mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 05:04:26 +00:00
767aa16d41
Rename amba to AXI. Based on Xilinx Zynq TRM (Chapter 5) chip is "AXI point-to-point channels for communicating addresses, data, and response transactions between master and slave clients. This ARM AMBA 3.0..." Issues are reported as: .. amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' >From schema: ../github.com/devicetree-org/dt-schema/dtschema/schemas/simple-bus.yaml Similar change has been done for Xilinx ZynqMP SoC. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/8a4bc80debfbb79c296e76fc1e4c173e62657286.1606397101.git.michal.simek@xilinx.com
554 lines
13 KiB
Text
554 lines
13 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Xilinx Zynq 7000 DTSI
|
|
* Describes the hardware common to all Zynq 7000-based boards.
|
|
*
|
|
* Copyright (C) 2011 - 2015 Xilinx
|
|
*/
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "xlnx,zynq-7000";
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
clocks = <&clkc 3>;
|
|
clock-latency = <1000>;
|
|
cpu0-supply = <®ulator_vccpint>;
|
|
operating-points = <
|
|
/* kHz uV */
|
|
666667 1000000
|
|
333334 1000000
|
|
>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
clocks = <&clkc 3>;
|
|
};
|
|
};
|
|
|
|
fpga_full: fpga-full {
|
|
compatible = "fpga-region";
|
|
fpga-mgr = <&devcfg>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
};
|
|
|
|
pmu@f8891000 {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts = <0 5 4>, <0 6 4>;
|
|
interrupt-parent = <&intc>;
|
|
reg = <0xf8891000 0x1000>,
|
|
<0xf8893000 0x1000>;
|
|
};
|
|
|
|
regulator_vccpint: fixedregulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VCCPINT";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
replicator {
|
|
compatible = "arm,coresight-static-replicator";
|
|
clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
|
|
clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
|
|
|
|
out-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* replicator output ports */
|
|
port@0 {
|
|
reg = <0>;
|
|
replicator_out_port0: endpoint {
|
|
remote-endpoint = <&tpiu_in_port>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
replicator_out_port1: endpoint {
|
|
remote-endpoint = <&etb_in_port>;
|
|
};
|
|
};
|
|
};
|
|
in-ports {
|
|
/* replicator input port */
|
|
port {
|
|
replicator_in_port0: endpoint {
|
|
remote-endpoint = <&funnel_out_port>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
amba: axi {
|
|
u-boot,dm-pre-reloc;
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&intc>;
|
|
ranges;
|
|
|
|
adc: adc@f8007100 {
|
|
compatible = "xlnx,zynq-xadc-1.00.a";
|
|
reg = <0xf8007100 0x20>;
|
|
interrupts = <0 7 4>;
|
|
interrupt-parent = <&intc>;
|
|
clocks = <&clkc 12>;
|
|
};
|
|
|
|
can0: can@e0008000 {
|
|
compatible = "xlnx,zynq-can-1.0";
|
|
status = "disabled";
|
|
clocks = <&clkc 19>, <&clkc 36>;
|
|
clock-names = "can_clk", "pclk";
|
|
reg = <0xe0008000 0x1000>;
|
|
interrupts = <0 28 4>;
|
|
interrupt-parent = <&intc>;
|
|
tx-fifo-depth = <0x40>;
|
|
rx-fifo-depth = <0x40>;
|
|
};
|
|
|
|
can1: can@e0009000 {
|
|
compatible = "xlnx,zynq-can-1.0";
|
|
status = "disabled";
|
|
clocks = <&clkc 20>, <&clkc 37>;
|
|
clock-names = "can_clk", "pclk";
|
|
reg = <0xe0009000 0x1000>;
|
|
interrupts = <0 51 4>;
|
|
interrupt-parent = <&intc>;
|
|
tx-fifo-depth = <0x40>;
|
|
rx-fifo-depth = <0x40>;
|
|
};
|
|
|
|
gpio0: gpio@e000a000 {
|
|
compatible = "xlnx,zynq-gpio-1.0";
|
|
#gpio-cells = <2>;
|
|
clocks = <&clkc 42>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 20 4>;
|
|
reg = <0xe000a000 0x1000>;
|
|
};
|
|
|
|
i2c0: i2c@e0004000 {
|
|
compatible = "cdns,i2c-r1p10";
|
|
status = "disabled";
|
|
clocks = <&clkc 38>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 25 4>;
|
|
reg = <0xe0004000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c1: i2c@e0005000 {
|
|
compatible = "cdns,i2c-r1p10";
|
|
status = "disabled";
|
|
clocks = <&clkc 39>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 48 4>;
|
|
reg = <0xe0005000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
intc: interrupt-controller@f8f01000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0xF8F01000 0x1000>,
|
|
<0xF8F00100 0x100>;
|
|
};
|
|
|
|
L2: cache-controller@f8f02000 {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0xF8F02000 0x1000>;
|
|
interrupts = <0 2 4>;
|
|
arm,data-latency = <3 2 2>;
|
|
arm,tag-latency = <2 2 2>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
mc: memory-controller@f8006000 {
|
|
compatible = "xlnx,zynq-ddrc-a05";
|
|
reg = <0xf8006000 0x1000>;
|
|
};
|
|
|
|
uart0: serial@e0000000 {
|
|
compatible = "xlnx,xuartps", "cdns,uart-r1p8";
|
|
status = "disabled";
|
|
clocks = <&clkc 23>, <&clkc 40>;
|
|
clock-names = "uart_clk", "pclk";
|
|
reg = <0xE0000000 0x1000>;
|
|
interrupts = <0 27 4>;
|
|
};
|
|
|
|
uart1: serial@e0001000 {
|
|
compatible = "xlnx,xuartps", "cdns,uart-r1p8";
|
|
status = "disabled";
|
|
clocks = <&clkc 24>, <&clkc 41>;
|
|
clock-names = "uart_clk", "pclk";
|
|
reg = <0xE0001000 0x1000>;
|
|
interrupts = <0 50 4>;
|
|
};
|
|
|
|
spi0: spi@e0006000 {
|
|
compatible = "xlnx,zynq-spi-r1p6";
|
|
reg = <0xe0006000 0x1000>;
|
|
status = "disabled";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 26 4>;
|
|
clocks = <&clkc 25>, <&clkc 34>;
|
|
clock-names = "ref_clk", "pclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spi1: spi@e0007000 {
|
|
compatible = "xlnx,zynq-spi-r1p6";
|
|
reg = <0xe0007000 0x1000>;
|
|
status = "disabled";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 49 4>;
|
|
clocks = <&clkc 26>, <&clkc 35>;
|
|
clock-names = "ref_clk", "pclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
qspi: spi@e000d000 {
|
|
clock-names = "ref_clk", "pclk";
|
|
clocks = <&clkc 10>, <&clkc 43>;
|
|
compatible = "xlnx,zynq-qspi-1.0";
|
|
status = "disabled";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 19 4>;
|
|
reg = <0xe000d000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
smcc: memory-controller@e000e000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
status = "disabled";
|
|
clock-names = "memclk", "apb_pclk";
|
|
clocks = <&clkc 11>, <&clkc 44>;
|
|
compatible = "arm,pl353-smc-r2p1", "arm,primecell";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 18 4>;
|
|
ranges ;
|
|
reg = <0xe000e000 0x1000>;
|
|
nand0: flash@e1000000 {
|
|
status = "disabled";
|
|
compatible = "arm,pl353-nand-r2p1";
|
|
reg = <0xe1000000 0x1000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
nor0: flash@e2000000 {
|
|
status = "disabled";
|
|
compatible = "cfi-flash";
|
|
reg = <0xe2000000 0x2000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
|
|
gem0: ethernet@e000b000 {
|
|
compatible = "cdns,zynq-gem", "cdns,gem";
|
|
reg = <0xe000b000 0x1000>;
|
|
status = "disabled";
|
|
interrupts = <0 22 4>;
|
|
clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
|
|
clock-names = "pclk", "hclk", "tx_clk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
gem1: ethernet@e000c000 {
|
|
compatible = "cdns,zynq-gem", "cdns,gem";
|
|
reg = <0xe000c000 0x1000>;
|
|
status = "disabled";
|
|
interrupts = <0 45 4>;
|
|
clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
|
|
clock-names = "pclk", "hclk", "tx_clk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
sdhci0: mmc@e0100000 {
|
|
compatible = "arasan,sdhci-8.9a";
|
|
status = "disabled";
|
|
clock-names = "clk_xin", "clk_ahb";
|
|
clocks = <&clkc 21>, <&clkc 32>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 24 4>;
|
|
reg = <0xe0100000 0x1000>;
|
|
};
|
|
|
|
sdhci1: mmc@e0101000 {
|
|
compatible = "arasan,sdhci-8.9a";
|
|
status = "disabled";
|
|
clock-names = "clk_xin", "clk_ahb";
|
|
clocks = <&clkc 22>, <&clkc 33>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 47 4>;
|
|
reg = <0xe0101000 0x1000>;
|
|
};
|
|
|
|
slcr: slcr@f8000000 {
|
|
u-boot,dm-pre-reloc;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
|
|
reg = <0xF8000000 0x1000>;
|
|
ranges;
|
|
clkc: clkc@100 {
|
|
u-boot,dm-pre-reloc;
|
|
#clock-cells = <1>;
|
|
compatible = "xlnx,ps7-clkc";
|
|
fclk-enable = <0>;
|
|
clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
|
|
"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
|
|
"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
|
|
"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
|
|
"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
|
|
"dma", "usb0_aper", "usb1_aper", "gem0_aper",
|
|
"gem1_aper", "sdio0_aper", "sdio1_aper",
|
|
"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
|
|
"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
|
|
"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
|
|
"dbg_trc", "dbg_apb";
|
|
reg = <0x100 0x100>;
|
|
};
|
|
|
|
rstc: rstc@200 {
|
|
compatible = "xlnx,zynq-reset";
|
|
reg = <0x200 0x48>;
|
|
#reset-cells = <1>;
|
|
syscon = <&slcr>;
|
|
};
|
|
|
|
pinctrl0: pinctrl@700 {
|
|
compatible = "xlnx,pinctrl-zynq";
|
|
reg = <0x700 0x200>;
|
|
syscon = <&slcr>;
|
|
};
|
|
};
|
|
|
|
dmac_s: dmac@f8003000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0xf8003000 0x1000>;
|
|
interrupt-parent = <&intc>;
|
|
interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
|
|
"dma4", "dma5", "dma6", "dma7";
|
|
interrupts = <0 13 4>,
|
|
<0 14 4>, <0 15 4>,
|
|
<0 16 4>, <0 17 4>,
|
|
<0 40 4>, <0 41 4>,
|
|
<0 42 4>, <0 43 4>;
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <4>;
|
|
clocks = <&clkc 27>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
devcfg: devcfg@f8007000 {
|
|
compatible = "xlnx,zynq-devcfg-1.0";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 8 4>;
|
|
reg = <0xf8007000 0x100>;
|
|
clocks = <&clkc 12>, <&clkc 15>, <&clkc 16>, <&clkc 17>, <&clkc 18>;
|
|
clock-names = "ref_clk", "fclk0", "fclk1", "fclk2", "fclk3";
|
|
syscon = <&slcr>;
|
|
};
|
|
|
|
efuse: efuse@f800d000 {
|
|
compatible = "xlnx,zynq-efuse";
|
|
reg = <0xf800d000 0x20>;
|
|
};
|
|
|
|
global_timer: timer@f8f00200 {
|
|
compatible = "arm,cortex-a9-global-timer";
|
|
reg = <0xf8f00200 0x20>;
|
|
interrupts = <1 11 0x301>;
|
|
interrupt-parent = <&intc>;
|
|
clocks = <&clkc 4>;
|
|
};
|
|
|
|
ttc0: timer@f8001000 {
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
|
|
compatible = "cdns,ttc";
|
|
clocks = <&clkc 6>;
|
|
reg = <0xF8001000 0x1000>;
|
|
};
|
|
|
|
ttc1: timer@f8002000 {
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
|
|
compatible = "cdns,ttc";
|
|
clocks = <&clkc 6>;
|
|
reg = <0xF8002000 0x1000>;
|
|
};
|
|
|
|
scutimer: timer@f8f00600 {
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <1 13 0x301>;
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0xf8f00600 0x20>;
|
|
clocks = <&clkc 4>;
|
|
};
|
|
|
|
usb0: usb@e0002000 {
|
|
compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
|
|
status = "disabled";
|
|
clocks = <&clkc 28>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 21 4>;
|
|
reg = <0xe0002000 0x1000>;
|
|
phy_type = "ulpi";
|
|
};
|
|
|
|
usb1: usb@e0003000 {
|
|
compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
|
|
status = "disabled";
|
|
clocks = <&clkc 29>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 44 4>;
|
|
reg = <0xe0003000 0x1000>;
|
|
phy_type = "ulpi";
|
|
};
|
|
|
|
watchdog0: watchdog@f8005000 {
|
|
clocks = <&clkc 45>;
|
|
compatible = "cdns,wdt-r1p2";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 9 1>;
|
|
reg = <0xf8005000 0x1000>;
|
|
timeout-sec = <10>;
|
|
};
|
|
|
|
etb@f8801000 {
|
|
compatible = "arm,coresight-etb10", "arm,primecell";
|
|
reg = <0xf8801000 0x1000>;
|
|
clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
|
|
clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
|
|
in-ports {
|
|
port {
|
|
etb_in_port: endpoint {
|
|
remote-endpoint = <&replicator_out_port1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu@f8803000 {
|
|
compatible = "arm,coresight-tpiu", "arm,primecell";
|
|
reg = <0xf8803000 0x1000>;
|
|
clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
|
|
clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
|
|
in-ports {
|
|
port {
|
|
tpiu_in_port: endpoint {
|
|
remote-endpoint = <&replicator_out_port0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@f8804000 {
|
|
compatible = "arm,coresight-static-funnel", "arm,primecell";
|
|
reg = <0xf8804000 0x1000>;
|
|
clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
|
|
clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
|
|
|
|
/* funnel output ports */
|
|
out-ports {
|
|
port {
|
|
funnel_out_port: endpoint {
|
|
remote-endpoint =
|
|
<&replicator_in_port0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* funnel input ports */
|
|
port@0 {
|
|
reg = <0>;
|
|
funnel0_in_port0: endpoint {
|
|
remote-endpoint = <&ptm0_out_port>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
funnel0_in_port1: endpoint {
|
|
remote-endpoint = <&ptm1_out_port>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
funnel0_in_port2: endpoint {
|
|
};
|
|
};
|
|
/* The other input ports are not connect to anything */
|
|
};
|
|
};
|
|
|
|
ptm@f889c000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0xf889c000 0x1000>;
|
|
clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
|
|
clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
|
|
cpu = <&cpu0>;
|
|
out-ports {
|
|
port {
|
|
ptm0_out_port: endpoint {
|
|
remote-endpoint = <&funnel0_in_port0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ptm@f889d000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0xf889d000 0x1000>;
|
|
clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
|
|
clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
|
|
cpu = <&cpu1>;
|
|
out-ports {
|
|
port {
|
|
ptm1_out_port: endpoint {
|
|
remote-endpoint = <&funnel0_in_port1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|