mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
e3e01a6f94
The Renesas RZ/G2L SMARC Evaluation Board Kit consists of the RZ/G2L System-on-Module (SOM) based on the R9A07G044L2 SoC, and a common SMARC carrier board. This patch is based on the corresponding Linux v6.5 device tree (commit 52e12027d50affbf60c6c9c64db8017391b0c22e). Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
183 lines
3.1 KiB
Text
183 lines
3.1 KiB
Text
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
/*
|
|
* Device Tree Source for the RZ/{G2L,G2LC,V2L} SMARC EVK common parts
|
|
*
|
|
* Copyright (C) 2022 Renesas Electronics Corp.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
|
|
|
|
/*
|
|
* SSI-WM8978
|
|
*
|
|
* This command is required when Playback/Capture
|
|
*
|
|
* amixer cset name='Left Input Mixer L2 Switch' on
|
|
* amixer cset name='Right Input Mixer R2 Switch' on
|
|
* amixer cset name='Headphone Playback Volume' 100
|
|
* amixer cset name='PCM Volume' 100%
|
|
* amixer cset name='Input PGA Volume' 25
|
|
*
|
|
*/
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &scif0;
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
audio_mclock: audio_mclock {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <11289600>;
|
|
};
|
|
|
|
snd_rzg2l: sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,bitclock-master = <&cpu_dai>;
|
|
simple-audio-card,frame-master = <&cpu_dai>;
|
|
simple-audio-card,mclk-fs = <256>;
|
|
|
|
simple-audio-card,widgets = "Microphone", "Microphone Jack";
|
|
simple-audio-card,routing =
|
|
"L2", "Mic Bias",
|
|
"R2", "Mic Bias",
|
|
"Mic Bias", "Microphone Jack";
|
|
|
|
cpu_dai: simple-audio-card,cpu {
|
|
};
|
|
|
|
codec_dai: simple-audio-card,codec {
|
|
clocks = <&audio_mclock>;
|
|
sound-dai = <&wm8978>;
|
|
};
|
|
};
|
|
|
|
usb0_vbus_otg: regulator-usb0-vbus-otg {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "USB0_VBUS_OTG";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
vccq_sdhi1: regulator-vccq-sdhi1 {
|
|
compatible = "regulator-gpio";
|
|
regulator-name = "SDHI1 VccQ";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpios-states = <1>;
|
|
states = <3300000 1>, <1800000 0>;
|
|
};
|
|
};
|
|
|
|
&audio_clk1{
|
|
clock-frequency = <11289600>;
|
|
};
|
|
|
|
&audio_clk2{
|
|
clock-frequency = <12288000>;
|
|
};
|
|
|
|
&canfd {
|
|
pinctrl-0 = <&can0_pins &can1_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
channel0 {
|
|
status = "okay";
|
|
};
|
|
|
|
channel1 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&ehci0 {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hsusb {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci0 {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&phyrst {
|
|
status = "okay";
|
|
};
|
|
|
|
&scif0 {
|
|
pinctrl-0 = <&scif0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhi1 {
|
|
pinctrl-0 = <&sdhi1_pins>;
|
|
pinctrl-1 = <&sdhi1_pins_uhs>;
|
|
pinctrl-names = "default", "state_uhs";
|
|
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <&vccq_sdhi1>;
|
|
bus-width = <4>;
|
|
sd-uhs-sdr50;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
};
|
|
|
|
&spi1 {
|
|
pinctrl-0 = <&spi1_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2_phy0 {
|
|
pinctrl-0 = <&usb0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
vbus-supply = <&usb0_vbus_otg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2_phy1 {
|
|
pinctrl-0 = <&usb1_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|