u-boot/arch/arm
Breno Lima 68b09b8913 Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS"
Commit c1ebf54868 ("imx_common: Return MMCSD_MODE_FS in spl_boot_mode()
also for EXTFS") causes SPL breakage on wandboard:

ERROR: v7_dcache_inval_range - start address is not aligned - 0x1820006c
ERROR: v7_dcache_inval_range - stop address is not aligned - 0x1820086c
ERROR: v7_dcache_inval_range - start address is not aligned - 0x1820006c
ERROR: v7_dcache_inval_range - stop address is not aligned - 0x1820086c
** First descriptor is NOT a primary desc on 0:1 **
spl: no partition table found
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error is seen when SPL and u-boot.img are stored in the raw SD card
partition.

This reverts commit c1ebf54868.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-21 10:44:20 +02:00
..
cpu mx6: clock: Fix the logic for reading axi_alt_sel 2016-07-20 18:26:37 +02:00
dts video: tegra: Move to using simple-panel and pwm-backlight 2016-07-05 13:19:08 -07:00
imx-common Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS" 2016-07-21 10:44:20 +02:00
include Revert "arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite" 2016-07-20 09:31:23 +02:00
lib ARM: move #ifdef to match the error handling code 2016-06-24 17:23:13 -04:00
mach-at91 arm: at91: taurus/axm: add DM and DTS support 2016-06-26 20:17:22 +02:00
mach-bcm283x rpi: remove redundant board files 2016-04-11 20:48:23 -04:00
mach-davinci common: Pass the boot device into spl_boot_mode() 2016-06-26 20:17:22 +02:00
mach-exynos ARM: exynos: Fix build error if SERIAL is disabled in SPL 2016-05-26 12:55:49 +09:00
mach-highbank ARM: highbank: move SoC sources to mach-highbank 2015-02-21 08:23:51 -05:00
mach-integrator integrator: switch to DM serial port 2015-08-12 20:47:49 -04:00
mach-keystone ARM: k2g: Configure reset mux to device reset 2016-06-02 21:42:19 -04:00
mach-kirkwood configs: Re-sync with cmd/Kconfig 2016-04-25 15:09:47 -04:00
mach-meson board: amlogic: Rename folder for Amlogic boards 2016-06-24 17:23:09 -04:00
mach-mvebu common: Pass the boot device into spl_boot_mode() 2016-06-26 20:17:22 +02:00
mach-orion5x Use correct spelling of "U-Boot" 2016-02-06 12:00:59 +01:00
mach-rockchip common: Pass the boot device into spl_boot_mode() 2016-06-26 20:17:22 +02:00
mach-s5pc1xx arm: s5pc1xx: move SoC to mach-s5pc1xx 2015-11-30 17:17:01 +09:00
mach-snapdragon clk: convert API to match reset/mailbox style 2016-06-19 17:05:55 -06:00
mach-socfpga common: Pass the boot device into spl_boot_mode() 2016-06-26 20:17:22 +02:00
mach-stm32 stm32: stm32f4: move flash driver to mtd driver location 2016-03-26 18:49:28 -04:00
mach-sunxi common: Pass the boot device into spl_boot_mode() 2016-06-26 20:17:22 +02:00
mach-tegra mailbox: add Tegra186 HSP driver 2016-06-19 17:05:55 -06:00
mach-uniphier ARM: uniphier: add external IRQ setup code 2016-07-02 05:44:30 +09:00
mach-versatile arm: Remove versatileab board 2015-09-11 15:01:25 -04:00
mach-zynq common: Pass the boot device into spl_boot_mode() 2016-06-26 20:17:22 +02:00
thumb1/include/asm/proc-armv arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
config.mk arm: clang: Update support slightly 2016-04-01 17:17:39 -04:00
Kconfig board/BuR: rename kwb board to brxre1 2016-06-24 17:24:40 -04:00
Kconfig.debug arm: debug: add Kconfig entries for lowlevel debug 2014-10-26 22:23:12 +01:00
Makefile arm: Treat arm946es as v5te 2016-06-02 21:21:34 -04:00