mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
4efe52bf23
When enumerating devices, honour the pci_skip_dev() function. This can be used by PCI controller drivers to restrict which devices will be probed. This is required by the NVIDIA Tegra PCIe controller driver, which will fail with a data abort exception if an access is attempted to a device number larger than 0 outside of bus 0. pci_skip_dev() is therefore implemented to prevent any such accesses. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org>
499 lines
15 KiB
C
499 lines
15 KiB
C
/*
|
|
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Andreas Heppel <aheppel@sysgo.de>
|
|
*
|
|
* (C) Copyright 2002
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
* Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* PCI routines
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <bootretry.h>
|
|
#include <cli.h>
|
|
#include <command.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <pci.h>
|
|
|
|
/*
|
|
* Follows routines for the output of infos about devices on PCI bus.
|
|
*/
|
|
|
|
void pci_header_show(pci_dev_t dev);
|
|
void pci_header_show_brief(pci_dev_t dev);
|
|
|
|
/*
|
|
* Subroutine: pciinfo
|
|
*
|
|
* Description: Show information about devices on PCI bus.
|
|
* Depending on the define CONFIG_SYS_SHORT_PCI_LISTING
|
|
* the output will be more or less exhaustive.
|
|
*
|
|
* Inputs: bus_no the number of the bus to be scanned.
|
|
*
|
|
* Return: None
|
|
*
|
|
*/
|
|
void pciinfo(int BusNum, int ShortPCIListing)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_hose(BusNum);
|
|
int Device;
|
|
int Function;
|
|
unsigned char HeaderType;
|
|
unsigned short VendorID;
|
|
pci_dev_t dev;
|
|
|
|
if (!hose)
|
|
return;
|
|
|
|
printf("Scanning PCI devices on bus %d\n", BusNum);
|
|
|
|
if (ShortPCIListing) {
|
|
printf("BusDevFun VendorId DeviceId Device Class Sub-Class\n");
|
|
printf("_____________________________________________________________\n");
|
|
}
|
|
|
|
for (Device = 0; Device < PCI_MAX_PCI_DEVICES; Device++) {
|
|
HeaderType = 0;
|
|
VendorID = 0;
|
|
for (Function = 0; Function < PCI_MAX_PCI_FUNCTIONS; Function++) {
|
|
/*
|
|
* If this is not a multi-function device, we skip the rest.
|
|
*/
|
|
if (Function && !(HeaderType & 0x80))
|
|
break;
|
|
|
|
dev = PCI_BDF(BusNum, Device, Function);
|
|
|
|
if (pci_skip_dev(hose, dev))
|
|
continue;
|
|
|
|
pci_read_config_word(dev, PCI_VENDOR_ID, &VendorID);
|
|
if ((VendorID == 0xFFFF) || (VendorID == 0x0000))
|
|
continue;
|
|
|
|
if (!Function) pci_read_config_byte(dev, PCI_HEADER_TYPE, &HeaderType);
|
|
|
|
if (ShortPCIListing)
|
|
{
|
|
printf("%02x.%02x.%02x ", BusNum, Device, Function);
|
|
pci_header_show_brief(dev);
|
|
}
|
|
else
|
|
{
|
|
printf("\nFound PCI device %02x.%02x.%02x:\n",
|
|
BusNum, Device, Function);
|
|
pci_header_show(dev);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* Subroutine: pci_header_show_brief
|
|
*
|
|
* Description: Reads and prints the header of the
|
|
* specified PCI device in short form.
|
|
*
|
|
* Inputs: dev Bus+Device+Function number
|
|
*
|
|
* Return: None
|
|
*
|
|
*/
|
|
void pci_header_show_brief(pci_dev_t dev)
|
|
{
|
|
u16 vendor, device;
|
|
u8 class, subclass;
|
|
|
|
pci_read_config_word(dev, PCI_VENDOR_ID, &vendor);
|
|
pci_read_config_word(dev, PCI_DEVICE_ID, &device);
|
|
pci_read_config_byte(dev, PCI_CLASS_CODE, &class);
|
|
pci_read_config_byte(dev, PCI_CLASS_SUB_CODE, &subclass);
|
|
|
|
printf("0x%.4x 0x%.4x %-23s 0x%.2x\n",
|
|
vendor, device,
|
|
pci_class_str(class), subclass);
|
|
}
|
|
|
|
/*
|
|
* Subroutine: PCI_Header_Show
|
|
*
|
|
* Description: Reads the header of the specified PCI device.
|
|
*
|
|
* Inputs: BusDevFunc Bus+Device+Function number
|
|
*
|
|
* Return: None
|
|
*
|
|
*/
|
|
void pci_header_show(pci_dev_t dev)
|
|
{
|
|
u8 _byte, header_type;
|
|
u16 _word;
|
|
u32 _dword;
|
|
|
|
#define PRINT(msg, type, reg) \
|
|
pci_read_config_##type(dev, reg, &_##type); \
|
|
printf(msg, _##type)
|
|
|
|
#define PRINT2(msg, type, reg, func) \
|
|
pci_read_config_##type(dev, reg, &_##type); \
|
|
printf(msg, _##type, func(_##type))
|
|
|
|
pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
|
|
|
|
PRINT (" vendor ID = 0x%.4x\n", word, PCI_VENDOR_ID);
|
|
PRINT (" device ID = 0x%.4x\n", word, PCI_DEVICE_ID);
|
|
PRINT (" command register = 0x%.4x\n", word, PCI_COMMAND);
|
|
PRINT (" status register = 0x%.4x\n", word, PCI_STATUS);
|
|
PRINT (" revision ID = 0x%.2x\n", byte, PCI_REVISION_ID);
|
|
PRINT2(" class code = 0x%.2x (%s)\n", byte, PCI_CLASS_CODE,
|
|
pci_class_str);
|
|
PRINT (" sub class code = 0x%.2x\n", byte, PCI_CLASS_SUB_CODE);
|
|
PRINT (" programming interface = 0x%.2x\n", byte, PCI_CLASS_PROG);
|
|
PRINT (" cache line = 0x%.2x\n", byte, PCI_CACHE_LINE_SIZE);
|
|
PRINT (" latency time = 0x%.2x\n", byte, PCI_LATENCY_TIMER);
|
|
PRINT (" header type = 0x%.2x\n", byte, PCI_HEADER_TYPE);
|
|
PRINT (" BIST = 0x%.2x\n", byte, PCI_BIST);
|
|
PRINT (" base address 0 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_0);
|
|
|
|
switch (header_type & 0x03) {
|
|
case PCI_HEADER_TYPE_NORMAL: /* "normal" PCI device */
|
|
PRINT (" base address 1 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_1);
|
|
PRINT (" base address 2 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_2);
|
|
PRINT (" base address 3 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_3);
|
|
PRINT (" base address 4 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_4);
|
|
PRINT (" base address 5 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_5);
|
|
PRINT (" cardBus CIS pointer = 0x%.8x\n", dword, PCI_CARDBUS_CIS);
|
|
PRINT (" sub system vendor ID = 0x%.4x\n", word, PCI_SUBSYSTEM_VENDOR_ID);
|
|
PRINT (" sub system ID = 0x%.4x\n", word, PCI_SUBSYSTEM_ID);
|
|
PRINT (" expansion ROM base address = 0x%.8x\n", dword, PCI_ROM_ADDRESS);
|
|
PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE);
|
|
PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN);
|
|
PRINT (" min Grant = 0x%.2x\n", byte, PCI_MIN_GNT);
|
|
PRINT (" max Latency = 0x%.2x\n", byte, PCI_MAX_LAT);
|
|
break;
|
|
|
|
case PCI_HEADER_TYPE_BRIDGE: /* PCI-to-PCI bridge */
|
|
|
|
PRINT (" base address 1 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_1);
|
|
PRINT (" primary bus number = 0x%.2x\n", byte, PCI_PRIMARY_BUS);
|
|
PRINT (" secondary bus number = 0x%.2x\n", byte, PCI_SECONDARY_BUS);
|
|
PRINT (" subordinate bus number = 0x%.2x\n", byte, PCI_SUBORDINATE_BUS);
|
|
PRINT (" secondary latency timer = 0x%.2x\n", byte, PCI_SEC_LATENCY_TIMER);
|
|
PRINT (" IO base = 0x%.2x\n", byte, PCI_IO_BASE);
|
|
PRINT (" IO limit = 0x%.2x\n", byte, PCI_IO_LIMIT);
|
|
PRINT (" secondary status = 0x%.4x\n", word, PCI_SEC_STATUS);
|
|
PRINT (" memory base = 0x%.4x\n", word, PCI_MEMORY_BASE);
|
|
PRINT (" memory limit = 0x%.4x\n", word, PCI_MEMORY_LIMIT);
|
|
PRINT (" prefetch memory base = 0x%.4x\n", word, PCI_PREF_MEMORY_BASE);
|
|
PRINT (" prefetch memory limit = 0x%.4x\n", word, PCI_PREF_MEMORY_LIMIT);
|
|
PRINT (" prefetch memory base upper = 0x%.8x\n", dword, PCI_PREF_BASE_UPPER32);
|
|
PRINT (" prefetch memory limit upper = 0x%.8x\n", dword, PCI_PREF_LIMIT_UPPER32);
|
|
PRINT (" IO base upper 16 bits = 0x%.4x\n", word, PCI_IO_BASE_UPPER16);
|
|
PRINT (" IO limit upper 16 bits = 0x%.4x\n", word, PCI_IO_LIMIT_UPPER16);
|
|
PRINT (" expansion ROM base address = 0x%.8x\n", dword, PCI_ROM_ADDRESS1);
|
|
PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE);
|
|
PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN);
|
|
PRINT (" bridge control = 0x%.4x\n", word, PCI_BRIDGE_CONTROL);
|
|
break;
|
|
|
|
case PCI_HEADER_TYPE_CARDBUS: /* PCI-to-CardBus bridge */
|
|
|
|
PRINT (" capabilities = 0x%.2x\n", byte, PCI_CB_CAPABILITY_LIST);
|
|
PRINT (" secondary status = 0x%.4x\n", word, PCI_CB_SEC_STATUS);
|
|
PRINT (" primary bus number = 0x%.2x\n", byte, PCI_CB_PRIMARY_BUS);
|
|
PRINT (" CardBus number = 0x%.2x\n", byte, PCI_CB_CARD_BUS);
|
|
PRINT (" subordinate bus number = 0x%.2x\n", byte, PCI_CB_SUBORDINATE_BUS);
|
|
PRINT (" CardBus latency timer = 0x%.2x\n", byte, PCI_CB_LATENCY_TIMER);
|
|
PRINT (" CardBus memory base 0 = 0x%.8x\n", dword, PCI_CB_MEMORY_BASE_0);
|
|
PRINT (" CardBus memory limit 0 = 0x%.8x\n", dword, PCI_CB_MEMORY_LIMIT_0);
|
|
PRINT (" CardBus memory base 1 = 0x%.8x\n", dword, PCI_CB_MEMORY_BASE_1);
|
|
PRINT (" CardBus memory limit 1 = 0x%.8x\n", dword, PCI_CB_MEMORY_LIMIT_1);
|
|
PRINT (" CardBus IO base 0 = 0x%.4x\n", word, PCI_CB_IO_BASE_0);
|
|
PRINT (" CardBus IO base high 0 = 0x%.4x\n", word, PCI_CB_IO_BASE_0_HI);
|
|
PRINT (" CardBus IO limit 0 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_0);
|
|
PRINT (" CardBus IO limit high 0 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_0_HI);
|
|
PRINT (" CardBus IO base 1 = 0x%.4x\n", word, PCI_CB_IO_BASE_1);
|
|
PRINT (" CardBus IO base high 1 = 0x%.4x\n", word, PCI_CB_IO_BASE_1_HI);
|
|
PRINT (" CardBus IO limit 1 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_1);
|
|
PRINT (" CardBus IO limit high 1 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_1_HI);
|
|
PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE);
|
|
PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN);
|
|
PRINT (" bridge control = 0x%.4x\n", word, PCI_CB_BRIDGE_CONTROL);
|
|
PRINT (" subvendor ID = 0x%.4x\n", word, PCI_CB_SUBSYSTEM_VENDOR_ID);
|
|
PRINT (" subdevice ID = 0x%.4x\n", word, PCI_CB_SUBSYSTEM_ID);
|
|
PRINT (" PC Card 16bit base address = 0x%.8x\n", dword, PCI_CB_LEGACY_MODE_BASE);
|
|
break;
|
|
|
|
default:
|
|
printf("unknown header\n");
|
|
break;
|
|
}
|
|
|
|
#undef PRINT
|
|
#undef PRINT2
|
|
}
|
|
|
|
/* Convert the "bus.device.function" identifier into a number.
|
|
*/
|
|
static pci_dev_t get_pci_dev(char* name)
|
|
{
|
|
char cnum[12];
|
|
int len, i, iold, n;
|
|
int bdfs[3] = {0,0,0};
|
|
|
|
len = strlen(name);
|
|
if (len > 8)
|
|
return -1;
|
|
for (i = 0, iold = 0, n = 0; i < len; i++) {
|
|
if (name[i] == '.') {
|
|
memcpy(cnum, &name[iold], i - iold);
|
|
cnum[i - iold] = '\0';
|
|
bdfs[n++] = simple_strtoul(cnum, NULL, 16);
|
|
iold = i + 1;
|
|
}
|
|
}
|
|
strcpy(cnum, &name[iold]);
|
|
if (n == 0)
|
|
n = 1;
|
|
bdfs[n] = simple_strtoul(cnum, NULL, 16);
|
|
return PCI_BDF(bdfs[0], bdfs[1], bdfs[2]);
|
|
}
|
|
|
|
static int pci_cfg_display(pci_dev_t bdf, ulong addr, ulong size, ulong length)
|
|
{
|
|
#define DISP_LINE_LEN 16
|
|
ulong i, nbytes, linebytes;
|
|
int rc = 0;
|
|
|
|
if (length == 0)
|
|
length = 0x40 / size; /* Standard PCI configuration space */
|
|
|
|
/* Print the lines.
|
|
* once, and all accesses are with the specified bus width.
|
|
*/
|
|
nbytes = length * size;
|
|
do {
|
|
uint val4;
|
|
ushort val2;
|
|
u_char val1;
|
|
|
|
printf("%08lx:", addr);
|
|
linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes;
|
|
for (i=0; i<linebytes; i+= size) {
|
|
if (size == 4) {
|
|
pci_read_config_dword(bdf, addr, &val4);
|
|
printf(" %08x", val4);
|
|
} else if (size == 2) {
|
|
pci_read_config_word(bdf, addr, &val2);
|
|
printf(" %04x", val2);
|
|
} else {
|
|
pci_read_config_byte(bdf, addr, &val1);
|
|
printf(" %02x", val1);
|
|
}
|
|
addr += size;
|
|
}
|
|
printf("\n");
|
|
nbytes -= linebytes;
|
|
if (ctrlc()) {
|
|
rc = 1;
|
|
break;
|
|
}
|
|
} while (nbytes > 0);
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static int pci_cfg_write (pci_dev_t bdf, ulong addr, ulong size, ulong value)
|
|
{
|
|
if (size == 4) {
|
|
pci_write_config_dword(bdf, addr, value);
|
|
}
|
|
else if (size == 2) {
|
|
ushort val = value & 0xffff;
|
|
pci_write_config_word(bdf, addr, val);
|
|
}
|
|
else {
|
|
u_char val = value & 0xff;
|
|
pci_write_config_byte(bdf, addr, val);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
pci_cfg_modify (pci_dev_t bdf, ulong addr, ulong size, ulong value, int incrflag)
|
|
{
|
|
ulong i;
|
|
int nbytes;
|
|
uint val4;
|
|
ushort val2;
|
|
u_char val1;
|
|
|
|
/* Print the address, followed by value. Then accept input for
|
|
* the next value. A non-converted value exits.
|
|
*/
|
|
do {
|
|
printf("%08lx:", addr);
|
|
if (size == 4) {
|
|
pci_read_config_dword(bdf, addr, &val4);
|
|
printf(" %08x", val4);
|
|
}
|
|
else if (size == 2) {
|
|
pci_read_config_word(bdf, addr, &val2);
|
|
printf(" %04x", val2);
|
|
}
|
|
else {
|
|
pci_read_config_byte(bdf, addr, &val1);
|
|
printf(" %02x", val1);
|
|
}
|
|
|
|
nbytes = cli_readline(" ? ");
|
|
if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) {
|
|
/* <CR> pressed as only input, don't modify current
|
|
* location and move to next. "-" pressed will go back.
|
|
*/
|
|
if (incrflag)
|
|
addr += nbytes ? -size : size;
|
|
nbytes = 1;
|
|
/* good enough to not time out */
|
|
bootretry_reset_cmd_timeout();
|
|
}
|
|
#ifdef CONFIG_BOOT_RETRY_TIME
|
|
else if (nbytes == -2) {
|
|
break; /* timed out, exit the command */
|
|
}
|
|
#endif
|
|
else {
|
|
char *endp;
|
|
i = simple_strtoul(console_buffer, &endp, 16);
|
|
nbytes = endp - console_buffer;
|
|
if (nbytes) {
|
|
/* good enough to not time out
|
|
*/
|
|
bootretry_reset_cmd_timeout();
|
|
pci_cfg_write (bdf, addr, size, i);
|
|
if (incrflag)
|
|
addr += size;
|
|
}
|
|
}
|
|
} while (nbytes);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* PCI Configuration Space access commands
|
|
*
|
|
* Syntax:
|
|
* pci display[.b, .w, .l] bus.device.function} [addr] [len]
|
|
* pci next[.b, .w, .l] bus.device.function [addr]
|
|
* pci modify[.b, .w, .l] bus.device.function [addr]
|
|
* pci write[.b, .w, .l] bus.device.function addr value
|
|
*/
|
|
static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
ulong addr = 0, value = 0, size = 0;
|
|
pci_dev_t bdf = 0;
|
|
char cmd = 's';
|
|
|
|
if (argc > 1)
|
|
cmd = argv[1][0];
|
|
|
|
switch (cmd) {
|
|
case 'd': /* display */
|
|
case 'n': /* next */
|
|
case 'm': /* modify */
|
|
case 'w': /* write */
|
|
/* Check for a size specification. */
|
|
size = cmd_get_data_size(argv[1], 4);
|
|
if (argc > 3)
|
|
addr = simple_strtoul(argv[3], NULL, 16);
|
|
if (argc > 4)
|
|
value = simple_strtoul(argv[4], NULL, 16);
|
|
case 'h': /* header */
|
|
if (argc < 3)
|
|
goto usage;
|
|
if ((bdf = get_pci_dev(argv[2])) == -1)
|
|
return 1;
|
|
break;
|
|
#ifdef CONFIG_CMD_PCI_ENUM
|
|
case 'e':
|
|
break;
|
|
#endif
|
|
default: /* scan bus */
|
|
value = 1; /* short listing */
|
|
bdf = 0; /* bus number */
|
|
if (argc > 1) {
|
|
if (argv[argc-1][0] == 'l') {
|
|
value = 0;
|
|
argc--;
|
|
}
|
|
if (argc > 1)
|
|
bdf = simple_strtoul(argv[1], NULL, 16);
|
|
}
|
|
pciinfo(bdf, value);
|
|
return 0;
|
|
}
|
|
|
|
switch (argv[1][0]) {
|
|
case 'h': /* header */
|
|
pci_header_show(bdf);
|
|
return 0;
|
|
case 'd': /* display */
|
|
return pci_cfg_display(bdf, addr, size, value);
|
|
#ifdef CONFIG_CMD_PCI_ENUM
|
|
case 'e':
|
|
pci_init();
|
|
return 0;
|
|
#endif
|
|
case 'n': /* next */
|
|
if (argc < 4)
|
|
goto usage;
|
|
return pci_cfg_modify(bdf, addr, size, value, 0);
|
|
case 'm': /* modify */
|
|
if (argc < 4)
|
|
goto usage;
|
|
return pci_cfg_modify(bdf, addr, size, value, 1);
|
|
case 'w': /* write */
|
|
if (argc < 5)
|
|
goto usage;
|
|
return pci_cfg_write(bdf, addr, size, value);
|
|
}
|
|
|
|
return 1;
|
|
usage:
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
/***************************************************/
|
|
|
|
#ifdef CONFIG_SYS_LONGHELP
|
|
static char pci_help_text[] =
|
|
"[bus] [long]\n"
|
|
" - short or long list of PCI devices on bus 'bus'\n"
|
|
#ifdef CONFIG_CMD_PCI_ENUM
|
|
"pci enum\n"
|
|
" - re-enumerate PCI buses\n"
|
|
#endif
|
|
"pci header b.d.f\n"
|
|
" - show header of PCI device 'bus.device.function'\n"
|
|
"pci display[.b, .w, .l] b.d.f [address] [# of objects]\n"
|
|
" - display PCI configuration space (CFG)\n"
|
|
"pci next[.b, .w, .l] b.d.f address\n"
|
|
" - modify, read and keep CFG address\n"
|
|
"pci modify[.b, .w, .l] b.d.f address\n"
|
|
" - modify, auto increment CFG address\n"
|
|
"pci write[.b, .w, .l] b.d.f address value\n"
|
|
" - write to CFG address";
|
|
#endif
|
|
|
|
U_BOOT_CMD(
|
|
pci, 5, 1, do_pci,
|
|
"list and access PCI Configuration Space", pci_help_text
|
|
);
|