mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
52ef43b052
These files are for code that runs on the CPU (A15) on Tegra124 boards. At this time, there is no A15-specific code here. The warmboot/LP0 files aren't included as that code hasn't been ported yet. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
69 lines
1.7 KiB
C
69 lines
1.7 KiB
C
/*
|
|
* (C) Copyright 2013
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/* Tegra124 high-level function multiplexing */
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/funcmux.h>
|
|
#include <asm/arch/pinmux.h>
|
|
|
|
int funcmux_select(enum periph_id id, int config)
|
|
{
|
|
int bad_config = config != FUNCMUX_DEFAULT;
|
|
|
|
switch (id) {
|
|
case PERIPH_ID_UART4:
|
|
switch (config) {
|
|
case FUNCMUX_UART4_GPIO: /* TXD,RXD,CTS,RTS */
|
|
pinmux_set_func(PINGRP_GPIO_PJ7, PMUX_FUNC_UARTD);
|
|
pinmux_set_func(PINGRP_GPIO_PB0, PMUX_FUNC_UARTD);
|
|
pinmux_set_func(PINGRP_GPIO_PB1, PMUX_FUNC_UARTD);
|
|
pinmux_set_func(PINGRP_GPIO_PK7, PMUX_FUNC_UARTD);
|
|
|
|
pinmux_set_io(PINGRP_GPIO_PJ7, PMUX_PIN_OUTPUT);
|
|
pinmux_set_io(PINGRP_GPIO_PB0, PMUX_PIN_INPUT);
|
|
pinmux_set_io(PINGRP_GPIO_PB1, PMUX_PIN_INPUT);
|
|
pinmux_set_io(PINGRP_GPIO_PK7, PMUX_PIN_OUTPUT);
|
|
|
|
pinmux_tristate_disable(PINGRP_GPIO_PJ7);
|
|
pinmux_tristate_disable(PINGRP_GPIO_PB0);
|
|
pinmux_tristate_disable(PINGRP_GPIO_PB1);
|
|
pinmux_tristate_disable(PINGRP_GPIO_PK7);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case PERIPH_ID_UART1:
|
|
switch (config) {
|
|
case FUNCMUX_UART1_KBC:
|
|
pinmux_set_func(PINGRP_KB_ROW9, PMUX_FUNC_UARTA);
|
|
pinmux_set_func(PINGRP_KB_ROW10, PMUX_FUNC_UARTA);
|
|
|
|
pinmux_set_io(PINGRP_KB_ROW9, PMUX_PIN_OUTPUT);
|
|
pinmux_set_io(PINGRP_KB_ROW10, PMUX_PIN_INPUT);
|
|
|
|
pinmux_tristate_disable(PINGRP_KB_ROW9);
|
|
pinmux_tristate_disable(PINGRP_KB_ROW10);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
/* Add other periph IDs here as needed */
|
|
|
|
default:
|
|
debug("%s: invalid periph_id %d", __func__, id);
|
|
return -1;
|
|
}
|
|
|
|
if (bad_config) {
|
|
debug("%s: invalid config %d for periph_id %d", __func__,
|
|
config, id);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|