u-boot/drivers/usb/host/xhci-fsl.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

215 lines
5.2 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2015,2016 Freescale Semiconductor, Inc.
*
* FSL USB HOST xHCI Controller
*
* Author: Ramneek Mehresh<ramneek.mehresh@freescale.com>
*/
#include <common.h>
#include <usb.h>
#include <linux/errno.h>
#include <linux/compat.h>
#include <linux/usb/xhci-fsl.h>
#include <linux/usb/dwc3.h>
#include "xhci.h"
#include <fsl_errata.h>
#include <fsl_usb.h>
#include <dm.h>
/* Declare global data pointer */
#ifndef CONFIG_DM_USB
static struct fsl_xhci fsl_xhci;
unsigned long ctr_addr[] = FSL_USB_XHCI_ADDR;
#else
struct xhci_fsl_priv {
struct xhci_ctrl xhci;
fdt_addr_t hcd_base;
struct fsl_xhci ctx;
};
#endif
__weak int __board_usb_init(int index, enum usb_init_type init)
{
return 0;
}
static int erratum_a008751(void)
{
#if defined(CONFIG_TARGET_LS2080AQDS) || defined(CONFIG_TARGET_LS2080ARDB) ||\
defined(CONFIG_TARGET_LS2080AQDS)
u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
writel(SCFG_USB3PRM1CR_INIT, scfg + SCFG_USB3PRM1CR / 4);
return 0;
#endif
return 1;
}
static void fsl_apply_xhci_errata(void)
{
int ret;
if (has_erratum_a008751()) {
ret = erratum_a008751();
if (ret != 0)
puts("Failed to apply erratum a008751\n");
}
}
static void fsl_xhci_set_beat_burst_length(struct dwc3 *dwc3_reg)
{
clrsetbits_le32(&dwc3_reg->g_sbuscfg0, USB3_ENABLE_BEAT_BURST_MASK,
USB3_ENABLE_BEAT_BURST);
setbits_le32(&dwc3_reg->g_sbuscfg1, USB3_SET_BEAT_BURST_LIMIT);
}
static int fsl_xhci_core_init(struct fsl_xhci *fsl_xhci)
{
int ret = 0;
ret = dwc3_core_init(fsl_xhci->dwc3_reg);
if (ret) {
debug("%s:failed to initialize core\n", __func__);
return ret;
}
/* We are hard-coding DWC3 core to Host Mode */
dwc3_set_mode(fsl_xhci->dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
/* Set GFLADJ_30MHZ as 20h as per XHCI spec default value */
dwc3_set_fladj(fsl_xhci->dwc3_reg, GFLADJ_30MHZ_DEFAULT);
/* Change beat burst and outstanding pipelined transfers requests */
fsl_xhci_set_beat_burst_length(fsl_xhci->dwc3_reg);
/*
* A-010151: The dwc3 phy TSMC 28-nm HPM 0.9/1.8 V does not
* reliably support Rx Detect in P3 mode(P3 is the default
* setting). Therefore, some USB3.0 devices may not be detected
* reliably in Super Speed mode. So, USB controller to configure
* USB in P2 mode whenever the Receive Detect feature is required.
* whenever the Receive Detect feature is required.
*/
if (has_erratum_a010151())
clrsetbits_le32(&fsl_xhci->dwc3_reg->g_usb3pipectl[0],
DWC3_GUSB3PIPECTL_DISRXDETP3,
DWC3_GUSB3PIPECTL_DISRXDETP3);
return ret;
}
static int fsl_xhci_core_exit(struct fsl_xhci *fsl_xhci)
{
/*
* Currently fsl socs do not support PHY shutdown from
* sw. But this support may be added in future socs.
*/
return 0;
}
#ifdef CONFIG_DM_USB
static int xhci_fsl_probe(struct udevice *dev)
{
struct xhci_fsl_priv *priv = dev_get_priv(dev);
struct xhci_hccr *hccr;
struct xhci_hcor *hcor;
int ret = 0;
/*
* Get the base address for XHCI controller from the device node
*/
priv->hcd_base = devfdt_get_addr(dev);
if (priv->hcd_base == FDT_ADDR_T_NONE) {
debug("Can't get the XHCI register base address\n");
return -ENXIO;
}
priv->ctx.hcd = (struct xhci_hccr *)priv->hcd_base;
priv->ctx.dwc3_reg = (struct dwc3 *)((char *)(priv->hcd_base) +
DWC3_REG_OFFSET);
fsl_apply_xhci_errata();
ret = fsl_xhci_core_init(&priv->ctx);
if (ret < 0) {
puts("Failed to initialize xhci\n");
return ret;
}
hccr = (struct xhci_hccr *)(priv->ctx.hcd);
hcor = (struct xhci_hcor *)((uintptr_t) hccr
+ HC_LENGTH(xhci_readl(&hccr->cr_capbase)));
debug("xhci-fsl: init hccr %lx and hcor %lx hc_length %lx\n",
(uintptr_t)hccr, (uintptr_t)hcor,
(uintptr_t)HC_LENGTH(xhci_readl(&hccr->cr_capbase)));
return xhci_register(dev, hccr, hcor);
}
static int xhci_fsl_remove(struct udevice *dev)
{
struct xhci_fsl_priv *priv = dev_get_priv(dev);
fsl_xhci_core_exit(&priv->ctx);
return xhci_deregister(dev);
}
static const struct udevice_id xhci_usb_ids[] = {
{ .compatible = "fsl,layerscape-dwc3", },
{ }
};
U_BOOT_DRIVER(xhci_fsl) = {
.name = "xhci_fsl",
.id = UCLASS_USB,
.of_match = xhci_usb_ids,
.probe = xhci_fsl_probe,
.remove = xhci_fsl_remove,
.ops = &xhci_usb_ops,
.platdata_auto_alloc_size = sizeof(struct usb_platdata),
.priv_auto_alloc_size = sizeof(struct xhci_fsl_priv),
.flags = DM_FLAG_ALLOC_PRIV_DMA,
};
#else
int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
{
struct fsl_xhci *ctx = &fsl_xhci;
int ret = 0;
ctx->hcd = (struct xhci_hccr *)ctr_addr[index];
ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET);
ret = board_usb_init(index, USB_INIT_HOST);
if (ret != 0) {
puts("Failed to initialize board for USB\n");
return ret;
}
fsl_apply_xhci_errata();
ret = fsl_xhci_core_init(ctx);
if (ret < 0) {
puts("Failed to initialize xhci\n");
return ret;
}
*hccr = (struct xhci_hccr *)ctx->hcd;
*hcor = (struct xhci_hcor *)((uintptr_t) *hccr
+ HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));
debug("fsl-xhci: init hccr %lx and hcor %lx hc_length %lx\n",
(uintptr_t)*hccr, (uintptr_t)*hcor,
(uintptr_t)HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));
return ret;
}
void xhci_hcd_stop(int index)
{
struct fsl_xhci *ctx = &fsl_xhci;
fsl_xhci_core_exit(ctx);
}
#endif