mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-28 14:03:44 +00:00
1b387ef55c
The SPDX License List version 1.19 now contains an official entry for the IBM-pibs license. However, instead of our suggestion "ibm-pibs", the SPDX License List uses "IBM-pibs", with the following rationale: "The reason being that all other SPDX License List short identifiers tend towards using capital letters unless spelling a word. I'd prefer to be consistent to this end". Change the license IDs to use the official name. Signed-off-by: Wolfgang Denk <wd@denx.de>
268 lines
7.1 KiB
C
268 lines
7.1 KiB
C
/*
|
|
* (C) Copyright 2000-2006
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2010
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0 IBM-pibs
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <commproc.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <watchdog.h>
|
|
#include <asm/ppc4xx.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_405GP) || \
|
|
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
|
|
defined(CONFIG_405EX) || defined(CONFIG_440)
|
|
|
|
#if defined(CONFIG_440)
|
|
|
|
#if defined(CONFIG_440GP)
|
|
#define CR0_MASK 0x3fff0000
|
|
#define CR0_EXTCLK_ENA 0x00600000
|
|
#define CR0_UDIV_POS 16
|
|
#define UDIV_SUBTRACT 1
|
|
#define UART0_SDR CPC0_CR0
|
|
#define MFREG(a, d) d = mfdcr(a)
|
|
#define MTREG(a, d) mtdcr(a, d)
|
|
#else /* #if defined(CONFIG_440GP) */
|
|
/* all other 440 PPC's access clock divider via sdr register */
|
|
#define CR0_MASK 0xdfffffff
|
|
#define CR0_EXTCLK_ENA 0x00800000
|
|
#define CR0_UDIV_POS 0
|
|
#define UDIV_SUBTRACT 0
|
|
#define UART0_SDR SDR0_UART0
|
|
#define UART1_SDR SDR0_UART1
|
|
#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
|
|
defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
|
|
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
|
|
defined(CONFIG_460EX) || defined(CONFIG_460GT)
|
|
#define UART2_SDR SDR0_UART2
|
|
#endif
|
|
#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
|
|
defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
|
|
defined(CONFIG_460EX) || defined(CONFIG_460GT)
|
|
#define UART3_SDR SDR0_UART3
|
|
#endif
|
|
#define MFREG(a, d) mfsdr(a, d)
|
|
#define MTREG(a, d) mtsdr(a, d)
|
|
#endif /* #if defined(CONFIG_440GP) */
|
|
#elif defined(CONFIG_405EP) || defined(CONFIG_405EZ)
|
|
#define UCR0_MASK 0x0000007f
|
|
#define UCR1_MASK 0x00007f00
|
|
#define UCR0_UDIV_POS 0
|
|
#define UCR1_UDIV_POS 8
|
|
#define UDIV_MAX 127
|
|
#elif defined(CONFIG_405EX)
|
|
#define MFREG(a, d) mfsdr(a, d)
|
|
#define MTREG(a, d) mtsdr(a, d)
|
|
#define CR0_MASK 0x000000ff
|
|
#define CR0_EXTCLK_ENA 0x00800000
|
|
#define CR0_UDIV_POS 0
|
|
#define UDIV_SUBTRACT 0
|
|
#define UART0_SDR SDR0_UART0
|
|
#define UART1_SDR SDR0_UART1
|
|
#else /* CONFIG_405GP */
|
|
#define CR0_MASK 0x00001fff
|
|
#define CR0_EXTCLK_ENA 0x000000c0
|
|
#define CR0_UDIV_POS 1
|
|
#define UDIV_MAX 32
|
|
#endif
|
|
|
|
#if defined(CONFIG_405EP) && defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
|
|
#error "External serial clock not supported on AMCC PPC405EP!"
|
|
#endif
|
|
|
|
#if (defined(CONFIG_405EX) || defined(CONFIG_405EZ) || \
|
|
defined(CONFIG_440)) && !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
|
|
/*
|
|
* For some SoC's, the cpu clock is on divider chain A, UART on
|
|
* divider chain B ... so cpu clock is irrelevant. Get the
|
|
* "optimized" values that are subject to the 1/2 opb clock
|
|
* constraint.
|
|
*/
|
|
static u16 serial_bdiv(int baudrate, u32 *udiv)
|
|
{
|
|
sys_info_t sysinfo;
|
|
u32 div; /* total divisor udiv * bdiv */
|
|
u32 umin; /* minimum udiv */
|
|
u16 diff; /* smallest diff */
|
|
u16 idiff; /* current diff */
|
|
u16 ibdiv; /* current bdiv */
|
|
u32 i;
|
|
u32 est; /* current estimate */
|
|
u32 max;
|
|
#if defined(CONFIG_405EZ)
|
|
u32 cpr_pllc;
|
|
u32 plloutb;
|
|
u32 reg;
|
|
#endif
|
|
|
|
get_sys_info(&sysinfo);
|
|
|
|
#if defined(CONFIG_405EZ)
|
|
/* check the pll feedback source */
|
|
mfcpr(CPR0_PLLC, cpr_pllc);
|
|
plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
|
|
sysinfo.pllFwdDivB : sysinfo.pllFwdDiv) *
|
|
sysinfo.pllFbkDiv) / sysinfo.pllFwdDivB);
|
|
div = plloutb / (16 * baudrate); /* total divisor */
|
|
umin = (plloutb / get_OPB_freq()) << 1; /* 2 x OPB divisor */
|
|
max = 256; /* highest possible */
|
|
#else /* 405EZ */
|
|
div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */
|
|
umin = sysinfo.pllOpbDiv << 1; /* 2 x OPB divisor */
|
|
max = 32; /* highest possible */
|
|
#endif /* 405EZ */
|
|
|
|
*udiv = diff = max;
|
|
|
|
/*
|
|
* i is the test udiv value -- start with the largest
|
|
* possible (max) to minimize serial clock and constrain
|
|
* search to umin.
|
|
*/
|
|
for (i = max; i > umin; i--) {
|
|
ibdiv = div / i;
|
|
est = i * ibdiv;
|
|
idiff = (est > div) ? (est - div) : (div - est);
|
|
if (idiff == 0) {
|
|
*udiv = i;
|
|
break; /* can't do better */
|
|
} else if (idiff < diff) {
|
|
*udiv = i; /* best so far */
|
|
diff = idiff; /* update lowest diff*/
|
|
}
|
|
}
|
|
|
|
#if defined(CONFIG_405EZ)
|
|
mfcpr(CPR0_PERD0, reg);
|
|
reg &= ~0x0000ffff;
|
|
reg |= ((*udiv - 0) << 8) | (*udiv - 0);
|
|
mtcpr(CPR0_PERD0, reg);
|
|
#endif
|
|
|
|
return div / *udiv;
|
|
}
|
|
#endif /* #if (defined(CONFIG_405EP) ... */
|
|
|
|
/*
|
|
* This function returns the UART clock used by the common
|
|
* NS16550 driver. Additionally the SoC internal divisors for
|
|
* optimal UART baudrate are configured.
|
|
*/
|
|
int get_serial_clock(void)
|
|
{
|
|
u32 clk;
|
|
u32 udiv;
|
|
#if !defined(CONFIG_405EZ)
|
|
u32 reg;
|
|
#endif
|
|
#if !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
|
|
PPC4xx_SYS_INFO sys_info;
|
|
#endif
|
|
|
|
/*
|
|
* Programming of the internal divisors is SoC specific.
|
|
* Let's handle this in some #ifdef's for the SoC's.
|
|
*/
|
|
|
|
#if defined(CONFIG_405GP)
|
|
reg = mfdcr(CPC0_CR0) & ~CR0_MASK;
|
|
#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
|
|
clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
|
|
udiv = 1;
|
|
reg |= CR0_EXTCLK_ENA;
|
|
#else /* CONFIG_SYS_EXT_SERIAL_CLOCK */
|
|
clk = gd->cpu_clk;
|
|
#ifdef CONFIG_SYS_405_UART_ERRATA_59
|
|
udiv = 31; /* Errata 59: stuck at 31 */
|
|
#else /* CONFIG_SYS_405_UART_ERRATA_59 */
|
|
{
|
|
u32 tmp = CONFIG_SYS_BASE_BAUD * 16;
|
|
|
|
udiv = (clk + tmp / 2) / tmp;
|
|
}
|
|
if (udiv > UDIV_MAX) /* max. n bits for udiv */
|
|
udiv = UDIV_MAX;
|
|
#endif /* CONFIG_SYS_405_UART_ERRATA_59 */
|
|
#endif /* CONFIG_SYS_EXT_SERIAL_CLOCK */
|
|
reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
|
|
mtdcr (CPC0_CR0, reg);
|
|
#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
|
|
clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
|
|
#else
|
|
clk = CONFIG_SYS_BASE_BAUD * 16;
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_405EP)
|
|
{
|
|
u32 tmp = CONFIG_SYS_BASE_BAUD * 16;
|
|
|
|
reg = mfdcr(CPC0_UCR) & ~(UCR0_MASK | UCR1_MASK);
|
|
clk = gd->cpu_clk;
|
|
udiv = (clk + tmp / 2) / tmp;
|
|
if (udiv > UDIV_MAX) /* max. n bits for udiv */
|
|
udiv = UDIV_MAX;
|
|
}
|
|
reg |= udiv << UCR0_UDIV_POS; /* set the UART divisor */
|
|
reg |= udiv << UCR1_UDIV_POS; /* set the UART divisor */
|
|
mtdcr(CPC0_UCR, reg);
|
|
clk = CONFIG_SYS_BASE_BAUD * 16;
|
|
#endif /* CONFIG_405EP */
|
|
|
|
#if defined(CONFIG_405EX) || defined(CONFIG_440)
|
|
MFREG(UART0_SDR, reg);
|
|
reg &= ~CR0_MASK;
|
|
|
|
#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
|
|
reg |= CR0_EXTCLK_ENA;
|
|
udiv = 1;
|
|
clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
|
|
#else /* CONFIG_SYS_EXT_SERIAL_CLOCK */
|
|
clk = gd->baudrate * serial_bdiv(gd->baudrate, &udiv) * 16;
|
|
#endif /* CONFIG_SYS_EXT_SERIAL_CLOCK */
|
|
|
|
reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
|
|
|
|
/*
|
|
* Configure input clock to baudrate generator for all
|
|
* available serial ports here
|
|
*/
|
|
MTREG(UART0_SDR, reg);
|
|
#if defined(UART1_SDR)
|
|
MTREG(UART1_SDR, reg);
|
|
#endif
|
|
#if defined(UART2_SDR)
|
|
MTREG(UART2_SDR, reg);
|
|
#endif
|
|
#if defined(UART3_SDR)
|
|
MTREG(UART3_SDR, reg);
|
|
#endif
|
|
#endif /* CONFIG_405EX ... */
|
|
|
|
#if defined(CONFIG_405EZ)
|
|
clk = gd->baudrate * serial_bdiv(gd->baudrate, &udiv) * 16;
|
|
#endif /* CONFIG_405EZ */
|
|
|
|
/*
|
|
* Correct UART frequency in bd-info struct now that
|
|
* the UART divisor is available
|
|
*/
|
|
#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
|
|
gd->arch.uart_clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
|
|
#else
|
|
get_sys_info(&sys_info);
|
|
gd->arch.uart_clk = sys_info.freqUART / udiv;
|
|
#endif
|
|
|
|
return clk;
|
|
}
|
|
#endif /* CONFIG_405GP */
|