mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
3cb2849c76
Add code for configuring the MMC0CKCR/MMC1CKCR on Gen2 platforms. This allows the MMCIF driver to set higher clock rate if desired. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
324 lines
8.2 KiB
C
324 lines
8.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Renesas RCar Gen2 CPG MSSR driver
|
|
*
|
|
* Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com>
|
|
*
|
|
* Based on the following driver from Linux kernel:
|
|
* r8a7796 Clock Pulse Generator / Module Standby and Software Reset
|
|
*
|
|
* Copyright (C) 2016 Glider bvba
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk-uclass.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <dt-bindings/clock/renesas-cpg-mssr.h>
|
|
|
|
#include "renesas-cpg-mssr.h"
|
|
#include "rcar-gen2-cpg.h"
|
|
|
|
#define CPG_RST_MODEMR 0x0060
|
|
|
|
#define CPG_PLL0CR 0x00d8
|
|
#define CPG_SDCKCR 0x0074
|
|
|
|
struct clk_div_table {
|
|
u8 val;
|
|
u8 div;
|
|
};
|
|
|
|
/* SDHI divisors */
|
|
static const struct clk_div_table cpg_sdh_div_table[] = {
|
|
{ 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 },
|
|
{ 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 },
|
|
{ 8, 24 }, { 10, 36 }, { 11, 48 }, { 0, 0 },
|
|
};
|
|
|
|
static const struct clk_div_table cpg_sd01_div_table[] = {
|
|
{ 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 },
|
|
{ 8, 24 }, { 10, 36 }, { 11, 48 }, { 12, 10 },
|
|
{ 0, 0 },
|
|
};
|
|
|
|
static u8 gen2_clk_get_sdh_div(const struct clk_div_table *table, u8 val)
|
|
{
|
|
for (;;) {
|
|
if (!(*table).div)
|
|
return 0xff;
|
|
|
|
if ((*table).val == val)
|
|
return (*table).div;
|
|
|
|
table++;
|
|
}
|
|
}
|
|
|
|
static int gen2_clk_enable(struct clk *clk)
|
|
{
|
|
struct gen2_clk_priv *priv = dev_get_priv(clk->dev);
|
|
|
|
return renesas_clk_endisable(clk, priv->base, true);
|
|
}
|
|
|
|
static int gen2_clk_disable(struct clk *clk)
|
|
{
|
|
struct gen2_clk_priv *priv = dev_get_priv(clk->dev);
|
|
|
|
return renesas_clk_endisable(clk, priv->base, false);
|
|
}
|
|
|
|
static ulong gen2_clk_get_rate(struct clk *clk)
|
|
{
|
|
struct gen2_clk_priv *priv = dev_get_priv(clk->dev);
|
|
struct cpg_mssr_info *info = priv->info;
|
|
struct clk parent;
|
|
const struct cpg_core_clk *core;
|
|
const struct rcar_gen2_cpg_pll_config *pll_config =
|
|
priv->cpg_pll_config;
|
|
u32 value, mult, div, rate = 0;
|
|
int ret;
|
|
|
|
debug("%s[%i] Clock: id=%lu\n", __func__, __LINE__, clk->id);
|
|
|
|
ret = renesas_clk_get_parent(clk, info, &parent);
|
|
if (ret) {
|
|
printf("%s[%i] parent fail, ret=%i\n", __func__, __LINE__, ret);
|
|
return ret;
|
|
}
|
|
|
|
if (renesas_clk_is_mod(clk)) {
|
|
rate = gen2_clk_get_rate(&parent);
|
|
debug("%s[%i] MOD clk: parent=%lu => rate=%u\n",
|
|
__func__, __LINE__, parent.id, rate);
|
|
return rate;
|
|
}
|
|
|
|
ret = renesas_clk_get_core(clk, info, &core);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (core->type) {
|
|
case CLK_TYPE_IN:
|
|
if (core->id == info->clk_extal_id) {
|
|
rate = clk_get_rate(&priv->clk_extal);
|
|
debug("%s[%i] EXTAL clk: rate=%u\n",
|
|
__func__, __LINE__, rate);
|
|
return rate;
|
|
}
|
|
|
|
if (core->id == info->clk_extal_usb_id) {
|
|
rate = clk_get_rate(&priv->clk_extal_usb);
|
|
debug("%s[%i] EXTALR clk: rate=%u\n",
|
|
__func__, __LINE__, rate);
|
|
return rate;
|
|
}
|
|
|
|
return -EINVAL;
|
|
|
|
case CLK_TYPE_FF:
|
|
rate = (gen2_clk_get_rate(&parent) * core->mult) / core->div;
|
|
debug("%s[%i] FIXED clk: parent=%i mul=%i div=%i => rate=%u\n",
|
|
__func__, __LINE__,
|
|
core->parent, core->mult, core->div, rate);
|
|
return rate;
|
|
|
|
case CLK_TYPE_DIV6P1: /* DIV6 Clock with 1 parent clock */
|
|
value = (readl(priv->base + core->offset) & 0x3f) + 1;
|
|
rate = gen2_clk_get_rate(&parent) / value;
|
|
debug("%s[%i] DIV6P1 clk: parent=%i div=%i => rate=%u\n",
|
|
__func__, __LINE__,
|
|
core->parent, value, rate);
|
|
return rate;
|
|
|
|
case CLK_TYPE_GEN2_MAIN:
|
|
rate = gen2_clk_get_rate(&parent) / pll_config->extal_div;
|
|
debug("%s[%i] MAIN clk: parent=%i extal_div=%i => rate=%u\n",
|
|
__func__, __LINE__,
|
|
core->parent, pll_config->extal_div, rate);
|
|
return rate;
|
|
|
|
case CLK_TYPE_GEN2_PLL0:
|
|
/*
|
|
* PLL0 is a configurable multiplier clock except on R-Car
|
|
* V2H/E2. Register the PLL0 clock as a fixed factor clock for
|
|
* now as there's no generic multiplier clock implementation and
|
|
* we currently have no need to change the multiplier value.
|
|
*/
|
|
mult = pll_config->pll0_mult;
|
|
if (!mult) {
|
|
value = readl(priv->base + CPG_PLL0CR);
|
|
mult = (((value >> 24) & 0x7f) + 1) * 2;
|
|
}
|
|
|
|
rate = (gen2_clk_get_rate(&parent) * mult) / info->pll0_div;
|
|
debug("%s[%i] PLL0 clk: parent=%i mult=%u => rate=%u\n",
|
|
__func__, __LINE__, core->parent, mult, rate);
|
|
return rate;
|
|
|
|
case CLK_TYPE_GEN2_PLL1:
|
|
rate = (gen2_clk_get_rate(&parent) * pll_config->pll1_mult) / 2;
|
|
debug("%s[%i] PLL1 clk: parent=%i mul=%i => rate=%u\n",
|
|
__func__, __LINE__,
|
|
core->parent, pll_config->pll1_mult, rate);
|
|
return rate;
|
|
|
|
case CLK_TYPE_GEN2_PLL3:
|
|
rate = gen2_clk_get_rate(&parent) * pll_config->pll3_mult;
|
|
debug("%s[%i] PLL3 clk: parent=%i mul=%i => rate=%u\n",
|
|
__func__, __LINE__,
|
|
core->parent, pll_config->pll3_mult, rate);
|
|
return rate;
|
|
|
|
case CLK_TYPE_GEN2_SDH:
|
|
value = (readl(priv->base + CPG_SDCKCR) >> 8) & 0xf;
|
|
div = gen2_clk_get_sdh_div(cpg_sdh_div_table, value);
|
|
rate = gen2_clk_get_rate(&parent) / div;
|
|
debug("%s[%i] SDH clk: parent=%i div=%i => rate=%u\n",
|
|
__func__, __LINE__,
|
|
core->parent, div, rate);
|
|
return rate;
|
|
|
|
case CLK_TYPE_GEN2_SD0:
|
|
value = (readl(priv->base + CPG_SDCKCR) >> 4) & 0xf;
|
|
div = gen2_clk_get_sdh_div(cpg_sd01_div_table, value);
|
|
rate = gen2_clk_get_rate(&parent) / div;
|
|
debug("%s[%i] SD0 clk: parent=%i div=%i => rate=%u\n",
|
|
__func__, __LINE__,
|
|
core->parent, div, rate);
|
|
return rate;
|
|
|
|
case CLK_TYPE_GEN2_SD1:
|
|
value = (readl(priv->base + CPG_SDCKCR) >> 0) & 0xf;
|
|
div = gen2_clk_get_sdh_div(cpg_sd01_div_table, value);
|
|
rate = gen2_clk_get_rate(&parent) / div;
|
|
debug("%s[%i] SD1 clk: parent=%i div=%i => rate=%u\n",
|
|
__func__, __LINE__,
|
|
core->parent, div, rate);
|
|
return rate;
|
|
}
|
|
|
|
printf("%s[%i] unknown fail\n", __func__, __LINE__);
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
static int gen2_clk_setup_mmcif_div(struct clk *clk, ulong rate)
|
|
{
|
|
struct gen2_clk_priv *priv = dev_get_priv(clk->dev);
|
|
struct cpg_mssr_info *info = priv->info;
|
|
const struct cpg_core_clk *core;
|
|
struct clk parent, pparent;
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = renesas_clk_get_parent(clk, info, &parent);
|
|
if (ret) {
|
|
debug("%s[%i] parent fail, ret=%i\n", __func__, __LINE__, ret);
|
|
return ret;
|
|
}
|
|
|
|
if (renesas_clk_is_mod(&parent))
|
|
return 0;
|
|
|
|
ret = renesas_clk_get_core(&parent, info, &core);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (strcmp(core->name, "mmc0") && strcmp(core->name, "mmc1"))
|
|
return 0;
|
|
|
|
ret = renesas_clk_get_parent(&parent, info, &pparent);
|
|
if (ret) {
|
|
debug("%s[%i] parent fail, ret=%i\n", __func__, __LINE__, ret);
|
|
return ret;
|
|
}
|
|
|
|
val = (gen2_clk_get_rate(&pparent) / rate) - 1;
|
|
|
|
debug("%s[%i] MMCIF offset=%x\n", __func__, __LINE__, core->offset);
|
|
|
|
writel(val, priv->base + core->offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ulong gen2_clk_set_rate(struct clk *clk, ulong rate)
|
|
{
|
|
/* Force correct MMC-IF divider configuration if applicable */
|
|
gen2_clk_setup_mmcif_div(clk, rate);
|
|
return gen2_clk_get_rate(clk);
|
|
}
|
|
|
|
static int gen2_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args)
|
|
{
|
|
if (args->args_count != 2) {
|
|
debug("Invaild args_count: %d\n", args->args_count);
|
|
return -EINVAL;
|
|
}
|
|
|
|
clk->id = (args->args[0] << 16) | args->args[1];
|
|
|
|
return 0;
|
|
}
|
|
|
|
const struct clk_ops gen2_clk_ops = {
|
|
.enable = gen2_clk_enable,
|
|
.disable = gen2_clk_disable,
|
|
.get_rate = gen2_clk_get_rate,
|
|
.set_rate = gen2_clk_set_rate,
|
|
.of_xlate = gen2_clk_of_xlate,
|
|
};
|
|
|
|
int gen2_clk_probe(struct udevice *dev)
|
|
{
|
|
struct gen2_clk_priv *priv = dev_get_priv(dev);
|
|
struct cpg_mssr_info *info =
|
|
(struct cpg_mssr_info *)dev_get_driver_data(dev);
|
|
fdt_addr_t rst_base;
|
|
u32 cpg_mode;
|
|
int ret;
|
|
|
|
priv->base = (struct gen2_base *)devfdt_get_addr(dev);
|
|
if (!priv->base)
|
|
return -EINVAL;
|
|
|
|
priv->info = info;
|
|
ret = fdt_node_offset_by_compatible(gd->fdt_blob, -1, info->reset_node);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
rst_base = fdtdec_get_addr(gd->fdt_blob, ret, "reg");
|
|
if (rst_base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
cpg_mode = readl(rst_base + CPG_RST_MODEMR);
|
|
|
|
priv->cpg_pll_config =
|
|
(struct rcar_gen2_cpg_pll_config *)info->get_pll_config(cpg_mode);
|
|
if (!priv->cpg_pll_config->extal_div)
|
|
return -EINVAL;
|
|
|
|
ret = clk_get_by_name(dev, "extal", &priv->clk_extal);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (info->extal_usb_node) {
|
|
ret = clk_get_by_name(dev, info->extal_usb_node,
|
|
&priv->clk_extal_usb);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int gen2_clk_remove(struct udevice *dev)
|
|
{
|
|
struct gen2_clk_priv *priv = dev_get_priv(dev);
|
|
|
|
return renesas_clk_remove(priv->base, priv->info);
|
|
}
|