mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 12:33:41 +00:00
a8c281d4b7
This converts the following to Kconfig: CONFIG_REMAKE_ELF Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
256 lines
7.4 KiB
C
256 lines
7.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Configuration for Xilinx ZynqMP
|
|
* (C) Copyright 2014 - 2015 Xilinx, Inc.
|
|
* Michal Simek <michal.simek@xilinx.com>
|
|
*
|
|
* Based on Configuration for Versatile Express
|
|
*/
|
|
|
|
#ifndef __XILINX_ZYNQMP_H
|
|
#define __XILINX_ZYNQMP_H
|
|
|
|
/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
|
|
|
|
/* Generic Interrupt Controller Definitions */
|
|
#define GICD_BASE 0xF9010000
|
|
#define GICC_BASE 0xF9020000
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
|
|
|
|
/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
|
|
#if !defined(COUNTER_FREQUENCY)
|
|
# define COUNTER_FREQUENCY 100000000
|
|
#endif
|
|
|
|
/* Serial setup */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
{ 4800, 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
/* BOOTP options */
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_MAY_FAIL
|
|
|
|
#ifdef CONFIG_NAND_ARASAN
|
|
# define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#endif
|
|
|
|
/* Miscellaneous configurable options */
|
|
|
|
#if defined(CONFIG_ZYNQMP_USB)
|
|
#define DFU_DEFAULT_POLL_TIMEOUT 300
|
|
#define CONFIG_THOR_RESET_OFF
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
# define PARTS_DEFAULT \
|
|
"partitions=uuid_disk=${uuid_gpt_disk};" \
|
|
"name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
|
|
"name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0"
|
|
#endif
|
|
#endif
|
|
|
|
#if !defined(PARTS_DEFAULT)
|
|
# define PARTS_DEFAULT
|
|
#endif
|
|
|
|
/* Monitor Command Prompt */
|
|
/* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_CBSIZE 2048
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
#define CONFIG_SYS_MAXARGS 64
|
|
|
|
/* Ethernet driver */
|
|
#if defined(CONFIG_ZYNQ_GEM)
|
|
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
|
# define PHY_ANEG_TIMEOUT 20000
|
|
#endif
|
|
|
|
#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
|
|
|
|
#define CONFIG_CLOCKS
|
|
|
|
#define ENV_MEM_LAYOUT_SETTINGS \
|
|
"fdt_addr_r=0x40000000\0" \
|
|
"fdt_size_r=0x400000\0" \
|
|
"pxefile_addr_r=0x10000000\0" \
|
|
"kernel_addr_r=0x18000000\0" \
|
|
"kernel_size_r=0x10000000\0" \
|
|
"kernel_comp_addr_r=0x30000000\0" \
|
|
"kernel_comp_size=0x3C00000\0" \
|
|
"scriptaddr=0x20000000\0" \
|
|
"ramdisk_addr_r=0x02100000\0" \
|
|
"script_size_f=0x80000\0" \
|
|
|
|
#if defined(CONFIG_MMC_SDHCI_ZYNQ)
|
|
# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
|
|
#else
|
|
# define BOOT_TARGET_DEVICES_MMC(func)
|
|
#endif
|
|
|
|
#if defined(CONFIG_SATA_CEVA)
|
|
# define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
|
|
#else
|
|
# define BOOT_TARGET_DEVICES_SCSI(func)
|
|
#endif
|
|
|
|
#if defined(CONFIG_ZYNQMP_USB)
|
|
# define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1)
|
|
#else
|
|
# define BOOT_TARGET_DEVICES_USB(func)
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
|
|
# define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
|
|
#else
|
|
# define BOOT_TARGET_DEVICES_PXE(func)
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_DHCP)
|
|
# define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
|
|
#else
|
|
# define BOOT_TARGET_DEVICES_DHCP(func)
|
|
#endif
|
|
|
|
#if defined(CONFIG_ZYNQMP_GQSPI)
|
|
# define BOOT_TARGET_DEVICES_QSPI(func) func(QSPI, qspi, 0)
|
|
#else
|
|
# define BOOT_TARGET_DEVICES_QSPI(func)
|
|
#endif
|
|
|
|
#if defined(CONFIG_NAND_ARASAN)
|
|
# define BOOT_TARGET_DEVICES_NAND(func) func(NAND, nand, 0)
|
|
#else
|
|
# define BOOT_TARGET_DEVICES_NAND(func)
|
|
#endif
|
|
|
|
#define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
|
|
"bootcmd_" #devtypel #instance "=sf probe " #instance " 0 0 && " \
|
|
"sf read $scriptaddr $script_offset_f $script_size_f && " \
|
|
"echo QSPI: Trying to boot script at ${scriptaddr} && " \
|
|
"source ${scriptaddr}; echo QSPI: SCRIPT FAILED: continuing...;\0"
|
|
|
|
#define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \
|
|
#devtypel #instance " "
|
|
|
|
#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
|
|
"bootcmd_" #devtypel #instance "= nand info && " \
|
|
"nand read $scriptaddr $script_offset_f $script_size_f && " \
|
|
"echo NAND: Trying to boot script at ${scriptaddr} && " \
|
|
"source ${scriptaddr}; echo NAND: SCRIPT FAILED: continuing...;\0"
|
|
|
|
#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
|
|
#devtypel #instance " "
|
|
|
|
#define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na)
|
|
|
|
#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \
|
|
"bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && " \
|
|
"source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;\0"
|
|
|
|
#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \
|
|
"jtag "
|
|
|
|
#define BOOT_TARGET_DEVICES_USB_DFU(func) \
|
|
func(USB_DFU, usb_dfu, 0) func(USB_DFU, usb_dfu, 1)
|
|
|
|
#define BOOTENV_DEV_USB_DFU(devtypeu, devtypel, instance) \
|
|
"bootcmd_" #devtypel #instance "=setenv dfu_alt_info boot.scr ram " \
|
|
"$scriptaddr $script_size_f && " \
|
|
"dfu " #instance " ram " #instance " 60 && " \
|
|
"echo DFU" #instance ": Trying to boot script at ${scriptaddr} && " \
|
|
"source ${scriptaddr}; " \
|
|
"echo DFU" #instance ": SCRIPT FAILED: continuing...;\0"
|
|
|
|
#define BOOTENV_DEV_NAME_USB_DFU(devtypeu, devtypel, instance) \
|
|
""
|
|
|
|
#define BOOT_TARGET_DEVICES_USB_THOR(func) \
|
|
func(USB_THOR, usb_thor, 0) func(USB_THOR, usb_thor, 1)
|
|
|
|
#define BOOTENV_DEV_USB_THOR(devtypeu, devtypel, instance) \
|
|
"bootcmd_" #devtypel #instance "=setenv dfu_alt_info boot.scr ram " \
|
|
"$scriptaddr $script_size_f && " \
|
|
"thordown " #instance " ram " #instance " && " \
|
|
"echo THOR" #instance ": Trying to boot script at ${scriptaddr} && " \
|
|
"source ${scriptaddr}; " \
|
|
"echo THOR" #instance ": SCRIPT FAILED: continuing...;\0"
|
|
|
|
#define BOOTENV_DEV_NAME_USB_THOR(devtypeu, devtypel, instance) \
|
|
""
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
BOOT_TARGET_DEVICES_JTAG(func) \
|
|
BOOT_TARGET_DEVICES_MMC(func) \
|
|
BOOT_TARGET_DEVICES_QSPI(func) \
|
|
BOOT_TARGET_DEVICES_NAND(func) \
|
|
BOOT_TARGET_DEVICES_USB_DFU(func) \
|
|
BOOT_TARGET_DEVICES_USB_THOR(func) \
|
|
BOOT_TARGET_DEVICES_USB(func) \
|
|
BOOT_TARGET_DEVICES_SCSI(func) \
|
|
BOOT_TARGET_DEVICES_PXE(func) \
|
|
BOOT_TARGET_DEVICES_DHCP(func)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
/* Initial environment variables */
|
|
#ifndef CONFIG_EXTRA_ENV_SETTINGS
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
ENV_MEM_LAYOUT_SETTINGS \
|
|
BOOTENV
|
|
#endif
|
|
|
|
/* SPL can't handle all huge variables - define just DFU */
|
|
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
|
|
#undef CONFIG_EXTRA_ENV_SETTINGS
|
|
# define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
|
|
"atf-uboot.ub ram 0x10000000 0x1000000;" \
|
|
"Image ram 0x80000 0x3f80000;" \
|
|
"system.dtb ram 0x4000000 0x100000\0" \
|
|
"dfu_bufsiz=0x1000\0"
|
|
#endif
|
|
|
|
#define CONFIG_SPL_STACK 0xfffffffc
|
|
#define CONFIG_SPL_MAX_SIZE 0x40000
|
|
|
|
/* Just random location in OCM */
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x0
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
|
|
|
|
#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
|
|
# define CONFIG_SYS_SPI_KERNEL_OFFS 0x80000
|
|
# define CONFIG_SYS_SPI_ARGS_OFFS 0xa0000
|
|
# define CONFIG_SYS_SPI_ARGS_SIZE 0xa0000
|
|
#endif
|
|
|
|
/* u-boot is like dtb */
|
|
#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin"
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000
|
|
|
|
/* ATF is my kernel image */
|
|
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub"
|
|
|
|
/* MMC support */
|
|
#ifdef CONFIG_MMC_SDHCI_ZYNQ
|
|
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
|
|
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */
|
|
# if defined(CONFIG_SPL_LOAD_FIT)
|
|
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb"
|
|
# else
|
|
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
|
|
# endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
|
|
# define CONFIG_SPL_HASH
|
|
# define CONFIG_ENV_MAX_ENTRIES 10
|
|
#endif
|
|
|
|
#define CONFIG_SYS_SPL_MALLOC_START 0x20000000
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x1000000
|
|
|
|
#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
|
|
# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
|
|
#endif
|
|
|
|
#endif /* __XILINX_ZYNQMP_H */
|