u-boot/board/bf533-stamp/bf533-stamp.c
Simon Glass 5e41088364 bootstage: Convert progress numbers 10-19 to enums
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-03-18 20:59:53 +01:00

135 lines
3.5 KiB
C

/*
* U-boot - main board file
*
* Copyright (c) 2005-2008 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#include <common.h>
#include <netdev.h>
#include <asm/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
printf("Board: ADI BF533 Stamp board\n");
printf(" Support: http://blackfin.uclinux.org/\n");
return 0;
}
/* PF0 and PF1 are used to switch between the ethernet and flash:
* PF0 PF1
* flash: 0 0
* ether: 1 0
*/
void swap_to(int device_id)
{
gpio_request(GPIO_PF0, "eth_flash_swap");
gpio_request(GPIO_PF1, "eth_flash_swap");
gpio_direction_output(GPIO_PF0, device_id == ETHERNET);
gpio_direction_output(GPIO_PF1, 0);
SSYNC();
}
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
int misc_init_r(void)
{
#ifdef CONFIG_STAMP_CF
cf_ide_init();
#endif
return 0;
}
#endif
#ifdef CONFIG_SHOW_BOOT_PROGRESS
#define STATUS_LED_OFF 0
#define STATUS_LED_ON 1
static int gpio_setup;
static void stamp_led_set(int LED1, int LED2, int LED3)
{
if (!gpio_setup) {
gpio_request(GPIO_PF2, "boot_progress");
gpio_request(GPIO_PF3, "boot_progress");
gpio_request(GPIO_PF4, "boot_progress");
gpio_direction_output(GPIO_PF2, LED1);
gpio_direction_output(GPIO_PF3, LED2);
gpio_direction_output(GPIO_PF4, LED3);
gpio_setup = 1;
} else {
gpio_set_value(GPIO_PF2, LED1);
gpio_set_value(GPIO_PF3, LED2);
gpio_set_value(GPIO_PF4, LED3);
}
}
void show_boot_progress(int status)
{
switch (status) {
case BOOTSTAGE_ID_CHECK_MAGIC:
stamp_led_set(STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_ON);
break;
case BOOTSTAGE_ID_CHECK_HEADER:
stamp_led_set(STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_OFF);
break;
case BOOTSTAGE_ID_CHECK_CHECKSUM:
stamp_led_set(STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_ON);
break;
case BOOTSTAGE_ID_CHECK_ARCH:
stamp_led_set(STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_OFF);
break;
case BOOTSTAGE_ID_CHECK_IMAGETYPE:
case BOOTSTAGE_ID_DECOMP_IMAGE:
stamp_led_set(STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_ON);
break;
case BOOTSTAGE_ID_KERNEL_LOADED:
case BOOTSTAGE_ID_CHECK_BOOT_OS:
stamp_led_set(STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_OFF);
break;
case BOOTSTAGE_ID_BOOT_OS_RETURNED:
case BOOTSTAGE_ID_RD_MAGIC:
case BOOTSTAGE_ID_RD_HDR_CHECKSUM:
case BOOTSTAGE_ID_RD_CHECKSUM:
case BOOTSTAGE_ID_RAMDISK:
case BOOTSTAGE_ID_NO_RAMDISK:
case BOOTSTAGE_ID_RUN_OS:
stamp_led_set(STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_OFF);
break;
default:
stamp_led_set(STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_ON);
break;
}
}
#endif
#ifdef CONFIG_SMC91111
int board_eth_init(bd_t *bis)
{
return smc91111_initialize(0, CONFIG_SMC91111_BASE);
}
#endif