mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 14:10:43 +00:00
451e824125
This adds a common environment and support for distro boot in the common socfpga header. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Acked-by: Marek Vasut <marex@denx.de> -- Changes in v5: - Per Frank, to support OpenSuse the ENV must be after the GPT Changes in v4: - Move env back to being right after the MBR Changes in v3: - fix spacing between asterix - remove verify=n as a default setting Changes in v2: - Remove unneeded CONFIG_BOOTFILE and fdt_addr - cleanup spacing in MMC env size common Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
370 lines
9.4 KiB
C
370 lines
9.4 KiB
C
/*
|
|
* Copyright (C) 2012 Altera Corporation <www.altera.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#ifndef __CONFIG_SOCFPGA_COMMON_H__
|
|
#define __CONFIG_SOCFPGA_COMMON_H__
|
|
|
|
/* Virtual target or real hardware */
|
|
#undef CONFIG_SOCFPGA_VIRTUAL_TARGET
|
|
|
|
/*
|
|
* High level configuration
|
|
*/
|
|
#define CONFIG_DISPLAY_BOARDINFO_LATE
|
|
#define CONFIG_CLOCKS
|
|
|
|
#define CONFIG_CRC32_VERIFY
|
|
|
|
#define CONFIG_SYS_BOOTMAPSZ (64 * 1024 * 1024)
|
|
|
|
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
|
|
|
|
/* add target to build it automatically upon "make" */
|
|
#define CONFIG_BUILD_TARGET "u-boot-with-spl.sfp"
|
|
|
|
/*
|
|
* Memory configurations
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM_1 0x0
|
|
#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
|
|
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
|
|
#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
|
|
#define CONFIG_SYS_TEXT_BASE 0x08000040
|
|
#else
|
|
#define CONFIG_SYS_TEXT_BASE 0x01000040
|
|
#endif
|
|
|
|
/*
|
|
* U-Boot general configurations
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
|
|
#define CONFIG_SYS_PBSIZE \
|
|
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
/* Print buffer size */
|
|
#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
/* Boot argument buffer size */
|
|
#define CONFIG_AUTO_COMPLETE /* Command auto complete */
|
|
#define CONFIG_CMDLINE_EDITING /* Command history etc */
|
|
|
|
#ifndef CONFIG_SYS_HOSTNAME
|
|
#define CONFIG_SYS_HOSTNAME CONFIG_SYS_BOARD
|
|
#endif
|
|
|
|
#define CONFIG_CMD_PXE
|
|
#define CONFIG_MENU
|
|
|
|
/*
|
|
* Cache
|
|
*/
|
|
#define CONFIG_SYS_L2_PL310
|
|
#define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS
|
|
|
|
/*
|
|
* EPCS/EPCQx1 Serial Flash Controller
|
|
*/
|
|
#ifdef CONFIG_ALTERA_SPI
|
|
#define CONFIG_SF_DEFAULT_SPEED 30000000
|
|
/*
|
|
* The base address is configurable in QSys, each board must specify the
|
|
* base address based on it's particular FPGA configuration. Please note
|
|
* that the address here is incremented by 0x400 from the Base address
|
|
* selected in QSys, since the SPI registers are at offset +0x400.
|
|
* #define CONFIG_SYS_SPI_BASE 0xff240400
|
|
*/
|
|
#endif
|
|
|
|
/*
|
|
* Ethernet on SoC (EMAC)
|
|
*/
|
|
#if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
|
|
#define CONFIG_DW_ALTDESCRIPTOR
|
|
#define CONFIG_MII
|
|
#define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ)
|
|
#define CONFIG_PHY_GIGE
|
|
#endif
|
|
|
|
/*
|
|
* FPGA Driver
|
|
*/
|
|
#ifdef CONFIG_CMD_FPGA
|
|
#define CONFIG_FPGA
|
|
#define CONFIG_FPGA_ALTERA
|
|
#define CONFIG_FPGA_SOCFPGA
|
|
#define CONFIG_FPGA_COUNT 1
|
|
#endif
|
|
|
|
/*
|
|
* L4 OSC1 Timer 0
|
|
*/
|
|
/* This timer uses eosc1, whose clock frequency is fixed at any condition. */
|
|
#define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS
|
|
#define CONFIG_SYS_TIMER_COUNTS_DOWN
|
|
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
|
|
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
|
|
#define CONFIG_SYS_TIMER_RATE 2400000
|
|
#else
|
|
#define CONFIG_SYS_TIMER_RATE 25000000
|
|
#endif
|
|
|
|
/*
|
|
* L4 Watchdog
|
|
*/
|
|
#ifdef CONFIG_HW_WATCHDOG
|
|
#define CONFIG_DESIGNWARE_WATCHDOG
|
|
#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
|
|
#define CONFIG_DW_WDT_CLOCK_KHZ 25000
|
|
#define CONFIG_HW_WATCHDOG_TIMEOUT_MS 30000
|
|
#endif
|
|
|
|
/*
|
|
* MMC Driver
|
|
*/
|
|
#ifdef CONFIG_CMD_MMC
|
|
#define CONFIG_BOUNCE_BUFFER
|
|
/* FIXME */
|
|
/* using smaller max blk cnt to avoid flooding the limited stack we have */
|
|
#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */
|
|
#endif
|
|
|
|
/*
|
|
* NAND Support
|
|
*/
|
|
#ifdef CONFIG_NAND_DENALI
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_MAX_CHIPS 1
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
#define CONFIG_NAND_DENALI_ECC_SIZE 512
|
|
#define CONFIG_SYS_NAND_REGS_BASE SOCFPGA_NANDREGS_ADDRESS
|
|
#define CONFIG_SYS_NAND_DATA_BASE SOCFPGA_NANDDATA_ADDRESS
|
|
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10)
|
|
#endif
|
|
|
|
/*
|
|
* I2C support
|
|
*/
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_BUS_MAX 4
|
|
#define CONFIG_SYS_I2C_BASE SOCFPGA_I2C0_ADDRESS
|
|
#define CONFIG_SYS_I2C_BASE1 SOCFPGA_I2C1_ADDRESS
|
|
#define CONFIG_SYS_I2C_BASE2 SOCFPGA_I2C2_ADDRESS
|
|
#define CONFIG_SYS_I2C_BASE3 SOCFPGA_I2C3_ADDRESS
|
|
/* Using standard mode which the speed up to 100Kb/s */
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_SYS_I2C_SPEED1 100000
|
|
#define CONFIG_SYS_I2C_SPEED2 100000
|
|
#define CONFIG_SYS_I2C_SPEED3 100000
|
|
/* Address of device when used as slave */
|
|
#define CONFIG_SYS_I2C_SLAVE 0x02
|
|
#define CONFIG_SYS_I2C_SLAVE1 0x02
|
|
#define CONFIG_SYS_I2C_SLAVE2 0x02
|
|
#define CONFIG_SYS_I2C_SLAVE3 0x02
|
|
#ifndef __ASSEMBLY__
|
|
/* Clock supplied to I2C controller in unit of MHz */
|
|
unsigned int cm_get_l4_sp_clk_hz(void);
|
|
#define IC_CLK (cm_get_l4_sp_clk_hz() / 1000000)
|
|
#endif
|
|
|
|
/*
|
|
* QSPI support
|
|
*/
|
|
/* Enable multiple SPI NOR flash manufacturers */
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_SPI_FLASH_MTD
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_MTD_DEVICE
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define MTDIDS_DEFAULT "nor0=ff705000.spi.0"
|
|
#endif
|
|
/* QSPI reference clock */
|
|
#ifndef __ASSEMBLY__
|
|
unsigned int cm_get_qspi_controller_clk_hz(void);
|
|
#define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz()
|
|
#endif
|
|
#define CONFIG_CQSPI_DECODER 0
|
|
#define CONFIG_BOUNCE_BUFFER
|
|
|
|
/*
|
|
* Designware SPI support
|
|
*/
|
|
|
|
/*
|
|
* Serial Driver
|
|
*/
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE -4
|
|
#define CONFIG_SYS_NS16550_COM1 SOCFPGA_UART0_ADDRESS
|
|
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
|
|
#define CONFIG_SYS_NS16550_CLK 1000000
|
|
#else
|
|
#define CONFIG_SYS_NS16550_CLK 100000000
|
|
#endif
|
|
#define CONFIG_CONS_INDEX 1
|
|
|
|
/*
|
|
* USB
|
|
*/
|
|
#ifdef CONFIG_CMD_USB
|
|
#define CONFIG_USB_DWC2
|
|
#endif
|
|
|
|
/*
|
|
* USB Gadget (DFU, UMS)
|
|
*/
|
|
#if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
|
|
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
|
|
|
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (16 * 1024 * 1024)
|
|
#define DFU_DEFAULT_POLL_TIMEOUT 300
|
|
|
|
/* USB IDs */
|
|
#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525
|
|
#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5
|
|
#endif
|
|
|
|
/*
|
|
* U-Boot environment
|
|
*/
|
|
#if !defined(CONFIG_ENV_SIZE)
|
|
#define CONFIG_ENV_SIZE (8 * 1024)
|
|
#endif
|
|
|
|
/* Environment for SDMMC boot */
|
|
#if defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_OFFSET)
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */
|
|
#define CONFIG_ENV_OFFSET (34 * 512) /* just after the GPT */
|
|
#endif
|
|
|
|
/* Environment for QSPI boot */
|
|
#if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_OFFSET)
|
|
#define CONFIG_ENV_OFFSET 0x00100000
|
|
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
|
|
#endif
|
|
|
|
/*
|
|
* mtd partitioning for serial NOR flash
|
|
*
|
|
* device nor0 <ff705000.spi.0>, # parts = 6
|
|
* #: name size offset mask_flags
|
|
* 0: u-boot 0x00100000 0x00000000 0
|
|
* 1: env1 0x00040000 0x00100000 0
|
|
* 2: env2 0x00040000 0x00140000 0
|
|
* 3: UBI 0x03e80000 0x00180000 0
|
|
* 4: boot 0x00e80000 0x00180000 0
|
|
* 5: rootfs 0x01000000 0x01000000 0
|
|
*
|
|
*/
|
|
#if defined(CONFIG_CMD_SF) && !defined(MTDPARTS_DEFAULT)
|
|
#define MTDPARTS_DEFAULT "mtdparts=ff705000.spi.0:"\
|
|
"1m(u-boot)," \
|
|
"256k(env1)," \
|
|
"256k(env2)," \
|
|
"14848k(boot)," \
|
|
"16m(rootfs)," \
|
|
"-@1536k(UBI)\0"
|
|
#endif
|
|
|
|
/* UBI and UBIFS support */
|
|
#if defined(CONFIG_CMD_SF) || defined(CONFIG_CMD_NAND)
|
|
#define CONFIG_CMD_UBIFS
|
|
#define CONFIG_RBTREE
|
|
#define CONFIG_LZO
|
|
#endif
|
|
|
|
/*
|
|
* SPL
|
|
*
|
|
* SRAM Memory layout:
|
|
*
|
|
* 0xFFFF_0000 ...... Start of SRAM
|
|
* 0xFFFF_xxxx ...... Top of stack (grows down)
|
|
* 0xFFFF_yyyy ...... Malloc area
|
|
* 0xFFFF_zzzz ...... Global Data
|
|
* 0xFFFF_FF00 ...... End of SRAM
|
|
*/
|
|
#define CONFIG_SPL_FRAMEWORK
|
|
#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR
|
|
#define CONFIG_SPL_MAX_SIZE (64 * 1024)
|
|
|
|
/* SPL SDMMC boot support */
|
|
#ifdef CONFIG_SPL_MMC_SUPPORT
|
|
#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
|
|
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
|
|
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
|
|
#endif
|
|
#else
|
|
#ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
|
|
#endif
|
|
#endif
|
|
|
|
/* SPL QSPI boot support */
|
|
#ifdef CONFIG_SPL_SPI_SUPPORT
|
|
#define CONFIG_SPL_SPI_LOAD
|
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
|
|
#endif
|
|
|
|
/* SPL NAND boot support */
|
|
#ifdef CONFIG_SPL_NAND_SUPPORT
|
|
#define CONFIG_SYS_NAND_USE_FLASH_BBT
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
|
|
#endif
|
|
|
|
/*
|
|
* Stack setup
|
|
*/
|
|
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
|
|
|
|
/* Extra Environment */
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#include <config_distro_defaults.h>
|
|
|
|
#ifdef CONFIG_CMD_PXE
|
|
#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
|
|
#else
|
|
#define BOOT_TARGET_DEVICES_PXE(func)
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_MMC
|
|
#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
|
|
#else
|
|
#define BOOT_TARGET_DEVICES_MMC(func)
|
|
#endif
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
BOOT_TARGET_DEVICES_MMC(func) \
|
|
BOOT_TARGET_DEVICES_PXE(func) \
|
|
func(DHCP, dhcp, na)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#ifndef CONFIG_EXTRA_ENV_SETTINGS
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
|
|
"bootm_size=0xa000000\0" \
|
|
"kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \
|
|
"fdt_addr_r=0x02000000\0" \
|
|
"scriptaddr=0x02100000\0" \
|
|
"pxefile_addr_r=0x02200000\0" \
|
|
"ramdisk_addr_r=0x02300000\0" \
|
|
BOOTENV
|
|
|
|
#endif
|
|
#endif
|
|
|
|
#endif /* __CONFIG_SOCFPGA_COMMON_H__ */
|