u-boot/configs/tbs2910_defconfig
Soeren Moch 4516b535bf board: tbs2910: Disable CONFIG_ENV_VARS_UBOOT_CONFIG in defconfig
This is not required for sysboot (we defined fdtfile), let's save a few
bytes in the binary image without these variables.

Signed-off-by: Soeren Moch <smoch@web.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-09-18 10:39:43 +02:00

111 lines
2.8 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x17800000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x60000
CONFIG_MX6Q=y
CONFIG_TARGET_TBS2910=y
CONFIG_DM_GPIO=y
CONFIG_PRE_CON_BUF_ADDR=0x7c000000
CONFIG_CMD_HDMIDETECT=y
CONFIG_DEFAULT_DEVICE_TREE="imx6q-tbs2910"
CONFIG_AHCI=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc || run distro_bootcmd; fi"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start; if hdmidet; then run set_con_hdmi; else run set_con_serial; fi"
CONFIG_PRE_CONSOLE_BUFFER=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DEFAULT_FDT_FILE="imx6q-tbs2910.dtb"
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Matrix U-Boot> "
# CONFIG_CMD_BDI is not set
CONFIG_CMD_BOOTZ=y
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_FDT is not set
CONFIG_CMD_MEMTEST=y
CONFIG_SYS_MEMTEST_START=0x10000000
CONFIG_SYS_MEMTEST_END=0x2f400000
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
CONFIG_CMD_PCI=y
CONFIG_CMD_SATA=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_SYSBOOT=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_EFI_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_OF_DTB_PROPS_REMOVE=y
CONFIG_OF_REMOVE_PROPS="dmas dma-names interrupt-parent interrupts interrupts-extended interrupt-names interrupt-map interrupt-map-mask"
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_DEV=2
CONFIG_SYS_MMC_ENV_PART=1
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_DM_KEYBOARD=y
CONFIG_DM_MMC=y
CONFIG_FSL_USDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_ATHEROS=y
CONFIG_DM_ETH=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
# CONFIG_PCI_PNP is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_DM_RTC=y
CONFIG_RTC_DS1307=y
CONFIG_MXC_UART=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="TBS"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_DM_VIDEO=y
# CONFIG_BACKLIGHT is not set
# CONFIG_CMD_VIDCONSOLE is not set
# CONFIG_VIDEO_BPP8 is not set
# CONFIG_VIDEO_BPP32 is not set
# CONFIG_VIDEO_ANSI is not set
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDCONSOLE_AS_LCD=y
CONFIG_I2C_EDID=y
CONFIG_VIDEO_IPUV3=y
# CONFIG_GZIP is not set
CONFIG_OF_LIBFDT_ASSUME_MASK=0xff
# CONFIG_EFI_LOADER is not set