u-boot/arch/arm/cpu/ixp/npe/include/IxSspAcc.h
Peter Tyser 84ad688473 arm: Move cpu/$CPU to arch/arm/cpu/$CPU
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-04-13 09:13:24 +02:00

1271 lines
34 KiB
C

/**
* @file IxSspAcc.h
*
* @brief Header file for the IXP400 SSP Serial Port Access (IxSspAcc)
*
* @version $Revision: 0.1 $
*
* @par
* IXP400 SW Release version 2.0
*
* -- Copyright Notice --
*
* @par
* Copyright 2001-2005, Intel Corporation.
* All rights reserved.
*
* @par
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Intel Corporation nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* @par
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @par
* -- End of Copyright Notice --
*/
/**
* @defgroup IxSspAcc IXP400 SSP Serial Port Access (IxSspAcc) API
*
* @brief IXP400 SSP Serial Port Access Public API
*
* @{
*/
#ifndef IXSSPACC_H
#define IXSSPACC_H
#ifdef __ixp46X
#include "IxOsal.h"
/*
* Section for enum
*/
/**
* @ingroup IxSspAcc
*
* @enum IxSspAccDataSize
*
* @brief The data sizes in bits that are supported by the protocol
*/
typedef enum
{
DATA_SIZE_TOO_SMALL = 0x2,
DATA_SIZE_4 = 0x3,
DATA_SIZE_5,
DATA_SIZE_6,
DATA_SIZE_7,
DATA_SIZE_8,
DATA_SIZE_9,
DATA_SIZE_10,
DATA_SIZE_11,
DATA_SIZE_12,
DATA_SIZE_13,
DATA_SIZE_14,
DATA_SIZE_15,
DATA_SIZE_16,
DATA_SIZE_TOO_BIG
} IxSspAccDataSize;
/**
* @ingroup IxSspAcc
*
* @enum IxSspAccPortStatus
*
* @brief The status of the SSP port to be set to enable/disable
*/
typedef enum
{
SSP_PORT_DISABLE = 0x0,
SSP_PORT_ENABLE,
INVALID_SSP_PORT_STATUS
} IxSspAccPortStatus;
/**
* @ingroup IxSspAcc
*
* @enum IxSspAccFrameFormat
*
* @brief The frame format that is to be used - SPI, SSP, or Microwire
*/
typedef enum
{
SPI_FORMAT = 0x0,
SSP_FORMAT,
MICROWIRE_FORMAT,
INVALID_FORMAT
} IxSspAccFrameFormat;
/**
* @ingroup IxSspAcc
*
* @enum IxSspAccClkSource
*
* @brief The source to produce the SSP serial clock
*/
typedef enum
{
ON_CHIP_CLK = 0x0,
EXTERNAL_CLK,
INVALID_CLK_SOURCE
} IxSspAccClkSource;
/**
* @ingroup IxSspAcc
*
* @enum IxSspAccSpiSclkPhase
*
* @brief The SPI SCLK Phase:
* 0 - SCLK is inactive one cycle at the start of a frame and 1/2 cycle at the
* end of a frame.
* 1 - SCLK is inactive 1/2 cycle at the start of a frame and one cycle at the
* end of a frame.
*/
typedef enum
{
START_ONE_END_HALF = 0x0,
START_HALF_END_ONE,
INVALID_SPI_PHASE
} IxSspAccSpiSclkPhase;
/**
* @ingroup IxSspAcc
*
* @enum IxSspAccSpiSclkPolarity
*
* @brief The SPI SCLK Polarity can be set to either low or high.
*/
typedef enum
{
SPI_POLARITY_LOW = 0x0,
SPI_POLARITY_HIGH,
INVALID_SPI_POLARITY
} IxSspAccSpiSclkPolarity;
/**
* @ingroup IxSspAcc
*
* @enum IxSspAccMicrowireCtlWord
*
* @brief The Microwire control word can be either 8 or 16 bit.
*/
typedef enum
{
MICROWIRE_8_BIT = 0x0,
MICROWIRE_16_BIT,
INVALID_MICROWIRE_CTL_WORD
} IxSspAccMicrowireCtlWord;
/**
* @ingroup IxSspAcc
*
* @enum IxSspAccFifoThreshold
*
* @brief The threshold in frames (each frame is defined by IxSspAccDataSize)
* that can be set for the FIFO to trigger a threshold exceed when
* checking with the ExceedThresholdCheck functions or an interrupt
* when it is enabled.
*/
typedef enum
{
FIFO_TSHLD_1 = 0x0,
FIFO_TSHLD_2,
FIFO_TSHLD_3,
FIFO_TSHLD_4,
FIFO_TSHLD_5,
FIFO_TSHLD_6,
FIFO_TSHLD_7,
FIFO_TSHLD_8,
FIFO_TSHLD_9,
FIFO_TSHLD_10,
FIFO_TSHLD_11,
FIFO_TSHLD_12,
FIFO_TSHLD_13,
FIFO_TSHLD_14,
FIFO_TSHLD_15,
FIFO_TSHLD_16,
INVALID_FIFO_TSHLD
} IxSspAccFifoThreshold;
/**
* @ingroup IxSspAcc
*
* @enum IX_SSP_STATUS
*
* @brief The statuses that can be returned in a SSP Serial Port Access
*/
typedef enum
{
IX_SSP_SUCCESS = IX_SUCCESS, /**< Success status */
IX_SSP_FAIL, /**< Fail status */
IX_SSP_RX_FIFO_OVERRUN_HANDLER_MISSING, /**<
Rx FIFO Overrun handler is NULL. */
IX_SSP_RX_FIFO_HANDLER_MISSING, /**<
Rx FIFO threshold hit or above handler is NULL
*/
IX_SSP_TX_FIFO_HANDLER_MISSING, /**<
Tx FIFO threshold hit or below handler is NULL
*/
IX_SSP_FIFO_NOT_EMPTY_FOR_SETTING_CTL_CMD, /**<
Tx FIFO not empty and therefore microwire
control command size setting is not allowed. */
IX_SSP_INVALID_FRAME_FORMAT_ENUM_VALUE, /**<
frame format selected is invalid. */
IX_SSP_INVALID_DATA_SIZE_ENUM_VALUE, /**<
data size selected is invalid. */
IX_SSP_INVALID_CLOCK_SOURCE_ENUM_VALUE, /**<
source clock selected is invalid. */
IX_SSP_INVALID_TX_FIFO_THRESHOLD_ENUM_VALUE, /**<
Tx FIFO threshold selected is invalid. */
IX_SSP_INVALID_RX_FIFO_THRESHOLD_ENUM_VALUE, /**<
Rx FIFO threshold selected is invalid. */
IX_SSP_INVALID_SPI_PHASE_ENUM_VALUE, /**<
SPI phase selected is invalid. */
IX_SSP_INVALID_SPI_POLARITY_ENUM_VALUE, /**<
SPI polarity selected is invalid. */
IX_SSP_INVALID_MICROWIRE_CTL_CMD_ENUM_VALUE, /**<
Microwire control command selected is invalid
*/
IX_SSP_INT_UNBIND_FAIL, /**< Interrupt unbind fail to unbind SSP
interrupt */
IX_SSP_INT_BIND_FAIL, /**< Interrupt bind fail during init */
IX_SSP_RX_FIFO_NOT_EMPTY, /**<
Rx FIFO not empty while trying to change data
size. */
IX_SSP_TX_FIFO_NOT_EMPTY, /**<
Rx FIFO not empty while trying to change data
size or microwire control command size. */
IX_SSP_POLL_MODE_BLOCKING, /**<
poll mode selected blocks interrupt mode from
being selected. */
IX_SSP_TX_FIFO_HIT_BELOW_THRESHOLD, /**<
Tx FIFO level hit or below threshold. */
IX_SSP_TX_FIFO_EXCEED_THRESHOLD, /**<
Tx FIFO level exceeded threshold. */
IX_SSP_RX_FIFO_HIT_ABOVE_THRESHOLD, /**<
Rx FIFO level hit or exceeded threshold. */
IX_SSP_RX_FIFO_BELOW_THRESHOLD, /**<
Rx FIFO level below threshold. */
IX_SSP_BUSY, /**< SSP is busy. */
IX_SSP_IDLE, /**< SSP is idle. */
IX_SSP_OVERRUN_OCCURRED, /**<
SSP has experienced an overrun. */
IX_SSP_NO_OVERRUN, /**<
SSP did not experience an overrun. */
IX_SSP_NOT_SUPORTED, /**< hardware does not support SSP */
IX_SSP_NOT_INIT, /**< SSP Access not intialized */
IX_SSP_NULL_POINTER /**< parameter passed in is NULL */
} IX_SSP_STATUS;
/**
* @ingroup IxSspAcc
*
* @brief SSP Rx FIFO Overrun handler
*
* This function is called for the client to handle Rx FIFO Overrun that occurs
* in the SSP hardware
*/
typedef void (*RxFIFOOverrunHandler)(void);
/**
* @ingroup IxSspAcc
*
* @brief SSP Rx FIFO Threshold hit or above handler
*
* This function is called for the client to handle Rx FIFO threshold hit or
* or above that occurs in the SSP hardware
*/
typedef void (*RxFIFOThresholdHandler)(void);
/**
* @ingroup IxSspAcc
*
* @brief SSP Tx FIFO Threshold hit or below handler
*
* This function is called for the client to handle Tx FIFO threshold hit or
* or below that occurs in the SSP hardware
*/
typedef void (*TxFIFOThresholdHandler)(void);
/*
* Section for struct
*/
/**
* @ingroup IxSspAcc
*
* @brief contains all the variables required to initialize the SSP serial port
* hardware.
*
* Structure to be filled and used for calling initialization
*/
typedef struct
{
IxSspAccFrameFormat FrameFormatSelected;/**<Select between SPI, SSP and
Microwire. */
IxSspAccDataSize DataSizeSelected; /**<Select between 4 and 16. */
IxSspAccClkSource ClkSourceSelected; /**<Select clock source to be
on-chip or external. */
IxSspAccFifoThreshold TxFIFOThresholdSelected;
/**<Select Tx FIFO threshold
between 1 to 16. */
IxSspAccFifoThreshold RxFIFOThresholdSelected;
/**<Select Rx FIFO threshold
between 1 to 16. */
BOOL RxFIFOIntrEnable; /**<Enable/disable Rx FIFO
threshold interrupt. Disabling
this interrupt will require
the use of the polling function
RxFIFOExceedThresholdCheck. */
BOOL TxFIFOIntrEnable; /**<Enable/disable Tx FIFO
threshold interrupt. Disabling
this interrupt will require
the use of the polling function
TxFIFOExceedThresholdCheck. */
RxFIFOThresholdHandler RxFIFOThsldHdlr; /**<Pointer to function to handle
a Rx FIFO interrupt. */
TxFIFOThresholdHandler TxFIFOThsldHdlr; /**<Pointer to function to handle
a Tx FIFO interrupt. */
RxFIFOOverrunHandler RxFIFOOverrunHdlr; /**<Pointer to function to handle
a Rx FIFO overrun interrupt. */
BOOL LoopbackEnable; /**<Select operation mode to be
normal or loopback mode. */
IxSspAccSpiSclkPhase SpiSclkPhaseSelected;
/**<Select SPI SCLK phase to start
with one inactive cycle and end
with 1/2 inactive cycle or
start with 1/2 inactive cycle
and end with one inactive
cycle. (Only used in
SPI format). */
IxSspAccSpiSclkPolarity SpiSclkPolaritySelected;
/**<Select SPI SCLK idle state
to be low or high. (Only used in
SPI format). */
IxSspAccMicrowireCtlWord MicrowireCtlWordSelected;
/**<Select Microwire control
format to be 8 or 16-bit. (Only
used in Microwire format). */
UINT8 SerialClkRateSelected; /**<Select between 0 (1.8432Mbps)
and 255 (7.2Kbps). The
formula used is Bit rate =
3.6864x10^6 /
(2 x (SerialClkRateSelect + 1))
*/
} IxSspInitVars;
/**
* @ingroup IxSspAcc
*
* @brief contains counters of the SSP statistics
*
* Structure contains all values of counters and associated overflows.
*/
typedef struct
{
UINT32 ixSspRcvCounter; /**<Total frames received. */
UINT32 ixSspXmitCounter; /**<Total frames transmitted. */
UINT32 ixSspOverflowCounter;/**<Total occurrences of overflow. */
} IxSspAccStatsCounters;
/*
* Section for prototypes interface functions
*/
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccInit (
IxSspInitVars *initVarsSelected);
*
* @brief Initializes the SSP Access module.
*
* @param "IxSspAccInitVars [in] *initVarsSelected" - struct containing required
* variables for initialization
*
* Global Data :
* - None.
*
* This API will initialize the SSP Serial Port hardware to the user specified
* configuration. Then it will enable the SSP Serial Port.
* *NOTE*: Once interrupt or polling mode is selected, the mode cannot be
* changed via the interrupt enable/disable function but the init needs to be
* called again to change it.
*
* @return
* - IX_SSP_SUCCESS - Successfully initialize and enable the SSP
* serial port.
* - IX_SSP_RX_FIFO_HANDLER_MISSING - interrupt mode is selected but RX FIFO
* handler pointer is NULL
* - IX_SSP_TX_FIFO_HANDLER_MISSING - interrupt mode is selected but TX FIFO
* handler pointer is NULL
* - IX_SSP_RX_FIFO_OVERRUN_HANDLER_MISSING - interrupt mode is selected but
* RX FIFO Overrun handler pointer is NULL
* - IX_SSP_RX_FIFO_NOT_EMPTY - Rx FIFO not empty, data size change is not
* allowed.
* - IX_SSP_TX_FIFO_NOT_EMPTY - Tx FIFO not empty, data size change is not
* allowed.
* - IX_SSP_INVALID_FRAME_FORMAT_ENUM_VALUE - frame format selected is invalid
* - IX_SSP_INVALID_DATA_SIZE_ENUM_VALUE - data size selected is invalid
* - IX_SSP_INVALID_CLOCK_SOURCE_ENUM_VALUE - clock source selected is invalid
* - IX_SSP_INVALID_TX_FIFO_THRESHOLD_ENUM_VALUE - Tx FIFO threshold level
* selected is invalid
* - IX_SSP_INVALID_RX_FIFO_THRESHOLD_ENUM_VALUE - Rx FIFO threshold level
* selected is invalid
* - IX_SSP_INVALID_SPI_PHASE_ENUM_VALUE - SPI phase selected is invalid
* - IX_SSP_INVALID_SPI_POLARITY_ENUM_VALUE - SPI polarity selected is invalid
* - IX_SSP_INVALID_MICROWIRE_CTL_CMD_ENUM_VALUE - microwire control command
* size is invalid
* - IX_SSP_INT_UNBIND_FAIL - interrupt handler failed to unbind SSP interrupt
* - IX_SSP_INT_BIND_FAIL - interrupt handler failed to bind to SSP interrupt
* hardware trigger
* - IX_SSP_NOT_SUPORTED - hardware does not support SSP
* - IX_SSP_NULL_POINTER - parameter passed in is NULL
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccInit (IxSspInitVars *initVarsSelected);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccUninit (
void)
*
* @brief Un-initializes the SSP Serial Port Access component
*
* @param - None
*
* Global Data :
* - None.
*
* This API will disable the SSP Serial Port hardware. The client can call the
* init function again if they wish to enable the SSP.
*
* @return
* - IX_SSP_SUCCESS - successfully uninit SSP component
* - IX_SSP_INT_UNBIND_FAIL - interrupt handler failed to unbind SSP interrupt
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccUninit (void);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccFIFODataSubmit (
UINT16 *data,
UINT32 amtOfData)
*
* @brief Inserts data into the SSP Serial Port's FIFO
*
* @param "UINT16 [in] *data" - pointer to the location to transmit the data
* from
* "UINT32 [in] amtOfData" - number of data to be transmitted.
*
* Global Data :
* - None.
*
* This API will insert the amount of data specified by "amtOfData" from buffer
* pointed to by "data" into the FIFO to be transmitted by the hardware.
*
* @return
* - IX_SSP_SUCCESS - Data inserted successfully into FIFO
* - IX_SSP_FAIL - FIFO insufficient space
* - IX_SSP_NULL_POINTER - data pointer passed by client is NULL
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccFIFODataSubmit (
UINT16* data,
UINT32 amtOfData);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccFIFODataReceive (
UINT16 *data,
UINT32 amtOfData)
*
* @brief Extract data from the SSP Serial Port's FIFO
*
* @param "UINT16 [in] *data" - pointer to the location to receive the data into
* "UINT32 [in] amtOfData" - number of data to be received.
*
* Global Data :
* - None.
*
* This API will extract the amount of data specified by "amtOfData" from the
* FIFO already received by the hardware into the buffer pointed to by "data".
*
* @return
* - IX_SSP_SUCCESS - Data extracted successfully from FIFO
* - IX_SSP_FAIL - FIFO has no data
* - IX_SSP_NULL_POINTER - data pointer passed by client is NULL
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccFIFODataReceive (
UINT16* data,
UINT32 amtOfData);
/**
* Polling Functions
*/
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccTxFIFOHitOrBelowThresholdCheck (
void)
*
* @brief Check if the Tx FIFO threshold has been hit or fallen below.
*
* @param - None
*
* Global Data :
* - None.
*
* This API will return whether the Tx FIFO threshold has been exceeded or not
*
* @return
* - IX_SSP_TX_FIFO_HIT_BELOW_THRESHOLD - Tx FIFO level hit or below threshold .
* - IX_SSP_TX_FIFO_EXCEED_THRESHOLD - Tx FIFO level exceeded threshold.
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccTxFIFOHitOrBelowThresholdCheck (
void);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccRxFIFOHitOrAboveThresholdCheck (
void)
*
* @brief Check if the Rx FIFO threshold has been hit or exceeded.
*
* @param - None
*
* Global Data :
* - None.
*
* This API will return whether the Rx FIFO level is below threshold or not
*
* @return
* - IX_SSP_RX_FIFO_HIT_ABOVE_THRESHOLD - Rx FIFO level hit or exceeded threshold
* - IX_SSP_RX_FIFO_BELOW_THRESHOLD - Rx FIFO level below threshold
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccRxFIFOHitOrAboveThresholdCheck (
void);
/**
* Configuration functions
*
* NOTE: These configurations are not required to be called once init is called
* unless configurations need to be changed on the fly.
*/
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccSSPPortStatusSet (
IxSspAccPortStatus portStatusSelected)
*
* @brief Enables/disables the SSP Serial Port hardware.
*
* @param "IxSspAccPortStatus [in] portStatusSelected" - Set the SSP port to
* enable or disable
*
* Global Data :
* - None.
*
* This API will enable/disable the SSP Serial Port hardware.
* NOTE: This function is called by init to enable the SSP after setting up the
* configurations and by uninit to disable the SSP.
*
* @return
* - IX_SSP_SUCCESS - Port status set with valid enum value
* - IX_SSP_FAIL - invalid enum value
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccSSPPortStatusSet (
IxSspAccPortStatus portStatusSelected);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccFrameFormatSelect (
IxSspAccFrameFormat frameFormatSelected)
*
* @brief Sets the frame format for the SSP Serial Port hardware
*
* @param "IxSspAccFrameFormat [in] frameFormatSelected" - The frame format of
* SPI, SSP or Microwire can be selected as the format
*
* Global Data :
* - None.
*
* This API will set the format for the transfers via user input.
* *NOTE*: The SSP hardware will be disabled to clear the FIFOs. Then its
* previous state (enabled/disabled) restored after changing the format.
*
* @return
* - IX_SSP_SUCCESS - frame format set with valid enum value
* - IX_SSP_INVALID_FRAME_FORMAT_ENUM_VALUE - invalid frame format value
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccFrameFormatSelect (
IxSspAccFrameFormat frameFormatSelected);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccDataSizeSelect (
IxSspAccDataSize dataSizeSelected)
*
* @brief Sets the data size for transfers
*
* @param "IxSspAccDataSize [in] dataSizeSelected" - The data size between 4
* and 16 that can be selected for data transfers
*
* Global Data :
* - None.
*
* This API will set the data size for the transfers via user input. It will
* disallow the change of the data size if either of the Rx/Tx FIFO is not
* empty to prevent data loss.
* *NOTE*: The SSP port will be disabled if the FIFOs are found to be empty and
* if between the check and disabling of the SSP (which clears the
* FIFOs) data is received into the FIFO, it might be lost.
* *NOTE*: The FIFOs can be cleared by disabling the SSP Port if necessary to
* force the data size change.
*
* @return
* - IX_SSP_SUCCESS - data size set with valid enum value
* - IX_SSP_RX_FIFO_NOT_EMPTY - Rx FIFO not empty, data size change is not
* allowed.
* - IX_SSP_TX_FIFO_NOT_EMPTY - Tx FIFO not empty, data size change is not
* allowed.
* - IX_SSP_INVALID_DATA_SIZE_ENUM_VALUE - invalid enum value
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccDataSizeSelect (
IxSspAccDataSize dataSizeSelected);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccClockSourceSelect(
IxSspAccClkSource clkSourceSelected)
*
* @brief Sets the clock source of the SSP Serial Port hardware
*
* @param "IxSspAccClkSource [in] clkSourceSelected" - The clock source from
* either external source on on-chip can be selected as the source
*
* Global Data :
* - None.
*
* This API will set the clock source for the transfers via user input.
*
* @return
* - IX_SSP_SUCCESS - clock source set with valid enum value
* - IX_SSP_INVALID_CLOCK_SOURCE_ENUM_VALUE - invalid enum value
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccClockSourceSelect (
IxSspAccClkSource clkSourceSelected);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccSerialClockRateConfigure (
UINT8 serialClockRateSelected)
*
* @brief Sets the on-chip Serial Clock Rate of the SSP Serial Port hardware.
*
* @param "UINT8 [in] serialClockRateSelected" - The serial clock rate that can
* be set is between 7.2Kbps and 1.8432Mbps. The formula used is
* Bit rate = 3.6864x10^6 / (2 x (SerialClockRateSelected + 1))
*
* Global Data :
* - None.
*
* This API will set the serial clock rate for the transfers via user input.
*
* @return
* - IX_SSP_SUCCESS - Serial clock rate configured successfully
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccSerialClockRateConfigure (
UINT8 serialClockRateSelected);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccRxFIFOIntEnable (
RxFIFOThresholdHandler rxFIFOIntrHandler)
*
* @brief Enables service request interrupt whenever the Rx FIFO hits its
* threshold
*
* @param "void [in] *rxFIFOIntrHandler(UINT32)" - function pointer to the
* interrupt handler for the Rx FIFO exceeded.
*
* Global Data :
* - None.
*
* This API will enable the service request interrupt for the Rx FIFO
*
* @return
* - IX_SSP_SUCCESS - Rx FIFO level interrupt enabled successfully
* - IX_SSP_RX_FIFO_HANDLER_MISSING - missing handler for Rx FIFO level interrupt
* - IX_SSP_POLL_MODE_BLOCKING - poll mode is selected at init, interrupt not
* allowed to be enabled. Use init to enable interrupt mode.
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccRxFIFOIntEnable (
RxFIFOThresholdHandler rxFIFOIntrHandler);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccRxFIFOIntDisable (
void)
*
* @brief Disables service request interrupt of the Rx FIFO.
*
* @param - None
*
* Global Data :
* - None.
*
* This API will disable the service request interrupt of the Rx FIFO.
*
* @return
* - IX_SSP_SUCCESS - Rx FIFO Interrupt disabled successfully
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccRxFIFOIntDisable (
void);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccTxFIFOIntEnable (
TxFIFOThresholdHandler txFIFOIntrHandler)
*
* @brief Enables service request interrupt of the Tx FIFO.
*
* @param "void [in] *txFIFOIntrHandler(UINT32)" - function pointer to the
* interrupt handler for the Tx FIFO exceeded.
*
* Global Data :
* - None.
*
* This API will enable the service request interrupt of the Tx FIFO.
*
* @return
* - IX_SSP_SUCCESS - Tx FIFO level interrupt enabled successfully
* - IX_SSP_TX_FIFO_HANDLER_MISSING - missing handler for Tx FIFO level interrupt
* - IX_SSP_POLL_MODE_BLOCKING - poll mode is selected at init, interrupt not
* allowed to be enabled. Use init to enable interrupt mode.
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccTxFIFOIntEnable (
TxFIFOThresholdHandler txFIFOIntrHandler);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccTxFIFOIntDisable (
void)
*
* @brief Disables service request interrupt of the Tx FIFO
*
* @param - None
*
* Global Data :
* - None.
*
* This API will disable the service request interrupt of the Tx FIFO
*
* @return
* - IX_SSP_SUCCESS - Tx FIFO Interrupt disabled successfuly.
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccTxFIFOIntDisable (
void);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccLoopbackEnable (
BOOL loopbackEnable)
*
* @brief Enables/disables the loopback mode
*
* @param "BOOL [in] loopbackEnable" - True to enable and false to disable.
*
* Global Data :
* - None.
*
* This API will set the mode of operation to either loopback or normal mode
* according to the user input.
*
* @return
* - IX_SSP_SUCCESS - Loopback enabled successfully
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccLoopbackEnable (
BOOL loopbackEnable);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccSpiSclkPolaritySet (
IxSspAccSpiSclkPolarity spiSclkPolaritySelected)
*
* @brief Sets the SPI SCLK Polarity to Low or High
*
* @param - "IxSspAccSpiSclkPolarity [in] spiSclkPolaritySelected" - SPI SCLK
* polarity that can be selected to either high or low
*
* Global Data :
* - None.
*
* This API is only used for the SPI frame format and will set the SPI SCLK polarity
* to either low or high
*
* @return
* - IX_SSP_SUCCESS - SPI Sclk polarity set with valid enum value
* - IX_SSP_INVALID_SPI_POLARITY_ENUM_VALUE - invalid SPI polarity value
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccSpiSclkPolaritySet (
IxSspAccSpiSclkPolarity spiSclkPolaritySelected);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccSpiSclkPhaseSet (
IxSspAccSpiSclkPhase spiSclkPhaseSelected)
*
* @brief Sets the SPI SCLK Phase
*
* @param "IxSspAccSpiSclkPhase [in] spiSclkPhaseSelected" - Phase of either
* the SCLK is inactive one cycle at the start of a frame and 1/2
* cycle at the end of a frame, OR
* the SCLK is inactive 1/2 cycle at the start of a frame and one
* cycle at the end of a frame.
*
* Global Data :
* - IX_SSP_SUCCESS - SPI Sclk phase set with valid enum value
* - IX_SSP_INVALID_SPI_PHASE_ENUM_VALUE - invalid SPI phase value
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* This API is only used for the SPI frame format and will set the SPI SCLK
* phase according to user input.
*
* @return
* - None
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccSpiSclkPhaseSet (
IxSspAccSpiSclkPhase spiSclkPhaseSelected);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccMicrowireControlWordSet (
IxSspAccMicrowireCtlWord microwireCtlWordSelected)
*
* @brief Sets the Microwire control word to 8 or 16 bit format
*
* @param "IxSspAccMicrowireCtlWord [in] microwireCtlWordSelected" - Microwire
* control word format can be either 8 or 16 bit format
*
* Global Data :
* - None.
*
* This API is only used for the Microwire frame format and will set the
* control word to 8 or 16 bit format
*
* @return
* - IX_SSP_SUCCESS - Microwire Control Word set with valid enum value
* - IX_SSP_TX_FIFO_NOT_EMPTY - Tx FIFO not empty, data size change is not
* allowed.
* - IX_SSP_INVALID_MICROWIRE_CTL_CMD_ENUM_VALUE - invalid enum value
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccMicrowireControlWordSet (
IxSspAccMicrowireCtlWord microwireCtlWordSelected);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccTxFIFOThresholdSet (
IxSspAccFifoThreshold txFIFOThresholdSelected)
*
* @brief Sets the Tx FIFO Threshold.
*
* @param "IxSspAccFifoThreshold [in] txFIFOThresholdSelected" - Threshold that
* is set for a Tx FIFO service request to be triggered
*
* Global Data :
* - None.
*
* This API will set the threshold for a Tx FIFO threshold to be triggered
*
* @return
* - IX_SSP_SUCCESS - Tx FIFO Threshold set with valid enum value
* - IX_SSP_INVALID_TX_FIFO_THRESHOLD_ENUM_VALUE - invalid enum value
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccTxFIFOThresholdSet (
IxSspAccFifoThreshold txFIFOThresholdSelected);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccRxFIFOThresholdSet (
IxSspAccFifoThreshold rxFIFOThresholdSelected)
*
* @brief Sets the Rx FIFO Threshold.
*
* @param "IxSspAccFifoThreshold [in] rxFIFOThresholdSelected" - Threshold that
* is set for a Tx FIFO service request to be triggered
*
* Global Data :
* - None.
*
* This API will will set the threshold for a Rx FIFO threshold to be triggered
*
* @return
* - IX_SSP_SUCCESS - Rx FIFO Threshold set with valid enum value
* - IX_SSP_INVALID_RX_FIFO_THRESHOLD_ENUM_VALUE - invalid enum value
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccRxFIFOThresholdSet (
IxSspAccFifoThreshold rxFIFOThresholdSelected);
/**
* Debug functions
*/
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccStatsGet (
IxSspAccStatsCounters *sspStats)
*
* @brief Returns the SSP Statistics through the pointer passed in
*
* @param "IxSspAccStatsCounters [in] *sspStats" - SSP statistics counter will
* be read and written to the location pointed by this pointer.
*
* Global Data :
* - None.
*
* This API will return the statistics counters of the SSP transfers.
*
* @return
* - IX_SSP_SUCCESS - Stats obtained into the pointer provided successfully
* - IX_SSP_FAIL - client provided pointer is NULL
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccStatsGet (
IxSspAccStatsCounters *sspStats);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccStatsReset (
void)
*
* @brief Resets the SSP Statistics
*
* @param - None
*
* Global Data :
* - None.
*
* This API will reset the SSP statistics counters.
*
* @return
* - None
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC void
ixSspAccStatsReset (
void);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccShow (
void)
*
* @brief Display SSP status registers and statistics counters.
*
* @param - None
*
* Global Data :
* - None.
*
* This API will display the status registers of the SSP and the statistics
* counters.
*
* @return
* - IX_SSP_SUCCESS - SSP show called successfully.
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccShow (
void);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccSSPBusyCheck (
void)
*
* @brief Determine the state of the SSP serial port hardware.
*
* @param - None
*
* Global Data :
* - None.
*
* This API will return the state of the SSP serial port hardware - busy or
* idle
*
* @return
* - IX_SSP_BUSY - SSP is busy
* - IX_SSP_IDLE - SSP is idle.
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccSSPBusyCheck (
void);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccTxFIFOLevelGet (
void)
*
* @brief Obtain the Tx FIFO's level
*
* @param - None
*
* Global Data :
* - None.
*
* This API will return the level of the Tx FIFO
*
* @return
* - 0..16; 0 can also mean SSP not initialized and will need to be init.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC UINT8
ixSspAccTxFIFOLevelGet (
void);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccRxFIFOLevelGet (
void)
*
* @brief Obtain the Rx FIFO's level
*
* @param - None
*
* Global Data :
* - None.
*
* This API will return the level of the Rx FIFO
*
* @return
* - 0..16; 0 can also mean SSP not initialized and will need to be init.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC UINT8
ixSspAccRxFIFOLevelGet (
void);
/**
* @ingroup IxSspAcc
*
* @fn ixSspAccRxFIFOOverrunCheck (
void)
*
* @brief Check if the Rx FIFO has overrun its FIFOs
*
* @param - None
*
* Global Data :
* - None.
*
* This API will return whether the Rx FIFO has overrun its 16 FIFOs
*
* @return
* - IX_SSP_OVERRUN_OCCURRED - Rx FIFO overrun occurred
* - IX_SSP_NO_OVERRUN - Rx FIFO did not overrun
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_SSP_STATUS
ixSspAccRxFIFOOverrunCheck (
void);
#endif /* __ixp46X */
#endif /* IXSSPACC_H */