u-boot/drivers/net/Makefile
Codrin Ciubotariu 6706b115a6 net/vsc9953: Add driver for Vitesse VSC9953 L2 Switch IP
This patch adds a driver for VSC9953 L2 Switch. This Vitesse IP
is integrated in Freescale T1040 and T1020 SoCs.
The L2 switch has 10 Ethernet ports: 2 internal fixed-links
(ports 8 and 9) at 2.5 Gbps and and 8 external ports at 1 Gbps.
The external ports may be connected to PHYs over QSGMII and SGMII.

Commands have also been added to enable/disable a port and to
check a port's link speed, duplexity and status. The commands are:

ethsw port <port_nr> enable|disable - enable/disable an l2 switch port
ethsw port <port_nr> show - show an l2 switch port's configuration

port_nr=0..9; use "all" for all ports

For more detailse please see doc/README.t1040-l2switch

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-01-16 09:32:38 -08:00

69 lines
2.6 KiB
Makefile

#
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
obj-$(CONFIG_ALTERA_TSE) += altera_tse.o
obj-$(CONFIG_ARMADA100_FEC) += armada100_fec.o
obj-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
obj-$(CONFIG_DRIVER_AX88180) += ax88180.o
obj-$(CONFIG_BCM_SF2_ETH) += bcm-sf2-eth.o
obj-$(CONFIG_BCM_SF2_ETH_GMAC) += bcm-sf2-eth-gmac.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_CALXEDA_XGMAC) += calxedaxgmac.o
obj-$(CONFIG_CS8900) += cs8900.o
obj-$(CONFIG_TULIP) += dc2114x.o
obj-$(CONFIG_DESIGNWARE_ETH) += designware.o
obj-$(CONFIG_DRIVER_DM9000) += dm9000x.o
obj-$(CONFIG_DNET) += dnet.o
obj-$(CONFIG_E1000) += e1000.o
obj-$(CONFIG_E1000_SPI) += e1000_spi.o
obj-$(CONFIG_EEPRO100) += eepro100.o
obj-$(CONFIG_SUNXI_EMAC) += sunxi_emac.o
obj-$(CONFIG_ENC28J60) += enc28j60.o
obj-$(CONFIG_EP93XX) += ep93xx_eth.o
obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_FEC_MXC) += fec_mxc.o
obj-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
obj-$(CONFIG_FTGMAC100) += ftgmac100.o
obj-$(CONFIG_FTMAC110) += ftmac110.o
obj-$(CONFIG_FTMAC100) += ftmac100.o
obj-$(CONFIG_GRETH) += greth.o
obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o
obj-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
obj-$(CONFIG_LAN91C96) += lan91c96.o
obj-$(CONFIG_MACB) += macb.o
obj-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
obj-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o
obj-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o
obj-$(CONFIG_MVGBE) += mvgbe.o
obj-$(CONFIG_MVNETA) += mvneta.o
obj-$(CONFIG_NATSEMI) += natsemi.o
obj-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o
obj-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o
obj-$(CONFIG_NETCONSOLE) += netconsole.o
obj-$(CONFIG_NS8382X) += ns8382x.o
obj-$(CONFIG_PCNET) += pcnet.o
obj-$(CONFIG_RTL8139) += rtl8139.o
obj-$(CONFIG_RTL8169) += rtl8169.o
obj-$(CONFIG_SH_ETHER) += sh_eth.o
obj-$(CONFIG_SMC91111) += smc91111.o
obj-$(CONFIG_SMC911X) += smc911x.o
obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o
obj-$(CONFIG_FMAN_ENET) += fsl_mdio.o
obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
obj-$(CONFIG_ULI526X) += uli526x.o
obj-$(CONFIG_VSC7385_ENET) += vsc7385.o
obj-$(CONFIG_XILINX_AXIEMAC) += xilinx_axi_emac.o
obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
obj-$(CONFIG_XILINX_LL_TEMAC) += xilinx_ll_temac.o xilinx_ll_temac_mdio.o \
xilinx_ll_temac_fifo.o xilinx_ll_temac_sdma.o
obj-$(CONFIG_ZYNQ_GEM) += zynq_gem.o
obj-$(CONFIG_FSL_MC_ENET) += fsl_mc/
obj-$(CONFIG_VSC9953) += vsc9953.o