u-boot/drivers/pci/pci.c
Kumar Gala cf5787f2a4 pci: fix some warnings related to assumptions about
The following commit introduced some warnings associated with using
pci_addr_t instead of a proper 32-bit data type.

commit af778c6d9e
Author: Andrew Sharp <andywyse6@gmail.com>
Date:   Wed Aug 1 12:27:16 2012 +0000

    pci: fix errant data types and corresponding access functions

On some platforms pci_addr_t is defined as a 64-bit data type so its not
proper to use with pci_{read,write}_config_dword.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-22 00:24:34 +02:00

740 lines
18 KiB
C

/*
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Andreas Heppel <aheppel@sysgo.de>
*
* (C) Copyright 2002, 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* PCI routines
*/
#include <common.h>
#include <command.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <pci.h>
#define PCI_HOSE_OP(rw, size, type) \
int pci_hose_##rw##_config_##size(struct pci_controller *hose, \
pci_dev_t dev, \
int offset, type value) \
{ \
return hose->rw##_##size(hose, dev, offset, value); \
}
PCI_HOSE_OP(read, byte, u8 *)
PCI_HOSE_OP(read, word, u16 *)
PCI_HOSE_OP(read, dword, u32 *)
PCI_HOSE_OP(write, byte, u8)
PCI_HOSE_OP(write, word, u16)
PCI_HOSE_OP(write, dword, u32)
#define PCI_OP(rw, size, type, error_code) \
int pci_##rw##_config_##size(pci_dev_t dev, int offset, type value) \
{ \
struct pci_controller *hose = pci_bus_to_hose(PCI_BUS(dev)); \
\
if (!hose) \
{ \
error_code; \
return -1; \
} \
\
return pci_hose_##rw##_config_##size(hose, dev, offset, value); \
}
PCI_OP(read, byte, u8 *, *value = 0xff)
PCI_OP(read, word, u16 *, *value = 0xffff)
PCI_OP(read, dword, u32 *, *value = 0xffffffff)
PCI_OP(write, byte, u8, )
PCI_OP(write, word, u16, )
PCI_OP(write, dword, u32, )
#define PCI_READ_VIA_DWORD_OP(size, type, off_mask) \
int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\
pci_dev_t dev, \
int offset, type val) \
{ \
u32 val32; \
\
if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) { \
*val = -1; \
return -1; \
} \
\
*val = (val32 >> ((offset & (int)off_mask) * 8)); \
\
return 0; \
}
#define PCI_WRITE_VIA_DWORD_OP(size, type, off_mask, val_mask) \
int pci_hose_write_config_##size##_via_dword(struct pci_controller *hose,\
pci_dev_t dev, \
int offset, type val) \
{ \
u32 val32, mask, ldata, shift; \
\
if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\
return -1; \
\
shift = ((offset & (int)off_mask) * 8); \
ldata = (((unsigned long)val) & val_mask) << shift; \
mask = val_mask << shift; \
val32 = (val32 & ~mask) | ldata; \
\
if (pci_hose_write_config_dword(hose, dev, offset & 0xfc, val32) < 0)\
return -1; \
\
return 0; \
}
PCI_READ_VIA_DWORD_OP(byte, u8 *, 0x03)
PCI_READ_VIA_DWORD_OP(word, u16 *, 0x02)
PCI_WRITE_VIA_DWORD_OP(byte, u8, 0x03, 0x000000ff)
PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff)
/* Get a virtual address associated with a BAR region */
void *pci_map_bar(pci_dev_t pdev, int bar, int flags)
{
pci_addr_t pci_bus_addr;
u32 bar_response;
/* read BAR address */
pci_read_config_dword(pdev, bar, &bar_response);
pci_bus_addr = (pci_addr_t)(bar_response & ~0xf);
/*
* Pass "0" as the length argument to pci_bus_to_virt. The arg
* isn't actualy used on any platform because u-boot assumes a static
* linear mapping. In the future, this could read the BAR size
* and pass that as the size if needed.
*/
return pci_bus_to_virt(pdev, pci_bus_addr, flags, 0, MAP_NOCACHE);
}
/*
*
*/
static struct pci_controller* hose_head;
void pci_register_hose(struct pci_controller* hose)
{
struct pci_controller **phose = &hose_head;
while(*phose)
phose = &(*phose)->next;
hose->next = NULL;
*phose = hose;
}
struct pci_controller *pci_bus_to_hose(int bus)
{
struct pci_controller *hose;
for (hose = hose_head; hose; hose = hose->next) {
if (bus >= hose->first_busno && bus <= hose->last_busno)
return hose;
}
printf("pci_bus_to_hose() failed\n");
return NULL;
}
struct pci_controller *find_hose_by_cfg_addr(void *cfg_addr)
{
struct pci_controller *hose;
for (hose = hose_head; hose; hose = hose->next) {
if (hose->cfg_addr == cfg_addr)
return hose;
}
return NULL;
}
int pci_last_busno(void)
{
struct pci_controller *hose = hose_head;
if (!hose)
return -1;
while (hose->next)
hose = hose->next;
return hose->last_busno;
}
pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
{
struct pci_controller * hose;
u16 vendor, device;
u8 header_type;
pci_dev_t bdf;
int i, bus, found_multi = 0;
for (hose = hose_head; hose; hose = hose->next) {
#ifdef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
for (bus = hose->last_busno; bus >= hose->first_busno; bus--)
#else
for (bus = hose->first_busno; bus <= hose->last_busno; bus++)
#endif
for (bdf = PCI_BDF(bus, 0, 0);
#if defined(CONFIG_ELPPC) || defined(CONFIG_PPMC7XX)
bdf < PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1,
PCI_MAX_PCI_FUNCTIONS - 1);
#else
bdf < PCI_BDF(bus + 1, 0, 0);
#endif
bdf += PCI_BDF(0, 0, 1)) {
if (!PCI_FUNC(bdf)) {
pci_read_config_byte(bdf,
PCI_HEADER_TYPE,
&header_type);
found_multi = header_type & 0x80;
} else {
if (!found_multi)
continue;
}
pci_read_config_word(bdf,
PCI_VENDOR_ID,
&vendor);
pci_read_config_word(bdf,
PCI_DEVICE_ID,
&device);
for (i = 0; ids[i].vendor != 0; i++) {
if (vendor == ids[i].vendor &&
device == ids[i].device) {
if (index <= 0)
return bdf;
index--;
}
}
}
}
return -1;
}
pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index)
{
static struct pci_device_id ids[2] = {{}, {0, 0}};
ids[0].vendor = vendor;
ids[0].device = device;
return pci_find_devices(ids, index);
}
/*
*
*/
int __pci_hose_phys_to_bus(struct pci_controller *hose,
phys_addr_t phys_addr,
unsigned long flags,
unsigned long skip_mask,
pci_addr_t *ba)
{
struct pci_region *res;
pci_addr_t bus_addr;
int i;
for (i = 0; i < hose->region_count; i++) {
res = &hose->regions[i];
if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0)
continue;
if (res->flags & skip_mask)
continue;
bus_addr = phys_addr - res->phys_start + res->bus_start;
if (bus_addr >= res->bus_start &&
bus_addr < res->bus_start + res->size) {
*ba = bus_addr;
return 0;
}
}
return 1;
}
pci_addr_t pci_hose_phys_to_bus (struct pci_controller *hose,
phys_addr_t phys_addr,
unsigned long flags)
{
pci_addr_t bus_addr = 0;
int ret;
if (!hose) {
puts("pci_hose_phys_to_bus: invalid hose\n");
return bus_addr;
}
/*
* if PCI_REGION_MEM is set we do a two pass search with preference
* on matches that don't have PCI_REGION_SYS_MEMORY set
*/
if ((flags & PCI_REGION_MEM) == PCI_REGION_MEM) {
ret = __pci_hose_phys_to_bus(hose, phys_addr,
flags, PCI_REGION_SYS_MEMORY, &bus_addr);
if (!ret)
return bus_addr;
}
ret = __pci_hose_phys_to_bus(hose, phys_addr, flags, 0, &bus_addr);
if (ret)
puts("pci_hose_phys_to_bus: invalid physical address\n");
return bus_addr;
}
int __pci_hose_bus_to_phys(struct pci_controller *hose,
pci_addr_t bus_addr,
unsigned long flags,
unsigned long skip_mask,
phys_addr_t *pa)
{
struct pci_region *res;
int i;
for (i = 0; i < hose->region_count; i++) {
res = &hose->regions[i];
if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0)
continue;
if (res->flags & skip_mask)
continue;
if (bus_addr >= res->bus_start &&
bus_addr < res->bus_start + res->size) {
*pa = (bus_addr - res->bus_start + res->phys_start);
return 0;
}
}
return 1;
}
phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose,
pci_addr_t bus_addr,
unsigned long flags)
{
phys_addr_t phys_addr = 0;
int ret;
if (!hose) {
puts("pci_hose_bus_to_phys: invalid hose\n");
return phys_addr;
}
/*
* if PCI_REGION_MEM is set we do a two pass search with preference
* on matches that don't have PCI_REGION_SYS_MEMORY set
*/
if ((flags & PCI_REGION_MEM) == PCI_REGION_MEM) {
ret = __pci_hose_bus_to_phys(hose, bus_addr,
flags, PCI_REGION_SYS_MEMORY, &phys_addr);
if (!ret)
return phys_addr;
}
ret = __pci_hose_bus_to_phys(hose, bus_addr, flags, 0, &phys_addr);
if (ret)
puts("pci_hose_bus_to_phys: invalid physical address\n");
return phys_addr;
}
/*
*
*/
int pci_hose_config_device(struct pci_controller *hose,
pci_dev_t dev,
unsigned long io,
pci_addr_t mem,
unsigned long command)
{
u32 bar_response;
unsigned int old_command;
pci_addr_t bar_value;
pci_size_t bar_size;
unsigned char pin;
int bar, found_mem64;
debug("PCI Config: I/O=0x%lx, Memory=0x%llx, Command=0x%lx\n", io,
(u64)mem, command);
pci_hose_write_config_dword(hose, dev, PCI_COMMAND, 0);
for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_5; bar += 4) {
pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
pci_hose_read_config_dword(hose, dev, bar, &bar_response);
if (!bar_response)
continue;
found_mem64 = 0;
/* Check the BAR type and set our address mask */
if (bar_response & PCI_BASE_ADDRESS_SPACE) {
bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1;
/* round up region base address to a multiple of size */
io = ((io - 1) | (bar_size - 1)) + 1;
bar_value = io;
/* compute new region base address */
io = io + bar_size;
} else {
if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
PCI_BASE_ADDRESS_MEM_TYPE_64) {
u32 bar_response_upper;
u64 bar64;
pci_hose_write_config_dword(hose, dev, bar + 4,
0xffffffff);
pci_hose_read_config_dword(hose, dev, bar + 4,
&bar_response_upper);
bar64 = ((u64)bar_response_upper << 32) | bar_response;
bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
found_mem64 = 1;
} else {
bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
}
/* round up region base address to multiple of size */
mem = ((mem - 1) | (bar_size - 1)) + 1;
bar_value = mem;
/* compute new region base address */
mem = mem + bar_size;
}
/* Write it out and update our limit */
pci_hose_write_config_dword (hose, dev, bar, (u32)bar_value);
if (found_mem64) {
bar += 4;
#ifdef CONFIG_SYS_PCI_64BIT
pci_hose_write_config_dword(hose, dev, bar,
(u32)(bar_value >> 32));
#else
pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
#endif
}
}
/* Configure Cache Line Size Register */
pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
/* Configure Latency Timer */
pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
/* Disable interrupt line, if device says it wants to use interrupts */
pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &pin);
if (pin != 0) {
pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 0xff);
}
pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &old_command);
pci_hose_write_config_dword(hose, dev, PCI_COMMAND,
(old_command & 0xffff0000) | command);
return 0;
}
/*
*
*/
struct pci_config_table *pci_find_config(struct pci_controller *hose,
unsigned short class,
unsigned int vendor,
unsigned int device,
unsigned int bus,
unsigned int dev,
unsigned int func)
{
struct pci_config_table *table;
for (table = hose->config_table; table && table->vendor; table++) {
if ((table->vendor == PCI_ANY_ID || table->vendor == vendor) &&
(table->device == PCI_ANY_ID || table->device == device) &&
(table->class == PCI_ANY_ID || table->class == class) &&
(table->bus == PCI_ANY_ID || table->bus == bus) &&
(table->dev == PCI_ANY_ID || table->dev == dev) &&
(table->func == PCI_ANY_ID || table->func == func)) {
return table;
}
}
return NULL;
}
void pci_cfgfunc_config_device(struct pci_controller *hose,
pci_dev_t dev,
struct pci_config_table *entry)
{
pci_hose_config_device(hose, dev, entry->priv[0], entry->priv[1],
entry->priv[2]);
}
void pci_cfgfunc_do_nothing(struct pci_controller *hose,
pci_dev_t dev, struct pci_config_table *entry)
{
}
/*
* HJF: Changed this to return int. I think this is required
* to get the correct result when scanning bridges
*/
extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);
#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI_SCAN_SHOW)
const char * pci_class_str(u8 class)
{
switch (class) {
case PCI_CLASS_NOT_DEFINED:
return "Build before PCI Rev2.0";
break;
case PCI_BASE_CLASS_STORAGE:
return "Mass storage controller";
break;
case PCI_BASE_CLASS_NETWORK:
return "Network controller";
break;
case PCI_BASE_CLASS_DISPLAY:
return "Display controller";
break;
case PCI_BASE_CLASS_MULTIMEDIA:
return "Multimedia device";
break;
case PCI_BASE_CLASS_MEMORY:
return "Memory controller";
break;
case PCI_BASE_CLASS_BRIDGE:
return "Bridge device";
break;
case PCI_BASE_CLASS_COMMUNICATION:
return "Simple comm. controller";
break;
case PCI_BASE_CLASS_SYSTEM:
return "Base system peripheral";
break;
case PCI_BASE_CLASS_INPUT:
return "Input device";
break;
case PCI_BASE_CLASS_DOCKING:
return "Docking station";
break;
case PCI_BASE_CLASS_PROCESSOR:
return "Processor";
break;
case PCI_BASE_CLASS_SERIAL:
return "Serial bus controller";
break;
case PCI_BASE_CLASS_INTELLIGENT:
return "Intelligent controller";
break;
case PCI_BASE_CLASS_SATELLITE:
return "Satellite controller";
break;
case PCI_BASE_CLASS_CRYPT:
return "Cryptographic device";
break;
case PCI_BASE_CLASS_SIGNAL_PROCESSING:
return "DSP";
break;
case PCI_CLASS_OTHERS:
return "Does not fit any class";
break;
default:
return "???";
break;
};
}
#endif /* CONFIG_CMD_PCI || CONFIG_PCI_SCAN_SHOW */
int __pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
{
/*
* Check if pci device should be skipped in configuration
*/
if (dev == PCI_BDF(hose->first_busno, 0, 0)) {
#if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE) /* don't skip host bridge */
/*
* Only skip configuration if "pciconfighost" is not set
*/
if (getenv("pciconfighost") == NULL)
return 1;
#else
return 1;
#endif
}
return 0;
}
int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
__attribute__((weak, alias("__pci_skip_dev")));
#ifdef CONFIG_PCI_SCAN_SHOW
int __pci_print_dev(struct pci_controller *hose, pci_dev_t dev)
{
if (dev == PCI_BDF(hose->first_busno, 0, 0))
return 0;
return 1;
}
int pci_print_dev(struct pci_controller *hose, pci_dev_t dev)
__attribute__((weak, alias("__pci_print_dev")));
#endif /* CONFIG_PCI_SCAN_SHOW */
int pci_hose_scan_bus(struct pci_controller *hose, int bus)
{
unsigned int sub_bus, found_multi = 0;
unsigned short vendor, device, class;
unsigned char header_type;
#ifndef CONFIG_PCI_PNP
struct pci_config_table *cfg;
#endif
pci_dev_t dev;
#ifdef CONFIG_PCI_SCAN_SHOW
static int indent = 0;
#endif
sub_bus = bus;
for (dev = PCI_BDF(bus,0,0);
dev < PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1,
PCI_MAX_PCI_FUNCTIONS - 1);
dev += PCI_BDF(0, 0, 1)) {
if (pci_skip_dev(hose, dev))
continue;
if (PCI_FUNC(dev) && !found_multi)
continue;
pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);
pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor);
if (vendor == 0xffff || vendor == 0x0000)
continue;
if (!PCI_FUNC(dev))
found_multi = header_type & 0x80;
debug("PCI Scan: Found Bus %d, Device %d, Function %d\n",
PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev));
pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device);
pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
#ifdef CONFIG_PCI_SCAN_SHOW
indent++;
/* Print leading space, including bus indentation */
printf("%*c", indent + 1, ' ');
if (pci_print_dev(hose, dev)) {
printf("%02x:%02x.%-*x - %04x:%04x - %s\n",
PCI_BUS(dev), PCI_DEV(dev), 6 - indent, PCI_FUNC(dev),
vendor, device, pci_class_str(class >> 8));
}
#endif
#ifdef CONFIG_PCI_PNP
sub_bus = max(pciauto_config_device(hose, dev), sub_bus);
#else
cfg = pci_find_config(hose, class, vendor, device,
PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev));
if (cfg) {
cfg->config_device(hose, dev, cfg);
sub_bus = max(sub_bus, hose->current_busno);
}
#endif
#ifdef CONFIG_PCI_SCAN_SHOW
indent--;
#endif
if (hose->fixup_irq)
hose->fixup_irq(hose, dev);
}
return sub_bus;
}
int pci_hose_scan(struct pci_controller *hose)
{
#if defined(CONFIG_PCI_BOOTDELAY)
static int pcidelay_done;
char *s;
int i;
if (!pcidelay_done) {
/* wait "pcidelay" ms (if defined)... */
s = getenv("pcidelay");
if (s) {
int val = simple_strtoul(s, NULL, 10);
for (i = 0; i < val; i++)
udelay(1000);
}
pcidelay_done = 1;
}
#endif /* CONFIG_PCI_BOOTDELAY */
/*
* Start scan at current_busno.
* PCIe will start scan at first_busno+1.
*/
/* For legacy support, ensure current >= first */
if (hose->first_busno > hose->current_busno)
hose->current_busno = hose->first_busno;
#ifdef CONFIG_PCI_PNP
pciauto_config_init(hose);
#endif
return pci_hose_scan_bus(hose, hose->current_busno);
}
void pci_init(void)
{
hose_head = NULL;
/* now call board specific pci_init()... */
pci_init_board();
}