mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-10-27 08:23:45 +00:00
12fe7f7c2a
These boards all have the same GPIO arrangement, so add some common platform data that can be used by all boards. Remove the configs which are no longer required. Signed-off-by: Simon Glass <sjg@chromium.org>
245 lines
7.1 KiB
C
245 lines
7.1 KiB
C
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/at91sam9260_matrix.h>
|
|
#include <asm/arch/at91_common.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/at91sam9_sdramc.h>
|
|
#include <asm/arch/gpio.h>
|
|
|
|
/*
|
|
* if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
|
|
* peripheral pins. Good to have if hardware is soldered optionally
|
|
* or in case of SPI no slave is selected. Avoid lines to float
|
|
* needlessly. Use a short local PUP define.
|
|
*
|
|
* Due to errata "TXD floats when CTS is inactive" pullups are always
|
|
* on for TXD pins.
|
|
*/
|
|
#ifdef CONFIG_AT91_GPIO_PULLUP
|
|
# define PUP CONFIG_AT91_GPIO_PULLUP
|
|
#else
|
|
# define PUP 0
|
|
#endif
|
|
|
|
void at91_serial0_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD0 */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD0 */
|
|
writel(1 << ATMEL_ID_USART0, &pmc->pcer);
|
|
}
|
|
|
|
void at91_serial1_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTB, 6, 1); /* TXD1 */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 7, PUP); /* RXD1 */
|
|
writel(1 << ATMEL_ID_USART1, &pmc->pcer);
|
|
}
|
|
|
|
void at91_serial2_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTB, 8, 1); /* TXD2 */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 9, PUP); /* RXD2 */
|
|
writel(1 << ATMEL_ID_USART2, &pmc->pcer);
|
|
}
|
|
|
|
void at91_seriald_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* DRXD */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */
|
|
writel(1 << ATMEL_ID_SYS, &pmc->pcer);
|
|
}
|
|
|
|
#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
|
|
void at91_spi0_hw_init(unsigned long cs_mask)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */
|
|
|
|
/* Enable clock */
|
|
writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
|
|
|
|
if (cs_mask & (1 << 0)) {
|
|
at91_set_a_periph(AT91_PIO_PORTA, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 1)) {
|
|
at91_set_b_periph(AT91_PIO_PORTC, 11, 1);
|
|
}
|
|
if (cs_mask & (1 << 2)) {
|
|
at91_set_b_periph(AT91_PIO_PORTC, 16, 1);
|
|
}
|
|
if (cs_mask & (1 << 3)) {
|
|
at91_set_b_periph(AT91_PIO_PORTC, 17, 1);
|
|
}
|
|
if (cs_mask & (1 << 4)) {
|
|
at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 5)) {
|
|
at91_set_pio_output(AT91_PIO_PORTC, 11, 1);
|
|
}
|
|
if (cs_mask & (1 << 6)) {
|
|
at91_set_pio_output(AT91_PIO_PORTC, 16, 1);
|
|
}
|
|
if (cs_mask & (1 << 7)) {
|
|
at91_set_pio_output(AT91_PIO_PORTC, 17, 1);
|
|
}
|
|
}
|
|
|
|
void at91_spi1_hw_init(unsigned long cs_mask)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI1_MISO */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI1_MOSI */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI1_SPCK */
|
|
|
|
/* Enable clock */
|
|
writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
|
|
|
|
if (cs_mask & (1 << 0)) {
|
|
at91_set_a_periph(AT91_PIO_PORTB, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 1)) {
|
|
at91_set_b_periph(AT91_PIO_PORTC, 5, 1);
|
|
}
|
|
if (cs_mask & (1 << 2)) {
|
|
at91_set_b_periph(AT91_PIO_PORTC, 4, 1);
|
|
}
|
|
if (cs_mask & (1 << 3)) {
|
|
at91_set_b_periph(AT91_PIO_PORTC, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 4)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 5)) {
|
|
at91_set_pio_output(AT91_PIO_PORTC, 5, 1);
|
|
}
|
|
if (cs_mask & (1 << 6)) {
|
|
at91_set_pio_output(AT91_PIO_PORTC, 4, 1);
|
|
}
|
|
if (cs_mask & (1 << 7)) {
|
|
at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACB
|
|
void at91_macb_hw_init(void)
|
|
{
|
|
/* Enable EMAC clock */
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* ETXCK_EREFCK */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ERXDV */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* ERX0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* ERX1 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* ERXER */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* ETXEN */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* ETX0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* ETX1 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* EMDIO */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* EMDC */
|
|
|
|
#ifndef CONFIG_RMII
|
|
at91_set_b_periph(AT91_PIO_PORTA, 28, 0); /* ECRS */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 29, 0); /* ECOL */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 25, 0); /* ERX2 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 26, 0); /* ERX3 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 27, 0); /* ERXCK */
|
|
#if defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AFEB9260)
|
|
/*
|
|
* use PA10, PA11 for ETX2, ETX3.
|
|
* PA23 and PA24 are for TWI EEPROM
|
|
*/
|
|
at91_set_b_periph(AT91_PIO_PORTA, 10, 0); /* ETX2 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 11, 0); /* ETX3 */
|
|
#else
|
|
at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* ETX2 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 24, 0); /* ETX3 */
|
|
#if defined(CONFIG_AT91SAM9G20)
|
|
/* 9G20 BOOT ROM initializes those pins to multi-drive, undo that */
|
|
at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 0);
|
|
at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 0);
|
|
#endif
|
|
#endif
|
|
at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* ETXER */
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_GENERIC_ATMEL_MCI)
|
|
void at91_mci_hw_init(void)
|
|
{
|
|
/* Enable mci clock */
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
writel(1 << ATMEL_ID_MCI, &pmc->pcer);
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */
|
|
#if defined(CONFIG_ATMEL_MCI_PORTB)
|
|
at91_set_b_periph(AT91_PIO_PORTA, 1, 1); /* MCCDB */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 0, 1); /* MCDB0 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 5, 1); /* MCDB1 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 4, 1); /* MCDB2 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 3, 1); /* MCDB3 */
|
|
#else
|
|
at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* MCCDA */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* MCDA0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 9, 1); /* MCDA1 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* MCDA2 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* MCDA3 */
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
void at91_sdram_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTC, 16, 0);
|
|
at91_set_a_periph(AT91_PIO_PORTC, 17, 0);
|
|
at91_set_a_periph(AT91_PIO_PORTC, 18, 0);
|
|
at91_set_a_periph(AT91_PIO_PORTC, 19, 0);
|
|
at91_set_a_periph(AT91_PIO_PORTC, 20, 0);
|
|
at91_set_a_periph(AT91_PIO_PORTC, 21, 0);
|
|
at91_set_a_periph(AT91_PIO_PORTC, 22, 0);
|
|
at91_set_a_periph(AT91_PIO_PORTC, 23, 0);
|
|
at91_set_a_periph(AT91_PIO_PORTC, 24, 0);
|
|
at91_set_a_periph(AT91_PIO_PORTC, 25, 0);
|
|
at91_set_a_periph(AT91_PIO_PORTC, 26, 0);
|
|
at91_set_a_periph(AT91_PIO_PORTC, 27, 0);
|
|
at91_set_a_periph(AT91_PIO_PORTC, 28, 0);
|
|
at91_set_a_periph(AT91_PIO_PORTC, 29, 0);
|
|
at91_set_a_periph(AT91_PIO_PORTC, 30, 0);
|
|
at91_set_a_periph(AT91_PIO_PORTC, 31, 0);
|
|
}
|
|
|
|
/* Platform data for the GPIOs */
|
|
static const struct at91_port_platdata at91sam9260_plat[] = {
|
|
{ ATMEL_BASE_PIOA, "PA" },
|
|
{ ATMEL_BASE_PIOB, "PB" },
|
|
{ ATMEL_BASE_PIOC, "PC" },
|
|
};
|
|
|
|
U_BOOT_DEVICES(at91sam9260_gpios) = {
|
|
{ "gpio_at91", &at91sam9260_plat[0] },
|
|
{ "gpio_at91", &at91sam9260_plat[1] },
|
|
{ "gpio_at91", &at91sam9260_plat[2] },
|
|
};
|