mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
26671aabcc
Fixed the following DTC build warning (reproducible with W=1) arch/arm/dts/at91-sama5d2_icp.dtb: Warning (unit_address_format): /ahb/ohci@00400000: unit name should not have leading 0s arch/arm/dts/at91-sama5d2_icp.dtb: Warning (unit_address_format): /ahb/ehci@00500000: unit name should not have leading 0s Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Alexander Dahl <ada@thorsis.com>
297 lines
6.7 KiB
Text
297 lines
6.7 KiB
Text
/dts-v1/;
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "sama5d2.dtsi"
|
|
#include "sama5d2-pinfunc.h"
|
|
|
|
/ {
|
|
model = "Atmel SAMA5D2 Xplained";
|
|
compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
|
|
|
|
chosen {
|
|
u-boot,dm-pre-reloc;
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
memory {
|
|
reg = <0x20000000 0x20000000>;
|
|
};
|
|
|
|
onewire_tm: onewire {
|
|
gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_onewire_tm_default>;
|
|
status = "okay";
|
|
|
|
w1_eeprom: w1_eeprom@0 {
|
|
compatible = "maxim,ds24b33";
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
ahb {
|
|
usb1: ohci@400000 {
|
|
num-ports = <3>;
|
|
atmel,vbus-gpio = <&pioA 42 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb_default>;
|
|
status = "okay";
|
|
};
|
|
|
|
usb2: ehci@500000 {
|
|
status = "okay";
|
|
};
|
|
|
|
sdmmc0: sdio-host@a0000000 {
|
|
bus-width = <8>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sdmmc0_cmd_dat_default &pinctrl_sdmmc0_ck_cd_default>;
|
|
status = "okay";
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
sdmmc1: sdio-host@b0000000 {
|
|
bus-width = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sdmmc1_cmd_dat_default &pinctrl_sdmmc1_ck_cd_default>;
|
|
status = "okay"; /* conflict with qspi0 */
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
apb {
|
|
hlcdc: hlcdc@f0000000 {
|
|
atmel,vl-bpix = <4>;
|
|
atmel,guard-time = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
|
|
status = "okay";
|
|
u-boot,dm-pre-reloc;
|
|
|
|
display-timings {
|
|
u-boot,dm-pre-reloc;
|
|
480x272 {
|
|
clock-frequency = <9000000>;
|
|
hactive = <480>;
|
|
vactive = <272>;
|
|
hsync-len = <41>;
|
|
hfront-porch = <2>;
|
|
hback-porch = <2>;
|
|
vfront-porch = <2>;
|
|
vback-porch = <2>;
|
|
vsync-len = <11>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
};
|
|
};
|
|
|
|
qspi0: spi@f0020000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_qspi0_sck_cs_default &pinctrl_qspi0_dat_default>;
|
|
status = "okay";
|
|
u-boot,dm-pre-reloc;
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <83000000>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-tx-bus-width = <4>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
};
|
|
|
|
spi0: spi@f8000000 {
|
|
cs-gpios = <&pioA 17 0>, <0>, <0>, <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi0_default>;
|
|
status = "okay";
|
|
u-boot,dm-pre-reloc;
|
|
|
|
spi_flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <50000000>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
};
|
|
|
|
macb0: ethernet@f8008000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
|
|
phy-mode = "rmii";
|
|
status = "okay";
|
|
|
|
ethernet-phy@1 {
|
|
reg = <0x1>;
|
|
};
|
|
};
|
|
|
|
uart1: serial@f8020000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1_default>;
|
|
status = "okay";
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
i2c1: i2c@fc028000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1_default>;
|
|
status = "okay";
|
|
|
|
i2c_eeprom: i2c_eeprom@5c {
|
|
compatible = "atmel,24mac402";
|
|
reg = <0x5c>;
|
|
};
|
|
};
|
|
|
|
pioA: gpio@fc038000 {
|
|
pinctrl {
|
|
pinctrl_i2c1_default: i2c1_default {
|
|
pinmux = <PIN_PD4__TWD1>,
|
|
<PIN_PD5__TWCK1>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_lcd_base: pinctrl_lcd_base {
|
|
pinmux = <PIN_PC30__LCDVSYNC>,
|
|
<PIN_PC31__LCDHSYNC>,
|
|
<PIN_PD1__LCDDEN>,
|
|
<PIN_PD0__LCDPCK>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_lcd_pwm: pinctrl_lcd_pwm {
|
|
pinmux = <PIN_PC28__LCDPWM>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_lcd_rgb666: pinctrl_lcd_rgb666 {
|
|
pinmux = <PIN_PC10__LCDDAT2>,
|
|
<PIN_PC11__LCDDAT3>,
|
|
<PIN_PC12__LCDDAT4>,
|
|
<PIN_PC13__LCDDAT5>,
|
|
<PIN_PC14__LCDDAT6>,
|
|
<PIN_PC15__LCDDAT7>,
|
|
<PIN_PC16__LCDDAT10>,
|
|
<PIN_PC17__LCDDAT11>,
|
|
<PIN_PC18__LCDDAT12>,
|
|
<PIN_PC19__LCDDAT13>,
|
|
<PIN_PC20__LCDDAT14>,
|
|
<PIN_PC21__LCDDAT15>,
|
|
<PIN_PC22__LCDDAT18>,
|
|
<PIN_PC23__LCDDAT19>,
|
|
<PIN_PC24__LCDDAT20>,
|
|
<PIN_PC25__LCDDAT21>,
|
|
<PIN_PC26__LCDDAT22>,
|
|
<PIN_PC27__LCDDAT23>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_macb0_phy_irq: macb0_phy_irq {
|
|
pinmux = <PIN_PC9__GPIO>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_macb0_rmii: macb0_rmii {
|
|
pinmux = <PIN_PB14__GTXCK>,
|
|
<PIN_PB15__GTXEN>,
|
|
<PIN_PB16__GRXDV>,
|
|
<PIN_PB17__GRXER>,
|
|
<PIN_PB18__GRX0>,
|
|
<PIN_PB19__GRX1>,
|
|
<PIN_PB20__GTX0>,
|
|
<PIN_PB21__GTX1>,
|
|
<PIN_PB22__GMDC>,
|
|
<PIN_PB23__GMDIO>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_qspi0_sck_cs_default: qspi0_sck_cs_default {
|
|
pinmux = <PIN_PA22__QSPI0_SCK>,
|
|
<PIN_PA23__QSPI0_CS>;
|
|
bias-disable;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
pinctrl_qspi0_dat_default: qspi0_dat_default {
|
|
pinmux = <PIN_PA24__QSPI0_IO0>,
|
|
<PIN_PA25__QSPI0_IO1>,
|
|
<PIN_PA26__QSPI0_IO2>,
|
|
<PIN_PA27__QSPI0_IO3>;
|
|
bias-pull-up;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
pinctrl_sdmmc0_cmd_dat_default: sdmmc0_cmd_dat_default {
|
|
pinmux = <PIN_PA1__SDMMC0_CMD>,
|
|
<PIN_PA2__SDMMC0_DAT0>,
|
|
<PIN_PA3__SDMMC0_DAT1>,
|
|
<PIN_PA4__SDMMC0_DAT2>,
|
|
<PIN_PA5__SDMMC0_DAT3>,
|
|
<PIN_PA6__SDMMC0_DAT4>,
|
|
<PIN_PA7__SDMMC0_DAT5>,
|
|
<PIN_PA8__SDMMC0_DAT6>,
|
|
<PIN_PA9__SDMMC0_DAT7>;
|
|
bias-pull-up;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
pinctrl_sdmmc0_ck_cd_default: sdmmc0_ck_cd_default {
|
|
pinmux = <PIN_PA0__SDMMC0_CK>,
|
|
<PIN_PA10__SDMMC0_RSTN>,
|
|
<PIN_PA11__SDMMC0_VDDSEL>,
|
|
<PIN_PA13__SDMMC0_CD>;
|
|
bias-disable;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
pinctrl_sdmmc1_cmd_dat_default: sdmmc1_cmd_dat_default {
|
|
pinmux = <PIN_PA28__SDMMC1_CMD>,
|
|
<PIN_PA18__SDMMC1_DAT0>,
|
|
<PIN_PA19__SDMMC1_DAT1>,
|
|
<PIN_PA20__SDMMC1_DAT2>,
|
|
<PIN_PA21__SDMMC1_DAT3>;
|
|
bias-pull-up;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
pinctrl_sdmmc1_ck_cd_default: sdmmc1_ck_cd_default {
|
|
pinmux = <PIN_PA22__SDMMC1_CK>,
|
|
<PIN_PA30__SDMMC1_CD>;
|
|
bias-disable;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
pinctrl_spi0_default: spi0_default {
|
|
pinmux = <PIN_PA14__SPI0_SPCK>,
|
|
<PIN_PA15__SPI0_MOSI>,
|
|
<PIN_PA16__SPI0_MISO>;
|
|
bias-disable;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
pinctrl_uart1_default: uart1_default {
|
|
pinmux = <PIN_PD2__URXD1>,
|
|
<PIN_PD3__UTXD1>;
|
|
bias-disable;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
pinctrl_usb_default: usb_default {
|
|
pinmux = <PIN_PB10__GPIO>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_usba_vbus: usba_vbus {
|
|
pinmux = <PIN_PA31__GPIO>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_onewire_tm_default: onewire_tm_default {
|
|
pinmux = <PIN_PB0__GPIO>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|