u-boot/configs/Bananapro_defconfig
Hans de Goede 54be0f0578 sunxi: Bananapro: Set LDO4 to 2.5V
According to the Bananapro schematic VDD25-SATA either comes from a
dedicated WL2003E25-5 LTO, or it is connected to LDO4 via a
0 Ohm resistor.

In practice it seems that LDO4 is used, so enable it and set it to 2.5V.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00

20 lines
551 B
Text

CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN="PH0"
CONFIG_USB2_VBUS_PIN="PH1"
CONFIG_VIDEO_COMPOSITE=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_NETCONSOLE=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
CONFIG_AXP_ALDO4_VOLT=2500