mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 16:07:30 +00:00
1c281dc2ba
Add u-boot.itb BUILD_TARGET for Rockchip platform when SPL_LOAD_FIT is being used. This can get rid of building itb explicitly with 'make u-boot.itb' so, from now all required images will build just by make. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
107 lines
3 KiB
Text
107 lines
3 KiB
Text
Introduction
|
|
============
|
|
|
|
The RK3399-Q7 (Puma) is a system-on-module featuring the Rockchip
|
|
RK3399 in a Qseven-compatible form-factor.
|
|
|
|
RK3399-Q7 features:
|
|
* CPU: ARMv8 64bit Big-Little architecture,
|
|
* Big: dual-core Cortex-A72
|
|
* Little: quad-core Cortex-A53
|
|
* IRAM: 200KB
|
|
* DRAM: 4GB-128MB dual-channel
|
|
* eMMC: onboard eMMC
|
|
* SD/MMC
|
|
* GbE (onboard Micrel KSZ9031) Gigabit ethernet PHY
|
|
* USB:
|
|
* USB3.0 dual role port
|
|
* 2x USB3.0 host, 1x USB2.0 host via onboard USB3.0 hub
|
|
* Display: HDMI/eDP/MIPI
|
|
* Camera: 2x CSI (one on the edge connector, one on the Q7 specified CSI ZIF)
|
|
* NOR Flash: onboard SPI NOR
|
|
* Companion Controller: onboard additional Cortex-M0 microcontroller
|
|
* RTC
|
|
* fan controller
|
|
* CAN
|
|
|
|
Here is the step-by-step to boot to U-Boot on rk3399.
|
|
|
|
Get the Source and build ATF/Cortex-M0 binaries
|
|
===============================================
|
|
|
|
> git clone git://git.theobroma-systems.com/arm-trusted-firmware.git
|
|
> git clone git://git.theobroma-systems.com/rk3399-cortex-m0.git
|
|
|
|
Compile the ATF
|
|
===============
|
|
|
|
> cd arm-trusted-firmware
|
|
> make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
|
|
> cp build/rk3399/release/bl31.bin ../u-boot/bl31-rk3399.bin
|
|
|
|
Compile the M0 firmware
|
|
=======================
|
|
|
|
> cd ../rk3399-cortex-m0
|
|
> make CROSS_COMPILE=arm-cortex_m0-eabi-
|
|
> cp rk3399m0.bin ../u-boot
|
|
|
|
Compile the U-Boot
|
|
==================
|
|
|
|
> cd ../u-boot
|
|
> make CROSS_COMPILE=aarch64-linux-gnu- puma-rk3399_defconfig all
|
|
|
|
Package the image
|
|
=================
|
|
|
|
Creating a SPL image for SD-Card/eMMC
|
|
> tools/mkimage -n rk3399 -T rksd -d spl/u-boot-spl.bin spl_mmc.img
|
|
Creating a SPL image for SPI-NOR
|
|
> tools/mkimage -n rk3399 -T rkspi -d spl/u-boot-spl.bin spl_nor.img
|
|
Create the FIT image containing U-Boot proper, ATF, M0 Firmware, devicetree
|
|
> make CROSS_COMPILE=aarch64-linux-gnu-
|
|
|
|
Flash the image
|
|
===============
|
|
|
|
Copy the SPL to offset 32k for SD/eMMC, offset 0 for NOR-Flash and the FIT
|
|
image to offset 256k card.
|
|
|
|
SD-Card
|
|
-------
|
|
|
|
> dd if=spl_mmc.img of=/dev/sdb seek=64
|
|
> dd if=u-boot.itb of=/dev/sdb seek=512
|
|
|
|
eMMC
|
|
----
|
|
|
|
rkdeveloptool allows to flash the on-board eMMC via the USB OTG interface with
|
|
help of the Rockchip loader binary.
|
|
|
|
> git clone https://github.com/rockchip-linux/rkdeveloptool
|
|
> cd rkdeveloptool
|
|
> autoreconf -i && ./configure && make
|
|
> git clone https://github.com/rockchip-linux/rkbin.git
|
|
> ./rkdeveloptool db rkbin/rk33/rk3399_loader_v1.08.106.bin
|
|
> ./rkdeveloptool wl 64 ../spl_mmc.img
|
|
> ./rkdeveloptool wl 512 ../u-boot.itb
|
|
|
|
NOR-Flash
|
|
---------
|
|
|
|
Writing the SPI NOR Flash requires a running U-Boot. For the sake of simplicity
|
|
we assume you have a SD-Card with a partition containing the required files
|
|
ready.
|
|
|
|
> load mmc 1:1 ${kernel_addr_r} spl_nor.img
|
|
> sf probe
|
|
> sf erase 0 +$filesize
|
|
> sf write $kernel_addr_r 0 ${filesize}
|
|
> load mmc 1:1 ${kernel_addr_r} u-boot.itb
|
|
> sf erase 0x40000 +$filesize
|
|
> sf write $kernel_addr_r 0x40000 ${filesize}
|
|
|
|
|
|
Reboot the system and you should see a U-Boot console on UART0 (115200n8).
|