u-boot/arch/arm/cpu/armv7/keystone/ddr3.c
Murali Karicheri 6c343825dd ARM: keystone: ddr3: workaround for ddr3a/3b memory issue
This patch implements a workaround to fix DDR3 memory issue.
The code for workaround detects PGSR0 errors and then preps for
and executes a software-controlled hard reset.In board_early_init,
where logic has been added to identify whether or not the previous
reset was a PORz. PLL initialization is skipped in the case of a
software-controlled hard reset.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Keegan Garcia <kgarcia@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-09-17 21:06:56 -04:00

163 lines
4.8 KiB
C

/*
* Keystone2: DDR3 initialization
*
* (C) Copyright 2012-2014
* Texas Instruments Incorporated, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/io.h>
#include <common.h>
#include <asm/arch/ddr3.h>
#include <asm/arch/psc_defs.h>
void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg)
{
unsigned int tmp;
while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET)
& 0x00000001) != 0x00000001)
;
__raw_writel(phy_cfg->pllcr, base + KS2_DDRPHY_PLLCR_OFFSET);
tmp = __raw_readl(base + KS2_DDRPHY_PGCR1_OFFSET);
tmp &= ~(phy_cfg->pgcr1_mask);
tmp |= phy_cfg->pgcr1_val;
__raw_writel(tmp, base + KS2_DDRPHY_PGCR1_OFFSET);
__raw_writel(phy_cfg->ptr0, base + KS2_DDRPHY_PTR0_OFFSET);
__raw_writel(phy_cfg->ptr1, base + KS2_DDRPHY_PTR1_OFFSET);
__raw_writel(phy_cfg->ptr3, base + KS2_DDRPHY_PTR3_OFFSET);
__raw_writel(phy_cfg->ptr4, base + KS2_DDRPHY_PTR4_OFFSET);
tmp = __raw_readl(base + KS2_DDRPHY_DCR_OFFSET);
tmp &= ~(phy_cfg->dcr_mask);
tmp |= phy_cfg->dcr_val;
__raw_writel(tmp, base + KS2_DDRPHY_DCR_OFFSET);
__raw_writel(phy_cfg->dtpr0, base + KS2_DDRPHY_DTPR0_OFFSET);
__raw_writel(phy_cfg->dtpr1, base + KS2_DDRPHY_DTPR1_OFFSET);
__raw_writel(phy_cfg->dtpr2, base + KS2_DDRPHY_DTPR2_OFFSET);
__raw_writel(phy_cfg->mr0, base + KS2_DDRPHY_MR0_OFFSET);
__raw_writel(phy_cfg->mr1, base + KS2_DDRPHY_MR1_OFFSET);
__raw_writel(phy_cfg->mr2, base + KS2_DDRPHY_MR2_OFFSET);
__raw_writel(phy_cfg->dtcr, base + KS2_DDRPHY_DTCR_OFFSET);
__raw_writel(phy_cfg->pgcr2, base + KS2_DDRPHY_PGCR2_OFFSET);
__raw_writel(phy_cfg->zq0cr1, base + KS2_DDRPHY_ZQ0CR1_OFFSET);
__raw_writel(phy_cfg->zq1cr1, base + KS2_DDRPHY_ZQ1CR1_OFFSET);
__raw_writel(phy_cfg->zq2cr1, base + KS2_DDRPHY_ZQ2CR1_OFFSET);
__raw_writel(phy_cfg->pir_v1, base + KS2_DDRPHY_PIR_OFFSET);
while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1)
;
__raw_writel(phy_cfg->pir_v2, base + KS2_DDRPHY_PIR_OFFSET);
while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1)
;
}
void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg)
{
__raw_writel(emif_cfg->sdcfg, base + KS2_DDR3_SDCFG_OFFSET);
__raw_writel(emif_cfg->sdtim1, base + KS2_DDR3_SDTIM1_OFFSET);
__raw_writel(emif_cfg->sdtim2, base + KS2_DDR3_SDTIM2_OFFSET);
__raw_writel(emif_cfg->sdtim3, base + KS2_DDR3_SDTIM3_OFFSET);
__raw_writel(emif_cfg->sdtim4, base + KS2_DDR3_SDTIM4_OFFSET);
__raw_writel(emif_cfg->zqcfg, base + KS2_DDR3_ZQCFG_OFFSET);
__raw_writel(emif_cfg->sdrfc, base + KS2_DDR3_SDRFC_OFFSET);
}
void ddr3_reset_ddrphy(void)
{
u32 tmp;
/* Assert DDR3A PHY reset */
tmp = readl(KS2_DDR3APLLCTL1);
tmp |= KS2_DDR3_PLLCTRL_PHY_RESET;
writel(tmp, KS2_DDR3APLLCTL1);
/* wait 10us to catch the reset */
udelay(10);
/* Release DDR3A PHY reset */
tmp = readl(KS2_DDR3APLLCTL1);
tmp &= ~KS2_DDR3_PLLCTRL_PHY_RESET;
__raw_writel(tmp, KS2_DDR3APLLCTL1);
}
#ifdef CONFIG_SOC_K2HK
/**
* ddr3_reset_workaround - reset workaround in case if leveling error
* detected for PG 1.0 and 1.1 k2hk SoCs
*/
void ddr3_err_reset_workaround(void)
{
unsigned int tmp;
unsigned int tmp_a;
unsigned int tmp_b;
/*
* Check for PGSR0 error bits of DDR3 PHY.
* Check for WLERR, QSGERR, WLAERR,
* RDERR, WDERR, REERR, WEERR error to see if they are set or not
*/
tmp_a = __raw_readl(KS2_DDR3A_DDRPHYC + KS2_DDRPHY_PGSR0_OFFSET);
tmp_b = __raw_readl(KS2_DDR3B_DDRPHYC + KS2_DDRPHY_PGSR0_OFFSET);
if (((tmp_a & 0x0FE00000) != 0) || ((tmp_b & 0x0FE00000) != 0)) {
printf("DDR Leveling Error Detected!\n");
printf("DDR3A PGSR0 = 0x%x\n", tmp_a);
printf("DDR3B PGSR0 = 0x%x\n", tmp_b);
/*
* Write Keys to KICK registers to enable writes to registers
* in boot config space
*/
__raw_writel(KS2_KICK0_MAGIC, KS2_KICK0);
__raw_writel(KS2_KICK1_MAGIC, KS2_KICK1);
/*
* Move DDR3A Module out of reset isolation by setting
* MDCTL23[12] = 0
*/
tmp_a = __raw_readl(KS2_PSC_BASE +
PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3A));
tmp_a = PSC_REG_MDCTL_SET_RESET_ISO(tmp_a, 0);
__raw_writel(tmp_a, KS2_PSC_BASE +
PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3A));
/*
* Move DDR3B Module out of reset isolation by setting
* MDCTL24[12] = 0
*/
tmp_b = __raw_readl(KS2_PSC_BASE +
PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3B));
tmp_b = PSC_REG_MDCTL_SET_RESET_ISO(tmp_b, 0);
__raw_writel(tmp_b, KS2_PSC_BASE +
PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3B));
/*
* Write 0x5A69 Key to RSTCTRL[15:0] to unlock writes
* to RSTCTRL and RSTCFG
*/
tmp = __raw_readl(KS2_RSTCTRL);
tmp &= KS2_RSTCTRL_MASK;
tmp |= KS2_RSTCTRL_KEY;
__raw_writel(tmp, KS2_RSTCTRL);
/*
* Set PLL Controller to drive hard reset on SW trigger by
* setting RSTCFG[13] = 0
*/
tmp = __raw_readl(KS2_RSTCTRL_RSCFG);
tmp &= ~KS2_RSTYPE_PLL_SOFT;
__raw_writel(tmp, KS2_RSTCTRL_RSCFG);
reset_cpu(0);
}
}
#endif