mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
403 lines
10 KiB
C
403 lines
10 KiB
C
/*
|
|
* (C) Copyright 2001-2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <config.h>
|
|
#include <mpc8xx.h>
|
|
#include <i2c.h>
|
|
|
|
#include <commproc.h>
|
|
#include <command.h>
|
|
#include <malloc.h>
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/string.h> /* for strdup */
|
|
|
|
|
|
/*
|
|
* Memory Controller Using
|
|
*
|
|
* CS0 - Flash memory (0x40000000)
|
|
* CS1 - FLASH memory (0x????????)
|
|
* CS2 - SDRAM (0x00000000)
|
|
* CS3 -
|
|
* CS4 -
|
|
* CS5 -
|
|
* CS6 - PCMCIA device
|
|
* CS7 - PCMCIA device
|
|
*/
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#define _not_used_ 0xffffffff
|
|
|
|
const uint sdram_table[]=
|
|
{
|
|
/* single read. (offset 0 in upm RAM) */
|
|
0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
|
|
0x1ff77c47,
|
|
|
|
/* MRS initialization (offset 5) */
|
|
|
|
0x1ff77c34, 0xefeabc34, 0x1fb57c35,
|
|
|
|
/* burst read. (offset 8 in upm RAM) */
|
|
0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
|
|
0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
|
|
_not_used_, _not_used_, _not_used_, _not_used_,
|
|
_not_used_, _not_used_, _not_used_, _not_used_,
|
|
|
|
/* single write. (offset 18 in upm RAM) */
|
|
0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,
|
|
_not_used_, _not_used_, _not_used_, _not_used_,
|
|
|
|
/* burst write. (offset 20 in upm RAM) */
|
|
0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
|
|
0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_,
|
|
_not_used_, _not_used_, _not_used_, _not_used_,
|
|
_not_used_, _not_used_, _not_used_, _not_used_,
|
|
|
|
/* refresh. (offset 30 in upm RAM) */
|
|
0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
|
|
0xfffffc84, 0xfffffc07, _not_used_, _not_used_,
|
|
_not_used_, _not_used_, _not_used_, _not_used_,
|
|
|
|
/* exception. (offset 3c in upm RAM) */
|
|
0x7ffffc07, _not_used_, _not_used_, _not_used_ };
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
|
|
int checkboard (void)
|
|
{
|
|
puts ("Board: R360 MPI Board\n");
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static long int dram_size (long int, long int *, long int);
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
long int size8, size9;
|
|
long int size_b0 = 0;
|
|
unsigned long reg;
|
|
|
|
upmconfig (UPMA, (uint *) sdram_table,
|
|
sizeof (sdram_table) / sizeof (uint));
|
|
|
|
/*
|
|
* Preliminary prescaler for refresh (depends on number of
|
|
* banks): This value is selected for four cycles every 62.4 us
|
|
* with two SDRAM banks or four cycles every 31.2 us with one
|
|
* bank. It will be adjusted after memory sizing.
|
|
*/
|
|
memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
|
|
|
|
memctl->memc_mar = 0x00000088;
|
|
|
|
/*
|
|
* Map controller bank 2 to the SDRAM bank at
|
|
* preliminary address - these have to be modified after the
|
|
* SDRAM size has been determined.
|
|
*/
|
|
memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
|
|
memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
|
|
|
|
memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
|
|
|
|
udelay (200);
|
|
|
|
/* perform SDRAM initializsation sequence */
|
|
|
|
memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */
|
|
udelay (200);
|
|
memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */
|
|
udelay (200);
|
|
|
|
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* Check Bank 2 Memory Size for re-configuration
|
|
*
|
|
* try 8 column mode
|
|
*/
|
|
size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM,
|
|
SDRAM_MAX_SIZE);
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* try 9 column mode
|
|
*/
|
|
size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM,
|
|
SDRAM_MAX_SIZE);
|
|
|
|
if (size8 < size9) { /* leave configuration at 9 columns */
|
|
size_b0 = size9;
|
|
/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
|
|
} else { /* back to 8 columns */
|
|
size_b0 = size8;
|
|
memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
|
|
udelay (500);
|
|
/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
|
|
}
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* Adjust refresh rate depending on SDRAM type, both banks
|
|
* For types > 128 MBit leave it at the current (fast) rate
|
|
*/
|
|
if ((size_b0 < 0x02000000)) {
|
|
/* reduce to 15.6 us (62.4 us / quad) */
|
|
memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
|
|
udelay (1000);
|
|
}
|
|
|
|
/*
|
|
* Final mapping
|
|
*/
|
|
|
|
memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
|
|
memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
|
|
|
|
/* adjust refresh rate depending on SDRAM type, one bank */
|
|
reg = memctl->memc_mptpr;
|
|
reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
|
|
memctl->memc_mptpr = reg;
|
|
|
|
udelay (10000);
|
|
|
|
#ifdef CONFIG_CAN_DRIVER
|
|
/* Initialize OR3 / BR3 */
|
|
memctl->memc_or3 = CONFIG_SYS_OR3_CAN; /* switch GPLB_5 to GPLA_5 */
|
|
memctl->memc_br3 = CONFIG_SYS_BR3_CAN;
|
|
|
|
/* Initialize MBMR */
|
|
memctl->memc_mbmr = MBMR_GPL_B4DIS; /* GPL_B4 works as UPWAITB */
|
|
|
|
/* Initialize UPMB for CAN: single read */
|
|
memctl->memc_mdr = 0xFFFFC004;
|
|
memctl->memc_mcr = 0x0100 | UPMB;
|
|
|
|
memctl->memc_mdr = 0x0FFFD004;
|
|
memctl->memc_mcr = 0x0101 | UPMB;
|
|
|
|
memctl->memc_mdr = 0x0FFFC000;
|
|
memctl->memc_mcr = 0x0102 | UPMB;
|
|
|
|
memctl->memc_mdr = 0x3FFFC004;
|
|
memctl->memc_mcr = 0x0103 | UPMB;
|
|
|
|
memctl->memc_mdr = 0xFFFFDC05;
|
|
memctl->memc_mcr = 0x0104 | UPMB;
|
|
|
|
/* Initialize UPMB for CAN: single write */
|
|
memctl->memc_mdr = 0xFFFCC004;
|
|
memctl->memc_mcr = 0x0118 | UPMB;
|
|
|
|
memctl->memc_mdr = 0xCFFCD004;
|
|
memctl->memc_mcr = 0x0119 | UPMB;
|
|
|
|
memctl->memc_mdr = 0x0FFCC000;
|
|
memctl->memc_mcr = 0x011A | UPMB;
|
|
|
|
memctl->memc_mdr = 0x7FFCC004;
|
|
memctl->memc_mcr = 0x011B | UPMB;
|
|
|
|
memctl->memc_mdr = 0xFFFDCC05;
|
|
memctl->memc_mcr = 0x011C | UPMB;
|
|
#endif
|
|
|
|
return (size_b0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Check memory range for valid RAM. A simple memory test determines
|
|
* the actually available RAM size between addresses `base' and
|
|
* `base + maxsize'. Some (not all) hardware errors are detected:
|
|
* - short between address lines
|
|
* - short between data lines
|
|
*/
|
|
|
|
static long int dram_size (long int mamr_value,
|
|
long int *base, long int maxsize)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
|
|
memctl->memc_mamr = mamr_value;
|
|
|
|
return (get_ram_size(base, maxsize));
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
void r360_i2c_lcd_write (uchar data0, uchar data1)
|
|
{
|
|
if (i2c_write (CONFIG_SYS_I2C_LCD_ADDR, data0, 1, &data1, 1)) {
|
|
printf("Can't write lcd data 0x%02X 0x%02X.\n", data0, data1);
|
|
}
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Keyboard Controller
|
|
*/
|
|
|
|
/* Number of bytes returned from Keyboard Controller */
|
|
#define KEYBD_KEY_MAX 16 /* maximum key number */
|
|
#define KEYBD_DATALEN ((KEYBD_KEY_MAX + 7) / 8) /* normal key scan data */
|
|
|
|
static uchar *key_match (uchar *);
|
|
|
|
int misc_init_r (void)
|
|
{
|
|
char kbd_data[KEYBD_DATALEN];
|
|
char keybd_env[2 * KEYBD_DATALEN + 1];
|
|
char *str;
|
|
int i;
|
|
|
|
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
|
|
|
i2c_read (CONFIG_SYS_I2C_KEY_ADDR, 0, 0, (uchar *)kbd_data, KEYBD_DATALEN);
|
|
|
|
for (i = 0; i < KEYBD_DATALEN; ++i) {
|
|
sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
|
|
}
|
|
setenv ("keybd", keybd_env);
|
|
|
|
str = strdup ((char *)key_match ((uchar *)keybd_env)); /* decode keys */
|
|
|
|
#ifdef CONFIG_PREBOOT /* automatically configure "preboot" command on key match */
|
|
setenv ("preboot", str); /* set or delete definition */
|
|
#endif /* CONFIG_PREBOOT */
|
|
if (str != NULL) {
|
|
free (str);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Check if pressed key(s) match magic sequence,
|
|
* and return the command string associated with that key(s).
|
|
*
|
|
* If no key press was decoded, NULL is returned.
|
|
*
|
|
* Note: the first character of the argument will be overwritten with
|
|
* the "magic charcter code" of the decoded key(s), or '\0'.
|
|
*
|
|
*
|
|
* Note: the string points to static environment data and must be
|
|
* saved before you call any function that modifies the environment.
|
|
*/
|
|
#ifdef CONFIG_PREBOOT
|
|
|
|
static uchar kbd_magic_prefix[] = "key_magic";
|
|
static uchar kbd_command_prefix[] = "key_cmd";
|
|
|
|
static uchar *key_match (uchar * kbd_str)
|
|
{
|
|
uchar magic[sizeof (kbd_magic_prefix) + 1];
|
|
uchar cmd_name[sizeof (kbd_command_prefix) + 1];
|
|
uchar *str, *suffix;
|
|
uchar *kbd_magic_keys;
|
|
char *cmd;
|
|
|
|
/*
|
|
* The following string defines the characters that can pe appended
|
|
* to "key_magic" to form the names of environment variables that
|
|
* hold "magic" key codes, i. e. such key codes that can cause
|
|
* pre-boot actions. If the string is empty (""), then only
|
|
* "key_magic" is checked (old behaviour); the string "125" causes
|
|
* checks for "key_magic1", "key_magic2" and "key_magic5", etc.
|
|
*/
|
|
if ((kbd_magic_keys = (uchar *)getenv ("magic_keys")) != NULL) {
|
|
/* loop over all magic keys;
|
|
* use '\0' suffix in case of empty string
|
|
*/
|
|
for (suffix = kbd_magic_keys;
|
|
*suffix || suffix == kbd_magic_keys;
|
|
++suffix) {
|
|
sprintf ((char *)magic, "%s%c", kbd_magic_prefix, *suffix);
|
|
|
|
#if 0
|
|
printf ("### Check magic \"%s\"\n", magic);
|
|
#endif
|
|
|
|
if ((str = (uchar *)getenv ((char *)magic)) != 0) {
|
|
|
|
#if 0
|
|
printf ("### Compare \"%s\" \"%s\"\n",
|
|
kbd_str, str);
|
|
#endif
|
|
if (strcmp ((char *)kbd_str, (char *)str) == 0) {
|
|
sprintf ((char *)cmd_name, "%s%c",
|
|
kbd_command_prefix,
|
|
*suffix);
|
|
|
|
if ((cmd = getenv ((char *)cmd_name)) != 0) {
|
|
#if 0
|
|
printf ("### Set PREBOOT to $(%s): \"%s\"\n",
|
|
cmd_name, cmd);
|
|
#endif
|
|
return ((uchar *)cmd);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
#if 0
|
|
printf ("### Delete PREBOOT\n");
|
|
#endif
|
|
*kbd_str = '\0';
|
|
return (NULL);
|
|
}
|
|
#endif /* CONFIG_PREBOOT */
|
|
|
|
/* Read Keyboard status */
|
|
int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
uchar kbd_data[KEYBD_DATALEN];
|
|
uchar keybd_env[2 * KEYBD_DATALEN + 1];
|
|
int i;
|
|
|
|
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
|
|
|
/* Read keys */
|
|
i2c_read (CONFIG_SYS_I2C_KEY_ADDR, 0, 0, kbd_data, KEYBD_DATALEN);
|
|
|
|
puts ("Keys:");
|
|
for (i = 0; i < KEYBD_DATALEN; ++i) {
|
|
sprintf ((char *)(keybd_env + i + i), "%02X", kbd_data[i]);
|
|
printf (" %02x", kbd_data[i]);
|
|
}
|
|
putc ('\n');
|
|
setenv ("keybd", (char *)keybd_env);
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
kbd, 1, 1, do_kbd,
|
|
"read keyboard status",
|
|
""
|
|
);
|