mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
445 lines
11 KiB
C
445 lines
11 KiB
C
/*
|
|
* (C) Copyright 2001
|
|
* Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* evb64260.c - main board support/init for the Galileo Eval board.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <74xx_7xx.h>
|
|
#include <galileo/memory.h>
|
|
#include <galileo/pci.h>
|
|
#include <galileo/gt64260R.h>
|
|
#include <net.h>
|
|
|
|
#include <asm/io.h>
|
|
#include "eth.h"
|
|
#include "mpsc.h"
|
|
#include "i2c.h"
|
|
#include "64260.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifdef CONFIG_ZUMA_V2
|
|
extern void zuma_mbox_init(void);
|
|
#endif
|
|
|
|
#undef DEBUG
|
|
#define MAP_PCI
|
|
|
|
#ifdef DEBUG
|
|
#define DP(x) x
|
|
#else
|
|
#define DP(x)
|
|
#endif
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* this is the current GT register space location */
|
|
/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
|
|
|
|
/* Unfortunately, we cant change it while we are in flash, so we initialize it
|
|
* to the "final" value. This means that any debug_led calls before
|
|
* board_early_init_f wont work right (like in cpu_init_f).
|
|
* See also my_remap_gt_regs below. (NTL)
|
|
*/
|
|
|
|
unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* This is a version of the GT register space remapping function that
|
|
* doesn't touch globals (meaning, it's ok to run from flash.)
|
|
*
|
|
* Unfortunately, this has the side effect that a writable
|
|
* INTERNAL_REG_BASE_ADDR is impossible. Oh well.
|
|
*/
|
|
|
|
void
|
|
my_remap_gt_regs(u32 cur_loc, u32 new_loc)
|
|
{
|
|
u32 temp;
|
|
|
|
/* check and see if it's already moved */
|
|
temp = in_le32((u32 *)(new_loc + INTERNAL_SPACE_DECODE));
|
|
if ((temp & 0xffff) == new_loc >> 20)
|
|
return;
|
|
|
|
temp = (in_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE)) &
|
|
0xffff0000) | (new_loc >> 20);
|
|
|
|
out_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE), temp);
|
|
|
|
while (GTREGREAD(INTERNAL_SPACE_DECODE) != temp);
|
|
}
|
|
|
|
static void
|
|
gt_pci_config(void)
|
|
{
|
|
/* move PCI stuff out of the way - NTL */
|
|
/* map PCI Host 0 */
|
|
pciMapSpace(PCI_HOST0, PCI_REGION0, CFG_PCI0_0_MEM_SPACE,
|
|
CFG_PCI0_0_MEM_SPACE, CFG_PCI0_MEM_SIZE);
|
|
|
|
pciMapSpace(PCI_HOST0, PCI_REGION1, 0, 0, 0);
|
|
pciMapSpace(PCI_HOST0, PCI_REGION2, 0, 0, 0);
|
|
pciMapSpace(PCI_HOST0, PCI_REGION3, 0, 0, 0);
|
|
|
|
pciMapSpace(PCI_HOST0, PCI_IO, CFG_PCI0_IO_SPACE_PCI,
|
|
CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE);
|
|
|
|
/* map PCI Host 1 */
|
|
pciMapSpace(PCI_HOST1, PCI_REGION0, CFG_PCI1_0_MEM_SPACE,
|
|
CFG_PCI1_0_MEM_SPACE, CFG_PCI1_MEM_SIZE);
|
|
|
|
pciMapSpace(PCI_HOST1, PCI_REGION1, 0, 0, 0);
|
|
pciMapSpace(PCI_HOST1, PCI_REGION2, 0, 0, 0);
|
|
pciMapSpace(PCI_HOST1, PCI_REGION3, 0, 0, 0);
|
|
|
|
pciMapSpace(PCI_HOST1, PCI_IO, CFG_PCI1_IO_SPACE_PCI,
|
|
CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE);
|
|
|
|
/* PCI interface settings */
|
|
GT_REG_WRITE(PCI_0TIMEOUT_RETRY, 0xffff);
|
|
GT_REG_WRITE(PCI_1TIMEOUT_RETRY, 0xffff);
|
|
GT_REG_WRITE(PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffff80e);
|
|
GT_REG_WRITE(PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffff80e);
|
|
|
|
|
|
}
|
|
|
|
/* Setup CPU interface paramaters */
|
|
static void
|
|
gt_cpu_config(void)
|
|
{
|
|
cpu_t cpu = get_cpu_type();
|
|
ulong tmp;
|
|
|
|
/* cpu configuration register */
|
|
tmp = GTREGREAD(CPU_CONFIGURATION);
|
|
|
|
/* set the AACK delay bit
|
|
* see Res#14 */
|
|
tmp |= CPU_CONF_AACK_DELAY;
|
|
tmp &= ~CPU_CONF_AACK_DELAY_2; /* New RGF */
|
|
|
|
/* Galileo claims this is necessary for all busses >= 100 MHz */
|
|
tmp |= CPU_CONF_FAST_CLK;
|
|
|
|
if (cpu == CPU_750CX) {
|
|
tmp &= ~CPU_CONF_DP_VALID; /* Safer, needed for CXe. RGF */
|
|
tmp &= ~CPU_CONF_AP_VALID;
|
|
} else {
|
|
tmp |= CPU_CONF_DP_VALID;
|
|
tmp |= CPU_CONF_AP_VALID;
|
|
}
|
|
|
|
/* this only works with the MPX bus */
|
|
tmp &= ~CPU_CONF_RD_OOO; /* Safer RGF */
|
|
tmp |= CPU_CONF_PIPELINE;
|
|
tmp |= CPU_CONF_TA_DELAY;
|
|
|
|
GT_REG_WRITE(CPU_CONFIGURATION, tmp);
|
|
|
|
/* CPU master control register */
|
|
tmp = GTREGREAD(CPU_MASTER_CONTROL);
|
|
|
|
tmp |= CPU_MAST_CTL_ARB_EN;
|
|
|
|
if ((cpu == CPU_7400) ||
|
|
(cpu == CPU_7410) ||
|
|
(cpu == CPU_7450)) {
|
|
|
|
tmp |= CPU_MAST_CTL_CLEAN_BLK;
|
|
tmp |= CPU_MAST_CTL_FLUSH_BLK;
|
|
|
|
} else {
|
|
/* cleanblock must be cleared for CPUs
|
|
* that do not support this command
|
|
* see Res#1 */
|
|
tmp &= ~CPU_MAST_CTL_CLEAN_BLK;
|
|
tmp &= ~CPU_MAST_CTL_FLUSH_BLK;
|
|
}
|
|
GT_REG_WRITE(CPU_MASTER_CONTROL, tmp);
|
|
}
|
|
|
|
/*
|
|
* board_early_init_f.
|
|
*
|
|
* set up gal. device mappings, etc.
|
|
*/
|
|
int board_early_init_f (void)
|
|
{
|
|
uchar sram_boot = 0;
|
|
|
|
/*
|
|
* set up the GT the way the kernel wants it
|
|
* the call to move the GT register space will obviously
|
|
* fail if it has already been done, but we're going to assume
|
|
* that if it's not at the power-on location, it's where we put
|
|
* it last time. (huber)
|
|
*/
|
|
my_remap_gt_regs(CFG_DFL_GT_REGS, CFG_GT_REGS);
|
|
|
|
gt_pci_config();
|
|
|
|
/* mask all external interrupt sources */
|
|
GT_REG_WRITE(CPU_INTERRUPT_MASK_REGISTER_LOW, 0);
|
|
GT_REG_WRITE(CPU_INTERRUPT_MASK_REGISTER_HIGH, 0);
|
|
GT_REG_WRITE(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
|
|
GT_REG_WRITE(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
|
|
GT_REG_WRITE(PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
|
|
GT_REG_WRITE(PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
|
|
GT_REG_WRITE(CPU_INT_0_MASK, 0);
|
|
GT_REG_WRITE(CPU_INT_1_MASK, 0);
|
|
GT_REG_WRITE(CPU_INT_2_MASK, 0);
|
|
GT_REG_WRITE(CPU_INT_3_MASK, 0);
|
|
|
|
/* now, onto the configuration */
|
|
GT_REG_WRITE(SDRAM_CONFIGURATION, CFG_SDRAM_CONFIG);
|
|
|
|
/* ----- DEVICE BUS SETTINGS ------ */
|
|
|
|
/*
|
|
* EVB
|
|
* 0 - SRAM
|
|
* 1 - RTC
|
|
* 2 - UART
|
|
* 3 - Flash
|
|
* boot - BootCS
|
|
*
|
|
* Zuma
|
|
* 0 - Flash
|
|
* boot - BootCS
|
|
*/
|
|
|
|
/*
|
|
* the dual 7450 module requires burst access to the boot
|
|
* device, so the serial rom copies the boot device to the
|
|
* on-board sram on the eval board, and updates the correct
|
|
* registers to boot from the sram. (device0)
|
|
*/
|
|
#if defined(CONFIG_ZUMA_V2) || defined(CONFIG_P3G4)
|
|
/* Zuma has no SRAM */
|
|
sram_boot = 0;
|
|
#else
|
|
if (memoryGetDeviceBaseAddress(DEVICE0) && 0xfff00000 == CFG_MONITOR_BASE)
|
|
sram_boot = 1;
|
|
#endif
|
|
|
|
if (!sram_boot)
|
|
memoryMapDeviceSpace(DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
|
|
|
|
memoryMapDeviceSpace(DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
|
|
memoryMapDeviceSpace(DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
|
|
memoryMapDeviceSpace(DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
|
|
|
|
/* configure device timing */
|
|
#ifdef CFG_DEV0_PAR
|
|
if (!sram_boot)
|
|
GT_REG_WRITE(DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
|
|
#endif
|
|
|
|
#ifdef CFG_DEV1_PAR
|
|
GT_REG_WRITE(DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
|
|
#endif
|
|
#ifdef CFG_DEV2_PAR
|
|
GT_REG_WRITE(DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
|
|
#endif
|
|
|
|
#ifdef CONFIG_EVB64260
|
|
#ifdef CFG_32BIT_BOOT_PAR
|
|
/* detect if we are booting from the 32 bit flash */
|
|
if (GTREGREAD(DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
|
|
/* 32 bit boot flash */
|
|
GT_REG_WRITE(DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
|
|
GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_32BIT_BOOT_PAR);
|
|
} else {
|
|
/* 8 bit boot flash */
|
|
GT_REG_WRITE(DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
|
|
GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
|
|
}
|
|
#else
|
|
/* 8 bit boot flash only */
|
|
GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
|
|
#endif
|
|
#else /* CONFIG_EVB64260 not defined */
|
|
/* We are booting from 16-bit flash.
|
|
*/
|
|
GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_16BIT_BOOT_PAR);
|
|
#endif
|
|
|
|
gt_cpu_config();
|
|
|
|
/* MPP setup */
|
|
GT_REG_WRITE(MPP_CONTROL0, CFG_MPP_CONTROL_0);
|
|
GT_REG_WRITE(MPP_CONTROL1, CFG_MPP_CONTROL_1);
|
|
GT_REG_WRITE(MPP_CONTROL2, CFG_MPP_CONTROL_2);
|
|
GT_REG_WRITE(MPP_CONTROL3, CFG_MPP_CONTROL_3);
|
|
|
|
GT_REG_WRITE(GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
|
|
GT_REG_WRITE(SERIAL_PORT_MULTIPLEX, CFG_SERIAL_PORT_MUX);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* various things to do after relocation */
|
|
|
|
int misc_init_r (void)
|
|
{
|
|
icache_enable();
|
|
#ifdef CFG_L2
|
|
l2cache_enable();
|
|
#endif
|
|
|
|
#ifdef CONFIG_MPSC
|
|
mpsc_init2();
|
|
#endif
|
|
|
|
#ifdef CONFIG_ZUMA_V2
|
|
zuma_mbox_init();
|
|
#endif
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
after_reloc(ulong dest_addr)
|
|
{
|
|
/* check to see if we booted from the sram. If so, move things
|
|
* back to the way they should be. (we're running from main
|
|
* memory at this point now */
|
|
|
|
if (memoryGetDeviceBaseAddress(DEVICE0) == CFG_MONITOR_BASE) {
|
|
memoryMapDeviceSpace(DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
|
|
memoryMapDeviceSpace(BOOT_DEVICE, CFG_FLASH_BASE, _1M);
|
|
}
|
|
|
|
/* now, jump to the main U-Boot board init code */
|
|
board_init_r ((gd_t *)gd, dest_addr);
|
|
|
|
/* NOTREACHED */
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
|
|
int
|
|
checkboard (void)
|
|
{
|
|
puts ("Board: " CFG_BOARD_NAME "\n");
|
|
return (0);
|
|
}
|
|
|
|
/* utility functions */
|
|
void
|
|
debug_led(int led, int mode)
|
|
{
|
|
#if !defined(CONFIG_ZUMA_V2) && !defined(CONFIG_P3G4)
|
|
volatile int *addr = NULL;
|
|
int dummy;
|
|
|
|
if (mode == 1) {
|
|
switch (led) {
|
|
case 0:
|
|
addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x08000);
|
|
break;
|
|
|
|
case 1:
|
|
addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x0c000);
|
|
break;
|
|
|
|
case 2:
|
|
addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x10000);
|
|
break;
|
|
}
|
|
} else if (mode == 0) {
|
|
switch (led) {
|
|
case 0:
|
|
addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x14000);
|
|
break;
|
|
|
|
case 1:
|
|
addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x18000);
|
|
break;
|
|
|
|
case 2:
|
|
addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x1c000);
|
|
break;
|
|
}
|
|
}
|
|
WRITE_CHAR(addr, 0);
|
|
dummy = *addr;
|
|
#endif /* CONFIG_ZUMA_V2 */
|
|
}
|
|
|
|
void
|
|
display_mem_map(void)
|
|
{
|
|
int i,j;
|
|
unsigned int base,size,width;
|
|
/* SDRAM */
|
|
printf("SDRAM\n");
|
|
for(i=0;i<=BANK3;i++) {
|
|
base = memoryGetBankBaseAddress(i);
|
|
size = memoryGetBankSize(i);
|
|
if(size !=0)
|
|
{
|
|
printf("BANK%d: base - 0x%08x\tsize - %dM bytes\n",i,base,size>>20);
|
|
}
|
|
}
|
|
|
|
/* CPU's PCI windows */
|
|
for(i=0;i<=PCI_HOST1;i++) {
|
|
printf("\nCPU's PCI %d windows\n", i);
|
|
base=pciGetSpaceBase(i,PCI_IO);
|
|
size=pciGetSpaceSize(i,PCI_IO);
|
|
printf(" IO: base - 0x%08x\tsize - %dM bytes\n",base,size>>20);
|
|
for(j=0;j<=PCI_REGION3;j++) {
|
|
base = pciGetSpaceBase(i,j);
|
|
size = pciGetSpaceSize(i,j);
|
|
printf("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n",j,base,
|
|
size>>20);
|
|
}
|
|
}
|
|
|
|
/* Devices */
|
|
printf("\nDEVICES\n");
|
|
for(i=0;i<=DEVICE3;i++) {
|
|
base = memoryGetDeviceBaseAddress(i);
|
|
size = memoryGetDeviceSize(i);
|
|
width= memoryGetDeviceWidth(i) * 8;
|
|
printf("DEV %d: base - 0x%08x\tsize - %dM bytes\twidth - %d bits\n",
|
|
i, base, size>>20, width);
|
|
}
|
|
|
|
/* Bootrom */
|
|
base = memoryGetDeviceBaseAddress(BOOT_DEVICE); /* Boot */
|
|
size = memoryGetDeviceSize(BOOT_DEVICE);
|
|
width= memoryGetDeviceWidth(BOOT_DEVICE) * 8;
|
|
printf(" BOOT: base - 0x%08x\tsize - %dM bytes\twidth - %d bits\n",
|
|
base, size>>20, width);
|
|
}
|