Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-05 02:51:00 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/sparc/cpu/leon3/start.S
Francois Retief 1e85ccec53 sparc: Update PROM initialization code for generic board 
Fixed the prom_relocate() function in start.S file by reserving memory in
the board_init_f sequence and saving the offset to the __prom_start_reloc
variable. This value is used as the destination when relocating the PROM.

Add the prom_init() function to the end of the board_init_r sequence.

Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-12-03 13:15:49 +02:00

681 lines
17 KiB
ArmAsm
Raw Blame History

/* This is where the SPARC/LEON3 starts
*
* Copyright (C) 2007, 2015
* Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm-offsets.h>
#include <config.h>
#include <asm/asmmacro.h>
#include <asm/winmacro.h>
#include <asm/psr.h>
#include <asm/stack.h>
#include <asm/leon.h>
#include <ambapp.h>
/* Default Plug&Play I/O area */
#ifndef CONFIG_AMBAPP_IOAREA
#define CONFIG_AMBAPP_IOAREA AMBA_DEFAULT_IOAREA
#endif
/* Default number of SPARC register windows */
#ifndef CONFIG_SYS_SPARC_NWINDOWS
#define CONFIG_SYS_SPARC_NWINDOWS 8
#endif
/* Entry for traps which jump to a programmer-specified trap handler. */
#define TRAPR(H) \
wr %g0, 0xfe0, %psr; \
mov %g0, %tbr; \
ba (H); \
mov %g0, %wim;
#define TRAP(H) \
mov %psr, %l0; \
ba (H); \
nop; nop;
#define TRAPI(ilevel) \
mov ilevel, %l7; \
mov %psr, %l0; \
b _irq_entry; \
mov %wim, %l3
/* Unexcpected trap will halt the processor by forcing it to error state */
#undef BAD_TRAP
#define BAD_TRAP ta 0; nop; nop; nop;
/* Software trap. Treat as BAD_TRAP for the time being... */
#define SOFT_TRAP TRAP(_hwerr)
#define PSR_INIT 0x1FC0 /* Disable traps, set s and ps */
#define WIM_INIT 2
/* All traps low-level code here must end with this macro. */
#define RESTORE_ALL b ret_trap_entry; clr %l6;
#define WRITE_PAUSE nop;nop;nop
WINDOWSIZE = (16 * 4)
ARGPUSHSIZE = (6 * 4)
ARGPUSH = (WINDOWSIZE + 4)
MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4)
/* Number of register windows */
#ifndef CONFIG_SYS_SPARC_NWINDOWS
#error Must define number of SPARC register windows, default is 8
#endif
/* Macros to load address into a register. Uses GOT table for PIC */
#ifdef __PIC__
#define SPARC_PIC_THUNK_CALL(reg) \
sethi %pc22(_GLOBAL_OFFSET_TABLE_-4), %##reg; \
call __sparc_get_pc_thunk.reg; \
add %##reg, %pc10(_GLOBAL_OFFSET_TABLE_+4), %##reg;
#define SPARC_LOAD_ADDRESS(sym, got, reg) \
sethi %gdop_hix22(sym), %##reg; \
xor %##reg, %gdop_lox10(sym), %##reg; \
ld [%##got + %##reg], %##reg, %gdop(sym);
#else
#define SPARC_PIC_THUNK_CALL(reg)
#define SPARC_LOAD_ADDRESS(sym, got, tmp) \
set sym, %##reg;
#endif
#define STACK_ALIGN 8
#define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1))
.section ".start", "ax"
.globl _start, start, _trap_table
.globl _irq_entry, nmi_trap
.globl _reset_reloc
/* at address 0
* Hardware traps
*/
start:
_start:
_trap_table:
TRAPR(_hardreset); ! 00 reset trap
BAD_TRAP; ! 01 instruction_access_exception
BAD_TRAP; ! 02 illegal_instruction
BAD_TRAP; ! 03 priveleged_instruction
BAD_TRAP; ! 04 fp_disabled
TRAP(_window_overflow); ! 05 window_overflow
TRAP(_window_underflow); ! 06 window_underflow
BAD_TRAP; ! 07 Memory Address Not Aligned
BAD_TRAP; ! 08 Floating Point Exception
BAD_TRAP; ! 09 Data Miss Exception
BAD_TRAP; ! 0a Tagged Instruction Ovrflw
BAD_TRAP; ! 0b Watchpoint Detected
BAD_TRAP; ! 0c
BAD_TRAP; ! 0d
BAD_TRAP; ! 0e
BAD_TRAP; ! 0f
BAD_TRAP; ! 10
TRAPI(1); ! 11 IRQ level 1
TRAPI(2); ! 12 IRQ level 2
TRAPI(3); ! 13 IRQ level 3
TRAPI(4); ! 14 IRQ level 4
TRAPI(5); ! 15 IRQ level 5
TRAPI(6); ! 16 IRQ level 6
TRAPI(7); ! 17 IRQ level 7
TRAPI(8); ! 18 IRQ level 8
TRAPI(9); ! 19 IRQ level 9
TRAPI(10); ! 1a IRQ level 10
TRAPI(11); ! 1b IRQ level 11
TRAPI(12); ! 1c IRQ level 12
TRAPI(13); ! 1d IRQ level 13
TRAPI(14); ! 1e IRQ level 14
TRAP(_nmi_trap); ! 1f IRQ level 15 /
! NMI (non maskable interrupt)
BAD_TRAP; ! 20 r_register_access_error
BAD_TRAP; ! 21 instruction access error
BAD_TRAP; ! 22
BAD_TRAP; ! 23
BAD_TRAP; ! 24 co-processor disabled
BAD_TRAP; ! 25 uniplemented FLUSH
BAD_TRAP; ! 26
BAD_TRAP; ! 27
BAD_TRAP; ! 28 co-processor exception
BAD_TRAP; ! 29 data access error
BAD_TRAP; ! 2a division by zero
BAD_TRAP; ! 2b data store error
BAD_TRAP; ! 2c data access MMU miss
BAD_TRAP; ! 2d
BAD_TRAP; ! 2e
BAD_TRAP; ! 2f
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 30-33
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 34-37
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 38-3b
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 3c-3f
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 40-43
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 44-47
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 48-4b
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 4c-4f
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 50-53
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 54-57
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 58-5b
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 5c-5f
/* implementaion dependent */
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 60-63
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 64-67
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 68-6b
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 6c-6f
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 70-73
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 74-77
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 78-7b
BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 7c-7f
/* Software traps, not handled */
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 80-83
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 84-87
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 88-8b
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 8c-8f
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 90-93
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 94-97
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 98-9b
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 9c-9f
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a0-a3
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a4-a7
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a8-ab
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! ac-af
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b0-b3
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b4-b7
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b8-bb
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! bc-bf
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c0-c3
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c4-c7
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c8-cb
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! cc-cf
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d0-d3
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d4-d7
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d8-db
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! dc-df
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e0-e3
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e4-e7
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e8-eb
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! ec-ef
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f0-f3
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f4-f7
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f8-fb
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! fc-ff
.section ".text"
.extern _nomem_amba_init, _nomem_memory_ctrl_init
.align 4
_hardreset:
1000:
flush
/* Enable I/D-Cache and Snooping */
set 0x0081000f, %g2
sta %g2, [%g0] 2
mov %g0, %y
clr %g1
clr %g2
clr %g3
clr %g4
clr %g5
clr %g6
clr %g7
mov %asr17, %g3
and %g3, 0x1f, %g3
clear_window:
mov %g0, %l0
mov %g0, %l1
mov %g0, %l2
mov %g0, %l3
mov %g0, %l4
mov %g0, %l5
mov %g0, %l6
mov %g0, %l7
mov %g0, %o0
mov %g0, %o1
mov %g0, %o2
mov %g0, %o3
mov %g0, %o4
mov %g0, %o5
mov %g0, %o6
mov %g0, %o7
subcc %g3, 1, %g3
bge clear_window
save
wiminit:
set WIM_INIT, %g3
mov %g3, %wim
stackinit:
set CONFIG_SYS_INIT_SP_OFFSET, %fp
andn %fp, 0x0f, %fp
sub %fp, 64, %sp
tbrinit:
set CONFIG_SYS_TEXT_BASE, %g2
wr %g0, %g2, %tbr
nop
nop
nop
/* Obtain the address of _GLOBAL_OFFSET_TABLE_ */
SPARC_PIC_THUNK_CALL(l7)
/* Scan AMBA Bus for AMBA buses using PnP information. All found
* AMBA buses I/O area will be located in i0-i5 upon return.
* The i0-i5 registers are later used by _nomem_amba_init2
*/
ambainit:
call _nomem_amba_init
sethi %hi(CONFIG_AMBAPP_IOAREA), %o0
/* Scan AMBA Buses for memory controllers, then initialize the
* memory controllers. Note that before setting up the memory controller
* the stack can not be used.
*/
memory_ctrl_init:
SPARC_LOAD_ADDRESS(grlib_mctrl_handlers, l7, o0)
call _nomem_memory_ctrl_init
nop
/* The return valu indicate how many memory controllers where found and
* initialized, if no memory controller was initialized, we can not continue
* because from here on we expect memory to be working.
*/
cmp %o0, 0
memory_ctrl_init_failed:
beq memory_ctrl_init_failed
nop
/*** From now on the stack can be used. ***/
cpu_init_unreloc:
call cpu_init_f
nop
board_init_unreloc:
call board_init_f
clr %o0 ! boot_flags
dead_unreloc:
mov 1, %g1 ! For GRMON2 to exit normally.
ta 0 ! If board_init_f call returns.. (unlikely)
nop
nop
ba dead_unreloc ! infinte loop
nop
!-------------------------------------------------------------------------------
/* void relocate_code (addr_sp, gd, addr_moni)
*
* This "function" does not return, instead it continues in RAM after
* relocating the monitor code.
*
* %o0 = Relocated stack pointer
* %o1 = Relocated global data pointer
* %o2 = Relocated text pointer
*
* %l7 = _GLOBAL_OFFSET_TABLE_ address
*/
.globl relocate_code
.type relocate_code, #function
.align 4
relocate_code:
!SPARC_PIC_THUNK_CALL(l7)
reloc:
SPARC_LOAD_ADDRESS(_text, l7, g2) ! start address of monitor
SPARC_LOAD_ADDRESS(__init_end, l7, g3) ! end address of monitor
mov %o2, %g4 ! relocation address
sub %g4, %g2, %g6 ! relocation offset
/* copy .text & .data to relocated address */
10: ldd [%g2], %l0
ldd [%g2+8], %l2
std %l0, [%g4]
std %l2, [%g4+8]
inc 16, %g2 ! src += 16
cmp %g2, %g3
bcs 10b ! while (src < end)
inc 16, %g4 ! dst += 16
clr %l0
clr %l1
clr %l2
clr %l3
clr %g2
/* register g4 contain address to start
* This means that BSS must be directly after data and code segments
*
* g3 is length of bss = (__bss_end-__bss_start)
*
*/
/* clear the relocated .bss area */
clr_bss:
SPARC_LOAD_ADDRESS(__bss_start, l7, g2)
SPARC_LOAD_ADDRESS(__bss_end, l7, g3)
sub %g3,%g2,%g3 ! length of .bss area
add %g3,%g4,%g3
/* clearing 16byte a time ==> linker script need to align to 16 byte offset */
clr %g1 /* std %g0 uses g0 and g1 */
20:
std %g0, [%g4]
std %g0, [%g4+8]
inc 16, %g4 ! ptr += 16
cmp %g4, %g3
bcs 20b ! while (ptr < end)
nop
/* add offsets to GOT table */
fixup_got:
SPARC_LOAD_ADDRESS(__got_start, l7, g4)
add %g4, %g6, %g4
SPARC_LOAD_ADDRESS(__got_end, l7, g3)
add %g3, %g6, %g3
30: ld [%g4], %l0
#ifdef CONFIG_RELOC_GOT_SKIP_NULL
cmp %l0, 0
be 32f
#endif
add %l0, %g6, %l0 ! relocate GOT pointer
st %l0, [%g4]
32: inc 4, %g4 ! ptr += 4
cmp %g4, %g3
bcs 30b ! while (ptr < end)
nop
prom_relocate:
SPARC_LOAD_ADDRESS(__prom_start, l7, g2)
SPARC_LOAD_ADDRESS(__prom_end, l7, g3)
/*
* Calculated addres is stored in this variable by
* reserve_prom() function in common/board_f.c
*/
SPARC_LOAD_ADDRESS(__prom_start_reloc, l7, g4)
ld [%g4], %g4
40: ldd [%g2], %l0
ldd [%g2+8], %l2
std %l0, [%g4]
std %l2, [%g4+8]
inc 16, %g2
cmp %g2, %g3
bcs 40b
inc 16, %g4
! %o0 = stack pointer (relocated)
! %o1 = global data pointer (relocated)
! %o2 = text pointer (relocated)
! %g6 = relocation offset
! %l7 = _GLOBAL_OFFSET_TABLE_
/* Trap table has been moved, lets tell CPU about
* the new trap table address
*/
update_trap_table_address:
wr %g0, %o2, %tbr
nop
nop
nop
update_stack_pointers:
mov %o0, %fp
andn %fp, 0x0f, %fp ! align to 16 bytes
add %fp, -64, %fp ! make space for a window push
mov %fp, %sp ! setup stack pointer
jump_board_init_r:
mov %o1, %o0 ! relocated global data pointer
mov %o2, %o1 ! relocated text pointer
SPARC_LOAD_ADDRESS(board_init_r, l7, o3)
add %o3, %g6, %o3 ! add relocation offset
call %o3
nop
dead:
mov 1, %g1 ! For GRMON2 to exit normally.
ta 0 ! if call returns.. (unlikely)
nop
b dead ! infinte loop
nop
!------------------------------------------------------------------------------
/* Interrupt handler caller,
* reg L7: interrupt number
* reg L0: psr after interrupt
* reg L1: PC
* reg L2: next PC
* reg L3: wim
*/
_irq_entry:
SAVE_ALL
or %l0, PSR_PIL, %g2
wr %g2, 0x0, %psr
WRITE_PAUSE
wr %g2, PSR_ET, %psr
WRITE_PAUSE
mov %l7, %o0 ! irq level
set handler_irq, %o1
set (CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE), %o2
add %o1, %o2, %o1
call %o1
add %sp, SF_REGS_SZ, %o1 ! pt_regs ptr
or %l0, PSR_PIL, %g2 ! restore PIL after handler_irq
wr %g2, PSR_ET, %psr ! keep ET up
WRITE_PAUSE
RESTORE_ALL
!------------------------------------------------------------------------------
/*
* Window overflow trap handler
*/
.global _window_overflow
_window_overflow:
mov %wim, %l3 ! Calculate next WIM
mov %g1, %l7
srl %l3, 1, %g1
sll %l3, (CONFIG_SYS_SPARC_NWINDOWS-1), %l4
or %g1, %l4, %g1
save ! Get into window to be saved.
mov %g1, %wim
nop; nop; nop
st %l0, [%sp + 0] ! Save window to the stack
st %l1, [%sp + 4]
st %l2, [%sp + 8]
st %l3, [%sp + 12]
st %l4, [%sp + 16]
st %l5, [%sp + 20]
st %l6, [%sp + 24]
st %l7, [%sp + 28]
st %i0, [%sp + 32]
st %i1, [%sp + 36]
st %i2, [%sp + 40]
st %i3, [%sp + 44]
st %i4, [%sp + 48]
st %i5, [%sp + 52]
st %i6, [%sp + 56]
st %i7, [%sp + 60]
restore ! Go back to trap window.
mov %l7, %g1
jmp %l1 ! Re-execute save.
rett %l2
/*
* Window underflow trap handler
*/
.global _window_underflow
_window_underflow:
mov %wim, %l3 ! Calculate next WIM
srl %l3, (CONFIG_SYS_SPARC_NWINDOWS-1), %l5
sll %l3, 1, %l4
or %l5, %l4, %l5
mov %l5, %wim
nop; nop; nop
restore ! Two restores to get into the
restore ! window to restore
ld [%sp + 0], %l0; ! Restore window from the stack
ld [%sp + 4], %l1;
ld [%sp + 8], %l2;
ld [%sp + 12], %l3;
ld [%sp + 16], %l4;
ld [%sp + 20], %l5;
ld [%sp + 24], %l6;
ld [%sp + 28], %l7;
ld [%sp + 32], %i0;
ld [%sp + 36], %i1;
ld [%sp + 40], %i2;
ld [%sp + 44], %i3;
ld [%sp + 48], %i4;
ld [%sp + 52], %i5;
ld [%sp + 56], %i6;
ld [%sp + 60], %i7;
save ! Get back to the trap window.
save
jmp %l1 ! Re-execute restore.
rett %l2
!------------------------------------------------------------------------------
_nmi_trap:
nop
jmp %l1
rett %l2
_hwerr:
ta 0
nop
nop
b _hwerr ! loop infinite
nop
/* Registers to not touch at all. */
#define t_psr l0 /* Set by caller */
#define t_pc l1 /* Set by caller */
#define t_npc l2 /* Set by caller */
#define t_wim l3 /* Set by caller */
#define t_twinmask l4 /* Set at beginning of this entry routine. */
#define t_kstack l5 /* Set right before pt_regs frame is built */
#define t_retpc l6 /* If you change this, change winmacro.h header file */
#define t_systable l7 /* Never touch this, could be the syscall table ptr. */
#define curptr g6 /* Set after pt_regs frame is built */
trap_setup:
/* build a pt_regs trap frame. */
sub %fp, (SF_REGS_SZ + PT_REGS_SZ), %t_kstack
PT_STORE_ALL(t_kstack, t_psr, t_pc, t_npc, g2)
/* See if we are in the trap window. */
mov 1, %t_twinmask
sll %t_twinmask, %t_psr, %t_twinmask ! t_twinmask = (1 << psr)
andcc %t_twinmask, %t_wim, %g0
beq 1f ! in trap window, clean up
nop
/*-------------------------------------------------
* Spill , adjust %wim and go.
*/
srl %t_wim, 0x1, %g2 ! begin computation of new %wim
set (CONFIG_SYS_SPARC_NWINDOWS-1), %g3 !NWINDOWS-1
sll %t_wim, %g3, %t_wim ! NWINDOWS-1
or %t_wim, %g2, %g2
and %g2, 0xff, %g2
save %g0, %g0, %g0 ! get in window to be saved
/* Set new %wim value */
wr %g2, 0x0, %wim
/* Save the kernel window onto the corresponding stack. */
RW_STORE(sp)
restore %g0, %g0, %g0
/*-------------------------------------------------*/
1:
/* Trap from kernel with a window available.
* Just do it...
*/
jmpl %t_retpc + 0x8, %g0 ! return to caller
mov %t_kstack, %sp ! jump onto new stack
#define twin_tmp1 l4
#define glob_tmp g4
#define curptr g6
ret_trap_entry:
wr %t_psr, 0x0, %psr ! enable nesting again, clear ET
/* Will the rett land us in the invalid window? */
mov 2, %g1
sll %g1, %t_psr, %g1
set CONFIG_SYS_SPARC_NWINDOWS, %g2 !NWINDOWS
srl %g1, %g2, %g2
or %g1, %g2, %g1
rd %wim, %g2
andcc %g2, %g1, %g0
be 1f ! Nope, just return from the trap
sll %g2, 0x1, %g1
/* We have to grab a window before returning. */
set (CONFIG_SYS_SPARC_NWINDOWS-1), %g3 !NWINDOWS-1
srl %g2, %g3, %g2
or %g1, %g2, %g1
and %g1, 0xff, %g1
wr %g1, 0x0, %wim
/* Grrr, make sure we load from the right %sp... */
PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1)
restore %g0, %g0, %g0
RW_LOAD(sp)
b 2f
save %g0, %g0, %g0
/* Reload the entire frame in case this is from a
* kernel system call or whatever...
*/
1:
PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1)
2:
wr %t_psr, 0x0, %psr
nop;
nop;
nop
jmp %t_pc
rett %t_npc
/* This is called from relocated C-code.
* It resets the system by jumping to _start
*/
_reset_reloc:
set start, %l0
call %l0
nop
Reference in a new issue View git blame Copy permalink