mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
13e0b8f7ca
Remove a redundant register definition, clean up some coding style violations. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
257 lines
12 KiB
C
257 lines
12 KiB
C
/*
|
|
* Cirrus Logic CS8900A Ethernet
|
|
*
|
|
* (C) Copyright 2002
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*
|
|
* Copyright (C) 1999 Ben Williamson <benw@pobox.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is loaded into SRAM in bootstrap mode, where it waits
|
|
* for commands on UART1 to read and write memory, jump to code etc.
|
|
* A design goal for this program is to be entirely independent of the
|
|
* target board. Anything with a CL-PS7111 or EP7211 should be able to run
|
|
* this code in bootstrap mode. All the board specifics can be handled on
|
|
* the host.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <asm/types.h>
|
|
#include <config.h>
|
|
|
|
#ifdef CONFIG_DRIVER_CS8900
|
|
|
|
/* although the registers are 16 bit, they are 32-bit aligned on the
|
|
EDB7111. so we have to read them as 32-bit registers and ignore the
|
|
upper 16-bits. i'm not sure if this holds for the EDB7211. */
|
|
|
|
#ifdef CS8900_BUS16
|
|
/* 16 bit aligned registers, 16 bit wide */
|
|
#define CS8900_REG u16
|
|
#define CS8900_OFF 0x02
|
|
#define CS8900_BUS16_0 *(volatile u8 *)(CS8900_BASE+0x00)
|
|
#define CS8900_BUS16_1 *(volatile u8 *)(CS8900_BASE+0x01)
|
|
#elif defined(CS8900_BUS32)
|
|
/* 32 bit aligned registers, 16 bit wide (we ignore upper 16 bits) */
|
|
#define CS8900_REG u32
|
|
#define CS8900_OFF 0x04
|
|
#else
|
|
#error unknown bussize ...
|
|
#endif
|
|
|
|
#define CS8900_RTDATA *(volatile CS8900_REG *)(CS8900_BASE+0x00*CS8900_OFF)
|
|
#define CS8900_TxCMD *(volatile CS8900_REG *)(CS8900_BASE+0x02*CS8900_OFF)
|
|
#define CS8900_TxLEN *(volatile CS8900_REG *)(CS8900_BASE+0x03*CS8900_OFF)
|
|
#define CS8900_ISQ *(volatile CS8900_REG *)(CS8900_BASE+0x04*CS8900_OFF)
|
|
#define CS8900_PPTR *(volatile CS8900_REG *)(CS8900_BASE+0x05*CS8900_OFF)
|
|
#define CS8900_PDATA *(volatile CS8900_REG *)(CS8900_BASE+0x06*CS8900_OFF)
|
|
|
|
|
|
#define ISQ_RxEvent 0x04
|
|
#define ISQ_TxEvent 0x08
|
|
#define ISQ_BufEvent 0x0C
|
|
#define ISQ_RxMissEvent 0x10
|
|
#define ISQ_TxColEvent 0x12
|
|
#define ISQ_EventMask 0x3F
|
|
|
|
/* packet page register offsets */
|
|
|
|
/* bus interface registers */
|
|
#define PP_ChipID 0x0000 /* Chip identifier - must be 0x630E */
|
|
#define PP_ChipRev 0x0002 /* Chip revision, model codes */
|
|
|
|
#define PP_IntReg 0x0022 /* Interrupt configuration */
|
|
#define PP_IntReg_IRQ0 0x0000 /* Use INTR0 pin */
|
|
#define PP_IntReg_IRQ1 0x0001 /* Use INTR1 pin */
|
|
#define PP_IntReg_IRQ2 0x0002 /* Use INTR2 pin */
|
|
#define PP_IntReg_IRQ3 0x0003 /* Use INTR3 pin */
|
|
|
|
/* status and control registers */
|
|
|
|
#define PP_RxCFG 0x0102 /* Receiver configuration */
|
|
#define PP_RxCFG_Skip1 0x0040 /* Skip (i.e. discard) current frame */
|
|
#define PP_RxCFG_Stream 0x0080 /* Enable streaming mode */
|
|
#define PP_RxCFG_RxOK 0x0100 /* RxOK interrupt enable */
|
|
#define PP_RxCFG_RxDMAonly 0x0200 /* Use RxDMA for all frames */
|
|
#define PP_RxCFG_AutoRxDMA 0x0400 /* Select RxDMA automatically */
|
|
#define PP_RxCFG_BufferCRC 0x0800 /* Include CRC characters in frame */
|
|
#define PP_RxCFG_CRC 0x1000 /* Enable interrupt on CRC error */
|
|
#define PP_RxCFG_RUNT 0x2000 /* Enable interrupt on RUNT frames */
|
|
#define PP_RxCFG_EXTRA 0x4000 /* Enable interrupt on frames with extra data */
|
|
|
|
#define PP_RxCTL 0x0104 /* Receiver control */
|
|
#define PP_RxCTL_IAHash 0x0040 /* Accept frames that match hash */
|
|
#define PP_RxCTL_Promiscuous 0x0080 /* Accept any frame */
|
|
#define PP_RxCTL_RxOK 0x0100 /* Accept well formed frames */
|
|
#define PP_RxCTL_Multicast 0x0200 /* Accept multicast frames */
|
|
#define PP_RxCTL_IA 0x0400 /* Accept frame that matches IA */
|
|
#define PP_RxCTL_Broadcast 0x0800 /* Accept broadcast frames */
|
|
#define PP_RxCTL_CRC 0x1000 /* Accept frames with bad CRC */
|
|
#define PP_RxCTL_RUNT 0x2000 /* Accept runt frames */
|
|
#define PP_RxCTL_EXTRA 0x4000 /* Accept frames that are too long */
|
|
|
|
#define PP_TxCFG 0x0106 /* Transmit configuration */
|
|
#define PP_TxCFG_CRS 0x0040 /* Enable interrupt on loss of carrier */
|
|
#define PP_TxCFG_SQE 0x0080 /* Enable interrupt on Signal Quality Error */
|
|
#define PP_TxCFG_TxOK 0x0100 /* Enable interrupt on successful xmits */
|
|
#define PP_TxCFG_Late 0x0200 /* Enable interrupt on "out of window" */
|
|
#define PP_TxCFG_Jabber 0x0400 /* Enable interrupt on jabber detect */
|
|
#define PP_TxCFG_Collision 0x0800 /* Enable interrupt if collision */
|
|
#define PP_TxCFG_16Collisions 0x8000 /* Enable interrupt if > 16 collisions */
|
|
|
|
#define PP_TxCmd 0x0108 /* Transmit command status */
|
|
#define PP_TxCmd_TxStart_5 0x0000 /* Start after 5 bytes in buffer */
|
|
#define PP_TxCmd_TxStart_381 0x0040 /* Start after 381 bytes in buffer */
|
|
#define PP_TxCmd_TxStart_1021 0x0080 /* Start after 1021 bytes in buffer */
|
|
#define PP_TxCmd_TxStart_Full 0x00C0 /* Start after all bytes loaded */
|
|
#define PP_TxCmd_Force 0x0100 /* Discard any pending packets */
|
|
#define PP_TxCmd_OneCollision 0x0200 /* Abort after a single collision */
|
|
#define PP_TxCmd_NoCRC 0x1000 /* Do not add CRC */
|
|
#define PP_TxCmd_NoPad 0x2000 /* Do not pad short packets */
|
|
|
|
#define PP_BufCFG 0x010A /* Buffer configuration */
|
|
#define PP_BufCFG_SWI 0x0040 /* Force interrupt via software */
|
|
#define PP_BufCFG_RxDMA 0x0080 /* Enable interrupt on Rx DMA */
|
|
#define PP_BufCFG_TxRDY 0x0100 /* Enable interrupt when ready for Tx */
|
|
#define PP_BufCFG_TxUE 0x0200 /* Enable interrupt in Tx underrun */
|
|
#define PP_BufCFG_RxMiss 0x0400 /* Enable interrupt on missed Rx packets */
|
|
#define PP_BufCFG_Rx128 0x0800 /* Enable Rx interrupt after 128 bytes */
|
|
#define PP_BufCFG_TxCol 0x1000 /* Enable int on Tx collision ctr overflow */
|
|
#define PP_BufCFG_Miss 0x2000 /* Enable int on Rx miss ctr overflow */
|
|
#define PP_BufCFG_RxDest 0x8000 /* Enable int on Rx dest addr match */
|
|
|
|
#define PP_LineCTL 0x0112 /* Line control */
|
|
#define PP_LineCTL_Rx 0x0040 /* Enable receiver */
|
|
#define PP_LineCTL_Tx 0x0080 /* Enable transmitter */
|
|
#define PP_LineCTL_AUIonly 0x0100 /* AUI interface only */
|
|
#define PP_LineCTL_AutoAUI10BT 0x0200 /* Autodetect AUI or 10BaseT interface */
|
|
#define PP_LineCTL_ModBackoffE 0x0800 /* Enable modified backoff algorithm */
|
|
#define PP_LineCTL_PolarityDis 0x1000 /* Disable Rx polarity autodetect */
|
|
#define PP_LineCTL_2partDefDis 0x2000 /* Disable two-part defferal */
|
|
#define PP_LineCTL_LoRxSquelch 0x4000 /* Reduce receiver squelch threshold */
|
|
|
|
#define PP_SelfCTL 0x0114 /* Chip self control */
|
|
#define PP_SelfCTL_Reset 0x0040 /* Self-clearing reset */
|
|
#define PP_SelfCTL_SWSuspend 0x0100 /* Initiate suspend mode */
|
|
#define PP_SelfCTL_HWSleepE 0x0200 /* Enable SLEEP input */
|
|
#define PP_SelfCTL_HWStandbyE 0x0400 /* Enable standby mode */
|
|
#define PP_SelfCTL_HC0E 0x1000 /* use HCB0 for LINK LED */
|
|
#define PP_SelfCTL_HC1E 0x2000 /* use HCB1 for BSTATUS LED */
|
|
#define PP_SelfCTL_HCB0 0x4000 /* control LINK LED if HC0E set */
|
|
#define PP_SelfCTL_HCB1 0x8000 /* control BSTATUS LED if HC1E set */
|
|
|
|
#define PP_BusCTL 0x0116 /* Bus control */
|
|
#define PP_BusCTL_ResetRxDMA 0x0040 /* Reset RxDMA pointer */
|
|
#define PP_BusCTL_DMAextend 0x0100 /* Extend DMA cycle */
|
|
#define PP_BusCTL_UseSA 0x0200 /* Assert MEMCS16 on address decode */
|
|
#define PP_BusCTL_MemoryE 0x0400 /* Enable memory mode */
|
|
#define PP_BusCTL_DMAburst 0x0800 /* Limit DMA access burst */
|
|
#define PP_BusCTL_IOCHRDYE 0x1000 /* Set IOCHRDY high impedence */
|
|
#define PP_BusCTL_RxDMAsize 0x2000 /* Set DMA buffer size 64KB */
|
|
#define PP_BusCTL_EnableIRQ 0x8000 /* Generate interrupt on interrupt event */
|
|
|
|
#define PP_TestCTL 0x0118 /* Test control */
|
|
#define PP_TestCTL_DisableLT 0x0080 /* Disable link status */
|
|
#define PP_TestCTL_ENDECloop 0x0200 /* Internal loopback */
|
|
#define PP_TestCTL_AUIloop 0x0400 /* AUI loopback */
|
|
#define PP_TestCTL_DisBackoff 0x0800 /* Disable backoff algorithm */
|
|
#define PP_TestCTL_FDX 0x4000 /* Enable full duplex mode */
|
|
|
|
#define PP_ISQ 0x0120 /* Interrupt Status Queue */
|
|
|
|
#define PP_RER 0x0124 /* Receive event */
|
|
#define PP_RER_IAHash 0x0040 /* Frame hash match */
|
|
#define PP_RER_Dribble 0x0080 /* Frame had 1-7 extra bits after last byte */
|
|
#define PP_RER_RxOK 0x0100 /* Frame received with no errors */
|
|
#define PP_RER_Hashed 0x0200 /* Frame address hashed OK */
|
|
#define PP_RER_IA 0x0400 /* Frame address matched IA */
|
|
#define PP_RER_Broadcast 0x0800 /* Broadcast frame */
|
|
#define PP_RER_CRC 0x1000 /* Frame had CRC error */
|
|
#define PP_RER_RUNT 0x2000 /* Runt frame */
|
|
#define PP_RER_EXTRA 0x4000 /* Frame was too long */
|
|
|
|
#define PP_TER 0x0128 /* Transmit event */
|
|
#define PP_TER_CRS 0x0040 /* Carrier lost */
|
|
#define PP_TER_SQE 0x0080 /* Signal Quality Error */
|
|
#define PP_TER_TxOK 0x0100 /* Packet sent without error */
|
|
#define PP_TER_Late 0x0200 /* Out of window */
|
|
#define PP_TER_Jabber 0x0400 /* Stuck transmit? */
|
|
#define PP_TER_NumCollisions 0x7800 /* Number of collisions */
|
|
#define PP_TER_16Collisions 0x8000 /* > 16 collisions */
|
|
|
|
#define PP_BER 0x012C /* Buffer event */
|
|
#define PP_BER_SWint 0x0040 /* Software interrupt */
|
|
#define PP_BER_RxDMAFrame 0x0080 /* Received framed DMAed */
|
|
#define PP_BER_Rdy4Tx 0x0100 /* Ready for transmission */
|
|
#define PP_BER_TxUnderrun 0x0200 /* Transmit underrun */
|
|
#define PP_BER_RxMiss 0x0400 /* Received frame missed */
|
|
#define PP_BER_Rx128 0x0800 /* 128 bytes received */
|
|
#define PP_BER_RxDest 0x8000 /* Received framed passed address filter */
|
|
|
|
#define PP_RxMiss 0x0130 /* Receiver miss counter */
|
|
|
|
#define PP_TxCol 0x0132 /* Transmit collision counter */
|
|
|
|
#define PP_LineSTAT 0x0134 /* Line status */
|
|
#define PP_LineSTAT_LinkOK 0x0080 /* Line is connected and working */
|
|
#define PP_LineSTAT_AUI 0x0100 /* Connected via AUI */
|
|
#define PP_LineSTAT_10BT 0x0200 /* Connected via twisted pair */
|
|
#define PP_LineSTAT_Polarity 0x1000 /* Line polarity OK (10BT only) */
|
|
#define PP_LineSTAT_CRS 0x4000 /* Frame being received */
|
|
|
|
#define PP_SelfSTAT 0x0136 /* Chip self status */
|
|
#define PP_SelfSTAT_33VActive 0x0040 /* supply voltage is 3.3V */
|
|
#define PP_SelfSTAT_InitD 0x0080 /* Chip initialization complete */
|
|
#define PP_SelfSTAT_SIBSY 0x0100 /* EEPROM is busy */
|
|
#define PP_SelfSTAT_EEPROM 0x0200 /* EEPROM present */
|
|
#define PP_SelfSTAT_EEPROM_OK 0x0400 /* EEPROM checks out */
|
|
#define PP_SelfSTAT_ELPresent 0x0800 /* External address latch logic available */
|
|
#define PP_SelfSTAT_EEsize 0x1000 /* Size of EEPROM */
|
|
|
|
#define PP_BusSTAT 0x0138 /* Bus status */
|
|
#define PP_BusSTAT_TxBid 0x0080 /* Tx error */
|
|
#define PP_BusSTAT_TxRDY 0x0100 /* Ready for Tx data */
|
|
|
|
#define PP_TDR 0x013C /* AUI Time Domain Reflectometer */
|
|
|
|
/* initiate transmit registers */
|
|
|
|
#define PP_TxCommand 0x0144 /* Tx Command */
|
|
#define PP_TxLength 0x0146 /* Tx Length */
|
|
|
|
|
|
/* address filter registers */
|
|
|
|
#define PP_LAF 0x0150 /* Logical address filter (6 bytes) */
|
|
#define PP_IA 0x0158 /* Individual address (MAC) */
|
|
|
|
/* EEPROM Kram */
|
|
#define SI_BUSY 0x0100
|
|
#define PP_EECMD 0x0040 /* NVR Interface Command register */
|
|
#define PP_EEData 0x0042 /* NVR Interface Data Register */
|
|
#define EEPROM_WRITE_EN 0x00F0
|
|
#define EEPROM_WRITE_DIS 0x0000
|
|
#define EEPROM_WRITE_CMD 0x0100
|
|
#define EEPROM_READ_CMD 0x0200
|
|
#define EEPROM_ERASE_CMD 0x0300
|
|
|
|
extern int cs8900_e2prom_read(uchar, ushort *);
|
|
extern int cs8900_e2prom_write(uchar, ushort);
|
|
|
|
#endif /* CONFIG_DRIVER_CS8900 */
|