u-boot/arch/arm/include/asm/arch-pxa/hardware.h
Peter Tyser 819833af39 Move architecture-specific includes to arch/$ARCH/include/asm
This helps to clean up the include/ directory so that it only contains
non-architecture-specific headers and also matches Linux's directory
layout which many U-Boot developers are already familiar with.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-04-13 09:13:12 +02:00

158 lines
3.7 KiB
C

/*
* linux/include/asm-arm/arch-pxa/hardware.h
*
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Note: This file was taken from linux-2.4.19-rmk4-pxa1
*
* - 2003/01/20 implementation specifics activated
* Robert Schwebel <r.schwebel@pengutronix.de>
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <linux/config.h>
#include <asm/mach-types.h>
/*
* These are statically mapped PCMCIA IO space for designs using it as a
* generic IO bus, typically with ISA parts, hardwired IDE interfaces, etc.
* The actual PCMCIA code is mapping required IO region at run time.
*/
#define PCMCIA_IO_0_BASE 0xf6000000
#define PCMCIA_IO_1_BASE 0xf7000000
/*
* We requires absolute addresses.
*/
#define PCIO_BASE 0
/*
* Workarounds for at least 2 errata so far require this.
* The mapping is set in mach-pxa/generic.c.
*/
#define UNCACHED_PHYS_0 0xff000000
#define UNCACHED_ADDR UNCACHED_PHYS_0
/*
* Intel PXA internal I/O mappings:
*
* 0x40000000 - 0x41ffffff <--> 0xf8000000 - 0xf9ffffff
* 0x44000000 - 0x45ffffff <--> 0xfa000000 - 0xfbffffff
* 0x48000000 - 0x49ffffff <--> 0xfc000000 - 0xfdffffff
*/
/* FIXME: Only this does work for u-boot... find out why... [RS] */
#define UBOOT_REG_FIX 1
#ifndef UBOOT_REG_FIX
#ifndef __ASSEMBLY__
#define io_p2v(x) ( ((x) | 0xbe000000) ^ (~((x) >> 1) & 0x06000000) )
#define io_v2p( x ) ( ((x) & 0x41ffffff) ^ ( ((x) & 0x06000000) << 1) )
/*
* This __REG() version gives the same results as the one above, except
* that we are fooling gcc somehow so it generates far better and smaller
* assembly code for access to contigous registers. It's a shame that gcc
* doesn't guess this by itself.
*/
#include <asm/types.h>
typedef struct { volatile u32 offset[4096]; } __regbase;
# define __REGP(x) ((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
# define __REG(x) __REGP(io_p2v(x))
#endif
/* Let's kick gcc's ass again... */
# define __REG2(x,y) \
( __builtin_constant_p(y) ? (__REG((x) + (y))) \
: (*(volatile u32 *)((u32)&__REG(x) + (y))) )
# define __PREG(x) (io_v2p((u32)&(x)))
#else
# define __REG(x) io_p2v(x)
# define __PREG(x) io_v2p(x)
# undef io_p2v
# undef __REG
# ifndef __ASSEMBLY__
# define io_p2v(PhAdd) (PhAdd)
# define __REG(x) (*((volatile u32 *)io_p2v(x)))
# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
# else
# define __REG(x) (x)
# ifdef CONFIG_CPU_MONAHANS /* Hack to make this work with mona's pxa-regs.h */
# define __REG_2(x) (x)
# define __REG_3(x) (x)
# endif
# endif
#endif /* UBOOT_REG_FIX */
#include "pxa-regs.h"
#ifndef __ASSEMBLY__
/*
* GPIO edge detection for IRQs:
* IRQs are generated on Falling-Edge, Rising-Edge, or both.
* This must be called *before* the corresponding IRQ is registered.
* Use this instead of directly setting GRER/GFER.
*/
#define GPIO_FALLING_EDGE 1
#define GPIO_RISING_EDGE 2
#define GPIO_BOTH_EDGES 3
extern void set_GPIO_IRQ_edge( int gpio_nr, int edge_mask );
/*
* Handy routine to set GPIO alternate functions
*/
extern void set_GPIO_mode( int gpio_mode );
/*
* return current lclk frequency in units of 10kHz
*/
extern unsigned int get_lclk_frequency_10khz(void);
#endif
/*
* Implementation specifics
*/
#ifdef CONFIG_ARCH_LUBBOCK
#include "lubbock.h"
#endif
#ifdef CONFIG_ARCH_PXA_IDP
#include "idp.h"
#endif
#ifdef CONFIG_ARCH_PXA_CERF
#include "cerf.h"
#endif
#ifdef CONFIG_ARCH_CSB226
#include "csb226.h"
#endif
#ifdef CONFIG_ARCH_INNOKOM
#include "innokom.h"
#endif
#ifdef CONFIG_ARCH_PLEB
#include "pleb.h"
#endif
#endif /* _ASM_ARCH_HARDWARE_H */