mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 07:13:03 +00:00
4d4fbf0415
Sync Amlogic GXBB, GXL & GXM DTs from Linux v6.4, and also switch to GXL MDIO MUX driver to adapt to DT change, Most of the changes are only cosmetic or doesn't concern U-Boot, the most important change for U-Boot is the GXL mdio mux compatible switch to amlogic,gxl-mdio-mux. Link: https://lore.kernel.org/r/20231213-u-boot-gxl-mdio-mux-v2-2-c56bb02a75ea@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
940 lines
18 KiB
Text
940 lines
18 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2016 Endless Computers, Inc.
|
|
* Author: Carlo Caione <carlo@endlessm.com>
|
|
*/
|
|
|
|
#include "meson-gx.dtsi"
|
|
#include <dt-bindings/clock/gxbb-clkc.h>
|
|
#include <dt-bindings/clock/gxbb-aoclkc.h>
|
|
#include <dt-bindings/gpio/meson-gxl-gpio.h>
|
|
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
|
|
|
|
/ {
|
|
compatible = "amlogic,meson-gxl";
|
|
|
|
soc {
|
|
usb: usb@d0078080 {
|
|
compatible = "amlogic,meson-gxl-usb-ctrl";
|
|
reg = <0x0 0xd0078080 0x0 0x20>;
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
|
|
clock-names = "usb_ctrl", "ddr";
|
|
resets = <&reset RESET_USB_OTG>;
|
|
|
|
dr_mode = "otg";
|
|
|
|
phys = <&usb2_phy0>, <&usb2_phy1>;
|
|
phy-names = "usb2-phy0", "usb2-phy1";
|
|
|
|
dwc2: usb@c9100000 {
|
|
compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
|
|
reg = <0x0 0xc9100000 0x0 0x40000>;
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clkc CLKID_USB1>;
|
|
clock-names = "otg";
|
|
phys = <&usb2_phy1>;
|
|
dr_mode = "peripheral";
|
|
g-rx-fifo-size = <192>;
|
|
g-np-tx-fifo-size = <128>;
|
|
g-tx-fifo-size = <128 128 16 16 16>;
|
|
};
|
|
|
|
dwc3: usb@c9000000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x0 0xc9000000 0x0 0x100000>;
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
|
dr_mode = "host";
|
|
maximum-speed = "high-speed";
|
|
snps,dis_u2_susphy_quirk;
|
|
};
|
|
};
|
|
|
|
acodec: audio-controller@c8832000 {
|
|
compatible = "amlogic,t9015";
|
|
reg = <0x0 0xc8832000 0x0 0x14>;
|
|
#sound-dai-cells = <0>;
|
|
sound-name-prefix = "ACODEC";
|
|
clocks = <&clkc CLKID_ACODEC>;
|
|
clock-names = "pclk";
|
|
resets = <&reset RESET_ACODEC>;
|
|
status = "disabled";
|
|
};
|
|
|
|
crypto: crypto@c883e000 {
|
|
compatible = "amlogic,gxl-crypto";
|
|
reg = <0x0 0xc883e000 0x0 0x36>;
|
|
interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&clkc CLKID_BLKMV>;
|
|
clock-names = "blkmv";
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
&aiu {
|
|
compatible = "amlogic,aiu-gxl", "amlogic,aiu";
|
|
clocks = <&clkc CLKID_AIU_GLUE>,
|
|
<&clkc CLKID_I2S_OUT>,
|
|
<&clkc CLKID_AOCLK_GATE>,
|
|
<&clkc CLKID_CTS_AMCLK>,
|
|
<&clkc CLKID_MIXER_IFACE>,
|
|
<&clkc CLKID_IEC958>,
|
|
<&clkc CLKID_IEC958_GATE>,
|
|
<&clkc CLKID_CTS_MCLK_I958>,
|
|
<&clkc CLKID_CTS_I958>;
|
|
clock-names = "pclk",
|
|
"i2s_pclk",
|
|
"i2s_aoclk",
|
|
"i2s_mclk",
|
|
"i2s_mixer",
|
|
"spdif_pclk",
|
|
"spdif_aoclk",
|
|
"spdif_mclk",
|
|
"spdif_mclk_sel";
|
|
resets = <&reset RESET_AIU>;
|
|
};
|
|
|
|
&apb {
|
|
usb2_phy0: phy@78000 {
|
|
compatible = "amlogic,meson-gxl-usb2-phy";
|
|
#phy-cells = <0>;
|
|
reg = <0x0 0x78000 0x0 0x20>;
|
|
clocks = <&clkc CLKID_USB>;
|
|
clock-names = "phy";
|
|
resets = <&reset RESET_USB_OTG>;
|
|
reset-names = "phy";
|
|
status = "okay";
|
|
};
|
|
|
|
usb2_phy1: phy@78020 {
|
|
compatible = "amlogic,meson-gxl-usb2-phy";
|
|
#phy-cells = <0>;
|
|
reg = <0x0 0x78020 0x0 0x20>;
|
|
clocks = <&clkc CLKID_USB>;
|
|
clock-names = "phy";
|
|
resets = <&reset RESET_USB_OTG>;
|
|
reset-names = "phy";
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&efuse {
|
|
clocks = <&clkc CLKID_EFUSE>;
|
|
};
|
|
|
|
ðmac {
|
|
clocks = <&clkc CLKID_ETH>,
|
|
<&clkc CLKID_FCLK_DIV2>,
|
|
<&clkc CLKID_MPLL2>,
|
|
<&clkc CLKID_FCLK_DIV2>;
|
|
clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
|
|
|
|
mdio0: mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,dwmac-mdio";
|
|
};
|
|
};
|
|
|
|
&aobus {
|
|
pinctrl_aobus: pinctrl@14 {
|
|
compatible = "amlogic,meson-gxl-aobus-pinctrl";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
gpio_ao: bank@14 {
|
|
reg = <0x0 0x00014 0x0 0x8>,
|
|
<0x0 0x0002c 0x0 0x4>,
|
|
<0x0 0x00024 0x0 0x8>;
|
|
reg-names = "mux", "pull", "gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&pinctrl_aobus 0 0 14>;
|
|
};
|
|
|
|
uart_ao_a_pins: uart_ao_a {
|
|
mux {
|
|
groups = "uart_tx_ao_a", "uart_rx_ao_a";
|
|
function = "uart_ao";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
|
|
mux {
|
|
groups = "uart_cts_ao_a",
|
|
"uart_rts_ao_a";
|
|
function = "uart_ao";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
uart_ao_b_pins: uart_ao_b {
|
|
mux {
|
|
groups = "uart_tx_ao_b", "uart_rx_ao_b";
|
|
function = "uart_ao_b";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
uart_ao_b_0_1_pins: uart_ao_b_0_1 {
|
|
mux {
|
|
groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
|
|
function = "uart_ao_b";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
|
|
mux {
|
|
groups = "uart_cts_ao_b",
|
|
"uart_rts_ao_b";
|
|
function = "uart_ao_b";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
remote_input_ao_pins: remote_input_ao {
|
|
mux {
|
|
groups = "remote_input_ao";
|
|
function = "remote_input_ao";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c_ao_pins: i2c_ao {
|
|
mux {
|
|
groups = "i2c_sck_ao",
|
|
"i2c_sda_ao";
|
|
function = "i2c_ao";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pwm_ao_a_3_pins: pwm_ao_a_3 {
|
|
mux {
|
|
groups = "pwm_ao_a_3";
|
|
function = "pwm_ao_a";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pwm_ao_a_8_pins: pwm_ao_a_8 {
|
|
mux {
|
|
groups = "pwm_ao_a_8";
|
|
function = "pwm_ao_a";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pwm_ao_b_pins: pwm_ao_b {
|
|
mux {
|
|
groups = "pwm_ao_b";
|
|
function = "pwm_ao_b";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pwm_ao_b_6_pins: pwm_ao_b_6 {
|
|
mux {
|
|
groups = "pwm_ao_b_6";
|
|
function = "pwm_ao_b";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
|
|
mux {
|
|
groups = "i2s_out_ch23_ao";
|
|
function = "i2s_out_ao";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
|
|
mux {
|
|
groups = "i2s_out_ch45_ao";
|
|
function = "i2s_out_ao";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
spdif_out_ao_6_pins: spdif_out_ao_6 {
|
|
mux {
|
|
groups = "spdif_out_ao_6";
|
|
function = "spdif_out_ao";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
spdif_out_ao_9_pins: spdif_out_ao_9 {
|
|
mux {
|
|
groups = "spdif_out_ao_9";
|
|
function = "spdif_out_ao";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
ao_cec_pins: ao_cec {
|
|
mux {
|
|
groups = "ao_cec";
|
|
function = "cec_ao";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
ee_cec_pins: ee_cec {
|
|
mux {
|
|
groups = "ee_cec";
|
|
function = "cec_ao";
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&cec_AO {
|
|
clocks = <&clkc_AO CLKID_AO_CEC_32K>;
|
|
clock-names = "core";
|
|
};
|
|
|
|
&clkc_AO {
|
|
compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc";
|
|
clocks = <&xtal>, <&clkc CLKID_CLK81>;
|
|
clock-names = "xtal", "mpeg-clk";
|
|
};
|
|
|
|
&gpio_intc {
|
|
compatible = "amlogic,meson-gxl-gpio-intc",
|
|
"amlogic,meson-gpio-intc";
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_tx {
|
|
compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
|
|
resets = <&reset RESET_HDMITX_CAPB3>,
|
|
<&reset RESET_HDMI_SYSTEM_RESET>,
|
|
<&reset RESET_HDMI_TX>;
|
|
reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
|
|
clocks = <&clkc CLKID_HDMI_PCLK>,
|
|
<&clkc CLKID_CLK81>,
|
|
<&clkc CLKID_GCLK_VENCI_INT0>;
|
|
clock-names = "isfr", "iahb", "venci";
|
|
};
|
|
|
|
&sysctrl {
|
|
clkc: clock-controller {
|
|
compatible = "amlogic,gxl-clkc";
|
|
#clock-cells = <1>;
|
|
clocks = <&xtal>;
|
|
clock-names = "xtal";
|
|
};
|
|
};
|
|
|
|
&hwrng {
|
|
clocks = <&clkc CLKID_RNG0>;
|
|
clock-names = "core";
|
|
};
|
|
|
|
&i2c_A {
|
|
clocks = <&clkc CLKID_I2C>;
|
|
};
|
|
|
|
&i2c_AO {
|
|
clocks = <&clkc CLKID_AO_I2C>;
|
|
};
|
|
|
|
&i2c_B {
|
|
clocks = <&clkc CLKID_I2C>;
|
|
};
|
|
|
|
&i2c_C {
|
|
clocks = <&clkc CLKID_I2C>;
|
|
};
|
|
|
|
&periphs {
|
|
pinctrl_periphs: pinctrl@4b0 {
|
|
compatible = "amlogic,meson-gxl-periphs-pinctrl";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
gpio: bank@4b0 {
|
|
reg = <0x0 0x004b0 0x0 0x28>,
|
|
<0x0 0x004e8 0x0 0x14>,
|
|
<0x0 0x00520 0x0 0x14>,
|
|
<0x0 0x00430 0x0 0x40>;
|
|
reg-names = "mux", "pull", "pull-enable", "gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&pinctrl_periphs 0 0 100>;
|
|
};
|
|
|
|
emmc_pins: emmc {
|
|
mux-0 {
|
|
groups = "emmc_nand_d07",
|
|
"emmc_cmd";
|
|
function = "emmc";
|
|
bias-pull-up;
|
|
};
|
|
|
|
mux-1 {
|
|
groups = "emmc_clk";
|
|
function = "emmc";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
emmc_ds_pins: emmc-ds {
|
|
mux {
|
|
groups = "emmc_ds";
|
|
function = "emmc";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
emmc_clk_gate_pins: emmc_clk_gate {
|
|
mux {
|
|
groups = "BOOT_8";
|
|
function = "gpio_periphs";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
nor_pins: nor {
|
|
mux {
|
|
groups = "nor_d",
|
|
"nor_q",
|
|
"nor_c",
|
|
"nor_cs";
|
|
function = "nor";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
spi_pins: spi-pins {
|
|
mux {
|
|
groups = "spi_miso",
|
|
"spi_mosi",
|
|
"spi_sclk";
|
|
function = "spi";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
spi_idle_high_pins: spi-idle-high-pins {
|
|
mux {
|
|
groups = "spi_sclk";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
spi_idle_low_pins: spi-idle-low-pins {
|
|
mux {
|
|
groups = "spi_sclk";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
spi_ss0_pins: spi-ss0 {
|
|
mux {
|
|
groups = "spi_ss0";
|
|
function = "spi";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
sdcard_pins: sdcard {
|
|
mux-0 {
|
|
groups = "sdcard_d0",
|
|
"sdcard_d1",
|
|
"sdcard_d2",
|
|
"sdcard_d3",
|
|
"sdcard_cmd";
|
|
function = "sdcard";
|
|
bias-pull-up;
|
|
};
|
|
|
|
mux-1 {
|
|
groups = "sdcard_clk";
|
|
function = "sdcard";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
sdcard_clk_gate_pins: sdcard_clk_gate {
|
|
mux {
|
|
groups = "CARD_2";
|
|
function = "gpio_periphs";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
sdio_pins: sdio {
|
|
mux-0 {
|
|
groups = "sdio_d0",
|
|
"sdio_d1",
|
|
"sdio_d2",
|
|
"sdio_d3",
|
|
"sdio_cmd";
|
|
function = "sdio";
|
|
bias-pull-up;
|
|
};
|
|
|
|
mux-1 {
|
|
groups = "sdio_clk";
|
|
function = "sdio";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
sdio_clk_gate_pins: sdio_clk_gate {
|
|
mux {
|
|
groups = "GPIOX_4";
|
|
function = "gpio_periphs";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
sdio_irq_pins: sdio_irq {
|
|
mux {
|
|
groups = "sdio_irq";
|
|
function = "sdio";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
uart_a_pins: uart_a {
|
|
mux {
|
|
groups = "uart_tx_a",
|
|
"uart_rx_a";
|
|
function = "uart_a";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
uart_a_cts_rts_pins: uart_a_cts_rts {
|
|
mux {
|
|
groups = "uart_cts_a",
|
|
"uart_rts_a";
|
|
function = "uart_a";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
uart_b_pins: uart_b {
|
|
mux {
|
|
groups = "uart_tx_b",
|
|
"uart_rx_b";
|
|
function = "uart_b";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
uart_b_cts_rts_pins: uart_b_cts_rts {
|
|
mux {
|
|
groups = "uart_cts_b",
|
|
"uart_rts_b";
|
|
function = "uart_b";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
uart_c_pins: uart_c {
|
|
mux {
|
|
groups = "uart_tx_c",
|
|
"uart_rx_c";
|
|
function = "uart_c";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
uart_c_cts_rts_pins: uart_c_cts_rts {
|
|
mux {
|
|
groups = "uart_cts_c",
|
|
"uart_rts_c";
|
|
function = "uart_c";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c_a_pins: i2c_a {
|
|
mux {
|
|
groups = "i2c_sck_a",
|
|
"i2c_sda_a";
|
|
function = "i2c_a";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c_b_pins: i2c_b {
|
|
mux {
|
|
groups = "i2c_sck_b",
|
|
"i2c_sda_b";
|
|
function = "i2c_b";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c_c_pins: i2c_c {
|
|
mux {
|
|
groups = "i2c_sck_c",
|
|
"i2c_sda_c";
|
|
function = "i2c_c";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c_c_dv18_pins: i2c_c_dv18 {
|
|
mux {
|
|
groups = "i2c_sck_c_dv19",
|
|
"i2c_sda_c_dv18";
|
|
function = "i2c_c";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
eth_pins: eth_c {
|
|
mux {
|
|
groups = "eth_mdio",
|
|
"eth_mdc",
|
|
"eth_clk_rx_clk",
|
|
"eth_rx_dv",
|
|
"eth_rxd0",
|
|
"eth_rxd1",
|
|
"eth_rxd2",
|
|
"eth_rxd3",
|
|
"eth_rgmii_tx_clk",
|
|
"eth_tx_en",
|
|
"eth_txd0",
|
|
"eth_txd1",
|
|
"eth_txd2",
|
|
"eth_txd3";
|
|
function = "eth";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
eth_link_led_pins: eth_link_led {
|
|
mux {
|
|
groups = "eth_link_led";
|
|
function = "eth_led";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
eth_act_led_pins: eth_act_led {
|
|
mux {
|
|
groups = "eth_act_led";
|
|
function = "eth_led";
|
|
};
|
|
};
|
|
|
|
pwm_a_pins: pwm_a {
|
|
mux {
|
|
groups = "pwm_a";
|
|
function = "pwm_a";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pwm_b_pins: pwm_b {
|
|
mux {
|
|
groups = "pwm_b";
|
|
function = "pwm_b";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pwm_c_pins: pwm_c {
|
|
mux {
|
|
groups = "pwm_c";
|
|
function = "pwm_c";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pwm_d_pins: pwm_d {
|
|
mux {
|
|
groups = "pwm_d";
|
|
function = "pwm_d";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pwm_e_pins: pwm_e {
|
|
mux {
|
|
groups = "pwm_e";
|
|
function = "pwm_e";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pwm_f_clk_pins: pwm_f_clk {
|
|
mux {
|
|
groups = "pwm_f_clk";
|
|
function = "pwm_f";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pwm_f_x_pins: pwm_f_x {
|
|
mux {
|
|
groups = "pwm_f_x";
|
|
function = "pwm_f";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
hdmi_hpd_pins: hdmi_hpd {
|
|
mux {
|
|
groups = "hdmi_hpd";
|
|
function = "hdmi_hpd";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
hdmi_i2c_pins: hdmi_i2c {
|
|
mux {
|
|
groups = "hdmi_sda", "hdmi_scl";
|
|
function = "hdmi_i2c";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2s_am_clk_pins: i2s_am_clk {
|
|
mux {
|
|
groups = "i2s_am_clk";
|
|
function = "i2s_out";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2s_out_ao_clk_pins: i2s_out_ao_clk {
|
|
mux {
|
|
groups = "i2s_out_ao_clk";
|
|
function = "i2s_out";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2s_out_lr_clk_pins: i2s_out_lr_clk {
|
|
mux {
|
|
groups = "i2s_out_lr_clk";
|
|
function = "i2s_out";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2s_out_ch01_pins: i2s_out_ch01 {
|
|
mux {
|
|
groups = "i2s_out_ch01";
|
|
function = "i2s_out";
|
|
bias-disable;
|
|
};
|
|
};
|
|
i2sout_ch23_z_pins: i2sout_ch23_z {
|
|
mux {
|
|
groups = "i2sout_ch23_z";
|
|
function = "i2s_out";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2sout_ch45_z_pins: i2sout_ch45_z {
|
|
mux {
|
|
groups = "i2sout_ch45_z";
|
|
function = "i2s_out";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2sout_ch67_z_pins: i2sout_ch67_z {
|
|
mux {
|
|
groups = "i2sout_ch67_z";
|
|
function = "i2s_out";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
spdif_out_h_pins: spdif_out_ao_h {
|
|
mux {
|
|
groups = "spdif_out_h";
|
|
function = "spdif_out";
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
eth_phy_mux: mdio@558 {
|
|
reg = <0x0 0x558 0x0 0xc>;
|
|
compatible = "amlogic,gxl-mdio-mux";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clkc CLKID_FCLK_DIV4>;
|
|
clock-names = "ref";
|
|
mdio-parent-bus = <&mdio0>;
|
|
|
|
external_mdio: mdio@0 {
|
|
reg = <0x0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
internal_mdio: mdio@1 {
|
|
reg = <0x1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
internal_phy: ethernet-phy@8 {
|
|
compatible = "ethernet-phy-id0181.4400";
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <8>;
|
|
max-speed = <100>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwrc {
|
|
resets = <&reset RESET_VIU>,
|
|
<&reset RESET_VENC>,
|
|
<&reset RESET_VCBUS>,
|
|
<&reset RESET_BT656>,
|
|
<&reset RESET_DVIN_RESET>,
|
|
<&reset RESET_RDMA>,
|
|
<&reset RESET_VENCI>,
|
|
<&reset RESET_VENCP>,
|
|
<&reset RESET_VDAC>,
|
|
<&reset RESET_VDI6>,
|
|
<&reset RESET_VENCL>,
|
|
<&reset RESET_VID_LOCK>;
|
|
reset-names = "viu", "venc", "vcbus", "bt656",
|
|
"dvin", "rdma", "venci", "vencp",
|
|
"vdac", "vdi6", "vencl", "vid_lock";
|
|
clocks = <&clkc CLKID_VPU>,
|
|
<&clkc CLKID_VAPB>;
|
|
clock-names = "vpu", "vapb";
|
|
/*
|
|
* VPU clocking is provided by two identical clock paths
|
|
* VPU_0 and VPU_1 muxed to a single clock by a glitch
|
|
* free mux to safely change frequency while running.
|
|
* Same for VAPB but with a final gate after the glitch free mux.
|
|
*/
|
|
assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
|
|
<&clkc CLKID_VPU_0>,
|
|
<&clkc CLKID_VPU>, /* Glitch free mux */
|
|
<&clkc CLKID_VAPB_0_SEL>,
|
|
<&clkc CLKID_VAPB_0>,
|
|
<&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
|
|
assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
|
|
<0>, /* Do Nothing */
|
|
<&clkc CLKID_VPU_0>,
|
|
<&clkc CLKID_FCLK_DIV4>,
|
|
<0>, /* Do Nothing */
|
|
<&clkc CLKID_VAPB_0>;
|
|
assigned-clock-rates = <0>, /* Do Nothing */
|
|
<666666666>,
|
|
<0>, /* Do Nothing */
|
|
<0>, /* Do Nothing */
|
|
<250000000>,
|
|
<0>; /* Do Nothing */
|
|
};
|
|
|
|
&saradc {
|
|
compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
|
|
clocks = <&xtal>,
|
|
<&clkc CLKID_SAR_ADC>,
|
|
<&clkc CLKID_SAR_ADC_CLK>,
|
|
<&clkc CLKID_SAR_ADC_SEL>;
|
|
clock-names = "clkin", "core", "adc_clk", "adc_sel";
|
|
};
|
|
|
|
&sd_emmc_a {
|
|
clocks = <&clkc CLKID_SD_EMMC_A>,
|
|
<&clkc CLKID_SD_EMMC_A_CLK0>,
|
|
<&clkc CLKID_FCLK_DIV2>;
|
|
clock-names = "core", "clkin0", "clkin1";
|
|
resets = <&reset RESET_SD_EMMC_A>;
|
|
};
|
|
|
|
&sd_emmc_b {
|
|
clocks = <&clkc CLKID_SD_EMMC_B>,
|
|
<&clkc CLKID_SD_EMMC_B_CLK0>,
|
|
<&clkc CLKID_FCLK_DIV2>;
|
|
clock-names = "core", "clkin0", "clkin1";
|
|
resets = <&reset RESET_SD_EMMC_B>;
|
|
};
|
|
|
|
&sd_emmc_c {
|
|
clocks = <&clkc CLKID_SD_EMMC_C>,
|
|
<&clkc CLKID_SD_EMMC_C_CLK0>,
|
|
<&clkc CLKID_FCLK_DIV2>;
|
|
clock-names = "core", "clkin0", "clkin1";
|
|
resets = <&reset RESET_SD_EMMC_C>;
|
|
};
|
|
|
|
&simplefb_hdmi {
|
|
clocks = <&clkc CLKID_HDMI_PCLK>,
|
|
<&clkc CLKID_CLK81>,
|
|
<&clkc CLKID_GCLK_VENCI_INT0>;
|
|
};
|
|
|
|
&spicc {
|
|
clocks = <&clkc CLKID_SPICC>;
|
|
clock-names = "core";
|
|
resets = <&reset RESET_PERIPHS_SPICC>;
|
|
num-cs = <1>;
|
|
};
|
|
|
|
&spifc {
|
|
clocks = <&clkc CLKID_SPI>;
|
|
};
|
|
|
|
&uart_A {
|
|
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
|
|
clock-names = "xtal", "pclk", "baud";
|
|
};
|
|
|
|
&uart_AO {
|
|
clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
|
|
clock-names = "xtal", "pclk", "baud";
|
|
};
|
|
|
|
&uart_AO_B {
|
|
clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
|
|
clock-names = "xtal", "pclk", "baud";
|
|
};
|
|
|
|
&uart_B {
|
|
clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
|
|
clock-names = "xtal", "pclk", "baud";
|
|
};
|
|
|
|
&uart_C {
|
|
clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
|
|
clock-names = "xtal", "pclk", "baud";
|
|
};
|
|
|
|
&vpu {
|
|
compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
|
|
power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
|
|
};
|
|
|
|
&vdec {
|
|
compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec";
|
|
clocks = <&clkc CLKID_DOS_PARSER>,
|
|
<&clkc CLKID_DOS>,
|
|
<&clkc CLKID_VDEC_1>,
|
|
<&clkc CLKID_VDEC_HEVC>;
|
|
clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
|
|
resets = <&reset RESET_PARSER>;
|
|
reset-names = "esparser";
|
|
};
|