mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 23:33:00 +00:00
ab761ce9f9
As the handling for carriage return and line feed is done in the common DM driver serial-uclass.c, such handling in some serial DM drivers is duplicated and need to be removed. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
347 lines
7.8 KiB
C
347 lines
7.8 KiB
C
/*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <watchdog.h>
|
|
#include <asm/io.h>
|
|
#include <serial.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/clock.h>
|
|
|
|
#define US1_TDRE (1 << 7)
|
|
#define US1_RDRF (1 << 5)
|
|
#define US1_OR (1 << 3)
|
|
#define UC2_TE (1 << 3)
|
|
#define UC2_RE (1 << 2)
|
|
#define CFIFO_TXFLUSH (1 << 7)
|
|
#define CFIFO_RXFLUSH (1 << 6)
|
|
#define SFIFO_RXOF (1 << 2)
|
|
#define SFIFO_RXUF (1 << 0)
|
|
|
|
#define STAT_LBKDIF (1 << 31)
|
|
#define STAT_RXEDGIF (1 << 30)
|
|
#define STAT_TDRE (1 << 23)
|
|
#define STAT_RDRF (1 << 21)
|
|
#define STAT_IDLE (1 << 20)
|
|
#define STAT_OR (1 << 19)
|
|
#define STAT_NF (1 << 18)
|
|
#define STAT_FE (1 << 17)
|
|
#define STAT_PF (1 << 16)
|
|
#define STAT_MA1F (1 << 15)
|
|
#define STAT_MA2F (1 << 14)
|
|
#define STAT_FLAGS (STAT_LBKDIF | STAT_RXEDGIF | STAT_IDLE | STAT_OR | \
|
|
STAT_NF | STAT_FE | STAT_PF | STAT_MA1F | STAT_MA2F)
|
|
|
|
#define CTRL_TE (1 << 19)
|
|
#define CTRL_RE (1 << 18)
|
|
|
|
#define FIFO_TXFE 0x80
|
|
#define FIFO_RXFE 0x40
|
|
|
|
#define WATER_TXWATER_OFF 1
|
|
#define WATER_RXWATER_OFF 16
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct lpuart_serial_platdata {
|
|
struct lpuart_fsl *reg;
|
|
};
|
|
|
|
#ifndef CONFIG_LPUART_32B_REG
|
|
static void _lpuart_serial_setbrg(struct lpuart_fsl *base, int baudrate)
|
|
{
|
|
u32 clk = mxc_get_clock(MXC_UART_CLK);
|
|
u16 sbr;
|
|
|
|
sbr = (u16)(clk / (16 * baudrate));
|
|
|
|
/* place adjustment later - n/32 BRFA */
|
|
__raw_writeb(sbr >> 8, &base->ubdh);
|
|
__raw_writeb(sbr & 0xff, &base->ubdl);
|
|
}
|
|
|
|
static int _lpuart_serial_getc(struct lpuart_fsl *base)
|
|
{
|
|
while (!(__raw_readb(&base->us1) & (US1_RDRF | US1_OR)))
|
|
WATCHDOG_RESET();
|
|
|
|
barrier();
|
|
|
|
return __raw_readb(&base->ud);
|
|
}
|
|
|
|
static void _lpuart_serial_putc(struct lpuart_fsl *base, const char c)
|
|
{
|
|
while (!(__raw_readb(&base->us1) & US1_TDRE))
|
|
WATCHDOG_RESET();
|
|
|
|
__raw_writeb(c, &base->ud);
|
|
}
|
|
|
|
/* Test whether a character is in the RX buffer */
|
|
static int _lpuart_serial_tstc(struct lpuart_fsl *base)
|
|
{
|
|
if (__raw_readb(&base->urcfifo) == 0)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Initialise the serial port with the given baudrate. The settings
|
|
* are always 8 data bits, no parity, 1 stop bit, no start bits.
|
|
*/
|
|
static int _lpuart_serial_init(struct lpuart_fsl *base)
|
|
{
|
|
u8 ctrl;
|
|
|
|
ctrl = __raw_readb(&base->uc2);
|
|
ctrl &= ~UC2_RE;
|
|
ctrl &= ~UC2_TE;
|
|
__raw_writeb(ctrl, &base->uc2);
|
|
|
|
__raw_writeb(0, &base->umodem);
|
|
__raw_writeb(0, &base->uc1);
|
|
|
|
/* Disable FIFO and flush buffer */
|
|
__raw_writeb(0x0, &base->upfifo);
|
|
__raw_writeb(0x0, &base->utwfifo);
|
|
__raw_writeb(0x1, &base->urwfifo);
|
|
__raw_writeb(CFIFO_TXFLUSH | CFIFO_RXFLUSH, &base->ucfifo);
|
|
|
|
/* provide data bits, parity, stop bit, etc */
|
|
_lpuart_serial_setbrg(base, gd->baudrate);
|
|
|
|
__raw_writeb(UC2_RE | UC2_TE, &base->uc2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpuart_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
struct lpuart_fsl *reg = plat->reg;
|
|
|
|
_lpuart_serial_setbrg(reg, baudrate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpuart_serial_getc(struct udevice *dev)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
struct lpuart_fsl *reg = plat->reg;
|
|
|
|
return _lpuart_serial_getc(reg);
|
|
}
|
|
|
|
static int lpuart_serial_putc(struct udevice *dev, const char c)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
struct lpuart_fsl *reg = plat->reg;
|
|
|
|
_lpuart_serial_putc(reg, c);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpuart_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
struct lpuart_fsl *reg = plat->reg;
|
|
|
|
if (input)
|
|
return _lpuart_serial_tstc(reg);
|
|
else
|
|
return __raw_readb(®->us1) & US1_TDRE ? 0 : 1;
|
|
}
|
|
|
|
static int lpuart_serial_probe(struct udevice *dev)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
struct lpuart_fsl *reg = plat->reg;
|
|
|
|
return _lpuart_serial_init(reg);
|
|
}
|
|
#else
|
|
|
|
static void _lpuart32_serial_setbrg(struct lpuart_fsl *base, int baudrate)
|
|
{
|
|
u32 clk = CONFIG_SYS_CLK_FREQ;
|
|
u32 sbr;
|
|
|
|
sbr = (clk / (16 * baudrate));
|
|
|
|
/* place adjustment later - n/32 BRFA */
|
|
out_be32(&base->baud, sbr);
|
|
}
|
|
|
|
static int _lpuart32_serial_getc(struct lpuart_fsl *base)
|
|
{
|
|
u32 stat;
|
|
|
|
while (((stat = in_be32(&base->stat)) & STAT_RDRF) == 0) {
|
|
out_be32(&base->stat, STAT_FLAGS);
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
return in_be32(&base->data) & 0x3ff;
|
|
}
|
|
|
|
static void _lpuart32_serial_putc(struct lpuart_fsl *base, const char c)
|
|
{
|
|
while (!(in_be32(&base->stat) & STAT_TDRE))
|
|
WATCHDOG_RESET();
|
|
|
|
out_be32(&base->data, c);
|
|
}
|
|
|
|
/* Test whether a character is in the RX buffer */
|
|
static int _lpuart32_serial_tstc(struct lpuart_fsl *base)
|
|
{
|
|
if ((in_be32(&base->water) >> 24) == 0)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Initialise the serial port with the given baudrate. The settings
|
|
* are always 8 data bits, no parity, 1 stop bit, no start bits.
|
|
*/
|
|
static int _lpuart32_serial_init(struct lpuart_fsl *base)
|
|
{
|
|
u8 ctrl;
|
|
|
|
ctrl = in_be32(&base->ctrl);
|
|
ctrl &= ~CTRL_RE;
|
|
ctrl &= ~CTRL_TE;
|
|
out_be32(&base->ctrl, ctrl);
|
|
|
|
out_be32(&base->modir, 0);
|
|
out_be32(&base->fifo, ~(FIFO_TXFE | FIFO_RXFE));
|
|
|
|
out_be32(&base->match, 0);
|
|
|
|
/* provide data bits, parity, stop bit, etc */
|
|
_lpuart32_serial_setbrg(base, gd->baudrate);
|
|
|
|
out_be32(&base->ctrl, CTRL_RE | CTRL_TE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpuart32_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
struct lpuart_fsl *reg = plat->reg;
|
|
|
|
_lpuart32_serial_setbrg(reg, baudrate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpuart32_serial_getc(struct udevice *dev)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
struct lpuart_fsl *reg = plat->reg;
|
|
|
|
return _lpuart32_serial_getc(reg);
|
|
}
|
|
|
|
static int lpuart32_serial_putc(struct udevice *dev, const char c)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
struct lpuart_fsl *reg = plat->reg;
|
|
|
|
_lpuart32_serial_putc(reg, c);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpuart32_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
struct lpuart_fsl *reg = plat->reg;
|
|
|
|
if (input)
|
|
return _lpuart32_serial_tstc(reg);
|
|
else
|
|
return in_be32(®->stat) & STAT_TDRE ? 0 : 1;
|
|
}
|
|
|
|
static int lpuart32_serial_probe(struct udevice *dev)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
struct lpuart_fsl *reg = plat->reg;
|
|
|
|
return _lpuart32_serial_init(reg);
|
|
}
|
|
#endif /* CONFIG_LPUART_32B_REG */
|
|
|
|
static int lpuart_serial_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
fdt_addr_t addr;
|
|
|
|
addr = dev_get_addr(dev);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
plat->reg = (struct lpuart_fsl *)addr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_LPUART_32B_REG
|
|
static const struct dm_serial_ops lpuart_serial_ops = {
|
|
.putc = lpuart_serial_putc,
|
|
.pending = lpuart_serial_pending,
|
|
.getc = lpuart_serial_getc,
|
|
.setbrg = lpuart_serial_setbrg,
|
|
};
|
|
|
|
static const struct udevice_id lpuart_serial_ids[] = {
|
|
{ .compatible = "fsl,vf610-lpuart" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_lpuart) = {
|
|
.name = "serial_lpuart",
|
|
.id = UCLASS_SERIAL,
|
|
.of_match = lpuart_serial_ids,
|
|
.ofdata_to_platdata = lpuart_serial_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct lpuart_serial_platdata),
|
|
.probe = lpuart_serial_probe,
|
|
.ops = &lpuart_serial_ops,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|
|
#else /* CONFIG_LPUART_32B_REG */
|
|
static const struct dm_serial_ops lpuart32_serial_ops = {
|
|
.putc = lpuart32_serial_putc,
|
|
.pending = lpuart32_serial_pending,
|
|
.getc = lpuart32_serial_getc,
|
|
.setbrg = lpuart32_serial_setbrg,
|
|
};
|
|
|
|
static const struct udevice_id lpuart32_serial_ids[] = {
|
|
{ .compatible = "fsl,ls1021a-lpuart" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_lpuart32) = {
|
|
.name = "serial_lpuart32",
|
|
.id = UCLASS_SERIAL,
|
|
.of_match = lpuart32_serial_ids,
|
|
.ofdata_to_platdata = lpuart_serial_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct lpuart_serial_platdata),
|
|
.probe = lpuart32_serial_probe,
|
|
.ops = &lpuart32_serial_ops,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|
|
#endif /* CONFIG_LPUART_32B_REG */
|