mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
87cb6862b9
Use lowlevel_init() instead of platformsetup() [rename]. Patch by Peter Pearse, 06 Oct 2005
396 lines
11 KiB
ArmAsm
396 lines
11 KiB
ArmAsm
/*
|
|
* Board specific setup info
|
|
*
|
|
* (C) Copyright 2003
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* -- Some bits of code used from rrload's head_OMAP1510.s --
|
|
* Copyright (C) 2002 RidgeRun, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
|
|
#if defined(CONFIG_OMAP1510)
|
|
#include <./configs/omap1510.h>
|
|
#endif
|
|
|
|
#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK))
|
|
|
|
|
|
_TEXT_BASE:
|
|
.word TEXT_BASE /* sdram load addr from config.mk */
|
|
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
|
|
/*
|
|
* Configure 1510 pins functions to match our board.
|
|
*/
|
|
ldr r0, REG_PULL_DWN_CTRL_0
|
|
ldr r1, VAL_PULL_DWN_CTRL_0
|
|
str r1, [r0]
|
|
ldr r0, REG_PULL_DWN_CTRL_1
|
|
ldr r1, VAL_PULL_DWN_CTRL_1
|
|
str r1, [r0]
|
|
ldr r0, REG_PULL_DWN_CTRL_2
|
|
ldr r1, VAL_PULL_DWN_CTRL_2
|
|
str r1, [r0]
|
|
ldr r0, REG_PULL_DWN_CTRL_3
|
|
ldr r1, VAL_PULL_DWN_CTRL_3
|
|
str r1, [r0]
|
|
ldr r0, REG_FUNC_MUX_CTRL_4
|
|
ldr r1, VAL_FUNC_MUX_CTRL_4
|
|
str r1, [r0]
|
|
ldr r0, REG_FUNC_MUX_CTRL_5
|
|
ldr r1, VAL_FUNC_MUX_CTRL_5
|
|
str r1, [r0]
|
|
ldr r0, REG_FUNC_MUX_CTRL_6
|
|
ldr r1, VAL_FUNC_MUX_CTRL_6
|
|
str r1, [r0]
|
|
ldr r0, REG_FUNC_MUX_CTRL_7
|
|
ldr r1, VAL_FUNC_MUX_CTRL_7
|
|
str r1, [r0]
|
|
ldr r0, REG_FUNC_MUX_CTRL_8
|
|
ldr r1, VAL_FUNC_MUX_CTRL_8
|
|
str r1, [r0]
|
|
ldr r0, REG_FUNC_MUX_CTRL_9
|
|
ldr r1, VAL_FUNC_MUX_CTRL_9
|
|
str r1, [r0]
|
|
ldr r0, REG_FUNC_MUX_CTRL_A
|
|
ldr r1, VAL_FUNC_MUX_CTRL_A
|
|
str r1, [r0]
|
|
ldr r0, REG_FUNC_MUX_CTRL_B
|
|
ldr r1, VAL_FUNC_MUX_CTRL_B
|
|
str r1, [r0]
|
|
ldr r0, REG_FUNC_MUX_CTRL_C
|
|
ldr r1, VAL_FUNC_MUX_CTRL_C
|
|
str r1, [r0]
|
|
ldr r0, REG_FUNC_MUX_CTRL_D
|
|
ldr r1, VAL_FUNC_MUX_CTRL_D
|
|
str r1, [r0]
|
|
ldr r0, REG_VOLTAGE_CTRL_0
|
|
ldr r1, VAL_VOLTAGE_CTRL_0
|
|
str r1, [r0]
|
|
ldr r0, REG_TEST_DBG_CTRL_0
|
|
ldr r1, VAL_TEST_DBG_CTRL_0
|
|
str r1, [r0]
|
|
ldr r0, REG_MOD_CONF_CTRL_0
|
|
ldr r1, VAL_MOD_CONF_CTRL_0
|
|
str r1, [r0]
|
|
|
|
/* Move to 1510 mode */
|
|
ldr r0, REG_COMP_MODE_CTRL_0
|
|
ldr r1, VAL_COMP_MODE_CTRL_0
|
|
str r1, [r0]
|
|
|
|
/* Set up Traffic Ctlr*/
|
|
ldr r0, REG_TC_IMIF_PRIO
|
|
mov r1, #0x0
|
|
str r1, [r0]
|
|
ldr r0, REG_TC_EMIFS_PRIO
|
|
str r1, [r0]
|
|
ldr r0, REG_TC_EMIFF_PRIO
|
|
str r1, [r0]
|
|
|
|
ldr r0, REG_TC_EMIFS_CONFIG
|
|
ldr r1, [r0]
|
|
bic r1, r1, #0x08 /* clear the global power-down enable PDE bit */
|
|
bic r1, r1, #0x01 /* write protect flash by clearing the WP bit */
|
|
str r1, [r0] /* EMIFS GlB Configuration. (value 0x12 most likely) */
|
|
|
|
/* Setup some clock domains */
|
|
ldr r1, =OMAP1510_CLKS
|
|
ldr r0, REG_ARM_IDLECT2
|
|
strh r1, [r0] /* CLKM, Clock domain control. */
|
|
|
|
mov r1, #0x01 /* PER_EN bit */
|
|
ldr r0, REG_ARM_RSTCT2
|
|
strh r1, [r0] /* CLKM; Peripheral reset. */
|
|
|
|
/* Set CLKM to Sync-Scalable */
|
|
/* I supposidly need to enable the dsp clock before switching */
|
|
mov r1, #0x1000
|
|
ldr r0, REG_ARM_SYSST
|
|
strh r1, [r0]
|
|
mov r0, #0x400
|
|
1:
|
|
subs r0, r0, #0x1 /* wait for any bubbles to finish */
|
|
bne 1b
|
|
|
|
ldr r1, VAL_ARM_CKCTL /* use 12Mhz ref, PER must be <= 50Mhz so /2 */
|
|
ldr r0, REG_ARM_CKCTL
|
|
strh r1, [r0]
|
|
|
|
/* setup DPLL 1 */
|
|
ldr r1, VAL_DPLL1_CTL
|
|
ldr r0, REG_DPLL1_CTL
|
|
strh r1, [r0]
|
|
ands r1, r1, #0x10 /* Check if PLL is enabled. */
|
|
beq lock_end /* Do not look for lock if BYPASS selected */
|
|
2:
|
|
ldrh r1, [r0]
|
|
ands r1, r1, #0x01 /* Check the LOCK bit. */
|
|
beq 2b /* ...loop until bit goes hi. */
|
|
lock_end:
|
|
|
|
/* Set memory timings corresponding to the new clock speed */
|
|
|
|
/* Check execution location to determine current execution location
|
|
* and branch to appropriate initialization code.
|
|
*/
|
|
mov r0, #0x10000000 /* Load physical SDRAM base. */
|
|
mov r1, pc /* Get current execution location. */
|
|
/* Zero all but top 6 bits of PC, as they alone detect whether an
|
|
* address is in the range 0x1000:0000-0x13ff:ffff, the 64M sized
|
|
* valid range for SDRAM on the OMAP 1510/5910.
|
|
*/
|
|
and r1, r1, #0xfc000000
|
|
cmp r1, r0 /* Compare. */
|
|
beq skip_sdram /* Skip over EMIF-fast initialization
|
|
* if running from SDRAM.
|
|
*/
|
|
|
|
/*
|
|
* Delay for SDRAM initialization.
|
|
*/
|
|
mov r3, #0x1800 /* value should be checked */
|
|
3:
|
|
subs r3, r3, #0x1 /* Decrement count */
|
|
bne 3b
|
|
|
|
/*
|
|
* Set SDRAM control values. Disable refresh before MRS command.
|
|
*/
|
|
ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG /* get good value */
|
|
bic r3, r0, #0xC /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */
|
|
orr r3, r3, #0x8000000 /* (BIT27) Disable CLK when Power down or Self-Refresh */
|
|
orr r3, r3, #0x4000000 /* BIT26 Power Down Enable */
|
|
ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */
|
|
str r3, [r2] /* Store the passed value with AR disabled. */
|
|
|
|
ldr r1, VAL_TC_EMIFF_MRS /* get MRS value */
|
|
ldr r2, REG_TC_EMIFF_MRS /* Point to MRS register. */
|
|
str r1, [r2] /* Store the passed value.*/
|
|
|
|
ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */
|
|
str r0, [r2] /* Store the passed value. */
|
|
|
|
/*
|
|
* Delay for SDRAM initialization.
|
|
*/
|
|
mov r3, #0x1800
|
|
4:
|
|
subs r3, r3, #1 /* Decrement count. */
|
|
bne 4b
|
|
|
|
skip_sdram:
|
|
|
|
/* slow interface */
|
|
ldr r1, VAL_TC_EMIFS_CS0_CONFIG
|
|
ldr r0, REG_TC_EMIFS_CS0_CONFIG
|
|
str r1, [r0] /* Chip Select 0 */
|
|
ldr r1, VAL_TC_EMIFS_CS1_CONFIG
|
|
ldr r0, REG_TC_EMIFS_CS1_CONFIG
|
|
str r1, [r0] /* Chip Select 1 */
|
|
ldr r1, VAL_TC_EMIFS_CS2_CONFIG
|
|
ldr r0, REG_TC_EMIFS_CS2_CONFIG
|
|
str r1, [r0] /* Chip Select 2 */
|
|
ldr r1, VAL_TC_EMIFS_CS3_CONFIG
|
|
ldr r0, REG_TC_EMIFS_CS3_CONFIG
|
|
str r1, [r0] /* Chip Select 3 */
|
|
|
|
/* Next, Enable the RS232 Line Drivers in the FPGA. */
|
|
/* Also, power on the audio CODEC's amplifier here, */
|
|
/* which will make a noise on the audio output. */
|
|
/* This is done here instead of in the kernel so there */
|
|
/* isn't a loud popping noise at the start of each */
|
|
/* song. */
|
|
/* Also, disable the CODEC's clocks. */
|
|
/* omap1510-HelenP1 [specific] */
|
|
|
|
ldr r0, REG_FPGA_POWER
|
|
mov r1, #0
|
|
ldr r2, REG_FPGA_DIP_SWITCH
|
|
ldrb r3, [r2]
|
|
cmp r3, #0x8
|
|
movne r1, #0x62 /* Enable the RS232 Line Drivers in the EPLD */
|
|
strb r1, [r0]
|
|
ldr r0, REG_FPGA_AUDIO
|
|
mov r1, #0x0 /* Disable sound driver (CODEC clocks) */
|
|
strb r1, [r0]
|
|
|
|
/* back to arch calling code */
|
|
mov pc, lr
|
|
|
|
/* the literal pools origin */
|
|
.ltorg
|
|
|
|
/* OMAP configuration registers */
|
|
REG_FUNC_MUX_CTRL_0: /* 32 bits */
|
|
.word 0xfffe1000
|
|
REG_FUNC_MUX_CTRL_1: /* 32 bits */
|
|
.word 0xfffe1004
|
|
REG_FUNC_MUX_CTRL_2: /* 32 bits */
|
|
.word 0xfffe1008
|
|
REG_COMP_MODE_CTRL_0: /* 32 bits */
|
|
.word 0xfffe100c
|
|
REG_FUNC_MUX_CTRL_3: /* 32 bits */
|
|
.word 0xfffe1010
|
|
REG_FUNC_MUX_CTRL_4: /* 32 bits */
|
|
.word 0xfffe1014
|
|
REG_FUNC_MUX_CTRL_5: /* 32 bits */
|
|
.word 0xfffe1018
|
|
REG_FUNC_MUX_CTRL_6: /* 32 bits */
|
|
.word 0xfffe101c
|
|
REG_FUNC_MUX_CTRL_7: /* 32 bits */
|
|
.word 0xfffe1020
|
|
REG_FUNC_MUX_CTRL_8: /* 32 bits */
|
|
.word 0xfffe1024
|
|
REG_FUNC_MUX_CTRL_9: /* 32 bits */
|
|
.word 0xfffe1028
|
|
REG_FUNC_MUX_CTRL_A: /* 32 bits */
|
|
.word 0xfffe102C
|
|
REG_FUNC_MUX_CTRL_B: /* 32 bits */
|
|
.word 0xfffe1030
|
|
REG_FUNC_MUX_CTRL_C: /* 32 bits */
|
|
.word 0xfffe1034
|
|
REG_FUNC_MUX_CTRL_D: /* 32 bits */
|
|
.word 0xfffe1038
|
|
REG_PULL_DWN_CTRL_0: /* 32 bits */
|
|
.word 0xfffe1040
|
|
REG_PULL_DWN_CTRL_1: /* 32 bits */
|
|
.word 0xfffe1044
|
|
REG_PULL_DWN_CTRL_2: /* 32 bits */
|
|
.word 0xfffe1048
|
|
REG_PULL_DWN_CTRL_3: /* 32 bits */
|
|
.word 0xfffe104c
|
|
REG_VOLTAGE_CTRL_0: /* 32 bits */
|
|
.word 0xfffe1060
|
|
REG_TEST_DBG_CTRL_0: /* 32 bits */
|
|
.word 0xfffe1070
|
|
REG_MOD_CONF_CTRL_0: /* 32 bits */
|
|
.word 0xfffe1080
|
|
REG_TC_IMIF_PRIO: /* 32 bits */
|
|
.word 0xfffecc00
|
|
REG_TC_EMIFS_PRIO: /* 32 bits */
|
|
.word 0xfffecc04
|
|
REG_TC_EMIFF_PRIO: /* 32 bits */
|
|
.word 0xfffecc08
|
|
REG_TC_EMIFS_CONFIG: /* 32 bits */
|
|
.word 0xfffecc0c
|
|
REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */
|
|
.word 0xfffecc10
|
|
REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */
|
|
.word 0xfffecc14
|
|
REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */
|
|
.word 0xfffecc18
|
|
REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */
|
|
.word 0xfffecc1c
|
|
REG_TC_EMIFF_SDRAM_CONFIG: /* 32 bits */
|
|
.word 0xfffecc20
|
|
REG_TC_EMIFF_MRS: /* 32 bits */
|
|
.word 0xfffecc24
|
|
/* MPU clock/reset/power mode control registers */
|
|
REG_ARM_CKCTL: /* 16 bits */
|
|
.word 0xfffece00
|
|
REG_ARM_IDLECT2: /* 16 bits */
|
|
.word 0xfffece08
|
|
REG_ARM_RSTCT2: /* 16 bits */
|
|
.word 0xfffece14
|
|
REG_ARM_SYSST: /* 16 bits */
|
|
.word 0xfffece18
|
|
/* DPLL control registers */
|
|
REG_DPLL1_CTL: /* 16 bits */
|
|
.word 0xfffecf00
|
|
/* identification code register */
|
|
REG_IDCODE: /* 32 bits */
|
|
.word 0xfffed404
|
|
|
|
/* Innovator specific */
|
|
REG_FPGA_LED_DIGIT: /* 8 bits (not used on Innovator) */
|
|
.word 0x08000003
|
|
REG_FPGA_POWER: /* 8 bits */
|
|
.word 0x08000005
|
|
REG_FPGA_AUDIO: /* 8 bits (not used on Innovator) */
|
|
.word 0x0800000c
|
|
REG_FPGA_DIP_SWITCH: /* 8 bits (not used on Innovator) */
|
|
.word 0x0800000e
|
|
|
|
VAL_COMP_MODE_CTRL_0:
|
|
.word 0x0000eaef
|
|
VAL_FUNC_MUX_CTRL_4:
|
|
.word 0x00000000
|
|
VAL_FUNC_MUX_CTRL_5:
|
|
.word 0x00000000
|
|
VAL_FUNC_MUX_CTRL_6:
|
|
.word 0x00000001
|
|
VAL_FUNC_MUX_CTRL_7:
|
|
.word 0x00000000
|
|
VAL_FUNC_MUX_CTRL_8:
|
|
.word 0x10001200
|
|
VAL_FUNC_MUX_CTRL_9:
|
|
.word 0x01201012
|
|
VAL_FUNC_MUX_CTRL_A:
|
|
.word 0x00000248
|
|
VAL_FUNC_MUX_CTRL_B:
|
|
.word 0x00000248
|
|
VAL_FUNC_MUX_CTRL_C:
|
|
.word 0x09000000
|
|
VAL_FUNC_MUX_CTRL_D:
|
|
.word 0x00000000
|
|
VAL_PULL_DWN_CTRL_0:
|
|
.word 0x11a10000
|
|
VAL_PULL_DWN_CTRL_1:
|
|
.word 0x2e047fff
|
|
VAL_PULL_DWN_CTRL_2:
|
|
.word 0xffd603a6
|
|
VAL_PULL_DWN_CTRL_3:
|
|
.word 0x00003e03
|
|
VAL_VOLTAGE_CTRL_0:
|
|
.word 0x00000007
|
|
VAL_TEST_DBG_CTRL_0:
|
|
/* See Errata 4.13, This works around a SRAM bug, for chips below ES2.5 .
|
|
* This slows down internal SRAM accesses.
|
|
*/
|
|
.word 0x00000007
|
|
VAL_MOD_CONF_CTRL_0:
|
|
.word 0x0b000008
|
|
VAL_ARM_CKCTL:
|
|
.word 0x010f
|
|
VAL_DPLL1_CTL:
|
|
.word 0x2710
|
|
VAL_TC_EMIFS_CS1_CONFIG_PRELIM:
|
|
.word 0x00001149
|
|
VAL_TC_EMIFS_CS2_CONFIG_PRELIM:
|
|
.word 0x00004158
|
|
VAL_TC_EMIFS_CS0_CONFIG:
|
|
.word 0x002130b0
|
|
VAL_TC_EMIFS_CS1_CONFIG:
|
|
.word 0x0000f559
|
|
VAL_TC_EMIFS_CS2_CONFIG:
|
|
.word 0x000055f0
|
|
VAL_TC_EMIFS_CS3_CONFIG:
|
|
.word 0x00003331
|
|
VAL_TC_EMIFF_SDRAM_CONFIG:
|
|
.word 0x010290fc
|
|
VAL_TC_EMIFF_MRS:
|
|
.word 0x00000027
|