mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
c95b19acac
The zynq_sdhci drivers depends on DM_MMC in Kconfig so no need to check for DM_MMC in the driver so this patch removes it. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
308 lines
7.1 KiB
C
308 lines
7.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2013 - 2015 Xilinx, Inc.
|
|
*
|
|
* Xilinx Zynq SD Host Controller Interface
|
|
*/
|
|
|
|
#include <clk.h>
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
#include "mmc_private.h"
|
|
#include <linux/libfdt.h>
|
|
#include <malloc.h>
|
|
#include <sdhci.h>
|
|
#include <zynqmp_tap_delay.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct arasan_sdhci_plat {
|
|
struct mmc_config cfg;
|
|
struct mmc mmc;
|
|
unsigned int f_max;
|
|
};
|
|
|
|
struct arasan_sdhci_priv {
|
|
struct sdhci_host *host;
|
|
u8 deviceid;
|
|
u8 bank;
|
|
u8 no_1p8;
|
|
};
|
|
|
|
#if defined(CONFIG_ARCH_ZYNQMP)
|
|
#define MMC_HS200_BUS_SPEED 5
|
|
|
|
static const u8 mode2timing[] = {
|
|
[MMC_LEGACY] = UHS_SDR12_BUS_SPEED,
|
|
[SD_LEGACY] = UHS_SDR12_BUS_SPEED,
|
|
[MMC_HS] = HIGH_SPEED_BUS_SPEED,
|
|
[SD_HS] = HIGH_SPEED_BUS_SPEED,
|
|
[MMC_HS_52] = HIGH_SPEED_BUS_SPEED,
|
|
[MMC_DDR_52] = HIGH_SPEED_BUS_SPEED,
|
|
[UHS_SDR12] = UHS_SDR12_BUS_SPEED,
|
|
[UHS_SDR25] = UHS_SDR25_BUS_SPEED,
|
|
[UHS_SDR50] = UHS_SDR50_BUS_SPEED,
|
|
[UHS_DDR50] = UHS_DDR50_BUS_SPEED,
|
|
[UHS_SDR104] = UHS_SDR104_BUS_SPEED,
|
|
[MMC_HS_200] = MMC_HS200_BUS_SPEED,
|
|
};
|
|
|
|
#define SDHCI_TUNING_LOOP_COUNT 40
|
|
|
|
static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid)
|
|
{
|
|
u16 clk;
|
|
unsigned long timeout;
|
|
|
|
clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
|
|
clk &= ~(SDHCI_CLOCK_CARD_EN);
|
|
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
|
|
|
|
/* Issue DLL Reset */
|
|
zynqmp_dll_reset(deviceid);
|
|
|
|
/* Wait max 20 ms */
|
|
timeout = 100;
|
|
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
|
|
& SDHCI_CLOCK_INT_STABLE)) {
|
|
if (timeout == 0) {
|
|
dev_err(mmc_dev(host->mmc),
|
|
": Internal clock never stabilised.\n");
|
|
return;
|
|
}
|
|
timeout--;
|
|
udelay(1000);
|
|
}
|
|
|
|
clk |= SDHCI_CLOCK_CARD_EN;
|
|
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
|
|
}
|
|
|
|
static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
|
|
{
|
|
struct mmc_cmd cmd;
|
|
struct mmc_data data;
|
|
u32 ctrl;
|
|
struct sdhci_host *host;
|
|
struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev);
|
|
char tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT;
|
|
u8 deviceid;
|
|
|
|
debug("%s\n", __func__);
|
|
|
|
host = priv->host;
|
|
deviceid = priv->deviceid;
|
|
|
|
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
|
|
ctrl |= SDHCI_CTRL_EXEC_TUNING;
|
|
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
|
|
|
|
mdelay(1);
|
|
|
|
arasan_zynqmp_dll_reset(host, deviceid);
|
|
|
|
sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
|
|
sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);
|
|
|
|
do {
|
|
cmd.cmdidx = opcode;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
cmd.cmdarg = 0;
|
|
|
|
data.blocksize = 64;
|
|
data.blocks = 1;
|
|
data.flags = MMC_DATA_READ;
|
|
|
|
if (tuning_loop_counter-- == 0)
|
|
break;
|
|
|
|
if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200 &&
|
|
mmc->bus_width == 8)
|
|
data.blocksize = 128;
|
|
|
|
sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
|
|
data.blocksize),
|
|
SDHCI_BLOCK_SIZE);
|
|
sdhci_writew(host, data.blocks, SDHCI_BLOCK_COUNT);
|
|
sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
|
|
|
|
mmc_send_cmd(mmc, &cmd, NULL);
|
|
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
|
|
|
|
if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK)
|
|
udelay(1);
|
|
|
|
} while (ctrl & SDHCI_CTRL_EXEC_TUNING);
|
|
|
|
if (tuning_loop_counter < 0) {
|
|
ctrl &= ~SDHCI_CTRL_TUNED_CLK;
|
|
sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL2);
|
|
}
|
|
|
|
if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
|
|
printf("%s:Tuning failed\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
udelay(1);
|
|
arasan_zynqmp_dll_reset(host, deviceid);
|
|
|
|
/* Enable only interrupts served by the SD controller */
|
|
sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK,
|
|
SDHCI_INT_ENABLE);
|
|
/* Mask all sdhci interrupt sources */
|
|
sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void arasan_sdhci_set_tapdelay(struct sdhci_host *host)
|
|
{
|
|
struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
|
|
struct mmc *mmc = (struct mmc *)host->mmc;
|
|
u8 uhsmode;
|
|
|
|
uhsmode = mode2timing[mmc->selected_mode];
|
|
|
|
if (uhsmode >= UHS_SDR25_BUS_SPEED)
|
|
arasan_zynqmp_set_tapdelay(priv->deviceid, uhsmode,
|
|
priv->bank);
|
|
}
|
|
|
|
static void arasan_sdhci_set_control_reg(struct sdhci_host *host)
|
|
{
|
|
struct mmc *mmc = (struct mmc *)host->mmc;
|
|
u32 reg;
|
|
|
|
if (!IS_SD(mmc))
|
|
return;
|
|
|
|
if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
|
|
reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
|
|
reg |= SDHCI_CTRL_VDD_180;
|
|
sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
|
|
}
|
|
|
|
if (mmc->selected_mode > SD_HS &&
|
|
mmc->selected_mode <= UHS_DDR50)
|
|
sdhci_set_uhs_timing(host);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_ARCH_ZYNQMP)
|
|
const struct sdhci_ops arasan_ops = {
|
|
.platform_execute_tuning = &arasan_sdhci_execute_tuning,
|
|
.set_delay = &arasan_sdhci_set_tapdelay,
|
|
.set_control_reg = &arasan_sdhci_set_control_reg,
|
|
};
|
|
#endif
|
|
|
|
static int arasan_sdhci_probe(struct udevice *dev)
|
|
{
|
|
struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
|
|
struct arasan_sdhci_priv *priv = dev_get_priv(dev);
|
|
struct sdhci_host *host;
|
|
struct clk clk;
|
|
unsigned long clock;
|
|
int ret;
|
|
|
|
host = priv->host;
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to get clock\n");
|
|
return ret;
|
|
}
|
|
|
|
clock = clk_get_rate(&clk);
|
|
if (IS_ERR_VALUE(clock)) {
|
|
dev_err(dev, "failed to get rate\n");
|
|
return clock;
|
|
}
|
|
|
|
debug("%s: CLK %ld\n", __func__, clock);
|
|
|
|
ret = clk_enable(&clk);
|
|
if (ret && ret != -ENOSYS) {
|
|
dev_err(dev, "failed to enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
|
|
SDHCI_QUIRK_BROKEN_R1B;
|
|
|
|
#ifdef CONFIG_ZYNQ_HISPD_BROKEN
|
|
host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE;
|
|
#endif
|
|
|
|
if (priv->no_1p8)
|
|
host->quirks |= SDHCI_QUIRK_NO_1_8_V;
|
|
|
|
host->max_clk = clock;
|
|
|
|
host->mmc = &plat->mmc;
|
|
host->mmc->dev = dev;
|
|
host->mmc->priv = host;
|
|
|
|
ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max,
|
|
CONFIG_ZYNQ_SDHCI_MIN_FREQ);
|
|
if (ret)
|
|
return ret;
|
|
upriv->mmc = host->mmc;
|
|
|
|
return sdhci_probe(dev);
|
|
}
|
|
|
|
static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
|
|
struct arasan_sdhci_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->host = calloc(1, sizeof(struct sdhci_host));
|
|
if (!priv->host)
|
|
return -1;
|
|
|
|
priv->host->name = dev->name;
|
|
|
|
#if defined(CONFIG_ARCH_ZYNQMP)
|
|
priv->host->ops = &arasan_ops;
|
|
#endif
|
|
|
|
priv->host->ioaddr = (void *)dev_read_addr(dev);
|
|
if (IS_ERR(priv->host->ioaddr))
|
|
return PTR_ERR(priv->host->ioaddr);
|
|
|
|
priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1);
|
|
priv->bank = dev_read_u32_default(dev, "xlnx,mio_bank", -1);
|
|
priv->no_1p8 = dev_read_bool(dev, "no-1-8-v");
|
|
|
|
plat->f_max = dev_read_u32_default(dev, "max-frequency",
|
|
CONFIG_ZYNQ_SDHCI_MAX_FREQ);
|
|
return 0;
|
|
}
|
|
|
|
static int arasan_sdhci_bind(struct udevice *dev)
|
|
{
|
|
struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
|
|
|
|
return sdhci_bind(dev, &plat->mmc, &plat->cfg);
|
|
}
|
|
|
|
static const struct udevice_id arasan_sdhci_ids[] = {
|
|
{ .compatible = "arasan,sdhci-8.9a" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(arasan_sdhci_drv) = {
|
|
.name = "arasan_sdhci",
|
|
.id = UCLASS_MMC,
|
|
.of_match = arasan_sdhci_ids,
|
|
.ofdata_to_platdata = arasan_sdhci_ofdata_to_platdata,
|
|
.ops = &sdhci_ops,
|
|
.bind = arasan_sdhci_bind,
|
|
.probe = arasan_sdhci_probe,
|
|
.priv_auto_alloc_size = sizeof(struct arasan_sdhci_priv),
|
|
.platdata_auto_alloc_size = sizeof(struct arasan_sdhci_plat),
|
|
};
|