WR_TEMP2)
* PBPAR[26] = 0 [0x00000020] -> GPIO: (BRG02)
* PBPAR[25] = 1 [0x00000040] -> GPIO: (SMTXD1)
* PBPAR[24] = 1 [0x00000080] -> GPIO: (SMRXD1)
* PBPAR[23] = 0 [0x00000100] -> GPIO: (CS_TEMP2)
* PBPAR[22] = 0 [0x00000200] -> GPIO: (INIT_FPGA_MEZZ)
* PBPAR[21] = 0 [0x00000400] -> GPIO: (CS_EEPROM)
* PBPAR[19] = 0 [0x00001000] -> GPIO: (WR_TEMP)
* PBPAR[18] = 0 [0x00002000] -> GPIO: (RTS2)
* PBPAR[15] = 0 [0x00010000] -> GPIO: (BRG03)
* PBPAR[14] = 0 [0x00020000] -> GPIO: (CS_TEMP)
*/
clrsetbits_be32(&cp->cp_pbpar, 0x000337FF, 0x000000CF);
/* Port C (MPC885 Reference Manual - 34.4) */
/*
* In/Out or per. Function 0/1
* PCDIR[11] = 0 [0x0010] -> GPIO: (USB_RXP)
* PCDIR[10] = 0 [0x0020] -> GPIO: (USB_RXN)
* PCDIR[9] = 0 [0x0040] -> GPIO: (CTS2)
* PCDIR[7] = 1 [0x0100] -> GPIO: (USB_TXP)
* PCDIR[6] = 1 [0x0200] -> GPIO: (USB_TXN)
* PCDIR[5] = 0 [0x0400] -> GPIO: (CTS3)
*/
clrsetbits_be16(&iop->iop_pcdir, 0x0770, 0x0300);
/*
* GPIO or per. Function
* PCPAR[15] = 0 [0x0001] -> GPIO: (WP_EEPROM2)
* PCPAR[13] = 0 [0x0004] -> GPIO: (CS_POT1)
* PCPAR[12] = 0 [0x0008] -> GPIO: (CS_EEPROM2)
* PCPAR[11] = 0 [0x0010] -> GPIO: (USB_RXP)
* PCPAR[10] = 0 [0x0020] -> GPIO: (USB_RXN)
* PCPAR[9] = 0 [0x0040] -> GPIO: (CTS2)
* PCPAR[8] = 0 [0x0080] -> GPIO: (CS_CODEC_FAV)
* PCPAR[7] = 1 [0x0100] -> GPIO: (USB_TXP)
* PCPAR[6] = 1 [0x0200] -> GPIO: (USB_TXN)
* PCPAR[5] = 0 [0x0400] -> GPIO: (CTS3)
* PCPAR[4] = 0 [0x0800] -> GPIO: (CS_CODEC_RADIO)
*/
clrsetbits_be16(&iop->iop_pcpar, 0x0FFD, 0x0300);
/*
* Special Option register
* PCSO[15] = 0 [0x0001] -> GPIO: (WP_EEPROM2)
* PCSO[14] = 0 [0x0002] -> GPIO: (CS_POT2)
* PCSO[13] = x [0x0004] -> Reserved
* PCSO[12] = x [0x0008] -> Reserved
* PCSO[11] = 1 [0x0010] -> GPIO: (USB_RXP)
* PCSO[10] = 1 [0x0020] -> GPIO: (USB_RXN)
* PCSO[9] = 1 [0x0040] -> GPIO: (CTS2)
* PCSO[8] = 0 [0x0080] -> GPIO: (CS_CODEC_FAV)
* PCSO[7] = 0 [0x0100] -> GPIO: (USB_TXP)
* PCSO[6] = 0 [0x0200] -> GPIO: (USB_TXN)
* PCSO[5] = 1 [0x0400] -> GPIO: (CTS3)
* PCSO[4] = 0 [0x0800] -> GPIO: (CS_CODEC_RADIO)
*/
clrsetbits_be16(&iop->iop_pcso, 0x0FF3, 0x0470);
/*
* Interrupt or IO
* PCINT[15] = 0 [0x0001] -> GPIO: ()
* PCINT[14] = 0 [0x0002] -> GPIO: ()
* PCINT[13] = 0 [0x0004] -> GPIO: ()
* PCINT[12] = 0 [0x0008] -> GPIO: ()
* PCINT[11] = 0 [0x0010] -> GPIO: (USB_RXP)
* PCINT[10] = 0 [0x0020] -> GPIO: (USB_RXN)
* PCINT[9] = 0 [0x0040] -> GPIO: ()
* PCINT[8] = 0 [0x0080] -> GPIO: ()
* PCINT[7] = 0 [0x0100] -> GPIO: (USB_TXP)
* PCINT[6] = 0 [0x0200] -> GPIO: (USB_TXN)
* PCINT[5] = 0 [0x0400] -> GPIO: ()
* PCINT[4] = 0 [0x0800] -> GPIO: ()
*/
clrbits_be16(&iop->iop_pcint, 0x0FFF);
/* Port D (MPC885 Reference Manual - 34.5) */
/*
* In/Out or per. Function 0/1
* PDDIR[15] = 1 [0x0001] -> GPIO: (CS_NAND)
* PDDIR[14] = 0 [0x0002] -> GPIO: (TDM_FS_MPC)
* PDDIR[13] = 1 [0x0004] -> GPIO: (ALE_NAND)
* PDDIR[12] = 1 [0x0008] -> GPIO: (CLE_NAND)
* PDDIR[11] = 0 [0x0010] -> GPIO: (RXD3)
* PDDIR[10] = 0 [0x0020] -> GPIO: (TXD3)
* PDDIR[9] = 1 [0x0040] -> GPIO: (TXD4)
* PDDIR[8] = 0 [0x0080] -> GPIO: (R_MDC)
* PDDIR[7] = 0 [0x0100] -> GPIO: (RTS3)
* PDDIR[5] = 0 [0x0400] -> GPIO: (CLK8)
* PDDIR[4] = 0 [0x0800] -> GPIO: (CLK4)
* PDDIR[3] = 0 [0x1000] -> GPIO: (CLK7)
*/
clrsetbits_be16(&iop->iop_pddir, 0x1DFF, 0x004D);
/*
* GPIO or per. Function
* PDPAR[15] = 0 [0x0001] -> GPIO: (CS_NAND)
* PDPAR[13] = 0 [0x0004] -> GPIO: (ALE_NAND)
* PDPAR[12] = 0 [0x0008] -> GPIO: (CLE_NAND)
* PDPAR[8] = 1 [0x0080] -> GPIO: (R_MDC)
* PDPAR[6] = 0 [0x0200] -> GPIO: (INIT_FPGA_RADIO)
* PDPAR[4] = 1 [0x0800] -> GPIO: (CLK4)
*/
clrsetbits_be16(&iop->iop_pdpar, 0x0A8D, 0x0880);
/* Port E (MPC885 Reference Manual - 34.6) */
/*
* In/Out or per. Function 0/1
* PEDIR[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
* PEDIR[29] = 1 [0x00000004] -> GPIO: (USB_SPEED)
* PEDIR[28] = 1 [0x00000008] -> GPIO: (USB_SUSPEND)
* PEDIR[25] = 0 [0x00000040] -> GPIO: (RXD4)
* PEDIR[24] = 0 [0x00000080] -> GPIO: (BRG01)
* PEDIR[20] = 0 [0x00000800] -> GPIO: (SMTXD2)
* PEDIR[17] = 0 [0x00004000] -> GPIO: (CLK5)
*/
clrsetbits_be32(&cp->cp_pedir, 0x000048CD, 0x0000000C);
/*
* open drain or active output
* PEODR[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
* PEODR[29] = 0 [0x00000004] -> GPIO: (USB_SPEED)
* PEODR[28] = 1 [0x00000008] -> GPIO: (USB_SUSPEND)
* PEODR[27] = 0 [0x00000010] -> GPIO: (R2_RXER)
* PEODR[26] = 0 [0x00000020] -> GPIO: (R2_CRS_DV)
* PEODR[25] = 0 [0x00000040] -> GPIO: (RXD4)
* PEODR[24] = 0 [0x00000080] -> GPIO: (BRG01)
* PEODR[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
* PEODR[22] = 0 [0x00000200] -> GPIO: (R2_RXD1)
* PEODR[21] = 0 [0x00000400] -> GPIO: (R2_RXD0)
* PEODR[20] = 0 [0x00000800] -> GPIO: (SMTXD2)
* PEODR[19] = 0 [0x00001000] -> GPIO: (R2_TXEN)
* PEODR[17] = 0 [0x00004000] -> GPIO: (CLK5)
* PEODR[16] = 0 [0x00008000] -> GPIO: (R2_REF_CLK)
*/
clrsetbits_be32(&cp->cp_peodr, 0x0000DFFD, 0x00000008);
/*
* GPIO or per. Function
* PEPAR[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
* PEPAR[30] = 0 [0x00000002] -> GPIO: (PROG_FPGA_FIRMWARE)
* PEPAR[29] = 0 [0x00000004] -> GPIO: (USB_SPEED)
* PEPAR[28] = 0 [0x00000008] -> GPIO: (USB_SUSPEND)
* PEPAR[18] = 0 [0x00002000] -> GPIO: (PROG_FPGA_RADIO)
*/
clrbits_be32(&cp->cp_pepar, 0x0000200F);
/*
* Special Option register
* PESO[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
* PESO[30] = 0 [0x00000002] -> GPIO: (PROG_FPGA_FIRMWARE)
* PESO[29] = 0 [0x00000004] -> GPIO: (USB_SPEED)
* PESO[28] = 0 [0x00000008] -> GPIO: (USB_SUSPEND)
* PESO[27] = 0 [0x00000010] -> GPIO: (R2_RXER)
* PESO[26] = 0 [0x00000020] -> GPIO: (R2_CRS_DV)
* PESO[25] = 0 [0x00000040] -> GPIO: (RXD4)
* PESO[22] = 0 [0x00000200] -> GPIO: (R2_RXD1)
* PESO[21] = 0 [0x00000400] -> GPIO: (R2_RXD0)
* PESO[18] = 0 [0x00002000] -> GPIO: (PROG_FPGA_RADIO)
* PESO[17] = 0 [0x00004000] -> GPIO: (CLK5)
* PESO[16] = 0 [0x00008000] -> GPIO: (R2_REF_CLK)
*/
clrbits_be32(&cp->cp_peso, 0x0000E67F);
/* Is a motherboard present ? */
if (in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE) {
/* Initialize signal PROG_FPGA_FIRMWARE */
out_be32(&cp->cp_pedat, 0x00000002);
out_be32(&cp->cp_peodr, 0x00000002);
out_be32(&cp->cp_pedir, 0x00000002);
/* Check if fpga firmware is loaded */
if (!(in_be32(&cp->cp_pedat) & 0x00000001)) {
/* Load fpga firmware */
/* Activate PROG_FPGA_FIRMWARE for 1 usec */
clrbits_be32(&cp->cp_pedat, 0x00000002);
udelay(1);
setbits_be32(&cp->cp_pedat, 0x00000002);
/* Wait 200 msec and check DONE_FPGA_FIRMWARE */
mdelay(200);
if (!(in_be32(&cp->cp_pedat) & 0x00000001))
hang();
/* Send a reset signal and wait for 20 msec */
clrbits_be16(ADDR_CPLD_R_RESET, R_RST_STATUS);
mdelay(20);
setbits_be16(ADDR_CPLD_R_RESET, R_RST_STATUS);
}
/* Wait 300 msec and check the reset state */
mdelay(300);
if (!(in_be16(ADDR_CPLD_R_RESET) & R_RESET_STATUS))
hang();
iop_setup_common();
} else {
iop_setup_cmpc885();
}
return 0;
}
Reference in a new issue View git blame Copy permalink