mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 05:04:26 +00:00
bec7d5342d
The enetc-2 port is used as DSA master (connected back-to-back to mscc_felix_port4). Since the convention is to not enable ports in the common SoC dtsi unless they are used on the board, then enable enetc-2 only when mscc_felix_port4 itself is enabled. All existing device trees appear to adhere to this rule, so disable enetc-2 in the SoC dtsi. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
493 lines
12 KiB
Text
493 lines
12 KiB
Text
// SPDX-License-Identifier: GPL-2.0+ OR X11
|
|
/*
|
|
* NXP ls1028a SOC common device tree source
|
|
*
|
|
* Copyright 2019-2020 NXP
|
|
*
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
/ {
|
|
compatible = "fsl,ls1028a";
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
sysclk: sysclk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <100000000>;
|
|
clock-output-names = "sysclk";
|
|
};
|
|
|
|
clockgen: clocking@1300000 {
|
|
compatible = "fsl,ls1028a-clockgen";
|
|
reg = <0x0 0x1300000 0x0 0xa0000>;
|
|
#clock-cells = <2>;
|
|
clocks = <&sysclk>;
|
|
};
|
|
|
|
memory@01080000 {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x01080000 0 0x80000000>;
|
|
/* DRAM space - 1, size : 2 GB DRAM */
|
|
};
|
|
|
|
gic: interrupt-controller@6000000 {
|
|
compatible = "arm,gic-v3";
|
|
reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
|
|
<0x0 0x06040000 0 0x40000>;
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
|
|
IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
gic_lpi_base: syscon@0x80000000 {
|
|
compatible = "gic-lpi-base";
|
|
reg = <0x0 0x80000000 0x0 0x100000>;
|
|
max-gic-redistributors = <2>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
fspi: flexspi@20c0000 {
|
|
compatible = "nxp,lx2160a-fspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x20c0000 0x0 0x10000>,
|
|
<0x0 0x20000000 0x0 0x10000000>;
|
|
reg-names = "fspi_base", "fspi_mmap";
|
|
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
|
|
clock-names = "fspi_en", "fspi";
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
serial0: serial@21c0500 {
|
|
device_type = "serial";
|
|
compatible = "fsl,ns16550", "ns16550a";
|
|
reg = <0x0 0x21c0500 0x0 0x100>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
serial1: serial@21c0600 {
|
|
device_type = "serial";
|
|
compatible = "fsl,ns16550", "ns16550a";
|
|
reg = <0x0 0x21c0600 0x0 0x100>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie1: pcie@3400000 {
|
|
compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie";
|
|
reg = <0x00 0x03400000 0x0 0x80000
|
|
0x00 0x03480000 0x0 0x40000 /* lut registers */
|
|
0x00 0x034c0000 0x0 0x40000 /* pf controls registers */
|
|
0x80 0x00000000 0x0 0x20000>; /* configuration space */
|
|
reg-names = "dbi", "lut", "ctrl", "config";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
num-lanes = <4>;
|
|
bus-range = <0x0 0xff>;
|
|
ranges = <0x81000000 0x0 0x00000000 0x80 0x00020000 0x0 0x00010000 /* downstream I/O */
|
|
0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
|
|
};
|
|
|
|
pcie2: pcie@3500000 {
|
|
compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie";
|
|
reg = <0x00 0x03500000 0x0 0x80000
|
|
0x00 0x03580000 0x0 0x40000 /* lut registers */
|
|
0x00 0x035c0000 0x0 0x40000 /* pf controls registers */
|
|
0x88 0x00000000 0x0 0x20000>; /* configuration space */
|
|
reg-names = "dbi", "lut", "ctrl", "config";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
num-lanes = <4>;
|
|
bus-range = <0x0 0xff>;
|
|
ranges = <0x81000000 0x0 0x00000000 0x88 0x00020000 0x0 0x00010000 /* downstream I/O */
|
|
0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
|
|
};
|
|
|
|
pcie@1f0000000 {
|
|
compatible = "pci-host-ecam-generic";
|
|
/* ECAM bus 0, HW has more space reserved but not populated */
|
|
bus-range = <0x0 0x0>;
|
|
reg = <0x01 0xf0000000 0x0 0x100000>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
ranges= <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000>;
|
|
enetc0: pci@0,0 {
|
|
reg = <0x000000 0 0 0 0>;
|
|
status = "disabled";
|
|
};
|
|
enetc1: pci@0,1 {
|
|
reg = <0x000100 0 0 0 0>;
|
|
status = "disabled";
|
|
};
|
|
enetc2: pci@0,2 {
|
|
reg = <0x000200 0 0 0 0>;
|
|
status = "disabled";
|
|
phy-mode = "internal";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
mdio0: pci@0,3 {
|
|
#address-cells=<0>;
|
|
#size-cells=<1>;
|
|
reg = <0x000300 0 0 0 0>;
|
|
status = "disabled";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
mscc_felix: pci@0,5 {
|
|
reg = <0x000500 0 0 0 0>;
|
|
status = "disabled";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mscc_felix_port0: port@0 {
|
|
reg = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mscc_felix_port1: port@1 {
|
|
reg = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mscc_felix_port2: port@2 {
|
|
reg = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mscc_felix_port3: port@3 {
|
|
reg = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mscc_felix_port4: port@4 {
|
|
reg = <4>;
|
|
phy-mode = "internal";
|
|
status = "disabled";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
mscc_felix_port5: port@5 {
|
|
reg = <5>;
|
|
phy-mode = "internal";
|
|
status = "disabled";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
|
|
};
|
|
};
|
|
};
|
|
|
|
enetc6: pci@0,6 {
|
|
reg = <0x000600 0 0 0 0>;
|
|
status = "disabled";
|
|
phy-mode = "internal";
|
|
};
|
|
};
|
|
|
|
i2c0: i2c@2000000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2000000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@2010000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2010000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@2020000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2020000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@2030000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2030000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@2040000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2040000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c5: i2c@2050000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2050000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c6: i2c@2060000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2060000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c7: i2c@2070000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2070000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart0: serial@2260000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x2260000 0x0 0x1000>;
|
|
interrupts = <0 232 0x4>;
|
|
clocks = <&sysclk>;
|
|
clock-names = "ipg";
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart1: serial@2270000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x2270000 0x0 0x1000>;
|
|
interrupts = <0 233 0x4>;
|
|
clocks = <&sysclk>;
|
|
clock-names = "ipg";
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart2: serial@2280000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x2280000 0x0 0x1000>;
|
|
interrupts = <0 234 0x4>;
|
|
clocks = <&sysclk>;
|
|
clock-names = "ipg";
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart3: serial@2290000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x2290000 0x0 0x1000>;
|
|
interrupts = <0 235 0x4>;
|
|
clocks = <&sysclk>;
|
|
clock-names = "ipg";
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart4: serial@22a0000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x22a0000 0x0 0x1000>;
|
|
interrupts = <0 236 0x4>;
|
|
clocks = <&sysclk>;
|
|
clock-names = "ipg";
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart5: serial@22b0000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x22b0000 0x0 0x1000>;
|
|
interrupts = <0 237 0x4>;
|
|
clocks = <&sysclk>;
|
|
clock-names = "ipg";
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb1: usb3@3100000 {
|
|
compatible = "fsl,layerscape-dwc3";
|
|
reg = <0x0 0x3100000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2: usb3@3110000 {
|
|
compatible = "fsl,layerscape-dwc3";
|
|
reg = <0x0 0x3110000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
dspi0: dspi@2100000 {
|
|
compatible = "fsl,vf610-dspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2100000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "dspi";
|
|
clocks = <&clockgen 4 0>;
|
|
num-cs = <5>;
|
|
litte-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
dspi1: dspi@2110000 {
|
|
compatible = "fsl,vf610-dspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2110000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "dspi";
|
|
clocks = <&clockgen 4 0>;
|
|
num-cs = <5>;
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
dspi2: dspi@2120000 {
|
|
compatible = "fsl,vf610-dspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2120000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "dspi";
|
|
clocks = <&clockgen 4 0>;
|
|
num-cs = <5>;
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc0: esdhc@2140000 {
|
|
compatible = "fsl,esdhc";
|
|
reg = <0x0 0x2140000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
big-endian;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc1: esdhc@2150000 {
|
|
compatible = "fsl,esdhc";
|
|
reg = <0x0 0x2150000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
|
|
big-endian;
|
|
non-removable;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0: gpio@2300000 {
|
|
compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
|
|
reg = <0x0 0x2300000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
little-endian;
|
|
};
|
|
|
|
gpio1: gpio@2310000 {
|
|
compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
|
|
reg = <0x0 0x2310000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
little-endian;
|
|
};
|
|
|
|
gpio2: gpio@2320000 {
|
|
compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
|
|
reg = <0x0 0x2320000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
little-endian;
|
|
};
|
|
|
|
sata: sata@3200000 {
|
|
compatible = "fsl,ls1028a-ahci";
|
|
reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */
|
|
0x7 0x100520 0x0 0x4>; /* ecc sata addr*/
|
|
reg-names = "sata-base", "ecc-addr";
|
|
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
cluster1_core0_watchdog: wdt@c000000 {
|
|
compatible = "arm,sp805-wdt";
|
|
reg = <0x0 0xc000000 0x0 0x1000>;
|
|
};
|
|
};
|