mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-29 16:10:58 +00:00
052cafd2a5
This patch adds MT7629 qspi driver for accessing SPI NOR flash. Signed-off-by: Guochun Mao <guochun.mao@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
359 lines
7.8 KiB
C
359 lines
7.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2018 MediaTek, Inc.
|
|
* Author : Guochun.Mao@mediatek.com
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <asm/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/ioport.h>
|
|
|
|
/* Register Offset */
|
|
struct mtk_qspi_regs {
|
|
u32 cmd;
|
|
u32 cnt;
|
|
u32 rdsr;
|
|
u32 rdata;
|
|
u32 radr[3];
|
|
u32 wdata;
|
|
u32 prgdata[6];
|
|
u32 shreg[10];
|
|
u32 cfg[2];
|
|
u32 shreg10;
|
|
u32 mode_mon;
|
|
u32 status[4];
|
|
u32 flash_time;
|
|
u32 flash_cfg;
|
|
u32 reserved_0[3];
|
|
u32 sf_time;
|
|
u32 pp_dw_data;
|
|
u32 reserved_1;
|
|
u32 delsel_0[2];
|
|
u32 intrstus;
|
|
u32 intren;
|
|
u32 reserved_2;
|
|
u32 cfg3;
|
|
u32 reserved_3;
|
|
u32 chksum;
|
|
u32 aaicmd;
|
|
u32 wrprot;
|
|
u32 radr3;
|
|
u32 dual;
|
|
u32 delsel_1[3];
|
|
};
|
|
|
|
struct mtk_qspi_platdata {
|
|
fdt_addr_t reg_base;
|
|
fdt_addr_t mem_base;
|
|
};
|
|
|
|
struct mtk_qspi_priv {
|
|
struct mtk_qspi_regs *regs;
|
|
unsigned long *mem_base;
|
|
u8 op;
|
|
u8 tx[3]; /* only record max 3 bytes paras, when it's address. */
|
|
u32 txlen; /* dout buffer length - op code length */
|
|
u8 *rx;
|
|
u32 rxlen;
|
|
};
|
|
|
|
#define MTK_QSPI_CMD_POLLINGREG_US 500000
|
|
#define MTK_QSPI_WRBUF_SIZE 256
|
|
#define MTK_QSPI_COMMAND_ENABLE 0x30
|
|
|
|
/* NOR flash controller commands */
|
|
#define MTK_QSPI_RD_TRIGGER BIT(0)
|
|
#define MTK_QSPI_READSTATUS BIT(1)
|
|
#define MTK_QSPI_PRG_CMD BIT(2)
|
|
#define MTK_QSPI_WR_TRIGGER BIT(4)
|
|
#define MTK_QSPI_WRITESTATUS BIT(5)
|
|
#define MTK_QSPI_AUTOINC BIT(7)
|
|
|
|
#define MTK_QSPI_MAX_RX_TX_SHIFT 0x6
|
|
#define MTK_QSPI_MAX_SHIFT 0x8
|
|
|
|
#define MTK_QSPI_WR_BUF_ENABLE 0x1
|
|
#define MTK_QSPI_WR_BUF_DISABLE 0x0
|
|
|
|
static int mtk_qspi_execute_cmd(struct mtk_qspi_priv *priv, u8 cmd)
|
|
{
|
|
u8 tmp;
|
|
u8 val = cmd & ~MTK_QSPI_AUTOINC;
|
|
|
|
writeb(cmd, &priv->regs->cmd);
|
|
|
|
return readb_poll_timeout(&priv->regs->cmd, tmp, !(val & tmp),
|
|
MTK_QSPI_CMD_POLLINGREG_US);
|
|
}
|
|
|
|
static int mtk_qspi_tx_rx(struct mtk_qspi_priv *priv)
|
|
{
|
|
int len = 1 + priv->txlen + priv->rxlen;
|
|
int i, ret, idx;
|
|
|
|
if (len > MTK_QSPI_MAX_SHIFT)
|
|
return -ERR_INVAL;
|
|
|
|
writeb(len * 8, &priv->regs->cnt);
|
|
|
|
/* start at PRGDATA5, go down to PRGDATA0 */
|
|
idx = MTK_QSPI_MAX_RX_TX_SHIFT - 1;
|
|
|
|
/* opcode */
|
|
writeb(priv->op, &priv->regs->prgdata[idx]);
|
|
idx--;
|
|
|
|
/* program TX data */
|
|
for (i = 0; i < priv->txlen; i++, idx--)
|
|
writeb(priv->tx[i], &priv->regs->prgdata[idx]);
|
|
|
|
/* clear out rest of TX registers */
|
|
while (idx >= 0) {
|
|
writeb(0, &priv->regs->prgdata[idx]);
|
|
idx--;
|
|
}
|
|
|
|
ret = mtk_qspi_execute_cmd(priv, MTK_QSPI_PRG_CMD);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* restart at first RX byte */
|
|
idx = priv->rxlen - 1;
|
|
|
|
/* read out RX data */
|
|
for (i = 0; i < priv->rxlen; i++, idx--)
|
|
priv->rx[i] = readb(&priv->regs->shreg[idx]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_qspi_read(struct mtk_qspi_priv *priv,
|
|
u32 addr, u8 *buf, u32 len)
|
|
{
|
|
memcpy(buf, (u8 *)priv->mem_base + addr, len);
|
|
return 0;
|
|
}
|
|
|
|
static void mtk_qspi_set_addr(struct mtk_qspi_priv *priv, u32 addr)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
writeb(addr & 0xff, &priv->regs->radr[i]);
|
|
addr >>= 8;
|
|
}
|
|
}
|
|
|
|
static int mtk_qspi_write_single_byte(struct mtk_qspi_priv *priv,
|
|
u32 addr, u32 length, const u8 *data)
|
|
{
|
|
int i, ret;
|
|
|
|
mtk_qspi_set_addr(priv, addr);
|
|
|
|
for (i = 0; i < length; i++) {
|
|
writeb(*data++, &priv->regs->wdata);
|
|
ret = mtk_qspi_execute_cmd(priv, MTK_QSPI_WR_TRIGGER);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_qspi_write_buffer(struct mtk_qspi_priv *priv, u32 addr,
|
|
const u8 *buf)
|
|
{
|
|
int i, data;
|
|
|
|
mtk_qspi_set_addr(priv, addr);
|
|
|
|
for (i = 0; i < MTK_QSPI_WRBUF_SIZE; i += 4) {
|
|
data = buf[i + 3] << 24 | buf[i + 2] << 16 |
|
|
buf[i + 1] << 8 | buf[i];
|
|
writel(data, &priv->regs->pp_dw_data);
|
|
}
|
|
|
|
return mtk_qspi_execute_cmd(priv, MTK_QSPI_WR_TRIGGER);
|
|
}
|
|
|
|
static int mtk_qspi_write(struct mtk_qspi_priv *priv,
|
|
u32 addr, const u8 *buf, u32 len)
|
|
{
|
|
int ret;
|
|
|
|
/* setting pre-fetch buffer for page program */
|
|
writel(MTK_QSPI_WR_BUF_ENABLE, &priv->regs->cfg[1]);
|
|
while (len >= MTK_QSPI_WRBUF_SIZE) {
|
|
ret = mtk_qspi_write_buffer(priv, addr, buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
len -= MTK_QSPI_WRBUF_SIZE;
|
|
addr += MTK_QSPI_WRBUF_SIZE;
|
|
buf += MTK_QSPI_WRBUF_SIZE;
|
|
}
|
|
/* disable pre-fetch buffer for page program */
|
|
writel(MTK_QSPI_WR_BUF_DISABLE, &priv->regs->cfg[1]);
|
|
|
|
if (len)
|
|
return mtk_qspi_write_single_byte(priv, addr, len, buf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_qspi_claim_bus(struct udevice *dev)
|
|
{
|
|
/* nothing to do */
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_qspi_release_bus(struct udevice *dev)
|
|
{
|
|
/* nothing to do */
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_qspi_transfer(struct mtk_qspi_priv *priv, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
u32 bytes = DIV_ROUND_UP(bitlen, 8);
|
|
u32 addr;
|
|
|
|
if (!bytes)
|
|
return -ERR_INVAL;
|
|
|
|
if (dout) {
|
|
if (flags & SPI_XFER_BEGIN) {
|
|
/* parse op code and potential paras first */
|
|
priv->op = *(u8 *)dout;
|
|
if (bytes > 1)
|
|
memcpy(priv->tx, (u8 *)dout + 1,
|
|
bytes <= 4 ? bytes - 1 : 3);
|
|
priv->txlen = bytes - 1;
|
|
}
|
|
|
|
if (flags == SPI_XFER_ONCE) {
|
|
/* operations without receiving or sending data.
|
|
* for example: erase, write flash register or write
|
|
* enable...
|
|
*/
|
|
priv->rx = NULL;
|
|
priv->rxlen = 0;
|
|
return mtk_qspi_tx_rx(priv);
|
|
}
|
|
|
|
if (flags & SPI_XFER_END) {
|
|
/* here, dout should be data to be written.
|
|
* and priv->tx should be filled 3Bytes address.
|
|
*/
|
|
addr = priv->tx[0] << 16 | priv->tx[1] << 8 |
|
|
priv->tx[2];
|
|
return mtk_qspi_write(priv, addr, (u8 *)dout, bytes);
|
|
}
|
|
}
|
|
|
|
if (din) {
|
|
if (priv->txlen >= 3) {
|
|
/* if run to here, priv->tx[] should be the address
|
|
* where read data from,
|
|
* and, din is the buf to receive data.
|
|
*/
|
|
addr = priv->tx[0] << 16 | priv->tx[1] << 8 |
|
|
priv->tx[2];
|
|
return mtk_qspi_read(priv, addr, (u8 *)din, bytes);
|
|
}
|
|
|
|
/* should be reading flash's register */
|
|
priv->rx = (u8 *)din;
|
|
priv->rxlen = bytes;
|
|
return mtk_qspi_tx_rx(priv);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_qspi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct mtk_qspi_priv *priv = dev_get_priv(bus);
|
|
|
|
return mtk_qspi_transfer(priv, bitlen, dout, din, flags);
|
|
}
|
|
|
|
static int mtk_qspi_set_speed(struct udevice *bus, uint speed)
|
|
{
|
|
/* nothing to do */
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_qspi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
/* nothing to do */
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_qspi_ofdata_to_platdata(struct udevice *bus)
|
|
{
|
|
struct resource res_reg, res_mem;
|
|
struct mtk_qspi_platdata *plat = bus->platdata;
|
|
int ret;
|
|
|
|
ret = dev_read_resource_byname(bus, "reg_base", &res_reg);
|
|
if (ret) {
|
|
debug("can't get reg_base resource(ret = %d)\n", ret);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ret = dev_read_resource_byname(bus, "mem_base", &res_mem);
|
|
if (ret) {
|
|
debug("can't get map_base resource(ret = %d)\n", ret);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
plat->mem_base = res_mem.start;
|
|
plat->reg_base = res_reg.start;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_qspi_probe(struct udevice *bus)
|
|
{
|
|
struct mtk_qspi_platdata *plat = dev_get_platdata(bus);
|
|
struct mtk_qspi_priv *priv = dev_get_priv(bus);
|
|
|
|
priv->regs = (struct mtk_qspi_regs *)plat->reg_base;
|
|
priv->mem_base = (unsigned long *)plat->mem_base;
|
|
|
|
writel(MTK_QSPI_COMMAND_ENABLE, &priv->regs->wrprot);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops mtk_qspi_ops = {
|
|
.claim_bus = mtk_qspi_claim_bus,
|
|
.release_bus = mtk_qspi_release_bus,
|
|
.xfer = mtk_qspi_xfer,
|
|
.set_speed = mtk_qspi_set_speed,
|
|
.set_mode = mtk_qspi_set_mode,
|
|
};
|
|
|
|
static const struct udevice_id mtk_qspi_ids[] = {
|
|
{ .compatible = "mediatek,mt7629-qspi" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(mtk_qspi) = {
|
|
.name = "mtk_qspi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = mtk_qspi_ids,
|
|
.ops = &mtk_qspi_ops,
|
|
.ofdata_to_platdata = mtk_qspi_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct mtk_qspi_platdata),
|
|
.priv_auto_alloc_size = sizeof(struct mtk_qspi_priv),
|
|
.probe = mtk_qspi_probe,
|
|
};
|