mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 15:41:40 +00:00
56c4046038
This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
314 lines
6.5 KiB
C
314 lines
6.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2000-2010
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Andreas Heppel <aheppel@sysgo.de>
|
|
*
|
|
* (C) Copyright 2008 Atmel Corporation
|
|
*/
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <env.h>
|
|
#include <env_internal.h>
|
|
#include <flash.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <spi_flash.h>
|
|
#include <search.h>
|
|
#include <errno.h>
|
|
#include <uuid.h>
|
|
#include <asm/cache.h>
|
|
#include <dm/device-internal.h>
|
|
#include <u-boot/crc.h>
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define INITENV
|
|
#endif
|
|
|
|
#ifdef CONFIG_ENV_OFFSET_REDUND
|
|
static ulong env_offset = CONFIG_ENV_OFFSET;
|
|
static ulong env_new_offset = CONFIG_ENV_OFFSET_REDUND;
|
|
#endif /* CONFIG_ENV_OFFSET_REDUND */
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static struct spi_flash *env_flash;
|
|
|
|
static int setup_flash_device(void)
|
|
{
|
|
#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
|
|
struct udevice *new;
|
|
int ret;
|
|
|
|
/* speed and mode will be read from DT */
|
|
ret = spi_flash_probe_bus_cs(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
|
|
CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE,
|
|
&new);
|
|
if (ret) {
|
|
env_set_default("spi_flash_probe_bus_cs() failed", 0);
|
|
return ret;
|
|
}
|
|
|
|
env_flash = dev_get_uclass_priv(new);
|
|
#else
|
|
if (env_flash)
|
|
spi_flash_free(env_flash);
|
|
|
|
env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
|
|
CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
|
|
if (!env_flash) {
|
|
env_set_default("spi_flash_probe() failed", 0);
|
|
return -EIO;
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_ENV_OFFSET_REDUND)
|
|
static int env_sf_save(void)
|
|
{
|
|
env_t env_new;
|
|
char *saved_buffer = NULL, flag = ENV_REDUND_OBSOLETE;
|
|
u32 saved_size, saved_offset, sector;
|
|
int ret;
|
|
|
|
ret = setup_flash_device();
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = env_export(&env_new);
|
|
if (ret)
|
|
return -EIO;
|
|
env_new.flags = ENV_REDUND_ACTIVE;
|
|
|
|
if (gd->env_valid == ENV_VALID) {
|
|
env_new_offset = CONFIG_ENV_OFFSET_REDUND;
|
|
env_offset = CONFIG_ENV_OFFSET;
|
|
} else {
|
|
env_new_offset = CONFIG_ENV_OFFSET;
|
|
env_offset = CONFIG_ENV_OFFSET_REDUND;
|
|
}
|
|
|
|
/* Is the sector larger than the env (i.e. embedded) */
|
|
if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
|
|
saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE;
|
|
saved_offset = env_new_offset + CONFIG_ENV_SIZE;
|
|
saved_buffer = memalign(ARCH_DMA_MINALIGN, saved_size);
|
|
if (!saved_buffer) {
|
|
ret = -ENOMEM;
|
|
goto done;
|
|
}
|
|
ret = spi_flash_read(env_flash, saved_offset,
|
|
saved_size, saved_buffer);
|
|
if (ret)
|
|
goto done;
|
|
}
|
|
|
|
sector = DIV_ROUND_UP(CONFIG_ENV_SIZE, CONFIG_ENV_SECT_SIZE);
|
|
|
|
puts("Erasing SPI flash...");
|
|
ret = spi_flash_erase(env_flash, env_new_offset,
|
|
sector * CONFIG_ENV_SECT_SIZE);
|
|
if (ret)
|
|
goto done;
|
|
|
|
puts("Writing to SPI flash...");
|
|
|
|
ret = spi_flash_write(env_flash, env_new_offset,
|
|
CONFIG_ENV_SIZE, &env_new);
|
|
if (ret)
|
|
goto done;
|
|
|
|
if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
|
|
ret = spi_flash_write(env_flash, saved_offset,
|
|
saved_size, saved_buffer);
|
|
if (ret)
|
|
goto done;
|
|
}
|
|
|
|
ret = spi_flash_write(env_flash, env_offset + offsetof(env_t, flags),
|
|
sizeof(env_new.flags), &flag);
|
|
if (ret)
|
|
goto done;
|
|
|
|
puts("done\n");
|
|
|
|
gd->env_valid = gd->env_valid == ENV_REDUND ? ENV_VALID : ENV_REDUND;
|
|
|
|
printf("Valid environment: %d\n", (int)gd->env_valid);
|
|
|
|
done:
|
|
if (saved_buffer)
|
|
free(saved_buffer);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int env_sf_load(void)
|
|
{
|
|
int ret;
|
|
int read1_fail, read2_fail;
|
|
env_t *tmp_env1, *tmp_env2;
|
|
|
|
tmp_env1 = (env_t *)memalign(ARCH_DMA_MINALIGN,
|
|
CONFIG_ENV_SIZE);
|
|
tmp_env2 = (env_t *)memalign(ARCH_DMA_MINALIGN,
|
|
CONFIG_ENV_SIZE);
|
|
if (!tmp_env1 || !tmp_env2) {
|
|
env_set_default("malloc() failed", 0);
|
|
ret = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
ret = setup_flash_device();
|
|
if (ret)
|
|
goto out;
|
|
|
|
read1_fail = spi_flash_read(env_flash, CONFIG_ENV_OFFSET,
|
|
CONFIG_ENV_SIZE, tmp_env1);
|
|
read2_fail = spi_flash_read(env_flash, CONFIG_ENV_OFFSET_REDUND,
|
|
CONFIG_ENV_SIZE, tmp_env2);
|
|
|
|
ret = env_import_redund((char *)tmp_env1, read1_fail, (char *)tmp_env2,
|
|
read2_fail);
|
|
|
|
spi_flash_free(env_flash);
|
|
env_flash = NULL;
|
|
out:
|
|
free(tmp_env1);
|
|
free(tmp_env2);
|
|
|
|
return ret;
|
|
}
|
|
#else
|
|
static int env_sf_save(void)
|
|
{
|
|
u32 saved_size, saved_offset, sector;
|
|
char *saved_buffer = NULL;
|
|
int ret = 1;
|
|
env_t env_new;
|
|
|
|
ret = setup_flash_device();
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Is the sector larger than the env (i.e. embedded) */
|
|
if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
|
|
saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE;
|
|
saved_offset = CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE;
|
|
saved_buffer = malloc(saved_size);
|
|
if (!saved_buffer)
|
|
goto done;
|
|
|
|
ret = spi_flash_read(env_flash, saved_offset,
|
|
saved_size, saved_buffer);
|
|
if (ret)
|
|
goto done;
|
|
}
|
|
|
|
ret = env_export(&env_new);
|
|
if (ret)
|
|
goto done;
|
|
|
|
sector = DIV_ROUND_UP(CONFIG_ENV_SIZE, CONFIG_ENV_SECT_SIZE);
|
|
|
|
puts("Erasing SPI flash...");
|
|
ret = spi_flash_erase(env_flash, CONFIG_ENV_OFFSET,
|
|
sector * CONFIG_ENV_SECT_SIZE);
|
|
if (ret)
|
|
goto done;
|
|
|
|
puts("Writing to SPI flash...");
|
|
ret = spi_flash_write(env_flash, CONFIG_ENV_OFFSET,
|
|
CONFIG_ENV_SIZE, &env_new);
|
|
if (ret)
|
|
goto done;
|
|
|
|
if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
|
|
ret = spi_flash_write(env_flash, saved_offset,
|
|
saved_size, saved_buffer);
|
|
if (ret)
|
|
goto done;
|
|
}
|
|
|
|
ret = 0;
|
|
puts("done\n");
|
|
|
|
done:
|
|
if (saved_buffer)
|
|
free(saved_buffer);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int env_sf_load(void)
|
|
{
|
|
int ret;
|
|
char *buf = NULL;
|
|
|
|
buf = (char *)memalign(ARCH_DMA_MINALIGN, CONFIG_ENV_SIZE);
|
|
if (!buf) {
|
|
env_set_default("malloc() failed", 0);
|
|
return -EIO;
|
|
}
|
|
|
|
ret = setup_flash_device();
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = spi_flash_read(env_flash,
|
|
CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, buf);
|
|
if (ret) {
|
|
env_set_default("spi_flash_read() failed", 0);
|
|
goto err_read;
|
|
}
|
|
|
|
ret = env_import(buf, 1);
|
|
if (!ret)
|
|
gd->env_valid = ENV_VALID;
|
|
|
|
err_read:
|
|
spi_flash_free(env_flash);
|
|
env_flash = NULL;
|
|
out:
|
|
free(buf);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_ENV_ADDR != 0x0
|
|
__weak void *env_sf_get_env_addr(void)
|
|
{
|
|
return (void *)CONFIG_ENV_ADDR;
|
|
}
|
|
#endif
|
|
|
|
#if defined(INITENV) && (CONFIG_ENV_ADDR != 0x0)
|
|
static int env_sf_init(void)
|
|
{
|
|
env_t *env_ptr = (env_t *)env_sf_get_env_addr();
|
|
|
|
if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) {
|
|
gd->env_addr = (ulong)&(env_ptr->data);
|
|
gd->env_valid = 1;
|
|
} else {
|
|
gd->env_addr = (ulong)&default_environment[0];
|
|
gd->env_valid = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
U_BOOT_ENV_LOCATION(sf) = {
|
|
.location = ENVL_SPI_FLASH,
|
|
ENV_NAME("SPI Flash")
|
|
.load = env_sf_load,
|
|
.save = CONFIG_IS_ENABLED(SAVEENV) ? ENV_SAVE_PTR(env_sf_save) : NULL,
|
|
#if defined(INITENV) && (CONFIG_ENV_ADDR != 0x0)
|
|
.init = env_sf_init,
|
|
#endif
|
|
};
|