u-boot/arch/arm/dts/socfpga_cyclone5_socdk.dts
Marek Vasut 68909e823e arm: socfpga: Make /soc available in pre-reloc
This node must be available before relocation, otherwise the board
will not find mmc and will thus not boot.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-12-22 04:42:28 +01:00

107 lines
1.8 KiB
Text

/*
* Copyright (C) 2012 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include "socfpga_cyclone5.dtsi"
/ {
model = "Altera SOCFPGA Cyclone V SoC Development Kit";
compatible = "altr,socfpga-cyclone5", "altr,socfpga";
chosen {
bootargs = "console=ttyS0,115200";
};
memory {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
};
aliases {
/* this allow the ethaddr uboot environmnet variable contents
* to be added to the gmac1 device tree blob.
*/
ethernet0 = &gmac1;
udc0 = &usb1;
};
regulator_3_3v: 3-3-v-regulator {
compatible = "regulator-fixed";
regulator-name = "3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
soc {
u-boot,dm-pre-reloc;
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
rxd0-skew-ps = <0>;
rxd1-skew-ps = <0>;
rxd2-skew-ps = <0>;
rxd3-skew-ps = <0>;
txen-skew-ps = <0>;
txc-skew-ps = <2600>;
rxdv-skew-ps = <0>;
rxc-skew-ps = <2000>;
};
&gpio1 {
status = "okay";
};
&i2c0 {
status = "okay";
eeprom@51 {
compatible = "atmel,24c32";
reg = <0x51>;
pagesize = <32>;
};
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
&mmc0 {
status = "okay";
u-boot,dm-pre-reloc;
cd-gpios = <&portb 18 0>;
vmmc-supply = <&regulator_3_3v>;
vqmmc-supply = <&regulator_3_3v>;
};
&qspi {
status = "okay";
flash0: n25q00@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q00";
reg = <0>; /* chip select */
spi-max-frequency = <100000000>;
m25p,fast-read;
page-size = <256>;
block-size = <16>; /* 2^16, 64KB */
read-delay = <4>; /* delay value in read data capture register */
tshsl-ns = <50>;
tsd2d-ns = <50>;
tchsh-ns = <4>;
tslch-ns = <4>;
};
};
&usb1 {
status = "okay";
};