mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 07:57:21 +00:00
b82bd1f8d4
The BROM supports forcing it to enter download-mode, if an appropriate result/cmd-word is returned to it. There already is a series to support this in review, so this prepares the (newly C-version) of the back-to-bootrom code to accept a cmd to passed on to the BROM. All the existing call-sites are adjusted to match the changed function signature. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Andy Yan <andy.yan@rock-chips.com>
157 lines
3.9 KiB
C
157 lines
3.9 KiB
C
/*
|
|
* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <debug_uart.h>
|
|
#include <dm.h>
|
|
#include <ram.h>
|
|
#include <spl.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/bootrom.h>
|
|
#include <asm/arch/cru_rk3368.h>
|
|
#include <asm/arch/grf_rk3368.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/timer.h>
|
|
#include <syscon.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* The SPL (and also the full U-Boot stage on the RK3368) will run in
|
|
* secure mode (i.e. EL3) and an ATF will eventually be booted before
|
|
* starting up the operating system... so we can initialize the SGRF
|
|
* here and rely on the ATF installing the final (secure) policy
|
|
* later.
|
|
*/
|
|
static inline uintptr_t sgrf_soc_con_addr(unsigned no)
|
|
{
|
|
const uintptr_t SGRF_BASE =
|
|
(uintptr_t)syscon_get_first_range(ROCKCHIP_SYSCON_SGRF);
|
|
|
|
return SGRF_BASE + sizeof(u32) * no;
|
|
}
|
|
|
|
static inline uintptr_t sgrf_busdmac_addr(unsigned no)
|
|
{
|
|
const uintptr_t SGRF_BASE =
|
|
(uintptr_t)syscon_get_first_range(ROCKCHIP_SYSCON_SGRF);
|
|
const uintptr_t SGRF_BUSDMAC_OFFSET = 0x100;
|
|
const uintptr_t SGRF_BUSDMAC_BASE = SGRF_BASE + SGRF_BUSDMAC_OFFSET;
|
|
|
|
return SGRF_BUSDMAC_BASE + sizeof(u32) * no;
|
|
}
|
|
|
|
static void sgrf_init(void)
|
|
{
|
|
struct rk3368_cru * const cru =
|
|
(struct rk3368_cru * const)rockchip_get_cru();
|
|
const u16 SGRF_SOC_CON_SEC = GENMASK(15, 0);
|
|
const u16 SGRF_BUSDMAC_CON0_SEC = BIT(2);
|
|
const u16 SGRF_BUSDMAC_CON1_SEC = GENMASK(15, 12);
|
|
|
|
/* Set all configurable IP to 'non secure'-mode */
|
|
rk_setreg(sgrf_soc_con_addr(5), SGRF_SOC_CON_SEC);
|
|
rk_setreg(sgrf_soc_con_addr(6), SGRF_SOC_CON_SEC);
|
|
rk_setreg(sgrf_soc_con_addr(7), SGRF_SOC_CON_SEC);
|
|
|
|
/*
|
|
* From rockchip-uboot/arch/arm/cpu/armv8/rk33xx/cpu.c
|
|
* Original comment: "ddr space set no secure mode"
|
|
*/
|
|
rk_clrreg(sgrf_soc_con_addr(8), SGRF_SOC_CON_SEC);
|
|
rk_clrreg(sgrf_soc_con_addr(9), SGRF_SOC_CON_SEC);
|
|
rk_clrreg(sgrf_soc_con_addr(10), SGRF_SOC_CON_SEC);
|
|
|
|
/* Set 'secure dma' to 'non secure'-mode */
|
|
rk_setreg(sgrf_busdmac_addr(0), SGRF_BUSDMAC_CON0_SEC);
|
|
rk_setreg(sgrf_busdmac_addr(1), SGRF_BUSDMAC_CON1_SEC);
|
|
|
|
dsb(); /* barrier */
|
|
|
|
rk_setreg(&cru->softrst_con[1], DMA1_SRST_REQ);
|
|
rk_setreg(&cru->softrst_con[4], DMA2_SRST_REQ);
|
|
|
|
dsb(); /* barrier */
|
|
udelay(10);
|
|
|
|
rk_clrreg(&cru->softrst_con[1], DMA1_SRST_REQ);
|
|
rk_clrreg(&cru->softrst_con[4], DMA2_SRST_REQ);
|
|
}
|
|
|
|
void board_debug_uart_init(void)
|
|
{
|
|
/*
|
|
* N.B.: This is called before the device-model has been
|
|
* initialised. For this reason, we can not access
|
|
* the GRF address range using the syscon API.
|
|
*/
|
|
struct rk3368_grf * const grf =
|
|
(struct rk3368_grf * const)0xff770000;
|
|
|
|
enum {
|
|
GPIO2D1_MASK = GENMASK(3, 2),
|
|
GPIO2D1_GPIO = 0,
|
|
GPIO2D1_UART0_SOUT = (1 << 2),
|
|
|
|
GPIO2D0_MASK = GENMASK(1, 0),
|
|
GPIO2D0_GPIO = 0,
|
|
GPIO2D0_UART0_SIN = (1 << 0),
|
|
};
|
|
|
|
#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
|
|
/* Enable early UART0 on the RK3368 */
|
|
rk_clrsetreg(&grf->gpio2d_iomux,
|
|
GPIO2D0_MASK, GPIO2D0_UART0_SIN);
|
|
rk_clrsetreg(&grf->gpio2d_iomux,
|
|
GPIO2D1_MASK, GPIO2D1_UART0_SOUT);
|
|
#endif
|
|
}
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
#define EARLY_UART
|
|
#ifdef EARLY_UART
|
|
/*
|
|
* Debug UART can be used from here if required:
|
|
*
|
|
* debug_uart_init();
|
|
* printch('a');
|
|
* printhex8(0x1234);
|
|
* printascii("string");
|
|
*/
|
|
debug_uart_init();
|
|
printascii("U-Boot TPL board init\n");
|
|
#endif
|
|
|
|
ret = spl_early_init();
|
|
if (ret) {
|
|
debug("spl_early_init() failed: %d\n", ret);
|
|
hang();
|
|
}
|
|
|
|
/* Reset security, so we can use DMA in the MMC drivers */
|
|
sgrf_init();
|
|
|
|
ret = uclass_get_device(UCLASS_RAM, 0, &dev);
|
|
if (ret) {
|
|
debug("DRAM init failed: %d\n", ret);
|
|
return;
|
|
}
|
|
}
|
|
|
|
void board_return_to_bootrom(void)
|
|
{
|
|
back_to_bootrom(BROM_BOOT_NEXTSTAGE);
|
|
}
|
|
|
|
u32 spl_boot_device(void)
|
|
{
|
|
return BOOT_DEVICE_BOOTROM;
|
|
}
|