u-boot/board/mikrotik/crs3xx-98dx3236/README
Luka Kovacic df9ebbe17e arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236
Convert the CRS305-1G-4S board to CRS3xx-98DX3236 to enable easier
implementation of new CRS3xx series boards, based on Marvell Prestera
98DX3236.

Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
2020-05-27 07:03:17 +02:00

23 lines
753 B
Text

MikroTik CRS3XX-98DX3236
========================
CRS3XX-98DX3236 is a U-Boot port that supports a series of MikroTik switches
based on the Marvell Prestera 98DX3236 switch with an integrated CPU.
Common specifications:
- Marvell Prestera 98DX3236 switch with an integrated ARMv7 CPU
- 512 MB DDR3 RAM
- UART @ 115200bps
- 16 MB SPI flash (Winbond 25Q128JVSM)
Currently supported hardware:
- UART boot (using kwboot) and console
- SPI boot, environment and load kernel
Planned:
- Gigabit Ethernet support (internal CPU <-> switch fabric connection)
Getting binary.0
================
binary.0 (DDR3 init phase) can be retrieved/extracted from the integrated bootloader on the SPI flash.
Then binary.0 can be replaced with the extracted blob.