Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-21 02:33:07 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/powerpc/cpu/mpc85xx/cpu_init.c
Tom Rini 6e7df1d151 global: Finish CONFIG -> CFG migration 
At this point, the remaining places where we have a symbol that is
defined as CONFIG_... are in fairly odd locations. While as much dead
code has been removed as possible, some of these locations are simply
less obvious at first. In other cases, this code is used, but was
defined in such a way as to have been missed by earlier checks.  Perform
a rename of all such remaining symbols to be CFG_... rather than
CONFIG_...

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-20 12:27:24 -05:00

1000 lines
25 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2007-2011 Freescale Semiconductor, Inc.
*
* (C) Copyright 2003 Motorola Inc.
* Modified by Xianghua Xiao, X.Xiao@motorola.com
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*/
#include <common.h>
#include <display_options.h>
#include <env.h>
#include <init.h>
#include <net.h>
#include <watchdog.h>
#include <asm/processor.h>
#include <ioports.h>
#include <sata.h>
#include <fm_eth.h>
#include <asm/io.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#include <fsl_errata.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_srio.h>
#ifdef CONFIG_FSL_CORENET
#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fsl_qbman.h>
#endif
#include <fsl_usb.h>
#include <hwconfig.h>
#include <linux/compiler.h>
#include <linux/delay.h>
#include "mp.h"
#ifdef CONFIG_CHAIN_OF_TRUST
#include <fsl_validate.h>
#endif
#ifdef CONFIG_FSL_CAAM
#include <fsl_sec.h>
#endif
#if defined(CONFIG_NXP_ESBC) && defined(CONFIG_FSL_CORENET)
#include <asm/fsl_pamu.h>
#include <fsl_secboot_err.h>
#endif
#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
#include <nand.h>
#include <errno.h>
#endif
#ifndef CONFIG_ARCH_QEMU_E500
#include <fsl_ddr.h>
#endif
#include "../../../../drivers/ata/fsl_sata.h"
#ifdef CONFIG_U_QE
#include <fsl_qe.h>
#endif
#include <dm.h>
#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
/*
* For deriving usb clock from 100MHz sysclk, reference divisor is set
* to a value of 5, which gives an intermediate value 20(100/5). The
* multiplication factor integer is set to 24, which when multiplied to
* above intermediate value provides clock for usb ip.
*/
void usb_single_source_clk_configure(struct ccsr_usb_phy *usb_phy)
{
sys_info_t sysinfo;
get_sys_info(&sysinfo);
if (sysinfo.diff_sysclk == 1) {
clrbits_be32(&usb_phy->pllprg[1],
CFG_SYS_FSL_USB_PLLPRG2_MFI);
setbits_be32(&usb_phy->pllprg[1],
CFG_SYS_FSL_USB_PLLPRG2_REF_DIV_INTERNAL_CLK |
CFG_SYS_FSL_USB_PLLPRG2_MFI_INTERNAL_CLK |
CFG_SYS_FSL_USB_INTERNAL_SOC_CLK_EN);
}
}
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
void fsl_erratum_a006261_workaround(struct ccsr_usb_phy __iomem *usb_phy)
{
#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
u32 xcvrprg = in_be32(&usb_phy->port1.xcvrprg);
/* Increase Disconnect Threshold by 50mV */
xcvrprg &= ~CFG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK |
INC_DCNT_THRESHOLD_50MV;
/* Enable programming of USB High speed Disconnect threshold */
xcvrprg |= CFG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN;
out_be32(&usb_phy->port1.xcvrprg, xcvrprg);
xcvrprg = in_be32(&usb_phy->port2.xcvrprg);
/* Increase Disconnect Threshold by 50mV */
xcvrprg &= ~CFG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK |
INC_DCNT_THRESHOLD_50MV;
/* Enable programming of USB High speed Disconnect threshold */
xcvrprg |= CFG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN;
out_be32(&usb_phy->port2.xcvrprg, xcvrprg);
#else
u32 temp = 0;
u32 status = in_be32(&usb_phy->status1);
u32 squelch_prog_rd_0_2 =
(status >> CFG_SYS_FSL_USB_SQUELCH_PROG_RD_0)
& CFG_SYS_FSL_USB_SQUELCH_PROG_MASK;
u32 squelch_prog_rd_3_5 =
(status >> CFG_SYS_FSL_USB_SQUELCH_PROG_RD_3)
& CFG_SYS_FSL_USB_SQUELCH_PROG_MASK;
setbits_be32(&usb_phy->config1,
CFG_SYS_FSL_USB_HS_DISCNCT_INC);
setbits_be32(&usb_phy->config2,
CFG_SYS_FSL_USB_RX_AUTO_CAL_RD_WR_SEL);
temp = squelch_prog_rd_0_2 << CFG_SYS_FSL_USB_SQUELCH_PROG_WR_3;
out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
temp = squelch_prog_rd_3_5 << CFG_SYS_FSL_USB_SQUELCH_PROG_WR_0;
out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
#endif
}
#endif
#if defined(CONFIG_QE) && !defined(CONFIG_U_QE)
extern qe_iop_conf_t qe_iop_conf_tab[];
extern void qe_config_iopin(u8 port, u8 pin, int dir,
int open_drain, int assign);
extern void qe_init(uint qe_base);
extern void qe_reset(void);
static void config_qe_ioports(void)
{
u8 port, pin;
int dir, open_drain, assign;
int i;
for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
port = qe_iop_conf_tab[i].port;
pin = qe_iop_conf_tab[i].pin;
dir = qe_iop_conf_tab[i].dir;
open_drain = qe_iop_conf_tab[i].open_drain;
assign = qe_iop_conf_tab[i].assign;
qe_config_iopin(port, pin, dir, open_drain, assign);
}
}
#endif
#ifdef CONFIG_SYS_FSL_CPC
#if defined(CONFIG_RAMBOOT_PBL) || defined(CONFIG_SYS_CPC_REINIT_F)
void disable_cpc_sram(void)
{
int i;
cpc_corenet_t *cpc = (cpc_corenet_t *)CFG_SYS_FSL_CPC_ADDR;
for (i = 0; i < CFG_SYS_NUM_CPC; i++, cpc++) {
if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) {
/* find and disable LAW of SRAM */
struct law_entry law = find_law(CFG_SYS_INIT_L3_ADDR);
if (law.index == -1) {
printf("\nFatal error happened\n");
return;
}
disable_law(law.index);
clrbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_CDQ_SPEC_DIS);
out_be32(&cpc->cpccsr0, 0);
out_be32(&cpc->cpcsrcr0, 0);
}
}
}
#endif
#if defined(T1040_TDM_QUIRK_CCSR_BASE)
#ifdef CONFIG_POST
#error POST memory test cannot be enabled with TDM
#endif
static void enable_tdm_law(void)
{
int ret;
char buffer[HWCONFIG_BUFFER_SIZE] = {0};
int tdm_hwconfig_enabled = 0;
/*
* Extract hwconfig from environment since environment
* is not setup properly yet. Search for tdm entry in
* hwconfig.
*/
ret = env_get_f("hwconfig", buffer, sizeof(buffer));
if (ret > 0) {
tdm_hwconfig_enabled = hwconfig_f("tdm", buffer);
/* If tdm is defined in hwconfig, set law for tdm workaround */
if (tdm_hwconfig_enabled)
set_next_law(T1040_TDM_QUIRK_CCSR_BASE, LAW_SIZE_16M,
LAW_TRGT_IF_CCSR);
}
}
#endif
void enable_cpc(void)
{
int i;
int ret;
u32 size = 0;
u32 cpccfg0;
char buffer[HWCONFIG_BUFFER_SIZE];
char cpc_subarg[16];
bool have_hwconfig = false;
int cpc_args = 0;
cpc_corenet_t *cpc = (cpc_corenet_t *)CFG_SYS_FSL_CPC_ADDR;
/* Extract hwconfig from environment */
ret = env_get_f("hwconfig", buffer, sizeof(buffer));
if (ret > 0) {
/*
* If "en_cpc" is not defined in hwconfig then by default all
* cpcs are enable. If this config is defined then individual
* cpcs which have to be enabled should also be defined.
* e.g en_cpc:cpc1,cpc2;
*/
if (hwconfig_f("en_cpc", buffer))
have_hwconfig = true;
}
for (i = 0; i < CFG_SYS_NUM_CPC; i++, cpc++) {
if (have_hwconfig) {
sprintf(cpc_subarg, "cpc%u", i + 1);
cpc_args = hwconfig_sub_f("en_cpc", cpc_subarg, buffer);
if (cpc_args == 0)
continue;
}
cpccfg0 = in_be32(&cpc->cpccfg0);
size += CPC_CFG0_SZ_K(cpccfg0);
#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS);
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_DATA_ECC_SCRUB_DIS);
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A006593
setbits_be32(&cpc->cpchdbcr0, 1 << (31 - 21));
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A006379
if (has_erratum_a006379()) {
setbits_be32(&cpc->cpchdbcr0,
CPC_HDBCR0_SPLRU_LEVEL_EN);
}
#endif
out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE);
/* Read back to sync write */
in_be32(&cpc->cpccsr0);
}
puts("Corenet Platform Cache: ");
print_size(size * 1024, " enabled\n");
}
static void invalidate_cpc(void)
{
int i;
cpc_corenet_t *cpc = (cpc_corenet_t *)CFG_SYS_FSL_CPC_ADDR;
for (i = 0; i < CFG_SYS_NUM_CPC; i++, cpc++) {
/* skip CPC when it used as all SRAM */
if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN)
continue;
/* Flash invalidate the CPC and clear all the locks */
out_be32(&cpc->cpccsr0, CPC_CSR0_FI | CPC_CSR0_LFC);
while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI | CPC_CSR0_LFC))
;
}
}
#else
#define enable_cpc()
#define invalidate_cpc()
#define disable_cpc_sram()
#endif /* CONFIG_SYS_FSL_CPC */
/*
* Breathe some life into the CPU...
*
* Set up the memory map
* initialize a bunch of registers
*/
#ifdef CONFIG_FSL_CORENET
static void corenet_tb_init(void)
{
volatile ccsr_rcpm_t *rcpm =
(void *)(CFG_SYS_FSL_CORENET_RCPM_ADDR);
volatile ccsr_pic_t *pic =
(void *)(CFG_SYS_MPC8xxx_PIC_ADDR);
u32 whoami = in_be32(&pic->whoami);
/* Enable the timebase register for this core */
out_be32(&rcpm->ctbenrl, (1 << whoami));
}
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A007212
void fsl_erratum_a007212_workaround(void)
{
ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
u32 ddr_pll_ratio;
u32 __iomem *plldgdcr1 = (void *)(CFG_SYS_DCSRBAR + 0x21c20);
u32 __iomem *plldadcr1 = (void *)(CFG_SYS_DCSRBAR + 0x21c28);
u32 __iomem *dpdovrcr4 = (void *)(CFG_SYS_DCSRBAR + 0x21e80);
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
u32 __iomem *plldgdcr2 = (void *)(CFG_SYS_DCSRBAR + 0x21c40);
u32 __iomem *plldadcr2 = (void *)(CFG_SYS_DCSRBAR + 0x21c48);
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
u32 __iomem *plldgdcr3 = (void *)(CFG_SYS_DCSRBAR + 0x21c60);
u32 __iomem *plldadcr3 = (void *)(CFG_SYS_DCSRBAR + 0x21c68);
#endif
#endif
/*
* Even this workaround applies to selected version of SoCs, it is
* safe to apply to all versions, with the limitation of odd ratios.
* If RCW has disabled DDR PLL, we have to apply this workaround,
* otherwise DDR will not work.
*/
ddr_pll_ratio = (in_be32(&gur->rcwsr[0]) >>
FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT) &
FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
/* check if RCW sets ratio to 0, required by this workaround */
if (ddr_pll_ratio != 0)
return;
ddr_pll_ratio = (in_be32(&gur->rcwsr[0]) >>
FSL_CORENET_RCWSR0_MEM_PLL_RAT_RESV_SHIFT) &
FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
/* check if reserved bits have the desired ratio */
if (ddr_pll_ratio == 0) {
printf("Error: Unknown DDR PLL ratio!\n");
return;
}
ddr_pll_ratio >>= 1;
setbits_be32(plldadcr1, 0x02000001);
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
setbits_be32(plldadcr2, 0x02000001);
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
setbits_be32(plldadcr3, 0x02000001);
#endif
#endif
setbits_be32(dpdovrcr4, 0xe0000000);
out_be32(plldgdcr1, 0x08000001 | (ddr_pll_ratio << 1));
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
out_be32(plldgdcr2, 0x08000001 | (ddr_pll_ratio << 1));
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
out_be32(plldgdcr3, 0x08000001 | (ddr_pll_ratio << 1));
#endif
#endif
udelay(100);
clrbits_be32(plldadcr1, 0x02000001);
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
clrbits_be32(plldadcr2, 0x02000001);
#if (CONFIG_SYS_NUM_DDR_CTLRS >= 3)
clrbits_be32(plldadcr3, 0x02000001);
#endif
#endif
clrbits_be32(dpdovrcr4, 0xe0000000);
}
#endif
ulong cpu_init_f(void)
{
extern void m8560_cpm_reset (void);
#ifdef CFG_SYS_DCSRBAR_PHYS
ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
#endif
#if defined(CONFIG_NXP_ESBC) && !defined(CONFIG_SYS_RAMBOOT)
struct law_entry law;
#endif
#ifdef CONFIG_ARCH_MPC8548
ccsr_local_ecm_t *ecm = (void *)(CFG_SYS_MPC85xx_ECM_ADDR);
uint svr = get_svr();
/*
* CPU2 errata workaround: A core hang possible while executing
* a msync instruction and a snoopable transaction from an I/O
* master tagged to make quick forward progress is present.
* Fixed in silicon rev 2.1.
*/
if ((SVR_MAJ(svr) == 1) || ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0)))
out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) | (1 << 16));
#endif
disable_tlb(14);
disable_tlb(15);
#if defined(CONFIG_NXP_ESBC) && !defined(CONFIG_SYS_RAMBOOT)
/* Disable the LAW created for NOR flash by the PBI commands */
law = find_law(CFG_SYS_PBI_FLASH_BASE);
if (law.index != -1)
disable_law(law.index);
#if defined(CONFIG_SYS_CPC_REINIT_F)
disable_cpc_sram();
#endif
#endif
init_early_memctl_regs();
#if defined(CONFIG_QE) && !defined(CONFIG_U_QE)
/* Config QE ioports */
config_qe_ioports();
#endif
#if defined(CONFIG_FSL_DMA)
dma_init();
#endif
#ifdef CONFIG_FSL_CORENET
corenet_tb_init();
#endif
init_used_tlb_cams();
/* Invalidate the CPC before DDR gets enabled */
invalidate_cpc();
#ifdef CFG_SYS_DCSRBAR_PHYS
/* set DCSRCR so that DCSR space is 1G */
setbits_be32(&gur->dcsrcr, FSL_CORENET_DCSR_SZ_1G);
in_be32(&gur->dcsrcr);
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A007212
fsl_erratum_a007212_workaround();
#endif
return 0;
}
/* Implement a dummy function for those platforms w/o SERDES */
static void __fsl_serdes__init(void)
{
return;
}
__attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
int enable_cluster_l2(void)
{
int i = 0;
u32 cluster, svr = get_svr();
ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
struct ccsr_cluster_l2 __iomem *l2cache;
/* only the L2 of first cluster should be enabled as expected on T4080,
* but there is no EOC in the first cluster as HW sake, so return here
* to skip enabling L2 cache of the 2nd cluster.
*/
if (SVR_SOC_VER(svr) == SVR_T4080)
return 0;
cluster = in_be32(&gur->tp_cluster[i].lower);
if (cluster & TP_CLUSTER_EOC)
return 0;
/* The first cache has already been set up, so skip it */
i++;
/* Look through the remaining clusters, and set up their caches */
do {
int j, cluster_valid = 0;
l2cache = (void __iomem *)(CFG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000);
cluster = in_be32(&gur->tp_cluster[i].lower);
/* check that at least one core/accel is enabled in cluster */
for (j = 0; j < 4; j++) {
u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK;
u32 type = in_be32(&gur->tp_ityp[idx]);
if ((type & TP_ITYP_AV) &&
TP_ITYP_TYPE(type) == TP_ITYP_TYPE_PPC)
cluster_valid = 1;
}
if (cluster_valid) {
/* set stash ID to (cluster) * 2 + 32 + 1 */
clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
printf("enable l2 for cluster %d %p\n", i, l2cache);
out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
while ((in_be32(&l2cache->l2csr0)
& (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
;
out_be32(&l2cache->l2csr0, L2CSR0_L2E|L2CSR0_L2PE|L2CSR0_L2REP_MODE);
}
i++;
} while (!(cluster & TP_CLUSTER_EOC));
return 0;
}
#endif
/*
* Initialize L2 as cache.
*/
int l2cache_init(void)
{
__maybe_unused u32 svr = get_svr();
#ifdef CONFIG_L2_CACHE
ccsr_l2cache_t *l2cache = (void __iomem *)CFG_SYS_MPC85xx_L2_ADDR;
#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
struct ccsr_cluster_l2 * l2cache = (void __iomem *)CFG_SYS_FSL_CLUSTER_1_L2;
#endif
puts ("L2: ");
#if defined(CONFIG_L2_CACHE)
volatile uint cache_ctl;
uint ver;
u32 l2siz_field;
ver = SVR_SOC_VER(svr);
asm("msync;isync");
cache_ctl = l2cache->l2ctl;
#if defined(CONFIG_SYS_RAMBOOT) && defined(CFG_SYS_INIT_L2_ADDR)
if (cache_ctl & MPC85xx_L2CTL_L2E) {
/* Clear L2 SRAM memory-mapped base address */
out_be32(&l2cache->l2srbar0, 0x0);
out_be32(&l2cache->l2srbar1, 0x0);
/* set MBECCDIS=0, SBECCDIS=0 */
clrbits_be32(&l2cache->l2errdis,
(MPC85xx_L2ERRDIS_MBECC |
MPC85xx_L2ERRDIS_SBECC));
/* set L2E=0, L2SRAM=0 */
clrbits_be32(&l2cache->l2ctl,
(MPC85xx_L2CTL_L2E |
MPC85xx_L2CTL_L2SRAM_ENTIRE));
}
#endif
l2siz_field = (cache_ctl >> 28) & 0x3;
switch (l2siz_field) {
case 0x0:
printf(" unknown size (0x%08x)\n", cache_ctl);
return -1;
break;
case 0x1:
if (ver == SVR_8540 || ver == SVR_8560 ||
ver == SVR_8541 || ver == SVR_8555) {
puts("128 KiB ");
/* set L2E=1, L2I=1, & L2BLKSZ=1 (128 KiBibyte) */
cache_ctl = 0xc4000000;
} else {
puts("256 KiB ");
cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
}
break;
case 0x2:
if (ver == SVR_8540 || ver == SVR_8560 ||
ver == SVR_8541 || ver == SVR_8555) {
puts("256 KiB ");
/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 KiBibyte) */
cache_ctl = 0xc8000000;
} else {
puts("512 KiB ");
/* set L2E=1, L2I=1, & L2SRAM=0 */
cache_ctl = 0xc0000000;
}
break;
case 0x3:
puts("1024 KiB ");
/* set L2E=1, L2I=1, & L2SRAM=0 */
cache_ctl = 0xc0000000;
break;
}
if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
puts("already enabled");
#if defined(CFG_SYS_INIT_L2_ADDR) && defined(CFG_SYS_FLASH_BASE)
u32 l2srbar = l2cache->l2srbar0;
if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
&& l2srbar >= CFG_SYS_FLASH_BASE) {
l2srbar = CFG_SYS_INIT_L2_ADDR;
l2cache->l2srbar0 = l2srbar;
printf(", moving to 0x%08x", CFG_SYS_INIT_L2_ADDR);
}
#endif /* CFG_SYS_INIT_L2_ADDR */
puts("\n");
} else {
asm("msync;isync");
l2cache->l2ctl = cache_ctl; /* invalidate & enable */
asm("msync;isync");
puts("enabled\n");
}
#elif defined(CONFIG_BACKSIDE_L2_CACHE)
if (SVR_SOC_VER(svr) == SVR_P2040) {
puts("N/A\n");
goto skip_l2;
}
u32 l2cfg0 = mfspr(SPRN_L2CFG0);
/* invalidate the L2 cache */
mtspr(SPRN_L2CSR0, (L2CSR0_L2FI|L2CSR0_L2LFC));
while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI|L2CSR0_L2LFC))
;
#ifdef CONFIG_SYS_CACHE_STASHING
/* set stash id to (coreID) * 2 + 32 + L2 (1) */
mtspr(SPRN_L2CSR1, (32 + 1));
#endif
/* enable the cache */
mtspr(SPRN_L2CSR0, CFG_SYS_INIT_L2CSR0);
if (CFG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
;
print_size((l2cfg0 & 0x3fff) * 64 * 1024, " enabled\n");
}
skip_l2:
#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
if (l2cache->l2csr0 & L2CSR0_L2E)
print_size((l2cache->l2cfg0 & 0x3fff) * 64 * 1024,
" enabled\n");
enable_cluster_l2();
#else
puts("disabled\n");
#endif
return 0;
}
/*
*
* The newer 8548, etc, parts have twice as much cache, but
* use the same bit-encoding as the older 8555, etc, parts.
*
*/
int cpu_init_r(void)
{
__maybe_unused u32 svr = get_svr();
#ifdef CFG_SYS_LBC_LCRR
fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR;
#endif
#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
extern int spin_table_compat;
const char *spin;
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
ccsr_sec_t __iomem *sec = (void *)CFG_SYS_FSL_SEC_ADDR;
#endif
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
/*
* CPU22 and NMG_CPU_A011 share the same workaround.
* CPU22 applies to P4080 rev 1.0, 2.0, fixed in 3.0
* NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0
* also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1, both
* fixed in 2.0. NMG_CPU_A011 is activated by default and can
* be disabled by hwconfig with syntax:
*
* fsl_cpu_a011:disable
*/
extern int enable_cpu_a011_workaround;
#ifdef CONFIG_SYS_P4080_ERRATUM_CPU22
enable_cpu_a011_workaround = (SVR_MAJ(svr) < 3);
#else
char buffer[HWCONFIG_BUFFER_SIZE];
char *buf = NULL;
int n, res;
n = env_get_f("hwconfig", buffer, sizeof(buffer));
if (n > 0)
buf = buffer;
res = hwconfig_arg_cmp_f("fsl_cpu_a011", "disable", buf);
if (res > 0) {
enable_cpu_a011_workaround = 0;
} else {
if (n >= HWCONFIG_BUFFER_SIZE) {
printf("fsl_cpu_a011 was not found. hwconfig variable "
"may be too long\n");
}
enable_cpu_a011_workaround =
(SVR_SOC_VER(svr) == SVR_P4080 && SVR_MAJ(svr) < 3) ||
(SVR_SOC_VER(svr) != SVR_P4080 && SVR_MAJ(svr) < 2);
}
#endif
if (enable_cpu_a011_workaround) {
flush_dcache();
mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS));
sync();
}
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A007907
flush_dcache();
mtspr(L1CSR2, (mfspr(L1CSR2) & ~L1CSR2_DCSTASHID));
sync();
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A005812
/*
* A-005812 workaround sets bit 32 of SPR 976 for SoCs running
* in write shadow mode. Checking DCWS before setting SPR 976.
*/
if (mfspr(L1CSR2) & L1CSR2_DCWS)
mtspr(SPRN_HDBCR0, (mfspr(SPRN_HDBCR0) | 0x80000000));
#endif
#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
spin = env_get("spin_table_compat");
if (spin && (*spin == 'n'))
spin_table_compat = 0;
else
spin_table_compat = 1;
#endif
#ifdef CONFIG_FSL_CORENET
set_liodns();
#ifdef CONFIG_SYS_DPAA_QBMAN
setup_qbman_portals();
#endif
#endif
l2cache_init();
#if defined(CONFIG_RAMBOOT_PBL)
disable_cpc_sram();
#endif
enable_cpc();
#if defined(T1040_TDM_QUIRK_CCSR_BASE)
enable_tdm_law();
#endif
#ifndef CONFIG_SYS_FSL_NO_SERDES
/* needs to be in ram since code uses global static vars */
fsl_serdes_init();
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
#define MCFGR_AXIPIPE 0x000000f0
if (IS_SVR_REV(svr, 1, 0))
sec_clrbits32(&sec->mcfgr, MCFGR_AXIPIPE);
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A005871
if (IS_SVR_REV(svr, 1, 0)) {
int i;
__be32 *p = (void __iomem *)CFG_SYS_DCSRBAR + 0xb004c;
for (i = 0; i < 12; i++) {
p += i + (i > 5 ? 11 : 0);
out_be32(p, 0x2);
}
p = (void __iomem *)CFG_SYS_DCSRBAR + 0xb0108;
out_be32(p, 0x34);
}
#endif
#ifdef CONFIG_SYS_SRIO
srio_init();
#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
char *s = env_get("bootmaster");
if (s) {
if (!strcmp(s, "SRIO1")) {
srio_boot_master(1);
srio_boot_master_release_slave(1);
}
if (!strcmp(s, "SRIO2")) {
srio_boot_master(2);
srio_boot_master_release_slave(2);
}
}
#endif
#endif
#if defined(CONFIG_MP)
setup_mp();
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC13
{
if (SVR_MAJ(svr) < 3) {
void *p;
p = (void *)CFG_SYS_DCSRBAR + 0x20520;
setbits_be32(p, 1 << (31 - 14));
}
}
#endif
#ifdef CFG_SYS_LBC_LCRR
/*
* Modify the CLKDIV field of LCRR register to improve the writing
* speed for NOR flash.
*/
clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CFG_SYS_LBC_LCRR);
__raw_readl(&lbc->lcrr);
isync();
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
udelay(100);
#endif
#endif
#ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE
{
struct ccsr_usb_phy __iomem *usb_phy1 =
(void *)CFG_SYS_MPC85xx_USB1_PHY_ADDR;
#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
if (has_erratum_a006261())
fsl_erratum_a006261_workaround(usb_phy1);
#endif
out_be32(&usb_phy1->usb_enable_override,
CFG_SYS_FSL_USB_ENABLE_OVERRIDE);
}
#endif
#ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE
{
struct ccsr_usb_phy __iomem *usb_phy2 =
(void *)CFG_SYS_MPC85xx_USB2_PHY_ADDR;
#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
if (has_erratum_a006261())
fsl_erratum_a006261_workaround(usb_phy2);
#endif
out_be32(&usb_phy2->usb_enable_override,
CFG_SYS_FSL_USB_ENABLE_OVERRIDE);
}
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_USB14
/* On P204x/P304x/P50x0 Rev1.0, USB transmit will result internal
* multi-bit ECC errors which has impact on performance, so software
* should disable all ECC reporting from USB1 and USB2.
*/
if (IS_SVR_REV(get_svr(), 1, 0)) {
struct dcsr_dcfg_regs *dcfg = (struct dcsr_dcfg_regs *)
(CFG_SYS_DCSRBAR + CFG_SYS_DCSR_DCFG_OFFSET);
setbits_be32(&dcfg->ecccr1,
(DCSR_DCFG_ECC_DISABLE_USB1 |
DCSR_DCFG_ECC_DISABLE_USB2));
}
#endif
#if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE)
struct ccsr_usb_phy __iomem *usb_phy =
(void *)CFG_SYS_MPC85xx_USB1_PHY_ADDR;
setbits_be32(&usb_phy->pllprg[1],
CFG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN |
CFG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN |
CFG_SYS_FSL_USB_PLLPRG2_MFI |
CFG_SYS_FSL_USB_PLLPRG2_PLL_EN);
#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
usb_single_source_clk_configure(usb_phy);
#endif
setbits_be32(&usb_phy->port1.ctrl,
CFG_SYS_FSL_USB_CTRL_PHY_EN);
setbits_be32(&usb_phy->port1.drvvbuscfg,
CFG_SYS_FSL_USB_DRVVBUS_CR_EN);
setbits_be32(&usb_phy->port1.pwrfltcfg,
CFG_SYS_FSL_USB_PWRFLT_CR_EN);
setbits_be32(&usb_phy->port2.ctrl,
CFG_SYS_FSL_USB_CTRL_PHY_EN);
setbits_be32(&usb_phy->port2.drvvbuscfg,
CFG_SYS_FSL_USB_DRVVBUS_CR_EN);
setbits_be32(&usb_phy->port2.pwrfltcfg,
CFG_SYS_FSL_USB_PWRFLT_CR_EN);
#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
if (has_erratum_a006261())
fsl_erratum_a006261_workaround(usb_phy);
#endif
#endif /* CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE */
#ifdef CONFIG_SYS_FSL_ERRATUM_A009942
erratum_a009942_check_cpo();
#endif
#ifdef CONFIG_FMAN_ENET
#ifndef CONFIG_DM_ETH
fman_enet_init();
#endif
#endif
#if defined(CONFIG_NXP_ESBC) && defined(CONFIG_FSL_CORENET)
if (pamu_init() < 0)
fsl_secboot_handle_error(ERROR_ESBC_PAMU_INIT);
#endif
#ifdef CONFIG_FSL_CAAM
#if defined(CONFIG_ARCH_C29X)
if ((SVR_SOC_VER(svr) == SVR_C292) ||
(SVR_SOC_VER(svr) == SVR_C293))
sec_init_idx(1);
if (SVR_SOC_VER(svr) == SVR_C293)
sec_init_idx(2);
#endif
#endif
#if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_SYS_FSL_ERRATUM_SATA_A001)
/*
* For P1022/1013 Rev1.0 silicon, after power on SATA host
* controller is configured in legacy mode instead of the
* expected enterprise mode. Software needs to clear bit[28]
* of HControl register to change to enterprise mode from
* legacy mode. We assume that the controller is offline.
*/
if (IS_SVR_REV(svr, 1, 0) &&
((SVR_SOC_VER(svr) == SVR_P1022) ||
(SVR_SOC_VER(svr) == SVR_P1013))) {
fsl_sata_reg_t *reg;
/* first SATA controller */
reg = (void *)CFG_SYS_MPC85xx_SATA1_ADDR;
clrbits_le32(&reg->hcontrol, HCONTROL_ENTERPRISE_EN);
/* second SATA controller */
reg = (void *)CFG_SYS_MPC85xx_SATA2_ADDR;
clrbits_le32(&reg->hcontrol, HCONTROL_ENTERPRISE_EN);
}
#endif
init_used_tlb_cams();
return 0;
}
#ifdef CONFIG_ARCH_MISC_INIT
int arch_misc_init(void)
{
if (IS_ENABLED(CONFIG_FSL_CAAM)) {
struct udevice *dev;
int ret;
ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
if (ret)
printf("Failed to initialize caam_jr: %d\n", ret);
}
return 0;
}
#endif
void arch_preboot_os(void)
{
u32 msr;
/*
* We are changing interrupt offsets and are about to boot the OS so
* we need to make sure we disable all async interrupts. EE is already
* disabled by the time we get called.
*/
msr = mfmsr();
msr &= ~(MSR_ME|MSR_CE);
mtmsr(msr);
}
int cpu_secondary_init_r(void)
{
#ifdef CONFIG_QE
#ifdef CONFIG_U_QE
uint qe_base = CONFIG_SYS_IMMR + 0x00140000; /* QE immr base */
#else
uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
#endif
qe_init(qe_base);
qe_reset();
#endif
return 0;
}
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
#ifdef CONFIG_CHAIN_OF_TRUST
fsl_setenv_chain_of_trust();
#endif
return 0;
}
#endif
Reference in a new issue View git blame Copy permalink