mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-24 21:54:01 +00:00
16794d3008
When CONFIG_CMD_USB and CONFIG_USB are disabled some compilation errors are seen as below. cmd/thordown.o: in function `usb_gadget_initialize': include/linux/usb/gadget.h:981: undefined reference to `board_usb_init' cmd/thordown.o: in function `do_thor_down': cmd/thordown.c:68: undefined reference to `g_dnl_unregister' cmd/thordown.o: in function `usb_gadget_release': include/linux/usb/gadget.h:986: undefined reference to `board_usb_cleanup' cmd/thordown.o: in function `do_thor_down': cmd/thordown.c:41: undefined reference to `g_dnl_register' cmd/thordown.c:48: undefined reference to `thor_init' cmd/thordown.c:56: undefined reference to `thor_handle' gnu/aarch64/lin/aarch64-linux/bin/aarch64-linux-gnu-ld.bfd: line 4: 8485 Segmentation fault (core dumped) $CC --sysroot=$LIBC --no-warn-rwx-segment "$@" Makefile:1779: recipe for target 'u-boot' failed make: *** [u-boot] Error 139 make: *** Deleting file 'u-boot' Add dependency of USB_GADGET_DOWNLOAD for CONFIG_CMD_THOR_DOWNLOAD to fix the errors. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Link: https://lore.kernel.org/r/20230904031528.11817-2-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2882 lines
79 KiB
Text
2882 lines
79 KiB
Text
menu "Command line interface"
|
|
|
|
config CMDLINE
|
|
bool "Support U-Boot commands"
|
|
default y
|
|
help
|
|
Enable U-Boot's command-line functions. This provides a means
|
|
to enter commands into U-Boot for a wide variety of purposes. It
|
|
also allows scripts (containing commands) to be executed.
|
|
Various commands and command categorys can be indivdually enabled.
|
|
Depending on the number of commands enabled, this can add
|
|
substantially to the size of U-Boot.
|
|
|
|
config HUSH_PARSER
|
|
bool "Use hush shell"
|
|
depends on CMDLINE
|
|
help
|
|
This option enables the "hush" shell (from Busybox) as command line
|
|
interpreter, thus enabling powerful command line syntax like
|
|
if...then...else...fi conditionals or `&&' and '||'
|
|
constructs ("shell scripts").
|
|
|
|
If disabled, you get the old, much simpler behaviour with a somewhat
|
|
smaller memory footprint.
|
|
|
|
config CMDLINE_EDITING
|
|
bool "Enable command line editing"
|
|
depends on CMDLINE
|
|
default y
|
|
help
|
|
Enable editing and History functions for interactive command line
|
|
input operations
|
|
|
|
config CMDLINE_PS_SUPPORT
|
|
bool "Enable support for changing the command prompt string at run-time"
|
|
depends on HUSH_PARSER
|
|
help
|
|
Only static string in the prompt is supported so far. The string is
|
|
obtained from environment variables PS1 and PS2.
|
|
|
|
config AUTO_COMPLETE
|
|
bool "Enable auto complete using TAB"
|
|
depends on CMDLINE
|
|
default y
|
|
help
|
|
Enable auto completion of commands using TAB.
|
|
|
|
config SYS_LONGHELP
|
|
bool "Enable long help messages"
|
|
depends on CMDLINE
|
|
default y if CMDLINE
|
|
help
|
|
Defined when you want long help messages included
|
|
Do not set this option when short of memory.
|
|
|
|
config SYS_PROMPT
|
|
string "Shell prompt"
|
|
default "Zynq> " if ARCH_ZYNQ
|
|
default "ZynqMP> " if ARCH_ZYNQMP
|
|
default "=> "
|
|
help
|
|
This string is displayed in the command line to the left of the
|
|
cursor.
|
|
|
|
config SYS_PROMPT_HUSH_PS2
|
|
string "Hush shell secondary prompt"
|
|
depends on HUSH_PARSER
|
|
default "> "
|
|
help
|
|
This defines the secondary prompt string, which is
|
|
printed when the command interpreter needs more input
|
|
to complete a command. Usually "> ".
|
|
|
|
config SYS_MAXARGS
|
|
int "Maximum number arguments accepted by commands"
|
|
default 16
|
|
|
|
config SYS_CBSIZE
|
|
int "Console input buffer size"
|
|
default 2048 if ARCH_TEGRA || ARCH_VERSAL || ARCH_ZYNQ || ARCH_ZYNQMP || \
|
|
RCAR_GEN3 || TARGET_SOCFPGA_SOC64
|
|
default 512 if ARCH_MX5 || ARCH_MX6 || ARCH_MX7 || FSL_LSCH2 || \
|
|
FSL_LSCH3 || X86
|
|
default 256 if M68K || PPC
|
|
default 1024
|
|
|
|
config SYS_PBSIZE
|
|
int "Buffer size for console output"
|
|
default 1024 if ARCH_SUNXI
|
|
default 1044
|
|
|
|
config SYS_XTRACE
|
|
bool "Command execution tracer"
|
|
depends on CMDLINE
|
|
default y if CMDLINE
|
|
help
|
|
This option enables the possiblity to print all commands before
|
|
executing them and after all variables are evaluated (similar
|
|
to Bash's xtrace/'set -x' feature).
|
|
To enable the tracer a variable "xtrace" needs to be defined in
|
|
the environment.
|
|
|
|
config BUILD_BIN2C
|
|
bool
|
|
|
|
comment "Commands"
|
|
|
|
menu "Info commands"
|
|
|
|
config CMD_ACPI
|
|
bool "acpi"
|
|
depends on ACPI
|
|
default y
|
|
help
|
|
List and dump ACPI tables. ACPI (Advanced Configuration and Power
|
|
Interface) is used mostly on x86 for providing information to the
|
|
Operating System about devices in the system. The tables are set up
|
|
by the firmware, typically U-Boot but possibly an earlier firmware
|
|
module, if U-Boot is chain-loaded from something else. ACPI tables
|
|
can also include code, to perform hardware-specific tasks required
|
|
by the Operating Systems. This allows some amount of separation
|
|
between the firmware and OS, and is particularly useful when you
|
|
want to make hardware changes without the OS needing to be adjusted.
|
|
|
|
config CMD_ADDRMAP
|
|
bool "addrmap"
|
|
depends on ADDR_MAP
|
|
default y
|
|
help
|
|
List non-identity virtual-physical memory mappings for 32-bit CPUs.
|
|
|
|
config CMD_BDI
|
|
bool "bdinfo"
|
|
default y
|
|
help
|
|
Print board info
|
|
|
|
config CMD_BDINFO_EXTRA
|
|
bool "bdinfo extra features"
|
|
default y if SANDBOX || X86
|
|
help
|
|
Show additional information about the board. This uses a little more
|
|
code space but provides more options, particularly those useful for
|
|
bringup, development and debugging.
|
|
|
|
config CMD_CONFIG
|
|
bool "config"
|
|
default SANDBOX
|
|
select BUILD_BIN2C
|
|
help
|
|
Print ".config" contents.
|
|
|
|
If this option is enabled, the ".config" file contents are embedded
|
|
in the U-Boot image and can be printed on the console by the "config"
|
|
command. This provides information of which options are enabled on
|
|
the running U-Boot.
|
|
|
|
config CMD_CONSOLE
|
|
bool "coninfo"
|
|
default y
|
|
help
|
|
Print console devices and information.
|
|
|
|
config CMD_CPU
|
|
bool "cpu"
|
|
depends on CPU
|
|
help
|
|
Print information about available CPUs. This normally shows the
|
|
number of CPUs, type (e.g. manufacturer, architecture, product or
|
|
internal name) and clock frequency. Other information may be
|
|
available depending on the CPU driver.
|
|
|
|
config CMD_FWU_METADATA
|
|
bool "fwu metadata read"
|
|
depends on FWU_MULTI_BANK_UPDATE
|
|
help
|
|
Command to read the metadata and dump it's contents
|
|
|
|
config CMD_LICENSE
|
|
bool "license"
|
|
select BUILD_BIN2C
|
|
help
|
|
Print GPL license text
|
|
|
|
config CMD_PMC
|
|
bool "pmc"
|
|
help
|
|
Provides access to the Intel Power-Management Controller (PMC) so
|
|
that its state can be examined. This does not currently support
|
|
changing the state but it is still useful for debugging and seeing
|
|
what is going on.
|
|
|
|
config CMD_REGINFO
|
|
bool "reginfo"
|
|
depends on PPC
|
|
help
|
|
Register dump
|
|
|
|
config CMD_TLV_EEPROM
|
|
bool "tlv_eeprom"
|
|
depends on I2C_EEPROM
|
|
select CRC32
|
|
help
|
|
Display and program the system EEPROM data block in ONIE Tlvinfo
|
|
format. TLV stands for Type-Length-Value.
|
|
|
|
config SPL_CMD_TLV_EEPROM
|
|
bool "tlv_eeprom for SPL"
|
|
depends on SPL_I2C_EEPROM
|
|
select SPL_DRIVERS_MISC
|
|
select SPL_CRC32
|
|
help
|
|
Read system EEPROM data block in ONIE Tlvinfo format from SPL.
|
|
|
|
config CMD_SBI
|
|
bool "sbi"
|
|
depends on RISCV_SMODE && SBI_V02
|
|
help
|
|
Display information about the SBI implementation.
|
|
|
|
endmenu
|
|
|
|
menu "Boot commands"
|
|
|
|
config CMD_BOOTD
|
|
bool "bootd"
|
|
default y
|
|
help
|
|
Run the command stored in the environment "bootcmd", i.e.
|
|
"bootd" does the same thing as "run bootcmd".
|
|
|
|
config CMD_BOOTM
|
|
bool "bootm"
|
|
default y
|
|
help
|
|
Boot an application image from the memory.
|
|
|
|
config CMD_BOOTM_PRE_LOAD
|
|
bool "enable pre-load on bootm"
|
|
depends on CMD_BOOTM
|
|
depends on IMAGE_PRE_LOAD
|
|
default n
|
|
help
|
|
Enable support of stage pre-load for the bootm command.
|
|
This stage allow to check or modify the image provided
|
|
to the bootm command.
|
|
|
|
config CMD_BOOTDEV
|
|
bool "bootdev"
|
|
depends on BOOTSTD
|
|
default y if BOOTSTD_FULL
|
|
help
|
|
Support listing available bootdevs (boot devices) which can provide an
|
|
OS to boot, as well as showing information about a particular one.
|
|
|
|
This command is not necessary for bootstd to work.
|
|
|
|
config CMD_BOOTFLOW
|
|
bool "bootflow"
|
|
depends on BOOTSTD
|
|
default y
|
|
help
|
|
Support scanning for bootflows available with the bootdevs. The
|
|
bootflows can optionally be booted.
|
|
|
|
config CMD_BOOTFLOW_FULL
|
|
bool "bootflow - extract subcommands"
|
|
depends on BOOTSTD_FULL
|
|
default y
|
|
help
|
|
Add the ability to list the available bootflows, select one and obtain
|
|
information about it.
|
|
|
|
This command is not necessary for bootstd to work.
|
|
|
|
config CMD_BOOTMETH
|
|
bool "bootmeth"
|
|
depends on BOOTSTD
|
|
default y if BOOTSTD_FULL
|
|
help
|
|
Support listing available bootmethds (methods used to boot an
|
|
Operating System), as well as selecting the order that the bootmeths
|
|
are used.
|
|
|
|
This command is not necessary for bootstd to work.
|
|
|
|
config BOOTM_EFI
|
|
bool "Support booting UEFI FIT images"
|
|
depends on CMD_BOOTEFI && CMD_BOOTM && FIT
|
|
default y
|
|
help
|
|
Support booting UEFI FIT images via the bootm command.
|
|
|
|
config CMD_BOOTZ
|
|
bool "bootz"
|
|
help
|
|
Boot the Linux zImage
|
|
|
|
config CMD_BOOTI
|
|
bool "booti"
|
|
depends on ARM64 || RISCV
|
|
default y
|
|
help
|
|
Boot an AArch64 Linux Kernel image from memory.
|
|
|
|
config BOOTM_LINUX
|
|
bool "Support booting Linux OS images"
|
|
depends on CMD_BOOTM || CMD_BOOTZ || CMD_BOOTI
|
|
default y
|
|
help
|
|
Support booting the Linux kernel directly via a command such as bootm
|
|
or booti or bootz.
|
|
|
|
config BOOTM_NETBSD
|
|
bool "Support booting NetBSD (non-EFI) loader images"
|
|
depends on CMD_BOOTM
|
|
default y
|
|
help
|
|
Support booting NetBSD via the bootm command.
|
|
|
|
config BOOTM_OPENRTOS
|
|
bool "Support booting OPENRTOS / FreeRTOS images"
|
|
depends on CMD_BOOTM
|
|
help
|
|
Support booting OPENRTOS / FreeRTOS via the bootm command.
|
|
|
|
config BOOTM_OSE
|
|
bool "Support booting Enea OSE images"
|
|
depends on (ARM && (ARM64 || CPU_V7A || CPU_V7R) || SANDBOX || PPC || X86)
|
|
depends on CMD_BOOTM
|
|
help
|
|
Support booting Enea OSE images via the bootm command.
|
|
|
|
config BOOTM_PLAN9
|
|
bool "Support booting Plan9 OS images"
|
|
depends on CMD_BOOTM
|
|
default y
|
|
help
|
|
Support booting Plan9 images via the bootm command.
|
|
|
|
config BOOTM_RTEMS
|
|
bool "Support booting RTEMS OS images"
|
|
depends on CMD_BOOTM
|
|
default y
|
|
help
|
|
Support booting RTEMS images via the bootm command.
|
|
|
|
config CMD_SEAMA
|
|
bool "Support read SEAMA NAND images"
|
|
depends on MTD_RAW_NAND
|
|
help
|
|
Support reading NAND Seattle Image (SEAMA) images.
|
|
|
|
config CMD_VBE
|
|
bool "vbe - Verified Boot for Embedded"
|
|
depends on BOOTMETH_VBE
|
|
default y if BOOTSTD_FULL
|
|
help
|
|
Provides various subcommands related to VBE, such as listing the
|
|
available methods, looking at the state and changing which method
|
|
is used to boot. Updating the parameters is not currently
|
|
supported.
|
|
|
|
config BOOTM_VXWORKS
|
|
bool "Support booting VxWorks OS images"
|
|
depends on CMD_BOOTM
|
|
default y
|
|
help
|
|
Support booting VxWorks images via the bootm command.
|
|
|
|
config SYS_BOOTM_LEN
|
|
hex "Maximum size of a decompresed OS image"
|
|
depends on CMD_BOOTM || CMD_BOOTI || CMD_BOOTZ || \
|
|
LEGACY_IMAGE_FORMAT || SPL_LEGACY_IMAGE_FORMAT
|
|
default 0x4000000 if PPC || ARM64
|
|
default 0x1000000 if X86 || ARCH_MX6 || ARCH_MX7
|
|
default 0x800000
|
|
help
|
|
This is the maximum size of the buffer that is used to decompress the OS
|
|
image in to, if passing a compressed image to bootm/booti/bootz.
|
|
|
|
config CMD_BOOTEFI
|
|
bool "bootefi"
|
|
depends on EFI_LOADER
|
|
default y
|
|
help
|
|
Boot an EFI image from memory.
|
|
|
|
config CMD_BOOTEFI_HELLO_COMPILE
|
|
bool "Compile a standard EFI hello world binary for testing"
|
|
depends on CMD_BOOTEFI && !CPU_V7M
|
|
default y
|
|
help
|
|
This compiles a standard EFI hello world application with U-Boot so
|
|
that it can be used with the test/py testing framework. This is useful
|
|
for testing that EFI is working at a basic level, and for bringing
|
|
up EFI support on a new architecture.
|
|
|
|
No additional space will be required in the resulting U-Boot binary
|
|
when this option is enabled.
|
|
|
|
config CMD_BOOTEFI_HELLO
|
|
bool "Allow booting a standard EFI hello world for testing"
|
|
depends on CMD_BOOTEFI_HELLO_COMPILE
|
|
default y if CMD_BOOTEFI_SELFTEST
|
|
help
|
|
This adds a standard EFI hello world application to U-Boot so that
|
|
it can be used with the 'bootefi hello' command. This is useful
|
|
for testing that EFI is working at a basic level, and for bringing
|
|
up EFI support on a new architecture.
|
|
|
|
source lib/efi_selftest/Kconfig
|
|
|
|
config CMD_BOOTMENU
|
|
bool "bootmenu"
|
|
select MENU
|
|
select CHARSET
|
|
help
|
|
Add an ANSI terminal boot menu command.
|
|
|
|
config CMD_ADTIMG
|
|
bool "adtimg"
|
|
help
|
|
Android DTB/DTBO image manipulation commands. Read dtb/dtbo files from
|
|
image into RAM, dump image structure information, etc. Those dtb/dtbo
|
|
files should be merged in one dtb further, which needs to be passed to
|
|
the kernel, as part of a boot process.
|
|
|
|
config CMD_ABOOTIMG
|
|
bool "abootimg"
|
|
depends on ANDROID_BOOT_IMAGE
|
|
help
|
|
Android Boot Image manipulation commands. Allows one to extract
|
|
images contained in boot.img, like kernel, ramdisk, dtb, etc, and
|
|
obtain corresponding meta-information from boot.img.
|
|
|
|
See doc/android/boot-image.rst for details.
|
|
|
|
config CMD_CEDIT
|
|
bool "cedit - Configuration editor"
|
|
depends on CEDIT
|
|
default y
|
|
help
|
|
Provides a command to allow editing of board configuration and
|
|
providing a UI for the user to adjust settings. Subcommands allow
|
|
loading and saving of configuration as well as showing an editor.
|
|
|
|
config CMD_ELF
|
|
bool "bootelf, bootvx"
|
|
default y
|
|
select LIB_ELF
|
|
help
|
|
Boot an ELF/vxWorks image from the memory.
|
|
|
|
config CMD_FDT
|
|
bool "Flattened Device Tree utility commands"
|
|
default y
|
|
depends on OF_LIBFDT
|
|
help
|
|
Do FDT related setup before booting into the Operating System.
|
|
|
|
config SUPPORT_EXTENSION_SCAN
|
|
bool
|
|
|
|
config CMD_EXTENSION
|
|
bool "Extension board management command"
|
|
select CMD_FDT
|
|
depends on SUPPORT_EXTENSION_SCAN
|
|
help
|
|
Enables the "extension" command, which allows to detect
|
|
extension boards connected to the system, and apply
|
|
corresponding Device Tree overlays.
|
|
|
|
config CMD_GO
|
|
bool "go"
|
|
default y
|
|
help
|
|
Start an application at a given address.
|
|
|
|
config CMD_RUN
|
|
bool "run"
|
|
default y
|
|
help
|
|
Run the command in the given environment variable.
|
|
|
|
config CMD_IMI
|
|
bool "iminfo"
|
|
default y
|
|
help
|
|
Print header information for application image.
|
|
|
|
config CMD_IMLS
|
|
bool "imls"
|
|
help
|
|
List all images found in flash
|
|
|
|
config CMD_XIMG
|
|
bool "imxtract"
|
|
default y
|
|
help
|
|
Extract a part of a multi-image.
|
|
|
|
config CMD_XXD
|
|
bool "xxd"
|
|
help
|
|
Print file as hexdump to standard output
|
|
|
|
config CMD_SPL
|
|
bool "spl export - Export boot information for Falcon boot"
|
|
depends on SPL
|
|
help
|
|
Falcon mode allows booting directly from SPL into an Operating
|
|
System such as Linux, thus skipping U-Boot proper. See
|
|
doc/README.falcon for full information about how to use this
|
|
command.
|
|
|
|
config CMD_SPL_NAND_OFS
|
|
hex "Offset of OS args or dtb for Falcon-mode NAND boot"
|
|
depends on CMD_SPL && (TPL_NAND_SUPPORT || SPL_NAND_SUPPORT)
|
|
default 0x0
|
|
help
|
|
This provides the offset of the command line arguments for Linux
|
|
when booting from NAND in Falcon mode. See doc/README.falcon
|
|
for full information about how to use this option (and also see
|
|
board/gateworks/gw_ventana/README for an example).
|
|
|
|
config CMD_SPL_NOR_OFS
|
|
hex "Offset of OS args or dtb for Falcon-mode NOR boot"
|
|
depends on CMD_SPL && SPL_NOR_SUPPORT
|
|
default 0x0
|
|
help
|
|
This provides the offset of the command line arguments or dtb for
|
|
Linux when booting from NOR in Falcon mode.
|
|
|
|
config CMD_SPL_WRITE_SIZE
|
|
hex "Size of argument area"
|
|
depends on CMD_SPL
|
|
default 0x2000
|
|
help
|
|
This provides the size of the command-line argument area in NAND
|
|
flash used by Falcon-mode boot. See the documentation until CMD_SPL
|
|
for detail.
|
|
|
|
config CMD_THOR_DOWNLOAD
|
|
bool "thor - TIZEN 'thor' download"
|
|
select DFU
|
|
select USB_FUNCTION_THOR
|
|
depends on USB_GADGET_DOWNLOAD
|
|
help
|
|
Implements the 'thor' download protocol. This is a way of
|
|
downloading a software update over USB from an attached host.
|
|
There is no documentation about this within the U-Boot source code
|
|
but you should be able to find something on the interwebs.
|
|
|
|
config THOR_RESET_OFF
|
|
bool "thor: Disable reset on completion"
|
|
depends on CMD_THOR_DOWNLOAD
|
|
|
|
config CMD_ZBOOT
|
|
bool "zboot - x86 boot command"
|
|
help
|
|
With x86 machines it is common to boot a bzImage file which
|
|
contains both a kernel and a setup.bin file. The latter includes
|
|
configuration information from the dark ages which x86 boards still
|
|
need to pick things out of.
|
|
|
|
Consider using FIT in preference to this since it supports directly
|
|
booting both 32- and 64-bit kernels, as well as secure boot.
|
|
Documentation is available in doc/uImage.FIT/x86-fit-boot.txt
|
|
|
|
endmenu
|
|
|
|
menu "Environment commands"
|
|
|
|
config CMD_ASKENV
|
|
bool "ask for env variable"
|
|
help
|
|
Ask for environment variable
|
|
|
|
config CMD_EXPORTENV
|
|
bool "env export"
|
|
default y
|
|
help
|
|
Export environments.
|
|
|
|
config CMD_IMPORTENV
|
|
bool "env import"
|
|
default y
|
|
help
|
|
Import environments.
|
|
|
|
config CMD_EDITENV
|
|
bool "editenv"
|
|
default y
|
|
help
|
|
Edit environment variable.
|
|
|
|
config CMD_GREPENV
|
|
bool "search env"
|
|
help
|
|
Allow for searching environment variables
|
|
|
|
config CMD_SAVEENV
|
|
bool "saveenv"
|
|
default y
|
|
help
|
|
Save all environment variables into the compiled-in persistent
|
|
storage.
|
|
|
|
config CMD_ERASEENV
|
|
bool "eraseenv"
|
|
depends on CMD_SAVEENV
|
|
help
|
|
Erase environment variables from the compiled-in persistent
|
|
storage.
|
|
|
|
config CMD_ENV_EXISTS
|
|
bool "env exists"
|
|
default y
|
|
help
|
|
Check if a variable is defined in the environment for use in
|
|
shell scripting.
|
|
|
|
config CMD_ENV_CALLBACK
|
|
bool "env callbacks - print callbacks and their associated variables"
|
|
help
|
|
Some environment variable have callbacks defined by
|
|
U_BOOT_ENV_CALLBACK. These are called when the variable changes.
|
|
For example changing "baudrate" adjust the serial baud rate. This
|
|
command lists the currently defined callbacks.
|
|
|
|
config CMD_ENV_FLAGS
|
|
bool "env flags -print variables that have non-default flags"
|
|
help
|
|
Some environment variables have special flags that control their
|
|
behaviour. For example, serial# can only be written once and cannot
|
|
be deleted. This command shows the variables that have special
|
|
flags.
|
|
|
|
config CMD_NVEDIT_EFI
|
|
bool "env [set|print] -e - set/print UEFI variables"
|
|
depends on EFI_LOADER
|
|
imply HEXDUMP
|
|
help
|
|
UEFI variables are encoded as some form of U-Boot variables.
|
|
If enabled, we are allowed to set/print UEFI variables using
|
|
"env" command with "-e" option without knowing details.
|
|
|
|
config CMD_NVEDIT_INDIRECT
|
|
bool "env indirect - Sets environment value from another"
|
|
|
|
config CMD_NVEDIT_INFO
|
|
bool "env info - print or evaluate environment information"
|
|
help
|
|
Print environment information:
|
|
- env_valid : is environment valid
|
|
- env_ready : is environment imported into hash table
|
|
- env_use_default : is default environment used
|
|
|
|
This command can be optionally used for evaluation in scripts:
|
|
[-d] : evaluate whether default environment is used
|
|
[-p] : evaluate whether environment can be persisted
|
|
[-q] : quiet output
|
|
The result of multiple evaluations will be combined with AND.
|
|
|
|
config CMD_NVEDIT_LOAD
|
|
bool "env load"
|
|
help
|
|
Load all environment variables from the compiled-in persistent
|
|
storage.
|
|
|
|
config CMD_NVEDIT_SELECT
|
|
bool "env select"
|
|
help
|
|
Select the compiled-in persistent storage of environment variables.
|
|
|
|
endmenu
|
|
|
|
menu "Memory commands"
|
|
|
|
config CMD_BINOP
|
|
bool "binop"
|
|
help
|
|
Compute binary operations (xor, or, and) of byte arrays of arbitrary
|
|
size from memory and store the result in memory or the environment.
|
|
|
|
config CMD_BLOBLIST
|
|
bool "bloblist"
|
|
default y if BLOBLIST
|
|
help
|
|
Show information about the bloblist, a collection of binary blobs
|
|
held in memory that persist between SPL and U-Boot. In the case of
|
|
x86 devices the bloblist can be used to hold ACPI tables so that they
|
|
remain available in memory.
|
|
|
|
config CMD_CRC32
|
|
bool "crc32"
|
|
default y
|
|
select HASH
|
|
help
|
|
Compute CRC32.
|
|
|
|
config CRC32_VERIFY
|
|
bool "crc32 -v"
|
|
depends on CMD_CRC32
|
|
help
|
|
Add -v option to verify data against a crc32 checksum.
|
|
|
|
config CMD_EEPROM
|
|
bool "eeprom - EEPROM subsystem"
|
|
help
|
|
(deprecated, needs conversion to driver model)
|
|
Provides commands to read and write EEPROM (Electrically Erasable
|
|
Programmable Read Only Memory) chips that are connected over an
|
|
I2C bus.
|
|
|
|
config CMD_EEPROM_LAYOUT
|
|
bool "Enable layout-aware eeprom commands"
|
|
depends on CMD_EEPROM
|
|
help
|
|
(deprecated, needs conversion to driver model)
|
|
When enabled, additional eeprom sub-commands become available.
|
|
|
|
eeprom print - prints the contents of the eeprom in a human-readable
|
|
way (eeprom layout fields, and data formatted to be fit for human
|
|
consumption).
|
|
|
|
eeprom update - allows user to update eeprom fields by specifying
|
|
the field name, and providing the new data in a human readable format
|
|
(same format as displayed by the eeprom print command).
|
|
|
|
Both commands can either auto detect the layout, or be told which
|
|
layout to use.
|
|
|
|
Feature API:
|
|
__weak int parse_layout_version(char *str)
|
|
- override to provide your own layout name parsing
|
|
__weak void __eeprom_layout_assign(struct eeprom_layout *layout,
|
|
int layout_version);
|
|
- override to setup the layout metadata based on the version
|
|
__weak int eeprom_layout_detect(unsigned char *data)
|
|
- override to provide your own algorithm for detecting layout
|
|
version
|
|
eeprom_field.c
|
|
- contains various printing and updating functions for common
|
|
types of eeprom fields. Can be used for defining
|
|
custom layouts.
|
|
|
|
config EEPROM_LAYOUT_HELP_STRING
|
|
string "Tells user what layout names are supported"
|
|
depends on CMD_EEPROM_LAYOUT
|
|
default "<not defined>"
|
|
help
|
|
Help printed with the LAYOUT VERSIONS part of the 'eeprom'
|
|
command's help.
|
|
|
|
config SYS_I2C_EEPROM_BUS
|
|
int "I2C bus of the EEPROM device."
|
|
depends on CMD_EEPROM
|
|
default 0
|
|
|
|
config SYS_I2C_EEPROM_ADDR_LEN
|
|
int "Length in bytes of the EEPROM memory array address"
|
|
depends on CMD_EEPROM || ID_EEPROM
|
|
default 1
|
|
range 1 2
|
|
help
|
|
Note: This is NOT the chip address length!
|
|
|
|
config SYS_EEPROM_SIZE
|
|
depends on CMD_EEPROM
|
|
int "Size in bytes of the EEPROM device"
|
|
default 256
|
|
|
|
config SYS_EEPROM_PAGE_WRITE_BITS
|
|
int "Number of bits used to address bytes in a single page"
|
|
depends on CMD_EEPROM
|
|
default 8
|
|
help
|
|
The EEPROM page size is 2^SYS_EEPROM_PAGE_WRITE_BITS.
|
|
A 64 byte page, for example would require six bits.
|
|
|
|
config SYS_EEPROM_PAGE_WRITE_DELAY_MS
|
|
int "Number of milliseconds to delay between page writes"
|
|
depends on CMD_EEPROM || CMD_I2C
|
|
default 0
|
|
|
|
config LOOPW
|
|
bool "loopw"
|
|
help
|
|
Infinite write loop on address range
|
|
|
|
config CMD_MD5SUM
|
|
bool "md5sum"
|
|
select MD5
|
|
help
|
|
Compute MD5 checksum.
|
|
|
|
config MD5SUM_VERIFY
|
|
bool "md5sum -v"
|
|
depends on CMD_MD5SUM
|
|
help
|
|
Add -v option to verify data against an MD5 checksum.
|
|
|
|
config CMD_MEMINFO
|
|
bool "meminfo"
|
|
help
|
|
Display memory information.
|
|
|
|
config CMD_MEMORY
|
|
bool "md, mm, nm, mw, cp, cmp, base, loop"
|
|
default y
|
|
help
|
|
Memory commands.
|
|
md - memory display
|
|
mm - memory modify (auto-incrementing address)
|
|
nm - memory modify (constant address)
|
|
mw - memory write (fill)
|
|
cp - memory copy
|
|
cmp - memory compare
|
|
base - print or set address offset
|
|
loop - initialize loop on address range
|
|
|
|
config CMD_MEM_SEARCH
|
|
bool "ms - Memory search"
|
|
help
|
|
Memory-search command
|
|
|
|
This allows searching through a region of memory looking for hex
|
|
data (byte, 16-bit word, 32-bit long, also 64-bit on machines that
|
|
support it). It is also possible to search for a string. The
|
|
command accepts a memory range and a list of values to search for.
|
|
The values need to appear in memory in the same order they are given
|
|
in the command. At most 10 matches can be returned at a time, but
|
|
pressing return will show the next 10 matches. Environment variables
|
|
are set for use with scripting (memmatches, memaddr, mempos).
|
|
|
|
config CMD_MX_CYCLIC
|
|
bool "Enable cyclic md/mw commands"
|
|
depends on CMD_MEMORY
|
|
help
|
|
Add the "mdc" and "mwc" memory commands. These are cyclic
|
|
"md/mw" commands.
|
|
Examples:
|
|
|
|
=> mdc.b 10 4 500
|
|
This command will print 4 bytes (10,11,12,13) each 500 ms.
|
|
|
|
=> mwc.l 100 12345678 10
|
|
This command will write 12345678 to address 100 all 10 ms.
|
|
|
|
config CMD_RANDOM
|
|
bool "random"
|
|
default y
|
|
depends on CMD_MEMORY && (LIB_RAND || LIB_HW_RAND)
|
|
help
|
|
random - fill memory with random data
|
|
|
|
config CMD_MEMTEST
|
|
bool "memtest"
|
|
help
|
|
Simple RAM read/write test.
|
|
|
|
if CMD_MEMTEST
|
|
|
|
config SYS_ALT_MEMTEST
|
|
bool "Alternative test"
|
|
help
|
|
Use a more complete alternative memory test.
|
|
|
|
if SYS_ALT_MEMTEST
|
|
|
|
config SYS_ALT_MEMTEST_BITFLIP
|
|
bool "Bitflip test"
|
|
default y
|
|
help
|
|
The alternative memory test includes bitflip test since 2020.07.
|
|
The bitflip test significantly increases the overall test time.
|
|
Bitflip test can optionally be disabled here.
|
|
|
|
endif
|
|
|
|
config SYS_MEMTEST_START
|
|
hex "default start address for mtest"
|
|
default 0x0
|
|
help
|
|
This is the default start address for mtest for simple read/write
|
|
test. If no arguments are given to mtest, default address is used
|
|
as start address.
|
|
|
|
config SYS_MEMTEST_END
|
|
hex "default end address for mtest"
|
|
default 0x1000
|
|
help
|
|
This is the default end address for mtest for simple read/write
|
|
test. If no arguments are given to mtest, default address is used
|
|
as end address.
|
|
|
|
endif
|
|
|
|
config CMD_SHA1SUM
|
|
bool "sha1sum"
|
|
select SHA1
|
|
help
|
|
Compute SHA1 checksum.
|
|
|
|
config SHA1SUM_VERIFY
|
|
bool "sha1sum -v"
|
|
depends on CMD_SHA1SUM
|
|
help
|
|
Add -v option to verify data against a SHA1 checksum.
|
|
|
|
config CMD_STRINGS
|
|
bool "strings - display strings in memory"
|
|
help
|
|
This works similarly to the Unix 'strings' command except that it
|
|
works with a memory range. String of printable characters found
|
|
within the range are displayed. The minimum number of characters
|
|
for a sequence to be considered a string can be provided.
|
|
|
|
endmenu
|
|
|
|
menu "Compression commands"
|
|
|
|
config CMD_LZMADEC
|
|
bool "lzmadec"
|
|
default y if CMD_BOOTI
|
|
select LZMA
|
|
help
|
|
Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm)
|
|
image from memory.
|
|
|
|
config CMD_UNLZ4
|
|
bool "unlz4"
|
|
default y if CMD_BOOTI
|
|
select LZ4
|
|
help
|
|
Support decompressing an LZ4 image from memory region.
|
|
|
|
config CMD_UNZIP
|
|
bool "unzip"
|
|
default y if CMD_BOOTI
|
|
select GZIP
|
|
help
|
|
Uncompress a zip-compressed memory region.
|
|
|
|
config CMD_ZIP
|
|
bool "zip"
|
|
select GZIP_COMPRESSED
|
|
help
|
|
Compress a memory region with zlib deflate method.
|
|
|
|
endmenu
|
|
|
|
menu "Device access commands"
|
|
|
|
config CMD_ARMFFA
|
|
bool "Arm FF-A test command"
|
|
depends on ARM_FFA_TRANSPORT
|
|
help
|
|
Provides a test command for the FF-A support
|
|
supported options:
|
|
- Listing the partition(s) info
|
|
- Sending a data pattern to the specified partition
|
|
- Displaying the arm_ffa device info
|
|
|
|
config CMD_ARMFLASH
|
|
#depends on FLASH_CFI_DRIVER
|
|
bool "armflash"
|
|
help
|
|
ARM Ltd reference designs flash partition access
|
|
|
|
config CMD_ADC
|
|
bool "adc - Access Analog to Digital Converters info and data"
|
|
select ADC
|
|
depends on DM_REGULATOR
|
|
help
|
|
Shows ADC device info and permit printing one-shot analog converted
|
|
data from a named Analog to Digital Converter.
|
|
|
|
config CMD_BCB
|
|
bool "bcb"
|
|
depends on MMC
|
|
depends on PARTITIONS
|
|
help
|
|
Read/modify/write the fields of Bootloader Control Block, usually
|
|
stored on the flash "misc" partition with its structure defined in:
|
|
https://android.googlesource.com/platform/bootable/recovery/+/master/
|
|
bootloader_message/include/bootloader_message/bootloader_message.h
|
|
|
|
Some real-life use-cases include (but are not limited to):
|
|
- Determine the "boot reason" (and act accordingly):
|
|
https://source.android.com/devices/bootloader/boot-reason
|
|
- Get/pass a list of commands from/to recovery:
|
|
https://android.googlesource.com/platform/bootable/recovery
|
|
- Inspect/dump the contents of the BCB fields
|
|
|
|
config CMD_BIND
|
|
bool "bind/unbind - Bind or unbind a device to/from a driver"
|
|
depends on DM
|
|
default y if USB_ETHER
|
|
help
|
|
Bind or unbind a device to/from a driver from the command line.
|
|
This is useful in situations where a device may be handled by several
|
|
drivers. For example, this can be used to bind a UDC to the usb ether
|
|
gadget driver from the command line.
|
|
|
|
config CMD_CLK
|
|
bool "clk - Show clock frequencies"
|
|
help
|
|
(deprecated)
|
|
Shows clock frequences by calling a sock_clk_dump() hook function.
|
|
This is depreated in favour of using the CLK uclass and accessing
|
|
clock values from associated drivers. However currently no command
|
|
exists for this.
|
|
|
|
config CMD_DEMO
|
|
bool "demo - Demonstration commands for driver model"
|
|
depends on DM
|
|
help
|
|
Provides a 'demo' command which can be used to play around with
|
|
driver model. To use this properly you will need to enable one or
|
|
both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
|
|
Otherwise you will always get an empty list of devices. The demo
|
|
devices are defined in the sandbox device tree, so the easiest
|
|
option is to use sandbox and pass the -d point to sandbox's
|
|
u-boot.dtb file.
|
|
|
|
config CMD_DFU
|
|
bool "dfu"
|
|
select DFU
|
|
help
|
|
Enables the command "dfu" which is used to have U-Boot create a DFU
|
|
class device via USB. This command requires that the "dfu_alt_info"
|
|
environment variable be set and define the alt settings to expose to
|
|
the host.
|
|
|
|
config CMD_DM
|
|
bool "dm - Access to driver model information"
|
|
depends on DM
|
|
help
|
|
Provides access to driver model data structures and information,
|
|
such as a list of devices, list of uclasses and the state of each
|
|
device (e.g. activated). This is not required for operation, but
|
|
can be useful to see the state of driver model for debugging or
|
|
interest.
|
|
|
|
config CMD_FASTBOOT
|
|
bool "fastboot - Android fastboot support"
|
|
depends on FASTBOOT
|
|
help
|
|
This enables the command "fastboot" which enables the Android
|
|
fastboot mode for the platform. Fastboot is a protocol for
|
|
downloading images, flashing and device control used on
|
|
Android devices. Fastboot requires either the network stack
|
|
enabled or support for acting as a USB device.
|
|
|
|
See doc/android/fastboot.rst for more information.
|
|
|
|
config CMD_FLASH
|
|
bool "flinfo, erase, protect"
|
|
default y
|
|
depends on MTD || FLASH_CFI_DRIVER || MTD_NOR_FLASH
|
|
help
|
|
NOR flash support.
|
|
flinfo - print FLASH memory information
|
|
erase - FLASH memory
|
|
protect - enable or disable FLASH write protection
|
|
|
|
config CMD_FPGA
|
|
bool "fpga"
|
|
depends on FPGA
|
|
default y
|
|
help
|
|
FPGA support.
|
|
|
|
config CMD_FPGA_LOADBP
|
|
bool "fpga loadbp - load partial bitstream (Xilinx only)"
|
|
depends on CMD_FPGA
|
|
help
|
|
Supports loading an FPGA device from a bitstream buffer containing
|
|
a partial bitstream.
|
|
|
|
config CMD_FPGA_LOADFS
|
|
bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
|
|
depends on CMD_FPGA
|
|
help
|
|
Supports loading an FPGA device from a FAT filesystem.
|
|
|
|
config CMD_FPGA_LOADMK
|
|
bool "fpga loadmk - load bitstream from image"
|
|
depends on CMD_FPGA
|
|
help
|
|
Supports loading an FPGA device from a image generated by mkimage.
|
|
|
|
config CMD_FPGA_LOADP
|
|
bool "fpga loadp - load partial bitstream"
|
|
depends on CMD_FPGA
|
|
help
|
|
Supports loading an FPGA device from a bitstream buffer containing
|
|
a partial bitstream.
|
|
|
|
config CMD_FPGA_LOAD_SECURE
|
|
bool "fpga loads - loads secure bitstreams"
|
|
depends on CMD_FPGA
|
|
select FPGA_LOAD_SECURE
|
|
help
|
|
Enables the fpga loads command which is used to load secure
|
|
(authenticated or encrypted or both) bitstreams on to FPGA.
|
|
|
|
config CMD_FPGAD
|
|
bool "fpgad - dump FPGA registers"
|
|
help
|
|
(legacy, needs conversion to driver model)
|
|
Provides a way to dump FPGA registers by calling the board-specific
|
|
fpga_get_reg() function. This functions similarly to the 'md'
|
|
command.
|
|
|
|
config CMD_FUSE
|
|
bool "fuse - support for the fuse subssystem"
|
|
help
|
|
(deprecated - needs conversion to driver model)
|
|
This allows reading, sensing, programming or overriding fuses
|
|
which control the behaviour of the device. The command uses the
|
|
fuse_...() API.
|
|
|
|
config CMD_GPIO
|
|
bool "gpio"
|
|
help
|
|
GPIO support.
|
|
|
|
config CMD_GPIO_READ
|
|
bool "gpio read - save GPIO value to variable"
|
|
depends on CMD_GPIO
|
|
help
|
|
Enables the 'gpio read' command that saves the value
|
|
of a GPIO pin to a variable.
|
|
|
|
config CMD_PWM
|
|
bool "pwm"
|
|
depends on DM_PWM
|
|
help
|
|
Control PWM channels, this allows invert/config/enable/disable PWM channels.
|
|
|
|
config CMD_GPT
|
|
bool "GPT (GUID Partition Table) command"
|
|
select EFI_PARTITION
|
|
select PARTITION_UUIDS
|
|
imply RANDOM_UUID
|
|
help
|
|
Enable the 'gpt' command to ready and write GPT style partition
|
|
tables.
|
|
|
|
config RANDOM_UUID
|
|
bool "GPT Random UUID generation"
|
|
select LIB_UUID
|
|
help
|
|
Enable the generation of partitions with random UUIDs if none
|
|
are provided.
|
|
|
|
config CMD_GPT_RENAME
|
|
bool "GPT partition renaming commands"
|
|
depends on CMD_GPT
|
|
help
|
|
Enables the 'gpt' command to interchange names on two GPT
|
|
partitions via the 'gpt swap' command or to rename single
|
|
partitions via the 'rename' command.
|
|
|
|
config CMD_IDE
|
|
bool "ide - Support for IDE drivers"
|
|
select IDE
|
|
help
|
|
Provides an 'ide' command which allows accessing the IDE drive,
|
|
resetting the IDE interface, printing the partition table and
|
|
geting device info. It also enables the 'diskboot' command which
|
|
permits booting from an IDE drive.
|
|
|
|
config CMD_IO
|
|
bool "io - Support for performing I/O accesses"
|
|
help
|
|
Provides an 'iod' command to display I/O space and an 'iow' command
|
|
to write values to the I/O space. This can be useful for manually
|
|
checking the state of devices during boot when debugging device
|
|
drivers, etc.
|
|
|
|
config CMD_IOTRACE
|
|
bool "iotrace - Support for tracing I/O activity"
|
|
help
|
|
Provides an 'iotrace' command which supports recording I/O reads and
|
|
writes in a trace buffer in memory . It also maintains a checksum
|
|
of the trace records (even if space is exhausted) so that the
|
|
sequence of I/O accesses can be verified.
|
|
|
|
When debugging drivers it is useful to see what I/O accesses were
|
|
done and in what order.
|
|
|
|
Even if the individual accesses are of little interest it can be
|
|
useful to verify that the access pattern is consistent each time
|
|
an operation is performed. In this case a checksum can be used to
|
|
characterise the operation of a driver. The checksum can be compared
|
|
across different runs of the operation to verify that the driver is
|
|
working properly.
|
|
|
|
In particular, when performing major refactoring of the driver, where
|
|
the access pattern should not change, the checksum provides assurance
|
|
that the refactoring work has not broken the driver.
|
|
|
|
This works by sneaking into the io.h heder for an architecture and
|
|
redirecting I/O accesses through iotrace's tracing mechanism.
|
|
|
|
For now no commands are provided to examine the trace buffer. The
|
|
format is fairly simple, so 'md' is a reasonable substitute.
|
|
|
|
Note: The checksum feature is only useful for I/O regions where the
|
|
contents do not change outside of software control. Where this is not
|
|
suitable you can fall back to manually comparing the addresses. It
|
|
might be useful to enhance tracing to only checksum the accesses and
|
|
not the data read/written.
|
|
|
|
config CMD_I2C
|
|
bool "i2c"
|
|
help
|
|
I2C support.
|
|
|
|
config CMD_W1
|
|
depends on W1
|
|
default y if W1
|
|
bool "w1 - Support for Dallas 1-Wire protocol"
|
|
help
|
|
Dallas 1-wire protocol support
|
|
|
|
config CMD_LOADB
|
|
bool "loadb"
|
|
default y
|
|
help
|
|
Load a binary file over serial line.
|
|
|
|
config CMD_LOADM
|
|
bool "loadm"
|
|
help
|
|
Load a binary over memory mapped.
|
|
|
|
config CMD_LOADS
|
|
bool "loads - Load a file over serial in S-Record format"
|
|
default y
|
|
help
|
|
Load an S-Record file over serial line
|
|
|
|
config LOADS_ECHO
|
|
bool "Echo all characters received during a loads back to console"
|
|
depends on CMD_LOADS
|
|
help
|
|
If enabled, all characters received during a serial download (using
|
|
the "loads" command) are echoed back. This might be needed by some
|
|
terminal emulations (like "cu"), but may as well just take time on
|
|
others. This sets the initial value of the "loads_echo" environment
|
|
variable to 1.
|
|
|
|
config CMD_SAVES
|
|
bool "saves - Save a file over serial in S-Record format"
|
|
depends on CMD_LOADS
|
|
help
|
|
Provides a way to save a binary file using the Motorola S-Record
|
|
format over the serial line.
|
|
|
|
config SYS_LOADS_BAUD_CHANGE
|
|
bool "Enable a temporary baudrate change during loads/saves command"
|
|
depends on CMD_LOADS || CMD_SAVES
|
|
|
|
config CMD_LOADXY_TIMEOUT
|
|
int "loadxy_timeout"
|
|
range 0 2000
|
|
default 90
|
|
help
|
|
Initial timeout for loadx and loady commands. Zero means infinity.
|
|
|
|
config CMD_LSBLK
|
|
depends on BLK
|
|
bool "lsblk - list block drivers and devices"
|
|
help
|
|
Print list of available block device drivers, and for each, the list
|
|
of known block devices.
|
|
|
|
config CMD_MBR
|
|
bool "MBR (Master Boot Record) command"
|
|
select DOS_PARTITION
|
|
help
|
|
Enable the 'mbr' command to ready and write MBR (Master Boot Record)
|
|
style partition tables.
|
|
|
|
config CMD_MISC
|
|
bool "misc"
|
|
depends on MISC
|
|
help
|
|
Enable the command "misc" for accessing miscellaneous devices with
|
|
a MISC uclass driver. The command provides listing all MISC devices
|
|
as well as read and write functionalities via their drivers.
|
|
|
|
config CMD_MMC
|
|
bool "mmc"
|
|
depends on MMC
|
|
help
|
|
MMC memory mapped support.
|
|
|
|
if CMD_MMC
|
|
|
|
config CMD_BKOPS_ENABLE
|
|
bool "mmc bkops enable"
|
|
depends on CMD_MMC
|
|
help
|
|
Enable command for setting manual background operations handshake
|
|
on a eMMC device. The feature is optionally available on eMMC devices
|
|
conforming to standard >= 4.41.
|
|
|
|
config CMD_MMC_RPMB
|
|
bool "Enable support for RPMB in the mmc command"
|
|
depends on SUPPORT_EMMC_RPMB
|
|
help
|
|
Enable the commands for reading, writing and programming the
|
|
key for the Replay Protection Memory Block partition in eMMC.
|
|
|
|
config CMD_MMC_SWRITE
|
|
bool "mmc swrite"
|
|
depends on MMC_WRITE
|
|
select IMAGE_SPARSE
|
|
help
|
|
Enable support for the "mmc swrite" command to write Android sparse
|
|
images to eMMC.
|
|
|
|
endif
|
|
|
|
config CMD_CLONE
|
|
bool "clone"
|
|
depends on BLK
|
|
help
|
|
Enable storage cloning over block devices, useful for
|
|
initial flashing by external block device without network
|
|
or usb support.
|
|
|
|
config CMD_OPTEE_RPMB
|
|
bool "Enable read/write support on RPMB via OPTEE"
|
|
depends on SUPPORT_EMMC_RPMB && OPTEE
|
|
help
|
|
Enable the commands for reading, writing persistent named values
|
|
in the Replay Protection Memory Block partition in eMMC by
|
|
using Persistent Objects in OPTEE
|
|
|
|
config CMD_MTD
|
|
bool "mtd"
|
|
depends on MTD
|
|
select MTD_PARTITIONS
|
|
help
|
|
MTD commands support.
|
|
|
|
config CMD_MUX
|
|
bool "mux"
|
|
depends on MULTIPLEXER
|
|
help
|
|
List, select, and deselect mux controllers on the fly.
|
|
|
|
config CMD_NAND
|
|
bool "nand"
|
|
default y if NAND_SUNXI
|
|
depends on MTD_RAW_NAND
|
|
help
|
|
NAND support.
|
|
|
|
if CMD_NAND
|
|
config CMD_NAND_TRIMFFS
|
|
bool "nand write.trimffs"
|
|
default y if ARCH_SUNXI
|
|
help
|
|
Allows one to skip empty pages when flashing something on a NAND.
|
|
|
|
config CMD_NAND_LOCK_UNLOCK
|
|
bool "nand lock/unlock"
|
|
help
|
|
NAND locking support.
|
|
|
|
config CMD_NAND_TORTURE
|
|
bool "nand torture"
|
|
help
|
|
NAND torture support.
|
|
|
|
endif # CMD_NAND
|
|
|
|
config CMD_NVME
|
|
bool "nvme"
|
|
depends on NVME
|
|
default y if NVME
|
|
help
|
|
NVM Express device support
|
|
|
|
config CMD_ONENAND
|
|
bool "onenand - access to onenand device"
|
|
depends on MTD
|
|
help
|
|
OneNAND is a brand of NAND ('Not AND' gate) flash which provides
|
|
various useful features. This command allows reading, writing,
|
|
and erasing blocks. It allso provides a way to show and change
|
|
bad blocks, and test the device.
|
|
|
|
config USE_ONENAND_BOARD_INIT
|
|
bool "Call onenand_board_init() in the onenand command"
|
|
depends on CMD_ONENAND
|
|
|
|
config CMD_OSD
|
|
bool "osd"
|
|
help
|
|
Enable the 'osd' command which allows to query information from and
|
|
write text data to a on-screen display (OSD) device; a virtual device
|
|
associated with a display capable of displaying a text overlay on the
|
|
display it's associated with..
|
|
|
|
config CMD_PART
|
|
bool "part"
|
|
depends on PARTITIONS
|
|
select PARTITION_UUIDS
|
|
help
|
|
Read and display information about the partition table on
|
|
various media.
|
|
|
|
config CMD_PCI
|
|
bool "pci - Access PCI devices"
|
|
help
|
|
Provide access to PCI (Peripheral Interconnect Bus), a type of bus
|
|
used on some devices to allow the CPU to communicate with its
|
|
peripherals. Sub-commands allow bus enumeration, displaying and
|
|
changing configuration space and a few other features.
|
|
|
|
config CMD_PCI_MPS
|
|
bool "pci_mps - Configure PCI device MPS"
|
|
depends on PCI
|
|
help
|
|
Enables PCI Express Maximum Packet Size (MPS) tuning. This
|
|
command configures the PCI Express MPS of each endpoint to the
|
|
largest value supported by all devices below the root complex.
|
|
The Maximum Read Request Size will not be altered. This method is
|
|
the same algorithm as used by Linux pci=pcie_bus_safe.
|
|
|
|
config CMD_PINMUX
|
|
bool "pinmux - show pins muxing"
|
|
depends on PINCTRL
|
|
default y if PINCTRL
|
|
help
|
|
Parse all available pin-controllers and show pins muxing. This
|
|
is useful for debug purpoer to check the pin muxing and to know if
|
|
a pin is configured as a GPIO or as an alternate function.
|
|
|
|
config CMD_POWEROFF
|
|
bool "poweroff"
|
|
help
|
|
Poweroff/Shutdown the system
|
|
|
|
config CMD_READ
|
|
bool "read - Read binary data from a partition"
|
|
help
|
|
Provides low-level access to the data in a partition.
|
|
|
|
config CMD_REMOTEPROC
|
|
bool "remoteproc"
|
|
depends on REMOTEPROC
|
|
help
|
|
Support for Remote Processor control
|
|
|
|
config CMD_SATA
|
|
bool "sata - Access SATA subsystem"
|
|
select SATA
|
|
help
|
|
SATA (Serial Advanced Technology Attachment) is a serial bus
|
|
standard for connecting to hard drives and other storage devices.
|
|
This command provides information about attached devices and allows
|
|
reading, writing and other operations.
|
|
|
|
SATA replaces PATA (originally just ATA), which stands for Parallel AT
|
|
Attachment, where AT refers to an IBM AT (Advanced Technology)
|
|
computer released in 1984.
|
|
|
|
config CMD_SCSI
|
|
bool "scsi - Access to SCSI devices"
|
|
depends on SCSI
|
|
default y
|
|
help
|
|
This provides a 'scsi' command which provides access to SCSI (Small
|
|
Computer System Interface) devices. The command provides a way to
|
|
scan the bus, reset the bus, read and write data and get information
|
|
about devices.
|
|
|
|
config CMD_SDRAM
|
|
bool "sdram - Print SDRAM configuration information"
|
|
help
|
|
Provides information about attached SDRAM. This assumed that the
|
|
SDRAM has an EEPROM with information that can be read using the
|
|
I2C bus. This is only available on some boards.
|
|
|
|
config CMD_SF
|
|
bool "sf"
|
|
depends on DM_SPI_FLASH || SPI_FLASH
|
|
default y if DM_SPI_FLASH
|
|
help
|
|
SPI Flash support
|
|
|
|
config CMD_SF_TEST
|
|
bool "sf test - Allow testing of SPI flash"
|
|
depends on CMD_SF
|
|
help
|
|
Provides a way to test that SPI flash is working correctly. The
|
|
test is destructive, in that an area of SPI flash must be provided
|
|
for the test to use. Performance information is also provided,
|
|
measuring the performance of reading, writing and erasing in
|
|
Mbps (Million Bits Per Second). This value should approximately
|
|
equal the SPI bus speed for a single-bit-wide SPI bus, assuming
|
|
everything is working properly.
|
|
|
|
config CMD_SPI
|
|
bool "sspi - Command to access spi device"
|
|
depends on SPI
|
|
help
|
|
SPI utility command.
|
|
|
|
config DEFAULT_SPI_BUS
|
|
int "default spi bus used by sspi command"
|
|
depends on CMD_SPI
|
|
default 0
|
|
|
|
config DEFAULT_SPI_MODE
|
|
hex "default spi mode used by sspi command (see include/spi.h)"
|
|
depends on CMD_SPI
|
|
default 0x0
|
|
|
|
config CMD_TEMPERATURE
|
|
bool "temperature - display the temperature from thermal sensors"
|
|
depends on DM_THERMAL
|
|
help
|
|
Provides a way to list thermal sensors and to get their readings.
|
|
|
|
config CMD_TSI148
|
|
bool "tsi148 - Command to access tsi148 device"
|
|
help
|
|
This provides various sub-commands to initialise and configure the
|
|
Turndra tsi148 device. See the command help for full details.
|
|
|
|
config CMD_UFS
|
|
bool "Enable UFS - Universal Flash Subsystem commands"
|
|
depends on UFS
|
|
help
|
|
"This provides commands to initialise and configure universal flash
|
|
subsystem devices"
|
|
|
|
config CMD_UNIVERSE
|
|
bool "universe - Command to set up the Turndra Universe controller"
|
|
help
|
|
This allows setting up the VMEbus provided by this controller.
|
|
See the command help for full details.
|
|
|
|
config CMD_USB
|
|
bool "usb"
|
|
depends on USB_HOST
|
|
help
|
|
USB support.
|
|
|
|
config CMD_USB_SDP
|
|
bool "sdp"
|
|
select USB_FUNCTION_SDP
|
|
help
|
|
Enables the command "sdp" which is used to have U-Boot emulating the
|
|
Serial Download Protocol (SDP) via USB.
|
|
|
|
config CMD_ROCKUSB
|
|
bool "rockusb"
|
|
depends on USB_FUNCTION_ROCKUSB
|
|
help
|
|
Rockusb protocol is widely used by Rockchip SoC based devices. It can
|
|
read/write info, image to/from devices. This enable rockusb command
|
|
support to communication with rockusb device. for more detail about
|
|
this command, please read doc/README.rockusb.
|
|
|
|
config CMD_USB_MASS_STORAGE
|
|
bool "UMS usb mass storage"
|
|
depends on USB_GADGET_DOWNLOAD
|
|
select USB_FUNCTION_MASS_STORAGE
|
|
depends on BLK && USB_GADGET
|
|
help
|
|
Enables the command "ums" and the USB mass storage support to the
|
|
export a block device: U-Boot, the USB device, acts as a simple
|
|
external hard drive plugged on the host USB port.
|
|
|
|
config CMD_UMS_ABORT_KEYED
|
|
bool "UMS abort with any key"
|
|
depends on CMD_USB_MASS_STORAGE
|
|
help
|
|
Allow interruption of usb mass storage run with any key pressed.
|
|
|
|
config CMD_PVBLOCK
|
|
bool "Xen para-virtualized block device"
|
|
depends on XEN
|
|
select PVBLOCK
|
|
help
|
|
Xen para-virtualized block device support
|
|
|
|
config CMD_VIRTIO
|
|
bool "virtio"
|
|
depends on VIRTIO
|
|
default y if VIRTIO
|
|
help
|
|
VirtIO block device support
|
|
|
|
config CMD_WDT
|
|
bool "wdt"
|
|
depends on WDT
|
|
help
|
|
This provides commands to control the watchdog timer devices.
|
|
|
|
config CMD_WRITE
|
|
bool "write - Write binary data to a partition"
|
|
help
|
|
Provides low-level write access to a partition.
|
|
|
|
config CMD_AXI
|
|
bool "axi"
|
|
depends on AXI
|
|
help
|
|
Enable the command "axi" for accessing AXI (Advanced eXtensible
|
|
Interface) busses, a on-chip interconnect specification for managing
|
|
functional blocks in SoC designs, which is also often used in designs
|
|
involving FPGAs (e.g. communication with IP cores in Xilinx FPGAs).
|
|
endmenu
|
|
|
|
|
|
menu "Shell scripting commands"
|
|
|
|
config CMD_CAT
|
|
bool "cat"
|
|
help
|
|
Print file to standard output
|
|
|
|
config CMD_ECHO
|
|
bool "echo"
|
|
default y
|
|
help
|
|
Echo args to console
|
|
|
|
config CMD_ITEST
|
|
bool "itest"
|
|
default y
|
|
help
|
|
Return true/false on integer compare.
|
|
|
|
config CMD_SOURCE
|
|
bool "source"
|
|
default y
|
|
help
|
|
Run script from memory
|
|
|
|
config CMD_SETEXPR
|
|
bool "setexpr"
|
|
default y
|
|
help
|
|
Evaluate boolean and math expressions and store the result in an env
|
|
variable.
|
|
Also supports loading the value at a memory location into a variable.
|
|
If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
|
|
|
|
config CMD_SETEXPR_FMT
|
|
bool "setexpr_fmt"
|
|
depends on CMD_SETEXPR
|
|
help
|
|
Evaluate format string expression and store result in an environment
|
|
variable.
|
|
|
|
endmenu
|
|
|
|
menu "Android support commands"
|
|
|
|
config CMD_AB_SELECT
|
|
bool "ab_select"
|
|
depends on ANDROID_AB
|
|
help
|
|
On Android devices with more than one boot slot (multiple copies of
|
|
the kernel and system images) this provides a command to select which
|
|
slot should be used to boot from and register the boot attempt. This
|
|
is used by the new A/B update model where one slot is updated in the
|
|
background while running from the other slot.
|
|
|
|
endmenu
|
|
|
|
if NET
|
|
|
|
menuconfig CMD_NET
|
|
bool "Network commands"
|
|
default y
|
|
imply NETDEVICES
|
|
|
|
if CMD_NET
|
|
|
|
config CMD_BOOTP
|
|
bool "bootp"
|
|
default y
|
|
help
|
|
bootp - boot image via network using BOOTP/TFTP protocol
|
|
|
|
config CMD_DHCP
|
|
bool "dhcp"
|
|
depends on CMD_BOOTP
|
|
help
|
|
Boot image via network using DHCP/TFTP protocol
|
|
|
|
config CMD_DHCP6
|
|
bool "dhcp6"
|
|
depends on IPV6
|
|
help
|
|
Boot image via network using DHCPv6/TFTP protocol using IPv6.
|
|
|
|
Will perform 4-message exchange with DHCPv6 server, requesting
|
|
the minimum required options to TFTP boot. Complies with RFC 8415.
|
|
|
|
config BOOTP_MAY_FAIL
|
|
bool "Allow for the BOOTP/DHCP server to not be found"
|
|
depends on CMD_BOOTP
|
|
help
|
|
If the DHCP server is not found after the configured retry count, the
|
|
call will fail instead of starting over. This can be used to fail
|
|
over to Link-local IP address configuration if the DHCP server is not
|
|
available.
|
|
|
|
config BOOTP_BOOTPATH
|
|
bool "Request & store 'rootpath' from BOOTP/DHCP server"
|
|
default y
|
|
depends on CMD_BOOTP
|
|
help
|
|
Even though the config is called BOOTP_BOOTPATH, it stores the
|
|
path in the variable 'rootpath'.
|
|
|
|
config BOOTP_VENDOREX
|
|
bool "Support vendor extensions from BOOTP/DHCP server"
|
|
depends on CMD_BOOTP
|
|
|
|
config BOOTP_BOOTFILESIZE
|
|
bool "Request & store 'bootfilesize' from BOOTP/DHCP server"
|
|
depends on CMD_BOOTP
|
|
|
|
config BOOTP_DNS
|
|
bool "Request & store 'dnsip' from BOOTP/DHCP server"
|
|
default y
|
|
depends on CMD_BOOTP
|
|
help
|
|
The primary DNS server is stored as 'dnsip'. If two servers are
|
|
returned, you must set BOOTP_DNS2 to store that second server IP
|
|
also.
|
|
|
|
config BOOTP_DNS2
|
|
bool "Store 'dnsip2' from BOOTP/DHCP server"
|
|
depends on BOOTP_DNS
|
|
help
|
|
If a DHCP client requests the DNS server IP from a DHCP server,
|
|
it is possible that more than one DNS serverip is offered to the
|
|
client. If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS
|
|
server IP will be stored in the additional environment
|
|
variable "dnsip2". The first DNS serverip is always
|
|
stored in the variable "dnsip", when BOOTP_DNS is defined.
|
|
|
|
config BOOTP_GATEWAY
|
|
bool "Request & store 'gatewayip' from BOOTP/DHCP server"
|
|
default y
|
|
depends on CMD_BOOTP
|
|
|
|
config BOOTP_HOSTNAME
|
|
bool "Request & store 'hostname' from BOOTP/DHCP server"
|
|
default y
|
|
depends on CMD_BOOTP
|
|
help
|
|
The name may or may not be qualified with the local domain name.
|
|
|
|
config BOOTP_PREFER_SERVERIP
|
|
bool "serverip variable takes precedent over DHCP server IP."
|
|
depends on CMD_BOOTP
|
|
help
|
|
By default a BOOTP/DHCP reply will overwrite the 'serverip' variable.
|
|
|
|
With this option enabled, the 'serverip' variable in the environment
|
|
takes precedence over DHCP server IP and will only be set by the DHCP
|
|
server if not already set in the environment.
|
|
|
|
config BOOTP_SUBNETMASK
|
|
bool "Request & store 'netmask' from BOOTP/DHCP server"
|
|
default y
|
|
depends on CMD_BOOTP
|
|
|
|
config BOOTP_NISDOMAIN
|
|
bool "Request & store 'nisdomain' from BOOTP/DHCP server"
|
|
depends on CMD_BOOTP
|
|
|
|
config BOOTP_NTPSERVER
|
|
bool "Request & store 'ntpserverip' from BOOTP/DHCP server"
|
|
depends on CMD_BOOTP
|
|
|
|
config BOOTP_TIMEOFFSET
|
|
bool "Request & store 'timeoffset' from BOOTP/DHCP server"
|
|
depends on CMD_BOOTP && CMD_SNTP
|
|
|
|
config CMD_PCAP
|
|
bool "pcap capture"
|
|
help
|
|
Selecting this will allow capturing all Ethernet packets and store
|
|
them in physical memory in a PCAP formated file,
|
|
later to be analyzed by PCAP reader application (IE. WireShark).
|
|
|
|
config BOOTP_PXE
|
|
bool "Send PXE client arch to BOOTP/DHCP server"
|
|
default y
|
|
depends on CMD_BOOTP && CMD_PXE
|
|
help
|
|
Supported for ARM, ARM64, and x86 for now.
|
|
|
|
config BOOTP_PXE_CLIENTARCH
|
|
hex
|
|
depends on BOOTP_PXE
|
|
default 0x16 if ARM64
|
|
default 0x15 if ARM
|
|
default 0x0 if X86
|
|
|
|
config BOOTP_VCI_STRING
|
|
string
|
|
depends on CMD_BOOTP
|
|
default "U-Boot.armv7" if CPU_V7A || CPU_V7M || CPU_V7R
|
|
default "U-Boot.armv8" if ARM64
|
|
default "U-Boot.arm" if ARM
|
|
default "U-Boot"
|
|
|
|
if CMD_DHCP6
|
|
|
|
config DHCP6_PXE_CLIENTARCH
|
|
hex
|
|
default 0x16 if ARM64
|
|
default 0x15 if ARM
|
|
default 0xFF
|
|
|
|
config DHCP6_PXE_DHCP_OPTION
|
|
bool "Request & store 'pxe_configfile' from DHCP6 server"
|
|
|
|
config DHCP6_ENTERPRISE_ID
|
|
int "Enterprise ID to send in DHCPv6 Vendor Class Option"
|
|
default 0
|
|
|
|
endif
|
|
|
|
config CMD_TFTPBOOT
|
|
bool "tftpboot"
|
|
default y
|
|
help
|
|
tftpboot - load file via network using TFTP protocol
|
|
|
|
config CMD_TFTPPUT
|
|
bool "tftp put"
|
|
depends on CMD_TFTPBOOT
|
|
help
|
|
TFTP put command, for uploading files to a server
|
|
|
|
config CMD_TFTPSRV
|
|
bool "tftpsrv"
|
|
depends on CMD_TFTPBOOT
|
|
help
|
|
Act as a TFTP server and boot the first received file
|
|
|
|
config NET_TFTP_VARS
|
|
bool "Control TFTP timeout and count through environment"
|
|
depends on CMD_TFTPBOOT
|
|
default y
|
|
help
|
|
If set, allows controlling the TFTP timeout through the
|
|
environment variable tftptimeout, and the TFTP maximum
|
|
timeout count through the variable tftptimeoutcountmax.
|
|
If unset, timeout and maximum are hard-defined as 1 second
|
|
and 10 timouts per TFTP transfer.
|
|
|
|
config CMD_RARP
|
|
bool "rarpboot"
|
|
help
|
|
Boot image via network using RARP/TFTP protocol
|
|
|
|
config CMD_NFS
|
|
bool "nfs"
|
|
help
|
|
Boot image via network using NFS protocol.
|
|
|
|
config NFS_TIMEOUT
|
|
int "Timeout in milliseconds for NFS mounts"
|
|
depends on CMD_NFS
|
|
default 2000
|
|
help
|
|
Timeout in milliseconds used in NFS protocol. If you encounter
|
|
"ERROR: Cannot umount" in nfs command, try longer timeout such as
|
|
10000.
|
|
|
|
config SYS_DISABLE_AUTOLOAD
|
|
bool "Disable automatically loading files over the network"
|
|
depends on CMD_BOOTP || CMD_DHCP || CMD_NFS || CMD_RARP
|
|
help
|
|
Typically, commands such as "dhcp" will attempt to automatically
|
|
load a file from the network, once the initial network configuration
|
|
is complete. Enable this option to disable this behavior and instead
|
|
require files to be loaded over the network by subsequent commands.
|
|
|
|
config CMD_WGET
|
|
bool "wget"
|
|
select PROT_TCP
|
|
help
|
|
wget is a simple command to download kernel, or other files,
|
|
from a http server over TCP.
|
|
|
|
config CMD_MII
|
|
bool "mii"
|
|
imply CMD_MDIO
|
|
help
|
|
If set, allows 802.3(clause 22) MII Management functions interface access
|
|
The management interface specified in Clause 22 provides
|
|
a simple, two signal, serial interface to connect a
|
|
Station Management entity and a managed PHY for providing access
|
|
to management parameters and services.
|
|
The interface is referred to as the MII management interface.
|
|
|
|
config MII_INIT
|
|
bool "Call mii_init() in the mii command"
|
|
depends on CMD_MII && (MPC8XX_FEC || FSLDMAFE || MCFFEC)
|
|
|
|
config CMD_MDIO
|
|
bool "mdio"
|
|
depends on PHYLIB
|
|
help
|
|
If set, allows Enable 802.3(clause 45) MDIO interface registers access
|
|
The MDIO interface is orthogonal to the MII interface and extends
|
|
it by adding access to more registers through indirect addressing.
|
|
|
|
config CMD_PING
|
|
bool "ping"
|
|
help
|
|
Send ICMP ECHO_REQUEST to network host
|
|
|
|
config CMD_PING6
|
|
bool "ping6"
|
|
depends on IPV6
|
|
default y if (CMD_PING && IPV6)
|
|
help
|
|
Send ICMPv6 ECHO_REQUEST to network host
|
|
|
|
config CMD_CDP
|
|
bool "cdp"
|
|
help
|
|
Perform CDP network configuration
|
|
|
|
config CMD_SNTP
|
|
bool "sntp"
|
|
select PROT_UDP
|
|
help
|
|
Synchronize RTC via network
|
|
|
|
config CMD_DNS
|
|
bool "dns"
|
|
help
|
|
Lookup the IP of a hostname
|
|
|
|
config CMD_LINK_LOCAL
|
|
bool "linklocal"
|
|
select LIB_RAND
|
|
help
|
|
Acquire a network IP address using the link-local protocol
|
|
|
|
config CMD_NCSI
|
|
bool "ncsi"
|
|
depends on PHY_NCSI
|
|
help
|
|
Manually configure the attached NIC via NC-SI.
|
|
Normally this happens automatically before other network
|
|
operations.
|
|
|
|
config IPV6_ROUTER_DISCOVERY
|
|
bool "Do IPv6 router discovery"
|
|
depends on IPV6
|
|
help
|
|
Will automatically perform router solicitation on first IPv6
|
|
network operation
|
|
endif
|
|
|
|
config CMD_ETHSW
|
|
bool "ethsw"
|
|
help
|
|
Allow control of L2 Ethernet switch commands. These are supported
|
|
by the vsc9953 Ethernet driver at present. Sub-commands allow
|
|
operations such as enabling / disabling a port and
|
|
viewing/maintaining the filtering database (FDB)
|
|
|
|
config CMD_PXE
|
|
bool "pxe"
|
|
select PXE_UTILS
|
|
help
|
|
Boot image via network using PXE protocol
|
|
|
|
config CMD_WOL
|
|
bool "wol"
|
|
help
|
|
Wait for wake-on-lan Magic Packet
|
|
|
|
endif
|
|
|
|
menu "Misc commands"
|
|
|
|
config CMD_2048
|
|
bool "Play 2048"
|
|
help
|
|
This is a simple sliding block puzzle game designed by Italian web
|
|
developer Gabriele Cirulli. The game's objective is to slide numbered
|
|
tiles on a grid to combine them to create a tile with the number
|
|
2048.
|
|
|
|
This needs ANSI support on your terminal to work. It is not fully
|
|
functional on a video device.
|
|
|
|
config CMD_BMP
|
|
bool "Enable 'bmp' command"
|
|
depends on VIDEO
|
|
select BMP
|
|
help
|
|
This provides a way to obtain information about a BMP-format image
|
|
and to display it. BMP (which presumably stands for BitMaP) is a
|
|
file format defined by Microsoft which supports images of various
|
|
depths, formats and compression methods. Headers on the file
|
|
determine the formats used. This command can be used by first loading
|
|
the image into RAM, then using this command to look at it or display
|
|
it.
|
|
|
|
config CMD_BOOTCOUNT
|
|
bool "bootcount"
|
|
depends on BOOTCOUNT_LIMIT
|
|
help
|
|
Enable the bootcount command, which allows interrogation and
|
|
reset of the bootcounter.
|
|
|
|
config CMD_BSP
|
|
bool "Enable board-specific commands"
|
|
help
|
|
(deprecated: instead, please define a Kconfig option for each command)
|
|
|
|
Some boards have board-specific commands which are only enabled
|
|
during developemnt and need to be turned off for production. This
|
|
option provides a way to control this. The commands that are enabled
|
|
vary depending on the board.
|
|
|
|
config CMD_BLOCK_CACHE
|
|
bool "blkcache - control and stats for block cache"
|
|
depends on BLOCK_CACHE
|
|
default y if BLOCK_CACHE
|
|
help
|
|
Enable the blkcache command, which can be used to control the
|
|
operation of the cache functions.
|
|
This is most useful when fine-tuning the operation of the cache
|
|
during development, but also allows the cache to be disabled when
|
|
it might hurt performance (e.g. when using the ums command).
|
|
|
|
config CMD_BLKMAP
|
|
bool "blkmap - Composable virtual block devices"
|
|
depends on BLKMAP
|
|
default y if BLKMAP
|
|
help
|
|
Create virtual block devices that are backed by various sources,
|
|
e.g. RAM, or parts of an existing block device. Though much more
|
|
rudimentary, it borrows a lot of ideas from Linux's device mapper
|
|
subsystem.
|
|
|
|
Example use-cases:
|
|
- Treat a region of RAM as a block device, i.e. a RAM disk. This let's
|
|
you extract files from filesystem images stored in RAM (perhaps as a
|
|
result of a TFTP transfer).
|
|
- Create a virtual partition on an existing device. This let's you
|
|
access filesystems that aren't stored at an exact partition
|
|
boundary. A common example is a filesystem image embedded in an FIT
|
|
image.
|
|
|
|
config CMD_BUTTON
|
|
bool "button"
|
|
depends on BUTTON
|
|
default y if BUTTON
|
|
help
|
|
Enable the 'button' command which allows to get the status of
|
|
buttons supported by the board. The buttonss can be listed with
|
|
'button list' and state can be known with 'button <label>'.
|
|
Any button drivers can be controlled with this command, e.g.
|
|
button_gpio.
|
|
|
|
config CMD_CACHE
|
|
bool "icache or dcache"
|
|
help
|
|
Enable the "icache" and "dcache" commands
|
|
|
|
config CMD_CONITRACE
|
|
bool "conitrace - trace console input codes"
|
|
help
|
|
Enable the 'conitrace' command which displays the codes received
|
|
from the console input as hexadecimal numbers.
|
|
|
|
config CMD_CLS
|
|
bool "Enable clear screen command 'cls'"
|
|
default y if LCD || VIDEO
|
|
help
|
|
Enable the 'cls' command which clears the screen contents
|
|
on video frame buffer.
|
|
|
|
config CMD_EFIDEBUG
|
|
bool "efidebug - display/configure UEFI environment"
|
|
depends on EFI_LOADER
|
|
select EFI_DEVICE_PATH_TO_TEXT
|
|
help
|
|
Enable the 'efidebug' command which provides a subset of UEFI
|
|
shell utility with simplified functionality. It will be useful
|
|
particularly for managing boot parameters as well as examining
|
|
various EFI status for debugging.
|
|
|
|
config CMD_EFICONFIG
|
|
bool "eficonfig - provide menu-driven uefi variables maintenance interface"
|
|
default y if !HAS_BOARD_SIZE_LIMIT
|
|
depends on CMD_BOOTEFI_BOOTMGR
|
|
select MENU
|
|
help
|
|
Enable the 'eficonfig' command which provides the menu-driven UEFI
|
|
variable maintenance interface.
|
|
|
|
config CMD_EXCEPTION
|
|
bool "exception - raise exception"
|
|
depends on ARM || RISCV || SANDBOX || X86
|
|
help
|
|
Enable the 'exception' command which allows to raise an exception.
|
|
|
|
config CMD_LED
|
|
bool "led"
|
|
depends on LED
|
|
default y if LED
|
|
help
|
|
Enable the 'led' command which allows for control of LEDs supported
|
|
by the board. The LEDs can be listed with 'led list' and controlled
|
|
with led on/off/togle/blink. Any LED drivers can be controlled with
|
|
this command, e.g. led_gpio.
|
|
|
|
config CMD_INI
|
|
bool "ini"
|
|
help
|
|
Enable the 'ini' command which allows a .ini file to be parsed and
|
|
placed into environment variables. Please check the source code for
|
|
this as there is no documentation.
|
|
|
|
config CMD_DATE
|
|
bool "date"
|
|
default y if DM_RTC
|
|
select LIB_DATE
|
|
help
|
|
Enable the 'date' command for getting/setting the time/date in RTC
|
|
devices.
|
|
|
|
config CMD_RTC
|
|
bool "rtc"
|
|
depends on DM_RTC
|
|
help
|
|
Enable the 'rtc' command for low-level access to RTC devices.
|
|
|
|
config CMD_TIME
|
|
bool "time"
|
|
help
|
|
Run commands and summarize execution time.
|
|
|
|
config CMD_GETTIME
|
|
bool "gettime - read elapsed time"
|
|
help
|
|
Enable the 'gettime' command which reads the elapsed time since
|
|
U-Boot started running. This shows the time in seconds and
|
|
milliseconds. See also the 'bootstage' command which provides more
|
|
flexibility for boot timing.
|
|
|
|
config CMD_PAUSE
|
|
bool "pause command"
|
|
help
|
|
Delay execution waiting for any user input.
|
|
Useful to allow the user to read a failure log.
|
|
|
|
config CMD_RNG
|
|
bool "rng command"
|
|
depends on DM_RNG
|
|
default y if SANDBOX
|
|
select HEXDUMP
|
|
help
|
|
Print bytes from the hardware random number generator.
|
|
|
|
config CMD_KASLRSEED
|
|
bool "kaslrseed"
|
|
depends on DM_RNG
|
|
help
|
|
Set the kaslr-seed in the chosen node with entropy provided by a
|
|
hardware random number generator.
|
|
|
|
config CMD_SLEEP
|
|
bool "sleep"
|
|
default y
|
|
help
|
|
Delay execution for some time
|
|
|
|
config CMD_MP
|
|
bool "support for multiprocessor commands"
|
|
depends on MP
|
|
default y
|
|
help
|
|
This enables commands to bringup different processors
|
|
in multiprocessor cases.
|
|
|
|
config CMD_TIMER
|
|
bool "timer"
|
|
help
|
|
Access the system timer.
|
|
|
|
config CMD_SOUND
|
|
bool "sound"
|
|
depends on SOUND
|
|
help
|
|
This provides basic access to the U-Boot's sound support. The main
|
|
feature is to play a beep.
|
|
|
|
sound init - set up sound system
|
|
sound play - play a sound
|
|
|
|
config CMD_SYSBOOT
|
|
bool "sysboot"
|
|
select PXE_UTILS
|
|
help
|
|
Boot image via local extlinux.conf file
|
|
|
|
config CMD_QFW
|
|
bool "qfw"
|
|
select QFW
|
|
help
|
|
This provides access to the QEMU firmware interface. The main
|
|
feature is to allow easy loading of files passed to qemu-system
|
|
via -kernel / -initrd
|
|
|
|
config CMD_PSTORE
|
|
bool "pstore"
|
|
help
|
|
This provides access to Linux PStore with Rammoops backend. The main
|
|
feature is to allow to display or save PStore records.
|
|
|
|
See doc/pstore.rst for more information.
|
|
|
|
if CMD_PSTORE
|
|
|
|
config CMD_PSTORE_MEM_ADDR
|
|
hex "Memory Address"
|
|
depends on CMD_PSTORE
|
|
help
|
|
Base addr used for PStore ramoops memory, should be identical to
|
|
ramoops.mem_address parameter used by kernel
|
|
|
|
config CMD_PSTORE_MEM_SIZE
|
|
hex "Memory size"
|
|
depends on CMD_PSTORE
|
|
default "0x10000"
|
|
help
|
|
Size of PStore ramoops memory, should be identical to ramoops.mem_size
|
|
parameter used by kernel, a power of 2 and larger than the sum of the
|
|
record sizes
|
|
|
|
config CMD_PSTORE_RECORD_SIZE
|
|
hex "Dump record size"
|
|
depends on CMD_PSTORE
|
|
default "0x1000"
|
|
help
|
|
Size of each dump done on oops/panic, should be identical to
|
|
ramoops.record_size parameter used by kernel and a power of 2
|
|
Must be non-zero
|
|
|
|
config CMD_PSTORE_CONSOLE_SIZE
|
|
hex "Kernel console log size"
|
|
depends on CMD_PSTORE
|
|
default "0x1000"
|
|
help
|
|
Size of kernel console log, should be identical to
|
|
ramoops.console_size parameter used by kernel and a power of 2
|
|
Must be non-zero
|
|
|
|
config CMD_PSTORE_FTRACE_SIZE
|
|
hex "FTrace log size"
|
|
depends on CMD_PSTORE
|
|
default "0x1000"
|
|
help
|
|
Size of ftrace log, should be identical to ramoops.ftrace_size
|
|
parameter used by kernel and a power of 2
|
|
|
|
config CMD_PSTORE_PMSG_SIZE
|
|
hex "User space message log size"
|
|
depends on CMD_PSTORE
|
|
default "0x1000"
|
|
help
|
|
Size of user space message log, should be identical to
|
|
ramoops.pmsg_size parameter used by kernel and a power of 2
|
|
|
|
config CMD_PSTORE_ECC_SIZE
|
|
int "ECC size"
|
|
depends on CMD_PSTORE
|
|
default "0"
|
|
help
|
|
if non-zero, the option enables ECC support and specifies ECC buffer
|
|
size in bytes (1 is a special value, means 16 bytes ECC), should be
|
|
identical to ramoops.ramoops_ecc parameter used by kernel
|
|
|
|
endif
|
|
|
|
source "cmd/mvebu/Kconfig"
|
|
|
|
config CMD_TERMINAL
|
|
bool "terminal - provides a way to attach a serial terminal"
|
|
help
|
|
Provides a 'cu'-like serial terminal command. This can be used to
|
|
access other serial ports from the system console. The terminal
|
|
is very simple with no special processing of characters. As with
|
|
cu, you can press ~. (tilde followed by period) to exit.
|
|
|
|
config CMD_UUID
|
|
bool "uuid, guid - generation of unique IDs"
|
|
select LIB_UUID
|
|
help
|
|
This enables two commands:
|
|
|
|
uuid - generate random Universally Unique Identifier
|
|
guid - generate Globally Unique Identifier based on random UUID
|
|
|
|
The two commands are very similar except for the endianness of the
|
|
output.
|
|
|
|
config CMD_VIDCONSOLE
|
|
bool "lcdputs and setcurs"
|
|
depends on VIDEO
|
|
default y
|
|
help
|
|
Enabling this will provide 'setcurs' and 'lcdputs' commands which
|
|
support cursor positioning and drawing strings on the video
|
|
console (framebuffer).
|
|
|
|
The name 'lcdputs' is a bit of a misnomer, but so named because the
|
|
video device is often an LCD.
|
|
|
|
config CMD_SELECT_FONT
|
|
bool "select font size"
|
|
depends on VIDEO
|
|
default n
|
|
help
|
|
Enabling this will provide 'font' command.
|
|
Allows font selection at runtime.
|
|
|
|
endmenu
|
|
|
|
source "cmd/ti/Kconfig"
|
|
|
|
config CMD_BOOTSTAGE
|
|
bool "Enable the 'bootstage' command"
|
|
depends on BOOTSTAGE
|
|
help
|
|
Add a 'bootstage' command which supports printing a report
|
|
and un/stashing of bootstage data.
|
|
|
|
menu "Power commands"
|
|
config CMD_PMIC
|
|
bool "Enable Driver Model PMIC command"
|
|
depends on DM_PMIC
|
|
help
|
|
This is the pmic command, based on a driver model pmic's API.
|
|
Command features are unchanged:
|
|
- list - list pmic devices
|
|
- pmic dev <id> - show or [set] operating pmic device (NEW)
|
|
- pmic dump - dump registers
|
|
- pmic read address - read byte of register at address
|
|
- pmic write address - write byte to register at address
|
|
The only one change for this command is 'dev' subcommand.
|
|
|
|
config CMD_REGULATOR
|
|
bool "Enable Driver Model REGULATOR command"
|
|
depends on DM_REGULATOR
|
|
help
|
|
This command is based on driver model regulator's API.
|
|
User interface features:
|
|
- list - list regulator devices
|
|
- regulator dev <id> - show or [set] operating regulator device
|
|
- regulator info - print constraints info
|
|
- regulator status - print operating status
|
|
- regulator value <val] <-f> - print/[set] voltage value [uV]
|
|
- regulator current <val> - print/[set] current value [uA]
|
|
- regulator mode <id> - print/[set] operating mode id
|
|
- regulator enable - enable the regulator output
|
|
- regulator disable - disable the regulator output
|
|
|
|
The '-f' (force) option can be used for set the value which exceeds
|
|
the limits, which are found in device-tree and are kept in regulator's
|
|
uclass plat structure.
|
|
|
|
endmenu
|
|
|
|
menu "Security commands"
|
|
config CMD_AES
|
|
bool "Enable the 'aes' command"
|
|
select AES
|
|
help
|
|
This provides a means to encrypt and decrypt data using the AES
|
|
(Advanced Encryption Standard). This algorithm uses a symetric key
|
|
and is widely used as a streaming cipher. Different key lengths are
|
|
supported by the algorithm but this command only supports 128 bits
|
|
at present.
|
|
|
|
config CMD_BLOB
|
|
bool "Enable the 'blob' command"
|
|
depends on !MX6ULL && !MX6SLL && !MX6SL
|
|
select IMX_HAB if ARCH_MX6 || ARCH_MX7 || ARCH_MX7ULP || ARCH_IMX8M
|
|
help
|
|
This is used with the Freescale secure boot mechanism.
|
|
|
|
Freescale's SEC block has built-in Blob Protocol which provides
|
|
a method for protecting user-defined data across system power
|
|
cycles. SEC block protects data in a data structure called a Blob,
|
|
which provides both confidentiality and integrity protection.
|
|
|
|
Encapsulating data as a blob
|
|
Each time that the Blob Protocol is used to protect data, a
|
|
different randomly generated key is used to encrypt the data.
|
|
This random key is itself encrypted using a key which is derived
|
|
from SoC's non-volatile secret key and a 16 bit Key identifier.
|
|
The resulting encrypted key along with encrypted data is called a
|
|
blob. The non-volatile secure key is available for use only during
|
|
secure boot.
|
|
|
|
During decapsulation, the reverse process is performed to get back
|
|
the original data.
|
|
|
|
Sub-commands:
|
|
blob enc - encapsulating data as a cryptgraphic blob
|
|
blob dec - decapsulating cryptgraphic blob to get the data
|
|
|
|
Syntax:
|
|
|
|
blob enc src dst len km
|
|
|
|
Encapsulate and create blob of data $len bytes long
|
|
at address $src and store the result at address $dst.
|
|
$km is the 16 byte key modifier is also required for
|
|
generation/use as key for cryptographic operation. Key
|
|
modifier should be 16 byte long.
|
|
|
|
blob dec src dst len km
|
|
|
|
Decapsulate the blob of data at address $src and
|
|
store result of $len byte at addr $dst.
|
|
$km is the 16 byte key modifier is also required for
|
|
generation/use as key for cryptographic operation. Key
|
|
modifier should be 16 byte long.
|
|
|
|
config CMD_HASH
|
|
bool "Support 'hash' command"
|
|
select HASH
|
|
help
|
|
This provides a way to hash data in memory using various supported
|
|
algorithms (such as SHA1, MD5, CRC32). The computed digest can be
|
|
saved to memory or to an environment variable. It is also possible
|
|
to verify a hash against data in memory.
|
|
|
|
config CMD_HVC
|
|
bool "Support the 'hvc' command"
|
|
depends on ARM_SMCCC
|
|
help
|
|
Allows issuing Hypervisor Calls (HVCs). Mostly useful for
|
|
development and testing.
|
|
|
|
config CMD_SMC
|
|
bool "Support the 'smc' command"
|
|
depends on ARM_SMCCC
|
|
help
|
|
Allows issuing Secure Monitor Calls (SMCs). Mostly useful for
|
|
development and testing.
|
|
|
|
config HASH_VERIFY
|
|
bool "hash -v"
|
|
depends on CMD_HASH
|
|
help
|
|
Add -v option to verify data against a hash.
|
|
|
|
config CMD_SCP03
|
|
bool "scp03 - SCP03 enable and rotate/provision operations"
|
|
depends on SCP03
|
|
help
|
|
This command provides access to a Trusted Application
|
|
running in a TEE to request Secure Channel Protocol 03
|
|
(SCP03) enablement and/or rotation of its SCP03 keys.
|
|
|
|
config CMD_TPM_V1
|
|
bool
|
|
|
|
config CMD_TPM_V2
|
|
bool
|
|
|
|
config CMD_TPM
|
|
bool "Enable the 'tpm' command"
|
|
depends on TPM_V1 || TPM_V2
|
|
select CMD_TPM_V1 if TPM_V1
|
|
select CMD_TPM_V2 if TPM_V2
|
|
help
|
|
This provides a means to talk to a TPM from the command line. A wide
|
|
range of commands if provided - see 'tpm help' for details. The
|
|
command requires a suitable TPM on your board and the correct driver
|
|
must be enabled.
|
|
|
|
if CMD_TPM
|
|
|
|
config CMD_TPM_TEST
|
|
bool "Enable the 'tpm test' command"
|
|
depends on TPM_V1
|
|
help
|
|
This provides a a series of tests to confirm that the TPMv1.x is
|
|
working correctly. The tests cover initialisation, non-volatile RAM,
|
|
extend, global lock and checking that timing is within expectations.
|
|
The tests pass correctly on Infineon TPMs but may need to be adjusted
|
|
for other devices.
|
|
|
|
endif
|
|
|
|
endmenu
|
|
|
|
menu "Firmware commands"
|
|
config CMD_CROS_EC
|
|
bool "Enable crosec command"
|
|
depends on CROS_EC
|
|
default y
|
|
help
|
|
Enable command-line access to the Chrome OS EC (Embedded
|
|
Controller). This provides the 'crosec' command which has
|
|
a number of sub-commands for performing EC tasks such as
|
|
updating its flash, accessing a small saved context area
|
|
and talking to the I2C bus behind the EC (if there is one).
|
|
endmenu
|
|
|
|
menu "Filesystem commands"
|
|
config CMD_BTRFS
|
|
bool "Enable the 'btrsubvol' command"
|
|
select FS_BTRFS
|
|
help
|
|
This enables the 'btrsubvol' command to list subvolumes
|
|
of a BTRFS filesystem. There are no special commands for
|
|
listing BTRFS directories or loading BTRFS files - this
|
|
can be done by the generic 'fs' commands (see CMD_FS_GENERIC)
|
|
when BTRFS is enabled (see FS_BTRFS).
|
|
|
|
config CMD_CBFS
|
|
bool "Enable the 'cbfs' command"
|
|
depends on FS_CBFS
|
|
help
|
|
Define this to enable support for reading from a Coreboot
|
|
filesystem. This is a ROM-based filesystem used for accessing files
|
|
on systems that use coreboot as the first boot-loader and then load
|
|
U-Boot to actually boot the Operating System. Available commands are
|
|
cbfsinit, cbfsinfo, cbfsls and cbfsload.
|
|
|
|
config CMD_CRAMFS
|
|
bool "Enable the 'cramfs' command"
|
|
depends on FS_CRAMFS
|
|
help
|
|
This provides commands for dealing with CRAMFS (Compressed ROM
|
|
filesystem). CRAMFS is useful when space is tight since files are
|
|
compressed. Two commands are provided:
|
|
|
|
cramfsls - lists files in a cramfs image
|
|
cramfsload - loads a file from a cramfs image
|
|
|
|
config CMD_EROFS
|
|
bool "EROFS command support"
|
|
select FS_EROFS
|
|
help
|
|
Support for the EROFS fs
|
|
|
|
config CMD_EXT2
|
|
bool "ext2 command support"
|
|
select FS_EXT4
|
|
help
|
|
Enables EXT2 FS command
|
|
|
|
config CMD_EXT4
|
|
bool "ext4 command support"
|
|
select FS_EXT4
|
|
help
|
|
Enables EXT4 FS command
|
|
|
|
config CMD_EXT4_WRITE
|
|
depends on CMD_EXT4
|
|
bool "ext4 write command support"
|
|
select EXT4_WRITE
|
|
help
|
|
Enables EXT4 FS write command
|
|
|
|
config CMD_FAT
|
|
bool "FAT command support"
|
|
select FS_FAT
|
|
help
|
|
Support for the FAT fs
|
|
|
|
config CMD_SQUASHFS
|
|
bool "SquashFS command support"
|
|
select FS_SQUASHFS
|
|
help
|
|
Enables SquashFS filesystem commands (e.g. load, ls).
|
|
|
|
config CMD_FS_GENERIC
|
|
bool "filesystem commands"
|
|
help
|
|
Enables filesystem commands (e.g. load, ls) that work for multiple
|
|
fs types.
|
|
|
|
config CMD_FS_UUID
|
|
bool "fsuuid command"
|
|
help
|
|
Enables fsuuid command for filesystem UUID.
|
|
|
|
config CMD_JFFS2
|
|
bool "jffs2 command"
|
|
select FS_JFFS2
|
|
help
|
|
Enables commands to support the JFFS2 (Journalling Flash File System
|
|
version 2) filesystem. This enables fsload, ls and fsinfo which
|
|
provide the ability to load files, list directories and obtain
|
|
filesystem information.
|
|
|
|
config JFFS2_DEV
|
|
string "Default device for JFFS2"
|
|
depends on CMD_JFFS2
|
|
default "nor0"
|
|
help
|
|
The default device to use with the jffs2 command.
|
|
|
|
config JFFS2_PART_OFFSET
|
|
hex "Default offset within flash to locate the JFFS2 image"
|
|
depends on CMD_JFFS2
|
|
default 0x0
|
|
help
|
|
The default offset within flash to locate the JFFS2 image.
|
|
|
|
config JFFS2_PART_SIZE
|
|
hex "Default size of JFFS2 partition"
|
|
depends on CMD_JFFS2
|
|
default 0xFFFFFFFF
|
|
help
|
|
The default size of the JFFS2 partition
|
|
|
|
config CMD_MTDPARTS
|
|
bool "MTD partition support"
|
|
depends on MTD
|
|
help
|
|
MTD partitioning tool support.
|
|
It is strongly encouraged to avoid using this command
|
|
anymore along with 'sf', 'nand', 'onenand'. One can still
|
|
declare the partitions in the mtdparts environment variable
|
|
but better use the MTD stack and the 'mtd' command instead.
|
|
|
|
config CMD_MTDPARTS_SPREAD
|
|
bool "Padd partition size to take account of bad blocks"
|
|
depends on CMD_MTDPARTS
|
|
help
|
|
This enables the 'spread' sub-command of the mtdparts command.
|
|
This command will modify the existing mtdparts variable by increasing
|
|
the size of the partitions such that 1) each partition's net size is
|
|
at least as large as the size specified in the mtdparts variable and
|
|
2) each partition starts on a good block.
|
|
|
|
config CMD_MTDPARTS_SHOW_NET_SIZES
|
|
bool "Show net size (w/o bad blocks) of partitions"
|
|
depends on CMD_MTDPARTS
|
|
help
|
|
Adds two columns to the printed partition table showing the
|
|
effective usable size of a partition, if bad blocks are taken
|
|
into account.
|
|
|
|
config MTDIDS_DEFAULT
|
|
string "Default MTD IDs"
|
|
depends on MTD || SPI_FLASH
|
|
depends on !SYS_MTDPARTS_RUNTIME
|
|
help
|
|
Defines a default MTD IDs list for use with MTD partitions in the
|
|
Linux MTD command line partitions format.
|
|
|
|
config MTDPARTS_DEFAULT
|
|
string "Default MTD partition scheme"
|
|
depends on MTD || SPI_FLASH
|
|
depends on !SYS_MTDPARTS_RUNTIME
|
|
help
|
|
Defines a default MTD partitioning scheme in the Linux MTD command
|
|
line partitions format
|
|
|
|
config CMD_REISER
|
|
bool "reiser - Access to reiserfs filesystems"
|
|
help
|
|
This provides two commands which operate on a resierfs filesystem,
|
|
commonly used some years ago:
|
|
|
|
reiserls - list files
|
|
reiserload - load a file
|
|
|
|
config CMD_YAFFS2
|
|
bool "yaffs2 - Access of YAFFS2 filesystem"
|
|
depends on YAFFS2
|
|
default y
|
|
help
|
|
This provides commands for accessing a YAFFS2 filesystem. Yet
|
|
Another Flash Filesystem 2 is a filesystem designed specifically
|
|
for NAND flash. It incorporates bad-block management and ensures
|
|
that device writes are sequential regardless of filesystem
|
|
activity.
|
|
|
|
config CMD_ZFS
|
|
bool "zfs - Access of ZFS filesystem"
|
|
help
|
|
This provides commands to accessing a ZFS filesystem, commonly used
|
|
on Solaris systems. Two sub-commands are provided:
|
|
|
|
zfsls - list files in a directory
|
|
zfsload - load a file
|
|
|
|
See doc/README.zfs for more details.
|
|
|
|
endmenu
|
|
|
|
menu "Debug commands"
|
|
|
|
config CMD_CBSYSINFO
|
|
bool "cbsysinfo"
|
|
depends on X86
|
|
default y if SYS_COREBOOT
|
|
help
|
|
This provides information about the coreboot sysinfo table stored in
|
|
memory by coreboot before jumping to U-Boot. It can be useful for
|
|
debugging the beaaviour of coreboot or U-Boot.
|
|
|
|
config CMD_CYCLIC
|
|
bool "cyclic - Show information about cyclic functions"
|
|
depends on CYCLIC
|
|
default y
|
|
help
|
|
This enables the 'cyclic' command which provides information about
|
|
cyclic execution functions. This infrastructure allows registering
|
|
functions to be executed cyclically, e.g. every 100ms. These commands
|
|
are supported:
|
|
|
|
cyclic list - list cyclic functions
|
|
cyclic cyclic demo <cycletime_ms> <delay_us> - register cyclic
|
|
demo function
|
|
|
|
See doc/develop/cyclic.rst for more details.
|
|
|
|
config CMD_DIAG
|
|
bool "diag - Board diagnostics"
|
|
help
|
|
This command provides access to board diagnostic tests. These are
|
|
called Power-on Self Tests (POST). The command allows listing of
|
|
available tests and running either all the tests, or specific tests
|
|
identified by name.
|
|
|
|
config CMD_EVENT
|
|
bool "event - Show information about events"
|
|
depends on EVENT
|
|
default y if EVENT_DEBUG
|
|
help
|
|
This enables the 'event' command which provides information about
|
|
events and event-handler routines. This can help to device event
|
|
hadling.
|
|
|
|
config CMD_IRQ
|
|
bool "irq - Show information about interrupts"
|
|
depends on !ARM && !MIPS && !RISCV && !SH
|
|
help
|
|
This enables two commands:
|
|
|
|
interrupts - enable or disable interrupts
|
|
irqinfo - print device-specific interrupt information
|
|
|
|
config CMD_KGDB
|
|
bool "kgdb - Allow debugging of U-Boot with gdb"
|
|
depends on PPC
|
|
help
|
|
This enables a 'kgdb' command which allows gdb to connect to U-Boot
|
|
over a serial link for debugging purposes. This allows
|
|
single-stepping, inspecting variables, etc. This is supported only
|
|
on PowerPC at present.
|
|
|
|
config CMD_LOG
|
|
bool "log - Generation, control and access to logging"
|
|
select LOG
|
|
select GETOPT
|
|
help
|
|
This provides access to logging features. It allows the output of
|
|
log data to be controlled to a limited extent (setting up the default
|
|
maximum log level for emitting of records). It also provides access
|
|
to a command used for testing the log system.
|
|
|
|
config CMD_TRACE
|
|
bool "trace - Support tracing of function calls and timing"
|
|
depends on TRACE
|
|
default y
|
|
help
|
|
Enables a command to control using of function tracing within
|
|
U-Boot. This allows recording of call traces including timing
|
|
information. The command can write data to memory for exporting
|
|
for analysis (e.g. using bootchart). See doc/README.trace for full
|
|
details.
|
|
|
|
config CMD_AVB
|
|
bool "avb - Android Verified Boot 2.0 operations"
|
|
depends on AVB_VERIFY
|
|
help
|
|
Enables a "avb" command to perform verification of partitions using
|
|
Android Verified Boot 2.0 functionality. It includes such subcommands:
|
|
avb init - initialize avb2 subsystem
|
|
avb read_rb - read rollback index
|
|
avb write_rb - write rollback index
|
|
avb is_unlocked - check device lock state
|
|
avb get_uuid - read and print uuid of a partition
|
|
avb read_part - read data from partition
|
|
avb read_part_hex - read data from partition and output to stdout
|
|
avb write_part - write data to partition
|
|
avb verify - run full verification chain
|
|
|
|
config CMD_STACKPROTECTOR_TEST
|
|
bool "Test command for stack protector"
|
|
depends on STACKPROTECTOR
|
|
help
|
|
Enable stackprot_test command
|
|
The stackprot_test command will force a stack overrun to test
|
|
the stack smashing detection mechanisms.
|
|
|
|
endmenu
|
|
|
|
config CMD_UBI
|
|
tristate "Enable UBI - Unsorted block images commands"
|
|
select MTD_UBI
|
|
help
|
|
UBI is a software layer above MTD layer which admits use of LVM-like
|
|
logical volumes on top of MTD devices, hides some complexities of
|
|
flash chips like wear and bad blocks and provides some other useful
|
|
capabilities. Please, consult the MTD web site for more details
|
|
(www.linux-mtd.infradead.org). Activate this option if you want
|
|
to use U-Boot UBI commands.
|
|
It is also strongly encouraged to also enable CONFIG_MTD to get full
|
|
partition support.
|
|
|
|
config CMD_UBI_RENAME
|
|
bool "Enable rename"
|
|
depends on CMD_UBI
|
|
help
|
|
Enable a "ubi" command to rename ubi volume:
|
|
ubi rename <oldname> <newname>
|
|
|
|
config CMD_UBIFS
|
|
tristate "Enable UBIFS - Unsorted block images filesystem commands"
|
|
depends on CMD_UBI
|
|
default y if CMD_UBI
|
|
select LZO
|
|
select GZIP
|
|
help
|
|
UBIFS is a file system for flash devices which works on top of UBI.
|
|
|
|
config MMC_SPEED_MODE_SET
|
|
bool "set speed mode using mmc command"
|
|
depends on CMD_MMC
|
|
default n
|
|
help
|
|
Enable setting speed mode using mmc rescan and mmc dev commands.
|
|
The speed mode is provided as the last argument in these commands
|
|
and is indicated using the index from enum bus_mode in
|
|
include/mmc.h. A speed mode can be set only if it has already
|
|
been enabled in the device tree.
|
|
|
|
config CMD_MESON
|
|
bool "Amlogic Meson commands"
|
|
depends on ARCH_MESON
|
|
default y
|
|
help
|
|
Enable useful commands for the Meson Soc family developed by Amlogic Inc.
|
|
endmenu
|