u-boot/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c
Quentin Schulz 58d258c8c4 imx: imx8mp_rsb3720a1: fix incorrect ifdef check on SPL_MMC
Since commit 103c5f1806 ("mmc: Rename MMC_SUPPORT to MMC"),
SPL_MMC_SUPPORT is named SPL_MMC, so let's fix the ifdef.

Fixes: fbc6b14143 ("imx: imx8mp_rsb3720a1: convert to DM_SERIAL")
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
2022-08-04 15:32:20 -04:00

222 lines
4.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2019 NXP
* Copyright 2022 Linaro
*/
#include <common.h>
#include <dwc3-uboot.h>
#include <efi.h>
#include <efi_loader.h>
#include <errno.h>
#include <miiphy.h>
#include <netdev.h>
#include <spl.h>
#include <usb.h>
#include <asm/io.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm-generic/gpio.h>
#include <asm/arch/imx8mp_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-imx/gpio.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/arch/clock.h>
#include <asm/mach-imx/dma.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <power/pmic.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_NAND_MXS
static void setup_gpmi_nand(void)
{
init_nand_clk();
}
#endif
#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
struct efi_fw_image fw_images[] = {
#if defined(CONFIG_TARGET_IMX8MP_RSB3720A1_4G)
{
.image_type_id = IMX8MP_RSB3720A1_4G_FIT_IMAGE_GUID,
.fw_name = u"IMX8MP-RSB3720-FIT",
.image_index = 1,
},
#elif defined(CONFIG_TARGET_IMX8MP_RSB3720A1_6G)
{
.image_type_id = IMX8MP_RSB3720A1_6G_FIT_IMAGE_GUID,
.fw_name = u"IMX8MP-RSB3720-FIT",
.image_index = 1,
},
#endif
};
struct efi_capsule_update_info update_info = {
.dfu_string = "mmc 2=flash-bin raw 0 0x1B00 mmcpart 1",
.images = fw_images,
};
u8 num_image_type_guids = ARRAY_SIZE(fw_images);
#endif /* EFI_HAVE_CAPSULE_SUPPORT */
int board_early_init_f(void)
{
init_uart_clk(2);
return 0;
}
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, struct bd_info *bd)
{
return 0;
}
#endif
#ifdef CONFIG_FEC_MXC
#define FEC_RST_PAD IMX_GPIO_NR(4, 2)
static const iomux_v3_cfg_t fec1_rst_pads[] = {
MX8MP_PAD_SAI1_RXD0__GPIO4_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static void setup_iomux_fec(void)
{
imx_iomux_v3_setup_multiple_pads(fec1_rst_pads,
ARRAY_SIZE(fec1_rst_pads));
gpio_request(FEC_RST_PAD, "fec1_rst");
gpio_direction_output(FEC_RST_PAD, 0);
mdelay(15);
gpio_direction_output(FEC_RST_PAD, 1);
mdelay(100);
}
static int setup_fec(void)
{
struct iomuxc_gpr_base_regs *gpr =
(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
setup_iomux_fec();
/* Enable RGMII TX clk output */
setbits_le32(&gpr->gpr[1], BIT(22));
return 0;
}
#endif /* CONFIG_FEC_MXC */
#ifdef CONFIG_DWC_ETH_QOS
#define EQOS_RST_PAD IMX_GPIO_NR(4, 22)
static const iomux_v3_cfg_t eqos_rst_pads[] = {
MX8MP_PAD_SAI2_RXC__GPIO4_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static void setup_iomux_eqos(void)
{
imx_iomux_v3_setup_multiple_pads(eqos_rst_pads,
ARRAY_SIZE(eqos_rst_pads));
gpio_request(EQOS_RST_PAD, "eqos_rst");
gpio_direction_output(EQOS_RST_PAD, 0);
mdelay(15);
gpio_direction_output(EQOS_RST_PAD, 1);
mdelay(100);
}
static int setup_eqos(void)
{
struct iomuxc_gpr_base_regs *gpr =
(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
setup_iomux_eqos();
/* set INTF as RGMII, enable RGMII TXC clock */
clrsetbits_le32(&gpr->gpr[1],
IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK, BIT(16));
setbits_le32(&gpr->gpr[1], BIT(19) | BIT(21));
return set_clk_eqos(ENET_125MHZ);
}
#endif /* CONFIG_DWC_ETH_QOS */
int board_phy_config(struct phy_device *phydev)
{
if (IS_ENABLED(CONFIG_FEC_MXC) || IS_ENABLED(CONFIG_DWC_ETH_QOS)) {
/* enable rgmii rxc skew and phy mode select to RGMII copper */
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x00);
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x82ee);
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
if (phydev->drv->config)
phydev->drv->config(phydev);
}
return 0;
}
#define DISPMIX 13
#define MIPI 15
#define WDOG_TRIG IMX_GPIO_NR(4, 20)
static iomux_v3_cfg_t wdt_trig[] = {
MX8MP_PAD_SAI1_MCLK__GPIO4_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static void setup_iomux_wdt(void)
{
imx_iomux_v3_setup_multiple_pads(wdt_trig, ARRAY_SIZE(wdt_trig));
gpio_request(WDOG_TRIG, "wdt_trig");
gpio_direction_output(WDOG_TRIG, 1);
}
int board_init(void)
{
#ifdef CONFIG_FEC_MXC
setup_fec();
#endif
#ifdef CONFIG_DWC_ETH_QOS
/* clock, pin, gpr */
setup_eqos();
#endif
#ifdef CONFIG_NAND_MXS
setup_gpmi_nand();
#endif
setup_iomux_wdt();
return 0;
}
int board_late_init(void)
{
if (IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) {
env_set("board_name", "RSB3720A1");
env_set("board_rev", "iMX8MP");
}
return 0;
}
#ifdef CONFIG_SPL_MMC
#define UBOOT_RAW_SECTOR_OFFSET 0x40
unsigned long spl_mmc_get_uboot_raw_sector(struct mmc *mmc)
{
u32 boot_dev = spl_boot_device();
switch (boot_dev) {
case BOOT_DEVICE_MMC2:
return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - UBOOT_RAW_SECTOR_OFFSET;
default:
return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR;
}
}
#endif /* CONFIG_SPL_MMC */