mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 09:48:16 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
130 lines
3.7 KiB
C
130 lines
3.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* K+P iMX6Q KP_IMX6Q_TPC board configuration
|
|
*
|
|
* Copyright (C) 2018 Lukasz Majewski <lukma@denx.de>
|
|
*/
|
|
|
|
#ifndef __KP_IMX6Q_TPC_IMX6_CONFIG_H_
|
|
#define __KP_IMX6Q_TPC_IMX6_CONFIG_H_
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#include "mx6_common.h"
|
|
|
|
/* SPL */
|
|
#include "imx6_spl.h" /* common IMX6 SPL configuration */
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
#define CONFIG_REVISION_TAG
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (4 * SZ_1M)
|
|
|
|
/* FEC ethernet */
|
|
#define CONFIG_ARP_TIMEOUT 200UL
|
|
|
|
#define CONFIG_SYS_MMC_ENV_DEV 1 /* 0 = SDHC2, 1 = SDHC4 (eMMC) */
|
|
|
|
/* USB Configs */
|
|
#ifdef CONFIG_CMD_USB
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
#define CONFIG_USB_HOST_ETHER
|
|
#define CONFIG_USB_ETHER_ASIX
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
|
|
#endif
|
|
|
|
/* Watchdog */
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_LOADADDR 0x12000000
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"console=ttymxc0,115200\0" \
|
|
"fdt_addr=0x18000000\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"kernel_addr_r=0x10008000\0" \
|
|
"fdt_addr_r=0x13000000\0" \
|
|
"ramdisk_addr_r=0x18000000\0" \
|
|
"scriptaddr=0x14000000\0" \
|
|
"kernel_file=fitImage\0"\
|
|
"rdinit=/sbin/init\0" \
|
|
"addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \
|
|
"fit_config=mx6q_tpc70_conf\0" \
|
|
"uboot_file=u-boot.img\0" \
|
|
"SPL_file=SPL\0" \
|
|
"wic_file=kp-image-kpimx6qtpc.wic\0" \
|
|
"upd_image=st.4k\0" \
|
|
"updargs=setenv bootargs console=${console} ${smp} ${displayargs}\0" \
|
|
"initrd_ram_dev=/dev/ram\0" \
|
|
"addswupdate=setenv bootargs ${bootargs} root=${initrd_ram_dev} rw\0" \
|
|
"loadusb=usb start; " \
|
|
"fatload usb 0 ${loadaddr} ${upd_image}\0" \
|
|
"upd_uboot_sd=" \
|
|
"if tftp ${loadaddr} ${uboot_file}; then " \
|
|
"setexpr blkc ${filesize} / 0x200;" \
|
|
"setexpr blkc ${blkc} + 1;" \
|
|
"mmc write ${loadaddr} 0x8A ${blkc};" \
|
|
"fi;\0" \
|
|
"upd_SPL_sd=" \
|
|
"if tftp ${loadaddr} ${SPL_file}; then " \
|
|
"setexpr blkc ${filesize} / 0x200;" \
|
|
"setexpr blkc ${blkc} + 1;" \
|
|
"mmc write ${loadaddr} 0x2 ${blkc};" \
|
|
"fi;\0" \
|
|
"upd_SPL_mmc=mmc dev 1; mmc partconf 1 0 1 1; run upd_SPL_sd\0" \
|
|
"upd_uboot_mmc=mmc dev 1; mmc partconf 1 0 1 1; run upd_uboot_sd\0" \
|
|
"up_mmc=run upd_SPL_mmc; run upd_uboot_mmc\0" \
|
|
"up_sd=run upd_SPL_sd; run upd_uboot_sd\0" \
|
|
"upd_wic=" \
|
|
"if tftp ${loadaddr} ${wic_file}; then " \
|
|
"setexpr blkc ${filesize} / 0x200;" \
|
|
"setexpr blkc ${blkc} + 1;" \
|
|
"mmc write ${loadaddr} 0x0 ${blkc};" \
|
|
"fi;\0" \
|
|
"usbupd=echo Booting update from usb ...; " \
|
|
"setenv bootargs; " \
|
|
"run updargs; " \
|
|
"run addinitrd; " \
|
|
"run addswupdate; " \
|
|
"run loadusb; " \
|
|
"bootm ${loadaddr}#${fit_config}\0" \
|
|
BOOTENV
|
|
|
|
#define CONFIG_BOOTCOMMAND "run usbupd; run distro_bootcmd"
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 0) \
|
|
func(MMC, mmc, 1) \
|
|
func(USB, usb, 0) \
|
|
func(DHCP, dhcp, na)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
#endif
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* Environment */
|
|
|
|
#endif /* __KP_IMX6Q_TPC_IMX6_CONFIG_H_ */
|