mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 17:28:15 +00:00
691d719db7
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
326 lines
8.4 KiB
C
326 lines
8.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2017 Rockchip Electronics Co., Ltd
|
|
*/
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <init.h>
|
|
#include <asm/armv8/mmu.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch-rockchip/grf_px30.h>
|
|
#include <asm/arch-rockchip/hardware.h>
|
|
#include <asm/arch-rockchip/uart.h>
|
|
#include <asm/arch-rockchip/clock.h>
|
|
#include <asm/arch-rockchip/cru_px30.h>
|
|
#include <dt-bindings/clock/px30-cru.h>
|
|
|
|
static struct mm_region px30_mem_map[] = {
|
|
{
|
|
.virt = 0x0UL,
|
|
.phys = 0x0UL,
|
|
.size = 0xff000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
PTE_BLOCK_INNER_SHARE
|
|
}, {
|
|
.virt = 0xff000000UL,
|
|
.phys = 0xff000000UL,
|
|
.size = 0x01000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
}, {
|
|
/* List terminator */
|
|
0,
|
|
}
|
|
};
|
|
|
|
struct mm_region *mem_map = px30_mem_map;
|
|
|
|
#define PMU_PWRDN_CON 0xff000018
|
|
#define PMUGRF_BASE 0xff010000
|
|
#define GRF_BASE 0xff140000
|
|
#define CRU_BASE 0xff2b0000
|
|
#define VIDEO_PHY_BASE 0xff2e0000
|
|
#define SERVICE_CORE_ADDR 0xff508000
|
|
#define DDR_FW_BASE 0xff534000
|
|
|
|
#define FW_DDR_CON 0x40
|
|
|
|
#define QOS_PRIORITY 0x08
|
|
|
|
#define QOS_PRIORITY_LEVEL(h, l) ((((h) & 3) << 8) | ((l) & 3))
|
|
|
|
/* GRF_GPIO1BH_IOMUX */
|
|
enum {
|
|
GPIO1B7_SHIFT = 12,
|
|
GPIO1B7_MASK = 0xf << GPIO1B7_SHIFT,
|
|
GPIO1B7_GPIO = 0,
|
|
GPIO1B7_FLASH_RDN,
|
|
GPIO1B7_UART3_RXM1,
|
|
GPIO1B7_SPI0_CLK,
|
|
|
|
GPIO1B6_SHIFT = 8,
|
|
GPIO1B6_MASK = 0xf << GPIO1B6_SHIFT,
|
|
GPIO1B6_GPIO = 0,
|
|
GPIO1B6_FLASH_CS1,
|
|
GPIO1B6_UART3_TXM1,
|
|
GPIO1B6_SPI0_CSN,
|
|
};
|
|
|
|
/* GRF_GPIO1CL_IOMUX */
|
|
enum {
|
|
GPIO1C1_SHIFT = 4,
|
|
GPIO1C1_MASK = 0xf << GPIO1C1_SHIFT,
|
|
GPIO1C1_GPIO = 0,
|
|
GPIO1C1_UART1_TX,
|
|
|
|
GPIO1C0_SHIFT = 0,
|
|
GPIO1C0_MASK = 0xf << GPIO1C0_SHIFT,
|
|
GPIO1C0_GPIO = 0,
|
|
GPIO1C0_UART1_RX,
|
|
};
|
|
|
|
/* GRF_GPIO1DL_IOMUX */
|
|
enum {
|
|
GPIO1D3_SHIFT = 12,
|
|
GPIO1D3_MASK = 0xf << GPIO1D3_SHIFT,
|
|
GPIO1D3_GPIO = 0,
|
|
GPIO1D3_SDMMC_D1,
|
|
GPIO1D3_UART2_RXM0,
|
|
|
|
GPIO1D2_SHIFT = 8,
|
|
GPIO1D2_MASK = 0xf << GPIO1D2_SHIFT,
|
|
GPIO1D2_GPIO = 0,
|
|
GPIO1D2_SDMMC_D0,
|
|
GPIO1D2_UART2_TXM0,
|
|
};
|
|
|
|
/* GRF_GPIO1DH_IOMUX */
|
|
enum {
|
|
GPIO1D7_SHIFT = 12,
|
|
GPIO1D7_MASK = 0xf << GPIO1D7_SHIFT,
|
|
GPIO1D7_GPIO = 0,
|
|
GPIO1D7_SDMMC_CMD,
|
|
|
|
GPIO1D6_SHIFT = 8,
|
|
GPIO1D6_MASK = 0xf << GPIO1D6_SHIFT,
|
|
GPIO1D6_GPIO = 0,
|
|
GPIO1D6_SDMMC_CLK,
|
|
|
|
GPIO1D5_SHIFT = 4,
|
|
GPIO1D5_MASK = 0xf << GPIO1D5_SHIFT,
|
|
GPIO1D5_GPIO = 0,
|
|
GPIO1D5_SDMMC_D3,
|
|
|
|
GPIO1D4_SHIFT = 0,
|
|
GPIO1D4_MASK = 0xf << GPIO1D4_SHIFT,
|
|
GPIO1D4_GPIO = 0,
|
|
GPIO1D4_SDMMC_D2,
|
|
};
|
|
|
|
/* GRF_GPIO2BH_IOMUX */
|
|
enum {
|
|
GPIO2B6_SHIFT = 8,
|
|
GPIO2B6_MASK = 0xf << GPIO2B6_SHIFT,
|
|
GPIO2B6_GPIO = 0,
|
|
GPIO2B6_CIF_D1M0,
|
|
GPIO2B6_UART2_RXM1,
|
|
|
|
GPIO2B4_SHIFT = 0,
|
|
GPIO2B4_MASK = 0xf << GPIO2B4_SHIFT,
|
|
GPIO2B4_GPIO = 0,
|
|
GPIO2B4_CIF_D0M0,
|
|
GPIO2B4_UART2_TXM1,
|
|
};
|
|
|
|
/* GRF_GPIO3AL_IOMUX */
|
|
enum {
|
|
GPIO3A2_SHIFT = 8,
|
|
GPIO3A2_MASK = 0xf << GPIO3A2_SHIFT,
|
|
GPIO3A2_GPIO = 0,
|
|
GPIO3A2_UART5_TX = 4,
|
|
|
|
GPIO3A1_SHIFT = 4,
|
|
GPIO3A1_MASK = 0xf << GPIO3A1_SHIFT,
|
|
GPIO3A1_GPIO = 0,
|
|
GPIO3A1_UART5_RX = 4,
|
|
};
|
|
|
|
/* PMUGRF_GPIO0CL_IOMUX */
|
|
enum {
|
|
GPIO0C1_SHIFT = 2,
|
|
GPIO0C1_MASK = 0x3 << GPIO0C1_SHIFT,
|
|
GPIO0C1_GPIO = 0,
|
|
GPIO0C1_PWM_3,
|
|
GPIO0C1_UART3_RXM0,
|
|
GPIO0C1_PMU_DEBUG4,
|
|
|
|
GPIO0C0_SHIFT = 0,
|
|
GPIO0C0_MASK = 0x3 << GPIO0C0_SHIFT,
|
|
GPIO0C0_GPIO = 0,
|
|
GPIO0C0_PWM_1,
|
|
GPIO0C0_UART3_TXM0,
|
|
GPIO0C0_PMU_DEBUG3,
|
|
};
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
static struct px30_grf * const grf = (void *)GRF_BASE;
|
|
u32 __maybe_unused val;
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
/* We do some SoC one time setting here. */
|
|
/* Disable the ddr secure region setting to make it non-secure */
|
|
writel(0x0, DDR_FW_BASE + FW_DDR_CON);
|
|
|
|
/* Set cpu qos priority */
|
|
writel(QOS_PRIORITY_LEVEL(1, 1), SERVICE_CORE_ADDR + QOS_PRIORITY);
|
|
|
|
#if !defined(CONFIG_DEBUG_UART_BOARD_INIT) || \
|
|
(CONFIG_DEBUG_UART_BASE != 0xff160000) || \
|
|
(CONFIG_DEBUG_UART_CHANNEL != 0)
|
|
/* fix sdmmc pinmux if not using uart2-channel0 as debug uart */
|
|
rk_clrsetreg(&grf->gpio1dl_iomux,
|
|
GPIO1D3_MASK | GPIO1D2_MASK,
|
|
GPIO1D3_SDMMC_D1 << GPIO1D3_SHIFT |
|
|
GPIO1D2_SDMMC_D0 << GPIO1D2_SHIFT);
|
|
rk_clrsetreg(&grf->gpio1dh_iomux,
|
|
GPIO1D7_MASK | GPIO1D6_MASK | GPIO1D5_MASK | GPIO1D4_MASK,
|
|
GPIO1D7_SDMMC_CMD << GPIO1D7_SHIFT |
|
|
GPIO1D6_SDMMC_CLK << GPIO1D6_SHIFT |
|
|
GPIO1D5_SDMMC_D3 << GPIO1D5_SHIFT |
|
|
GPIO1D4_SDMMC_D2 << GPIO1D4_SHIFT);
|
|
#endif
|
|
|
|
#endif
|
|
|
|
/* Enable PD_VO (default disable at reset) */
|
|
rk_clrreg(PMU_PWRDN_CON, 1 << 13);
|
|
|
|
/* Disable video phy bandgap by default */
|
|
writel(0x82, VIDEO_PHY_BASE + 0x0000);
|
|
writel(0x05, VIDEO_PHY_BASE + 0x03ac);
|
|
|
|
/* Clear the force_jtag */
|
|
rk_clrreg(&grf->cpu_con[1], 1 << 7);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
|
|
void board_debug_uart_init(void)
|
|
{
|
|
#if defined(CONFIG_DEBUG_UART_BASE) && \
|
|
(CONFIG_DEBUG_UART_BASE == 0xff168000) && \
|
|
(CONFIG_DEBUG_UART_CHANNEL != 1)
|
|
static struct px30_pmugrf * const pmugrf = (void *)PMUGRF_BASE;
|
|
#endif
|
|
static struct px30_grf * const grf = (void *)GRF_BASE;
|
|
static struct px30_cru * const cru = (void *)CRU_BASE;
|
|
|
|
#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff158000)
|
|
/* uart_sel_clk default select 24MHz */
|
|
rk_clrsetreg(&cru->clksel_con[34],
|
|
UART1_PLL_SEL_MASK | UART1_DIV_CON_MASK,
|
|
UART1_PLL_SEL_24M << UART1_PLL_SEL_SHIFT | 0);
|
|
rk_clrsetreg(&cru->clksel_con[35],
|
|
UART1_CLK_SEL_MASK,
|
|
UART1_CLK_SEL_UART1 << UART1_CLK_SEL_SHIFT);
|
|
|
|
rk_clrsetreg(&grf->gpio1cl_iomux,
|
|
GPIO1C1_MASK | GPIO1C0_MASK,
|
|
GPIO1C1_UART1_TX << GPIO1C1_SHIFT |
|
|
GPIO1C0_UART1_RX << GPIO1C0_SHIFT);
|
|
#elif defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff168000)
|
|
/* GRF_IOFUNC_CON0 */
|
|
enum {
|
|
CON_IOMUX_UART3SEL_SHIFT = 9,
|
|
CON_IOMUX_UART3SEL_MASK = 1 << CON_IOMUX_UART3SEL_SHIFT,
|
|
CON_IOMUX_UART3SEL_M0 = 0,
|
|
CON_IOMUX_UART3SEL_M1,
|
|
};
|
|
|
|
/* uart_sel_clk default select 24MHz */
|
|
rk_clrsetreg(&cru->clksel_con[40],
|
|
UART3_PLL_SEL_MASK | UART3_DIV_CON_MASK,
|
|
UART3_PLL_SEL_24M << UART3_PLL_SEL_SHIFT | 0);
|
|
rk_clrsetreg(&cru->clksel_con[41],
|
|
UART3_CLK_SEL_MASK,
|
|
UART3_CLK_SEL_UART3 << UART3_CLK_SEL_SHIFT);
|
|
|
|
#if (CONFIG_DEBUG_UART_CHANNEL == 1)
|
|
rk_clrsetreg(&grf->iofunc_con0,
|
|
CON_IOMUX_UART3SEL_MASK,
|
|
CON_IOMUX_UART3SEL_M1 << CON_IOMUX_UART3SEL_SHIFT);
|
|
|
|
rk_clrsetreg(&grf->gpio1bh_iomux,
|
|
GPIO1B7_MASK | GPIO1B6_MASK,
|
|
GPIO1B7_UART3_RXM1 << GPIO1B7_SHIFT |
|
|
GPIO1B6_UART3_TXM1 << GPIO1B6_SHIFT);
|
|
#else
|
|
rk_clrsetreg(&grf->iofunc_con0,
|
|
CON_IOMUX_UART3SEL_MASK,
|
|
CON_IOMUX_UART3SEL_M0 << CON_IOMUX_UART3SEL_SHIFT);
|
|
|
|
rk_clrsetreg(&pmugrf->gpio0cl_iomux,
|
|
GPIO0C1_MASK | GPIO0C0_MASK,
|
|
GPIO0C1_UART3_RXM0 << GPIO0C1_SHIFT |
|
|
GPIO0C0_UART3_TXM0 << GPIO0C0_SHIFT);
|
|
#endif /* CONFIG_DEBUG_UART_CHANNEL == 1 */
|
|
|
|
#elif defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff178000)
|
|
/* uart_sel_clk default select 24MHz */
|
|
rk_clrsetreg(&cru->clksel_con[46],
|
|
UART5_PLL_SEL_MASK | UART5_DIV_CON_MASK,
|
|
UART5_PLL_SEL_24M << UART5_PLL_SEL_SHIFT | 0);
|
|
rk_clrsetreg(&cru->clksel_con[47],
|
|
UART5_CLK_SEL_MASK,
|
|
UART5_CLK_SEL_UART5 << UART5_CLK_SEL_SHIFT);
|
|
|
|
rk_clrsetreg(&grf->gpio3al_iomux,
|
|
GPIO3A2_MASK | GPIO3A1_MASK,
|
|
GPIO3A2_UART5_TX << GPIO3A2_SHIFT |
|
|
GPIO3A1_UART5_RX << GPIO3A1_SHIFT);
|
|
#else
|
|
/* GRF_IOFUNC_CON0 */
|
|
enum {
|
|
CON_IOMUX_UART2SEL_SHIFT = 10,
|
|
CON_IOMUX_UART2SEL_MASK = 3 << CON_IOMUX_UART2SEL_SHIFT,
|
|
CON_IOMUX_UART2SEL_M0 = 0,
|
|
CON_IOMUX_UART2SEL_M1,
|
|
CON_IOMUX_UART2SEL_USBPHY,
|
|
};
|
|
|
|
/* uart_sel_clk default select 24MHz */
|
|
rk_clrsetreg(&cru->clksel_con[37],
|
|
UART2_PLL_SEL_MASK | UART2_DIV_CON_MASK,
|
|
UART2_PLL_SEL_24M << UART2_PLL_SEL_SHIFT | 0);
|
|
rk_clrsetreg(&cru->clksel_con[38],
|
|
UART2_CLK_SEL_MASK,
|
|
UART2_CLK_SEL_UART2 << UART2_CLK_SEL_SHIFT);
|
|
|
|
#if (CONFIG_DEBUG_UART_CHANNEL == 1)
|
|
/* Enable early UART2 */
|
|
rk_clrsetreg(&grf->iofunc_con0,
|
|
CON_IOMUX_UART2SEL_MASK,
|
|
CON_IOMUX_UART2SEL_M1 << CON_IOMUX_UART2SEL_SHIFT);
|
|
|
|
rk_clrsetreg(&grf->gpio2bh_iomux,
|
|
GPIO2B6_MASK | GPIO2B4_MASK,
|
|
GPIO2B6_UART2_RXM1 << GPIO2B6_SHIFT |
|
|
GPIO2B4_UART2_TXM1 << GPIO2B4_SHIFT);
|
|
#else
|
|
rk_clrsetreg(&grf->iofunc_con0,
|
|
CON_IOMUX_UART2SEL_MASK,
|
|
CON_IOMUX_UART2SEL_M0 << CON_IOMUX_UART2SEL_SHIFT);
|
|
|
|
rk_clrsetreg(&grf->gpio1dl_iomux,
|
|
GPIO1D3_MASK | GPIO1D2_MASK,
|
|
GPIO1D3_UART2_RXM0 << GPIO1D3_SHIFT |
|
|
GPIO1D2_UART2_TXM0 << GPIO1D2_SHIFT);
|
|
#endif /* CONFIG_DEBUG_UART_CHANNEL == 1 */
|
|
|
|
#endif /* CONFIG_DEBUG_UART_BASE && CONFIG_DEBUG_UART_BASE == ... */
|
|
}
|
|
#endif /* CONFIG_DEBUG_UART_BOARD_INIT */
|