u-boot/arch/arm/mach-socfpga/spl_a10.c
Simon Glass db41d65a97 common: Move hang() to the same header as panic()
At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Migrate a few more files]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17 17:53:40 -05:00

137 lines
3.2 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012-2019 Altera Corporation <www.altera.com>
*/
#include <common.h>
#include <cpu_func.h>
#include <hang.h>
#include <asm/io.h>
#include <asm/pl310.h>
#include <asm/u-boot.h>
#include <asm/utils.h>
#include <image.h>
#include <asm/arch/reset_manager.h>
#include <spl.h>
#include <asm/arch/system_manager.h>
#include <asm/arch/freeze_controller.h>
#include <asm/arch/clock_manager.h>
#include <asm/arch/scan_manager.h>
#include <asm/arch/sdram.h>
#include <asm/arch/scu.h>
#include <asm/arch/misc.h>
#include <asm/arch/nic301.h>
#include <asm/sections.h>
#include <fdtdec.h>
#include <watchdog.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/fpga_manager.h>
#include <mmc.h>
#include <memalign.h>
#define FPGA_BUFSIZ 16 * 1024
DECLARE_GLOBAL_DATA_PTR;
u32 spl_boot_device(void)
{
const u32 bsel = readl(socfpga_get_sysmgr_addr() + SYSMGR_A10_BOOTINFO);
switch (SYSMGR_GET_BOOTINFO_BSEL(bsel)) {
case 0x1: /* FPGA (HPS2FPGA Bridge) */
return BOOT_DEVICE_RAM;
case 0x2: /* NAND Flash (1.8V) */
case 0x3: /* NAND Flash (3.0V) */
socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
return BOOT_DEVICE_NAND;
case 0x4: /* SD/MMC External Transceiver (1.8V) */
case 0x5: /* SD/MMC Internal Transceiver (3.0V) */
socfpga_per_reset(SOCFPGA_RESET(SDMMC), 0);
socfpga_per_reset(SOCFPGA_RESET(DMA), 0);
return BOOT_DEVICE_MMC1;
case 0x6: /* QSPI Flash (1.8V) */
case 0x7: /* QSPI Flash (3.0V) */
socfpga_per_reset(SOCFPGA_RESET(QSPI), 0);
return BOOT_DEVICE_SPI;
default:
printf("Invalid boot device (bsel=%08x)!\n", bsel);
hang();
}
}
#ifdef CONFIG_SPL_MMC_SUPPORT
u32 spl_boot_mode(const u32 boot_device)
{
#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
return MMCSD_MODE_FS;
#else
return MMCSD_MODE_RAW;
#endif
}
#endif
void spl_board_init(void)
{
ALLOC_CACHE_ALIGN_BUFFER(char, buf, FPGA_BUFSIZ);
/* enable console uart printing */
preloader_console_init();
WATCHDOG_RESET();
arch_early_init_r();
/* If the full FPGA is already loaded, ie.from EPCQ, config fpga pins */
if (is_fpgamgr_user_mode()) {
int ret = config_pins(gd->fdt_blob, "shared");
if (ret)
return;
ret = config_pins(gd->fdt_blob, "fpga");
if (ret)
return;
} else if (!is_fpgamgr_early_user_mode()) {
/* Program IOSSM(early IO release) or full FPGA */
fpgamgr_program(buf, FPGA_BUFSIZ, 0);
}
/* If the IOSSM/full FPGA is already loaded, start DDR */
if (is_fpgamgr_early_user_mode() || is_fpgamgr_user_mode())
ddr_calibration_sequence();
if (!is_fpgamgr_user_mode())
fpgamgr_program(buf, FPGA_BUFSIZ, 0);
}
void board_init_f(ulong dummy)
{
if (spl_early_init())
hang();
socfpga_get_managers_addr();
dcache_disable();
socfpga_init_security_policies();
socfpga_sdram_remap_zero();
socfpga_pl310_clear();
/* Assert reset to all except L4WD0 and L4TIMER0 */
socfpga_per_reset_all();
socfpga_watchdog_disable();
/* Configure the clock based on handoff */
cm_basic_init(gd->fdt_blob);
#ifdef CONFIG_HW_WATCHDOG
/* release osc1 watchdog timer 0 from reset */
socfpga_reset_deassert_osc1wd0();
/* reconfigure and enable the watchdog */
hw_watchdog_init();
WATCHDOG_RESET();
#endif /* CONFIG_HW_WATCHDOG */
config_dedicated_pins(gd->fdt_blob);
WATCHDOG_RESET();
}