mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 03:08:31 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
165 lines
3.4 KiB
ArmAsm
165 lines
3.4 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* On-chip UART initializaion for low-level debugging
|
|
*
|
|
* Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*/
|
|
|
|
#include <linux/serial_reg.h>
|
|
#include <linux/linkage.h>
|
|
|
|
#include "../bcu/bcu-regs.h"
|
|
#include "../sc-regs.h"
|
|
#include "../sg-regs.h"
|
|
|
|
#if !defined(CONFIG_DEBUG_SEMIHOSTING)
|
|
#include CONFIG_DEBUG_LL_INCLUDE
|
|
#endif
|
|
|
|
#define BAUDRATE 115200
|
|
#define DIV_ROUND(x, d) (((x) + ((d) / 2)) / (d))
|
|
|
|
ENTRY(debug_ll_init)
|
|
ldr r0, =SG_REVISION
|
|
ldr r1, [r0]
|
|
and r1, r1, #SG_REVISION_TYPE_MASK
|
|
mov r1, r1, lsr #SG_REVISION_TYPE_SHIFT
|
|
|
|
#if defined(CONFIG_ARCH_UNIPHIER_LD4)
|
|
#define UNIPHIER_LD4_UART_CLK 36864000
|
|
cmp r1, #0x26
|
|
bne ld4_end
|
|
|
|
ldr r0, =SG_IECTRL
|
|
ldr r1, [r0]
|
|
orr r1, r1, #1
|
|
str r1, [r0]
|
|
|
|
sg_set_pinsel 88, 1, 8, 4, r0, r1 @ HSDOUT6 -> TXD0
|
|
|
|
ldr r3, =DIV_ROUND(UNIPHIER_LD4_UART_CLK, 16 * BAUDRATE)
|
|
|
|
b init_uart
|
|
ld4_end:
|
|
#endif
|
|
#if defined(CONFIG_ARCH_UNIPHIER_PRO4)
|
|
#define UNIPHIER_PRO4_UART_CLK 73728000
|
|
cmp r1, #0x28
|
|
bne pro4_end
|
|
|
|
sg_set_pinsel 128, 0, 4, 8, r0, r1 @ TXD0 -> TXD0
|
|
|
|
ldr r0, =SG_LOADPINCTRL
|
|
mov r1, #1
|
|
str r1, [r0]
|
|
|
|
ldr r0, =SC_CLKCTRL
|
|
ldr r1, [r0]
|
|
orr r1, r1, #SC_CLKCTRL_CEN_PERI
|
|
str r1, [r0]
|
|
|
|
ldr r3, =DIV_ROUND(UNIPHIER_PRO4_UART_CLK, 16 * BAUDRATE)
|
|
|
|
b init_uart
|
|
pro4_end:
|
|
#endif
|
|
#if defined(CONFIG_ARCH_UNIPHIER_SLD8)
|
|
#define UNIPHIER_SLD8_UART_CLK 80000000
|
|
cmp r1, #0x29
|
|
bne sld8_end
|
|
|
|
ldr r0, =SG_IECTRL
|
|
ldr r1, [r0]
|
|
orr r1, r1, #1
|
|
str r1, [r0]
|
|
|
|
sg_set_pinsel 70, 3, 8, 4, r0, r1 @ HSDOUT0 -> TXD0
|
|
|
|
ldr r3, =DIV_ROUND(UNIPHIER_SLD8_UART_CLK, 16 * BAUDRATE)
|
|
|
|
b init_uart
|
|
sld8_end:
|
|
#endif
|
|
#if defined(CONFIG_ARCH_UNIPHIER_PRO5)
|
|
#define UNIPHIER_PRO5_UART_CLK 73728000
|
|
cmp r1, #0x2A
|
|
bne pro5_end
|
|
|
|
sg_set_pinsel 47, 0, 4, 8, r0, r1 @ TXD0 -> TXD0
|
|
sg_set_pinsel 49, 0, 4, 8, r0, r1 @ TXD1 -> TXD1
|
|
sg_set_pinsel 51, 0, 4, 8, r0, r1 @ TXD2 -> TXD2
|
|
sg_set_pinsel 53, 0, 4, 8, r0, r1 @ TXD3 -> TXD3
|
|
|
|
ldr r0, =SG_LOADPINCTRL
|
|
mov r1, #1
|
|
str r1, [r0]
|
|
|
|
ldr r0, =SC_CLKCTRL
|
|
ldr r1, [r0]
|
|
orr r1, r1, #SC_CLKCTRL_CEN_PERI
|
|
str r1, [r0]
|
|
|
|
ldr r3, =DIV_ROUND(UNIPHIER_PRO5_UART_CLK, 16 * BAUDRATE)
|
|
|
|
b init_uart
|
|
pro5_end:
|
|
#endif
|
|
#if defined(CONFIG_ARCH_UNIPHIER_PXS2)
|
|
#define UNIPHIER_PXS2_UART_CLK 88900000
|
|
cmp r1, #0x2E
|
|
bne pxs2_end
|
|
|
|
ldr r0, =SG_IECTRL
|
|
ldr r1, [r0]
|
|
orr r1, r1, #1
|
|
str r1, [r0]
|
|
|
|
sg_set_pinsel 217, 8, 8, 4, r0, r1 @ TXD0 -> TXD0
|
|
sg_set_pinsel 115, 8, 8, 4, r0, r1 @ TXD1 -> TXD1
|
|
sg_set_pinsel 113, 8, 8, 4, r0, r1 @ TXD2 -> TXD2
|
|
sg_set_pinsel 219, 8, 8, 4, r0, r1 @ TXD3 -> TXD3
|
|
|
|
ldr r0, =SC_CLKCTRL
|
|
ldr r1, [r0]
|
|
orr r1, r1, #SC_CLKCTRL_CEN_PERI
|
|
str r1, [r0]
|
|
|
|
ldr r3, =DIV_ROUND(UNIPHIER_PXS2_UART_CLK, 16 * BAUDRATE)
|
|
|
|
b init_uart
|
|
pxs2_end:
|
|
#endif
|
|
#if defined(CONFIG_ARCH_UNIPHIER_LD6B)
|
|
#define UNIPHIER_LD6B_UART_CLK 88900000
|
|
cmp r1, #0x2F
|
|
bne ld6b_end
|
|
|
|
ldr r0, =SG_IECTRL
|
|
ldr r1, [r0]
|
|
orr r1, r1, #1
|
|
str r1, [r0]
|
|
|
|
sg_set_pinsel 135, 3, 8, 4, r0, r1 @ PORT10 -> TXD0
|
|
sg_set_pinsel 115, 0, 8, 4, r0, r1 @ TXD1 -> TXD1
|
|
sg_set_pinsel 113, 2, 8, 4, r0, r1 @ SBO0 -> TXD2
|
|
|
|
ldr r0, =SC_CLKCTRL
|
|
ldr r1, [r0]
|
|
orr r1, r1, #SC_CLKCTRL_CEN_PERI
|
|
str r1, [r0]
|
|
|
|
ldr r3, =DIV_ROUND(UNIPHIER_LD6B_UART_CLK, 16 * BAUDRATE)
|
|
|
|
b init_uart
|
|
ld6b_end:
|
|
#endif
|
|
mov pc, lr
|
|
|
|
init_uart:
|
|
addruart r0, r1, r2
|
|
mov r1, #UART_LCR_WLEN8 << 8
|
|
str r1, [r0, #0x10]
|
|
str r3, [r0, #0x24]
|
|
|
|
mov pc, lr
|
|
ENDPROC(debug_ll_init)
|